DJ Equipment 279 Items

SME construction, high-quality cherrywood edition for superior cushioning; audiophile cables with gold-plated ports; weight: 10g.

Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its interaction with your tonearm and turntable.

Before testing your cartridge, please verify the HiFi system’s functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.
The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level.

Please refer to your turntable and tonearm’s instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and antiskating according to the cartridge’s recommended technical data, and adjust stylus overhang.

The new 15-track fine pressing

Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:

1. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
2. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
3. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
4. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
5. Reference tone 1000 Hz 5 cm/sec rms Left
6. Reference tone 1000 Hz 5 cm/sec rms Right
7. Reference tone 1000 Hz 5 cm/sec rms Left
8. Reference tone 1000 Hz 5 cm/sec rms Right
9. Tracking ability, lateral 50 ?m peak
10. Tracking ability, lateral 60 ?m peak
11. Tracking ability, lateral 70 ?m peak
12. Tracking ability, lateral 80 ?m peak
13. Tracking ability, lateral 90 ?m peak
14. Tracking ability, lateral 100 ?m peak
15. Square Wave Form 2.7 msec duty cycle 3:7
* The record has a constant velocity amplitude throughout the sweep.

1-4 Frequency sweep – a tool for checking frequency response
There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.

5-8 Reference tone for testing channel output
With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.

9 -14 Tracking ability test, 315 Hz lateral modulation
These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge’s tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained.

15. Square Wave Form 2.7 msec duty cycle 3:7
When monitoring the output of your cartridge with an oscilloscope you’ll then see a square wave located precisely above each other if the connection from the cartridge is correct.

After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear.

To maintain optimal sound reproduction and to minimize wear on your records as well as on your stylus, we recommend the following procedure before and after each playback:
• Remove dust carefully from record surfaces by using a fine antistatic brush or cloth before every use.
• Please remember to remove dust from the diamond tip before and after playback of each record
• I order to keep electrical contacts clean and to lubricate the knurled nut on the tonearm, Ortofon recommends occasionally a light spray of contact cleaner like DeoxIT ®Gold G-Series into the tonearm socket.

It should be noted that some phono equalizers may generate some tone distortion, which cannot be referred to the cartridge.

User Guide: https://www.ortofon.com/media/148619/ortofon-test-record-user-guide.pdf

Sometimes it is the little, simple things in a DJ's life that make the job easier: Reloop's vertically adjustable, foldable Laptop Stand Flex is the right choice when there is not much space in the DJ booth or if you need a light, absolutely sturdy laptop stand for the road. When folded, Reloop''s Laptop Stand Flex can be placed in every equipment bag thus becoming a safe, rugged companion for your club gigs. And thanks to the vertical adjustment it can be adapted to every setup.

FEATURES
• Extremely sturdy laptop stand for digital DJs, musicians and producers
• Optimized for laptops from 13'' - 16''
• Easily foldable in no time
• Paddings avoid slipping of equipment
• Simple assembly in a matter of seconds
• Available in black

TECHNICAL DATA
• Max. load capacity: 8.0 kg
• Dimensions tray: 240 x (max.) 400 x 265 mm
• Dimensions (when folded): 280 x 350 x 62 mm
• Weight: 2.21 kg
• Supply without decoration

A Digital DJ looking for a professional case solution for your NI F1/X1/Z1 controller? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI-Kontrol F1/X1/Z1 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the F1/X1/Z1 controller, the Case is perfect for travelling DJ's that need to protect their equipment.

Weight 0,42 kg / 0.9284 lbs
EAN 8717228276934
Color Black
Outer Dimensions (W x H x D) cm: 33 x 16 x 6 | inch: 13 x 6.2 x 2.4
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Fits NI Traktor Kontrol F1
NI Traktor Kontrol X1
NI Traktor Kontrol Z1

Smooth running of the record ensures high sound quality without acoustic disturbances. Our aluminum record stabilizer weighs 420 g and distributes the weight evenly on the record. The increased contact pressure of the vinyl on the turntable ensures more even scanning.

You can use the Stabilizer universally for all turntables. We deliver the weight including a box for safe storage.

Vinyl Care by HHV was developed for the special needs of passionate vinyl collectors. Each product incorporates the experience and wishes that we at HHV have gathered in countless conversations with customers. All Vinyl Care products are delivered in stylish packaging and are also suitable as a gift idea for record lovers.

Store your mixtapes and radio plays in style in our cassette rack. The 385 x 385 x 50 mm shelf, which is made of pine wood and painted white, has space for a total of 48 cassettes.
The cassette rack is part of the Vinyl Care by HHV product range, which stands for high-quality, clearly designed and affordable solutions for passionate vinyl collectors.

Whether music cassettes or radio plays - cassettes are real collector's items that are worth storing well and presenting attractively. Our cassette rack is made of black lacquered pine wood and offers space for a total of 48 cassettes in three rows.
Vinyl Care by HHV stands for practical storage and cleaning products for music lovers. All products in the series impress with their clear design and uncompromisingly good quality.

