Mixers 128 Items

ETERNAL Crossfader is an inductive fade technology based on a magnetic control patented by Ecler. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field created between two sets of coils. This electromagnetic modulation controls an assigned Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless technology is combined with a custom high quality glides mechanism to offer a very smooth touch and succeed the most accurate Crossfader system.

The ETERNAL concept does have obvious advantages upon other existing Systems using optical technology. Unlike optoelectronic elements, the inductive concept is resistant to smoke, moisture, temperature and aging. Other electromagnetic systems found on the market are particularly sensible to the lateral room of the mechanism, and have heavier mobile elements (magnets or iron plates) that add an excessive weight to the crossfader. Such systems usually have a strange feel that can bother highly precise manipulations such as Scratching and Beat Juggling.

Field technology tested over 20.000.000 Operations, Eternal Crossfader is the revolutionary fader admired for turntablism djs and hip hop community. Suitable with NUO2.0, and the NUO3.0, NUO4.0 and HAK Series legacy products.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Contactless Fader by Jesse Dean for your Reloop SPIN turntable.

The JDDX2R-SP is the same design built of the legendary JDDX2RS-A - with extra capability!

No need to take out and calibrate each time - calibrate from the top!

It’s dual rail slide contactless element gives it durability for an aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors and circuitry. There is virtually no cleaning needed with this contactless element.

- Dual rail 45mm slider for stability and smooth action
- Magnetic sensor contactless circuitry
- Two side cut-in adjustment
- Switchable from double cut to 2 channel capability
- FR4 fiberglass PCB faceplates
- Full size fader cap by Cooler Caps!
- 30 second easy installation
- Comes with cut adjuster screw driver

JDDX2R-SP calibration instructions: http://www.zendell.uk/LINKS/JDDX2RS-A_calibration.pdf

JDDX2R-SP double cut instructions: http://www.zendell.uk/LINKS/JDDX2R-SP.pdf

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Jesse Dean Contactless Scratch Fader for your Stanton STX portable turntable.

The all new high performance fader for ultra fast cuts.

Digitally controlled.

The fader features billet aluminum rail blocks for a robust construction.

Extremely easy cut-In adjustment without having to remove your fader.
Simply calibrate your fader from the top!

45mm glider travel with standard mounting hole pattern for preferred alignment.

Kit includes:

• JDDX2R-SX fader
• Black JDD fader plate
• Black fader cap
• Mini screwdriver for cut adjustment

JDDX2R-SX calibration instructions: https://www.youtube.com/watch?v=Gm3RpM8ughI&t=3s
Stock fader calibration instructions: https://www.youtube.com/watch?v=4o4nG07CUcA

Get up and running quickly at any gig.

READY FOR DIGITAL OR ANALOG

DJs always need a dependable mixer. M101USB fits the bill perfectly as a highly adaptable two-channel mixer for virtually any DJ. M101USB lets you get up and running quickly whether you’re using a computer, turntables or CDs. M101USB is right at home at weddings, parties, clubs and everything in-between.

MIX YOUR MUSIC YOUR WAY

Beginners and seasoned DJs alike who want a durable USB-equipped two-channel solution will find M101USB a perfect fit. M101USB builds on the two-channel M101 mixer with the addition of an easy-to-use USB audio interface for DJs who want the option of working with their computer as well as traditional analog I/O.


TWEAKABLE TUNES

Beyond simply mixing, M101USB has a built-in EQ so that you can fine tune your mix depending on the room or the tracks themselves. Two pairs of switchable Phono/Line inputs are included along with a crossfader, ¼” mic input and stereo RCA line output for connection to an amplifier, powered speakers or another mixer. M101USB can be rack-mounted and features Numark’s legendary industrial-grade durability.

GET CONNECTED

Connecting M101USB to your computer is a snap using a single USB cable. Once connected you can use your computer as an audio source or record your sets straight to your computer's hard drive. If you're a computer DJ on the move and need solid, dependable two-channel performance, look no further than the M101USB mixer.

FEATURES

Two-channel rack-mountable mixer with USB
USB audio built in for playing from or recording to your computer
Two pairs of Phono/Line inputs
Built-in 2-band EQ for quick, easy sound tweaks
1/4-inch Mic input for voiceovers and announcements
Stereo Output for easy connection to amps, powered speakers or another mixer
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M101USB Mixer
Power Supply
Quickstart Guide

Manual: http://www.numark.com/images/product_downloads/m101usb___quickstart_guide___v1.0.pdf

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

FEATURES

Inputs: two phono/line switchable (RCA), two line (RCA), mic (1/4")
Outputs: Master (RCA), Record (RCA), Headphone (1/4" stereo)
Three-band EQ and gain on each channel
EQ and gain on mic channel
Replaceable crossfader with reverse and slope-controls
Crossfader-style cueing

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Product Dimensions: 11.4" x 9.5" x 3.6"

Manual: http://www.numark.com/images/product_downloads/m2_quickstart_guide_v1_0.pdf

REVOLUTIONARY NON-CONTACT TECHNOLOGY
The internationally lauded Innofader by Audio Innovate is now retro-fittable to all Reloop devices that are identified as „Innofader Compatible“.

MORE THAN 4 MILLION CYCLES: OPTIMIZED FOR THE HARDEST SCRATCHING APPLICATIONS
The RMX Innofader has been specially developed to give users an effortless, professional performance even under the most rigorous use in the toughest conditions. Audio Innovate‘s revolutionary non-contact technology has created a fader that is perfect for the needs of professional DJs. The RMX Innofaders are accurately calibrated and ready for immediate use in any compatible Reloop product; however, the performance can also be personalised with the added ability to fine-tune the Cut-in and Cut-out points.

EASY AND QUICK MOUNTING
The RMX Innofader represents the utmost quality throughout its design. The fader shaft is grounded to protect the integrity of the audio signal, and the design is tested to work for 4 million movement cycles – ensuring a long and reliable lifespan. The Reloop RMX Innofader is quick and easy to install on the professional RMX-22i/33i/60/80 and RMX-90 DVS mixers. Inside the box, a blue performance fader cap is included to complete the package.

FEATURES
• Revolutionary non-contact fader (mini Innofader by Audio Innovate)
• Designed to last more than 4 million cycles
• Quick mounting
• Cut-in and cut-out points can be calibrated
• Buttery smooth operating tension for perfect scratching
• Factory pre-calibrated for tight cut points
• 3-pin adapter cable for Reloop mixers included
• Fader shaft with brush grounding for even more reliable applications
• Compatible with Reloop RMX-22i/33i/44 BT/60/80/90 and all future Reloop products with INNOFADER compatible logo
• Incl. blue fader cap

TECHNICAL DATA
• Dimensions: 72 x 14.5 x 17 mm
• Weight: 26 g

Manual:
https://www.reloop.com/media/custom/upload/Reloop-Calibration_PDF_RMX_innofader_Web.pdf
https://www.reloop.com/media/catalog/product/pdf/2/3/4/234052_Reloop_IM.pdf

2-CHANNEL BLUETOOTH DJ MIXER IN COMPACT CONSTRUCTION
The RMX-10 BT is a compact 2-channel DJ mixer, which facilitates wireless music streaming directly to the mixer via the integrated Bluetooth interface.

BUILT-IN BLUETOOTH CONNECTIVITY
This way it is possible to use a smartphone or tablet as playback source and route the signal through the mixer. The Bluetooth signal can be routed to both channels.

45 MM CROSSFADER AND TWO SMOOTH-RUNNING LINE FADERS
Moreover, the 45-mm crossfader is user-replaceable and the smooth linefaders make mixing more comfortable.

CHANNEL STRIPS WITH 3-BAND EQ AND GAIN ADJUSTMENT
Each channel has an individual gain control and 3-band EQ that raises or lower the frequencies at 100 Hz, 1 kHz and 10 kHz.

6.3 MM HEADPHONES OUTPUT & MIC INPUT
The RMX-10 BT has a 6.3-mm microphone input with separate volume adjustment, as well as a 6.3-mm headphones output with volume adjustment and cue-mix function.

ROBUST ALL-METAL CONSTRUCTION
Master output volume can be monitored via LED level chains. The space-saving and sturdy construction is made of metal.