Dimensions: 385 x 385 x 50 mm

There is space for around 40-50 records in this practical record stand, which invites you to browse. Thanks to its powder-coated metal construction, dimensions of 25 x 25 x 23 cm and clear design, the stand fits into any room and is also suitable for professional use.
We have developed Vinyl Care by HHV for passionate vinyl collectors. In addition to practical cleaning products for vinyl, we offer storage solutions and gift ideas under this label that will make every record lover's heart beat faster.

The black vinyl stand offers space for storing 40-50 records. It is made of powder-coated metal and is ideal for professional and home use. Measuring 25 x 25 x 23 cm and with its clear design, the stand is an ideal storage option for all records that you want to have to hand quickly.
Under the Vinyl Care by HHV label, we present high-quality care and storage solutions for vinyl collections. We stand for top quality at affordable prices and take feedback from our customers as an incentive to continuously develop our products.

Our popular aluminium record stabilizer is finally available in the trendy color gold. The 416-gram stabilizer weight can be used universally for all record players. It increases the contact pressure of the record on the platter and thus ensures more even tracking. The stabilizer is supplied in a practical storage box.
We have developed the Vinyl Care by HHV product range especially for vinyl collectors who are looking for practical and stylish care products for their records. All products make excellent gifts.

Made in Japan, STOKYO turntable replacement headshell

Official STOKYO headshell same type as you will find on Technics SL-1200
High Quality finish (Matte)
Lead wires (Shielded)

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" Orange).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on STOKYO Thin Press©️ Orange 12" Vinyl

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" White).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on WHITE on STOKYO Ultra-Thin Press©️ Vinyl (6% Lighter than Orange!)

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

Covered with eco-friendly premium leather, the Bellroy Pod Jacket Pro is a hardshell construction equipped with lanyard holes that allow keys and accessories to be attached, cut-out for the charging connection, pressure point for the pairing button as well a small hole for the status light, while there's tonal Bellroy branding embossed at the shell. Dimensions: approx. 65 x 45 x 25 mm. 100% eco-friendly premium leather and durable polymer.

comfortable, solid, universal shoulder pad for
heavy bags and long journeys
a heavy velcro closure makes the pad attachable
to any of our bags with 50mm wide straps.

especially developed for our chateau vinyl record bag range

material: certified cordura nylon

handmade in germany

pictures: airbagcraftworks.com

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

A Digital DJ looking for a professional, durable case solution for your Universal Audio Apollo Twin / MKII controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio Apollo Twin / MKII controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Weight 0,47 kg / 1.034 lbs
Outer Dimensions cm: 16 x 15.8 x 6.8 | inch: 6.29 x 6.22 x 2.6
Inner Dimensions Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Universal Audio Apollo Twin
Universal Audio Apollo Twin MKII

Features:

• Durashock molded EVA foam
• Fits Universal Audio Apollo Twin MK2 controller
• Heavy duty handle
• Easy grip zipper pulls

The CTRL CASE SP-404 is specially designed to hold the Roland SP-404, SP-404SX or SP-404A sampler. Crafted from durable and lightweight Durashock molded EVA foam and a water-rejecting polyester exterior, it is furthermore equipped with a removable (velcro) foam that provides extra protection for all encoders, knobs and buttons.

FITS

Roland SP-404
Roland SP-404SX
Roland SP-404A

BASICS

Crafted from 5 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-foam to protect knobs and pads
Compatible with Decksaver® cover
Fits in every MAGMA bag

SPECS

Outer measures: 30 x 21 x 8 cm
Inner measures: 27 x 18,5 x 5 cm
Weight: 0,4 kg


Color: black (Item-No.: 48015 / EAN-Code: 4041212480156)

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Circuit Tracks/Rhythm? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Circuit Tracks/Rhythm, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Circuit Tracks/ Rhythm
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
29,50cm

HEIGHT
25,00cm

DEPTH
7,00cm

WEIGHT
0,99kg

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

STYLOPHONE S1
THE ORIGINAL POCKET SYNTHESIZER
The unique sound of the Stylophone has been used by everyone from Bowie to the White Stripes.

The latest Stylophone features the same iconic, analog sound as the original, first released in 1968.

The Stylophone is easy to play, keyboard operated and you can take it anywhere!

EASY TO PLAY
Play by tapping and sliding the connected stylus along the touch-sensitive metal surface. Each segment on the surface plays a different note. It’s easy to play, perfect for beginners and experienced musicians!

PORTABLE & BATTERY-POWERED
At less than 12cm wide, the Stylophone will fit right in your coat pocket. It runs on 3 x AA batteries, and features a built-in speaker and headphone socket – so you can play it everywhere you go.

CONNECT TO YOUR OTHER GEAR
Connect the Stylophone to your computer and other gear to enhance your sound possibilities! Use a 3.5mm Stereo cable to connect into the line input on your PC, and use your preferred software to record and manipulate your Stylophone sounds.

Video: https://youtu.be/qJ1D35aYiv0

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Frames for 7" vinyl singles

Expose, protect and enjoy your discs to the fullest 7 ”vinyl. The frames for singles of AMA integrate our system open system that allows you to change the cover with a simple gesture and listen to your little framed jewels.
Turn your walls into original interactive art galleries.