•2-channel Bluetooth DJ mixer in compact design
•Bluetooth connectivity: wireless music streaming directly to your mixer
•Extremely space-saving and robust all-metal construction

FEATURES
•2-channel Bluetooth DJ mixer in compact construction
•Built-in Bluetooth connectivity: wireless music streaming from your smartphone/tablet directly to your mixer
•Flexible Bluetooth routing on both channels
•Replaceable 45 mm crossfader and two smooth-running line faders for mixing
•Channel strips with 3-band EQ and gain adjustment
•6.3 mm headphones output with volume control and cue mix function
•6.3 mm mic input with dedicated volume control
•Master signal LED level chains
•Extremely space-saving and robust all-metal construction

TECHNICAL DATA
•Power supply: AC 100 - 240V, 50/60 Hz
•Power consumption: 3.5W
•Frequency response: 20 Hz - 20 kHz
•Inputs: 2x Phono RCA, 2x Line RCA, Mic TS, 1x Bluetooth In
•Outputs: Master RCA, Rec RCA, headphones 6.3 mm jack
•EQ range at 100 Hz, 1 kHz, 10 kHz
•Dimensions: 180 (w) x 260 (d) x 70 (h) mm (potentiometers: 21.5 mm)
•Weight: 1.72 kg
•Accessories included: Power cord and operating instructions

Der Kutter ist das ideale Übungstool für alle Turntablists, die auch unterwegs nicht darauf verzichten wollen, an ihren Routines zu feilen. Im Gegensatz zum Frisk Fader verfügt der Kutter über zwei Audioeingänge, wobei Kanal 2 auf „through“ gestellt werden kann um die Musik im Hintergrund auch bei bewegtem Fader durchlaufen zu lassen. Der Kutter bietet eine Crossfader-Reverse-Funktion, auch bekannt als Hamsterswitch. Das kratzfeste Gehäuse verfügt über ein elegant schlankes Design und funktioniert dank der analogen Schaltung ohne Batterien. Über den Audio Ausgang wird der Kutter beispielsweise an eine Stereoanlage oder einen aktiven Lautsprecher angeschlossen. Drei Miniklinke-Kabel gehören zum Lieferumfang.

Features
⦁ Transportabler Crossfader
⦁ inkl. 3x Miniklinke-Kabel und Klettband zur fixierung
⦁ Stereofader (Cuts auf beiden Seiten)
⦁ 2 Eingänge
⦁ 1 Ausgang
⦁ Hamsterswitch (Crossfader-Reverse)
⦁ Post-/Throughfader (Kanal 2)
⦁ Schlankes Design
⦁ Top-Panel ohne störende Schrauben (auf Unterseite geschraubt)
⦁ Betrieb ohne Batterien
⦁ Designed by STOKYO Japan
⦁ Montiert in Japan
⦁ Verpackung aus wiederverwertetem Material
⦁ Farbe: rot

Lieferumgang:
Kutter, 3 Miniklinke-Kabel, Anleitung, Klettband
Abmessungen: 40 x 78 30mm
Gewicht: 40g

Since the introduction of the first portable DJ Fader, the Frisk Fader, STOKYO has been working on the next generation...here it is the, KUTTER.
Designed to work on portable turntables, iPads and other audio sources, the KUTTER now can work as a full on fader cutting on both sides.
With two inputs, one out, post and thru assignments for audio, reverse switch for the scratcher in you, this fader has everything.
Connect one turntable or even two for mixing!

Quality assurance from STOKYO

Features
portability (keeping’ it portable)
stereo fader (cut on both sides)
2

inputs and 1 output
reverse switch (hamster capability)
pre/post for stereo fader to use with 2 x sound sources and 1 Kutter (use with
2 TTs)
slim design (just a bit larger than Frisk Fader)
custom casing, (non generic case, scratch resistant sand blast finish)
clean design, screw-less top panel (screws on bottom) for scratchers
analog build (no batteries or charging necessary)
1
year limited warranty
Designed by STOKYO Japan
Assembled in Japan
Rohs and CE compliant
Packaging made from recycled material and recycable
Package includes 3 x 1/8" mini jack cables
\Manufactured and Distributed by STOKYO

Made in Japan