AMA's frames for singles are handcrafted, with 100% natural and ecological products.

The entire handmade process of cutting, painting and assembling is carried out in the AMA-workshop, located in Lleida (Spain).

All AMA macros include:
• Instructions and template to hang the frame.
• Screws + dowels.
• Kraft cardboard packaging.

Technical information:
• Hand-made.
• Materials: Solid ayous wood, glass and cardboard.
• Available colors: White / Black (ecological paints).
• External measurements: 244 mm x 244 mm. (Width 35 mm)
• Single visual area: 173 mm x 173 mm.

The FLUX-Hifi VINYL-BRUSH is designed to free the record on the turntable from surface dust and static charging. A completely new design combines velvet pads with an integrated carbon brush. The special office ensures a flat cleaning of the plate surface, dust particles are completely removed. The carbon brush prevents static charging of the record. How crackling and crackling noises are minimized and prevents further dusting of the record. Only when the LP is free of dust can the pickup system control the record without noise and Scan distortions. For cleaning the needle, we recommend the FLUX-Sonic, the innovative electronic needle cleaner.

• special Office for Record Cleaning
• gentle dust removal
• integrated carbon brush
• prevents static charging
• ergonomic housing
• Combination of velvet and carbon fiber brushes
• Weight: 45 g
• Dimensions: 11,5 x 5 x 3,5 cm

The carbon fiber brush is primarily used to remove static from the record. Here it is very important that the fiber and the aluminum housing are electrically connected and the aluminum is not coated, otherwise the static dissipation cannot be realized.

The velvet takes the dust from the surface. Our velvet has a pile height of 1.2mm, the fiber is a multifilament yarn with a high basis weight of 500g/lfm.

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

With this cleaning liquid specially adapted to the FLUX-Sonic, you always get the best result!

Weight: 61 g
Size: 3,6 x 2 x 9,2 cm

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

The UDG Ultimate Laptop Stand is a portable compact laptop or desk stand with rugged, reliable and ergonomic design for universal use. It is perfect for supporting DJ equipment like laptop, controller, mixer etc. It could be disassembled easily and
is constructed from solid steel with a scratch resistant powder coating and features no-slip support arms.

This table desk stand has 4 line-it-up bars and 2 support bars for with solid adjustable 4 height alignment, comfort, and convenience. Set it low for a minimal clearance of 6.75” or set it up to 11.5” high. The 10.75” long support arms hold gear with a width of 9” or greater and, by adding the included extensions, it can be extended to fit that extra wide 17" laptop or other gear.

The laptop stand design leaves your laptop or other device well ventilated and reduces the risk of overheating.

FEATURES:

• Adjustable height / width
• Fits laptops 13-17 inches, iPads and Controller
• Solid and easy to assemble laptop/controller stand for DJs/Producers
• Safe & reliable device placement
• Rugged, durable metal construction, anti-scratch resistant powder coating
• Stable & ergonomic tabletop design

Dimensions:
28 x 26 x 35 cm (Breite x Höhe x Tiefe)
11 x 10,2 x 13,7 inch (Width x Height x Depth)

Weight:
1,4 kg
3 lbs

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. The HHV x UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the HHV x UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The HHV x UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This HHV x UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition) - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio Arrow/ Apollo Solo? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Arrow/ Apollo Solo, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

• Weight: 0,57 kg / 1.254 lbs
• EAN: 8718969211673
• Outer Dimensions (W x H x D): 22 x 16.6 x 6.9 cm | 8.7 x 6.5 x 2.7 inch
• Inner Dimensions (W x H x D): 18 x 12.6 x 5.9 cm | 7.1 x 4.9 x 2.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Universal Audio Arrow / Apollo Solo

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: silver
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

The Reloop Laptop Stand Flat is an intelligent and sturdy solution for all DJs who require an increased work surface. Despite its extremely flat construction and thanks to the flexibly mountable subtray unit, it is possible to use this device for external sound cards or timecode based interfaces. Especially convenient: The subtray unit can be mounted behind or beneath the laptop in order to route all cables of turntables and CD players bundled to the interface. The Reloop Laptop Stand Flat is also ideal as increased work space for MIDI controllers or keyboards as, thanks to its absorbing construction, any DJ periphery can be triggered comfortably.

FEATURES
• Sturdy laptop stand for digital DJs, musicians and producers
• For all common controllers and laptop computers up to 16''
• Anti-slip and anti-vibration protection due to extra wide padding
• Interface tray for sound cards, etc.

TECHNICAL DATA
• Dimensions: 303 x 122 x 273 mm
• Dimensions Tray: 31 x 47 x 148 mm
• Weight: 2.10 kg
• Supply without decoration
• Incl. 4 screw clamps

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Launchpad X? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad X, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Launchpad X
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

WIDTH
30,20cm

HEIGHT
30,20cm

DEPTH
4,00cm

WEIGHT
0,99kg

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!