DJ Equipment 279 Items

Fits Pioneer PLX-1000, PLX-500 and Technics SL-1200/1210 Mk1, Mk2, Mk3, Mk4, Mk5, Mk5G & Mk6 turntables. Designed and engineered in the UK. Sleek smoked/clear polycarbonate shell provides high level of protection, preserving the lifespan of your turntable. Simple push fit design shields tone-arm from accidental damage whilst making allowances for cables, your turntable can sit ready for operation. At home, on the road or in the club, Decksaver has your turntable covered.

Weight: 0.633 kg
Cover Dimension 45.6 × 35.5 × 7.5 cm
Fits: Technics SL-1200, SL-1210 (MK1-MK7/GR), Pioneer PLX-1000, PLX-CRSS12 and Mixars LTA/STA, Germini PT1000 turntables

Co-designed by various DJs. Especially developed for scratch and back-cueing. Very high output!

As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing. Like the QBert, DJs had a say in designing this cartridge so it would match the needs of dance floor kings.

It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task.

Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec.
7 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
5 g

For TN-200 Turntable

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

•Excellent for scratching
•Very high tracking ability
•Very low vinyl wearout

The Concorde Blue cartridge system is particularly suitable for scratching, due to the special spherical stylus. With a very high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
•Excellent for scratching
•Special spherical stylus
•Very high tracking ability
•High output voltage
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 6 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Glow N Dark version of our world famous 45A seven inch vinyl record adapter.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

Great for DJ's spinning in clubs or the perfect night light for vinyl fiends.

Made in New York City at the Wax Rax lab.

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The Reloop Modular Stand was designed to exactly fit the performance pad controller Reloop Neon, guaranteeing solid foothold with ideal working height. Ideally, the Reloop Modular Stand is positioned near a turntable, allowing comfortable access to the sample, cue, loop and effect sections. Thanks to convenient snap-in knobs, the Reloop Modular Stand's setup is quick and easy. The stand is also compatible with other modular controllers, effect devices or even the iPad and it can also be used in the studio, in order to position your desktop synthesizer or drum machine at an ideal working height.

FEATURES
• Sturdy stand for modular controllers
• Optimized for Reloop Neon
• Quick and easy setup
• No tools necessary for setup
• Locking via snap-in knobs
• Easy setup in two steps
• Extra flat construction
• Ideal working height: perfect for positioning near turntable
• Also compatible with other modular controllers, effect devices, desktop synthesizers, drum machines or iPad

TECHNICAL DATA
• Dimensions (folded): 261 x 22 x 184 mm
• Dimensions (assembled): 261 x 185 x 184 mm
• Weight: 861 g
• Supply without decoration

The Bundle contains 5x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

How to minimize the risk of ring wear of your gateold covers? Just put your vinyl goodies respectively the record sleeves in these transparent outer sleeves to keep your collection in good shape.

Record Outer Sleeve 12" Vinyl Doppel LP Gatefold Schutzhüllen - specific details:

• dimensions: 316 x 640 x 0.1 mm
• material: translucent CPP
• selling unit: 50 pieces

Aluminium die-cast headshell, designed for AT-LP3.

Removable, universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Available in vivid red, it is suitable for 1/2" mount cartridges and 4-pin turntable arms.

Specifications:
• Angled shape suitable for AT-LP3’s straight tonearm
• Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms.
• Finger lift allows precise stylus placement
• Vivid red headshell design
• Includes lead wires and mounting screws

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The acclaimed Koss Porta Pro® has captivated audiophiles and music enthusiasts for decades and continues to be one of the most popular headphones worldwide.

Originally introduced in 1984, the Koss Porta Pro® has stood the test of time due to its impressive performance and portability. Equipped with dynamic elements that deliver a wide frequency response and deep bass, Porta Pro® offers remarkable sound reproduction producing a rich, detailed audio experience that enhances the enjoyment of music across various genres.

In addition to its exceptional sound quality, Porta Pro® offers an unmatched level of comfort. Its distinctive retro aesthetic, lightweight design and adjustable headband ensure a snug fit, while the foam ear cushions provide long-lasting comfort during extended listening sessions. Portability is another key feature, as they fold up neatly into a compact size, making them easy to carry in a bag or pocket while on the go. With its iconic design, exceptional sound quality, and enduring popularity, the Koss Porta Pro® has firmly established itself as a beloved and respected headphone option among music enthusiasts arThe acclaimed Koss Porta Pro® has captivated audiophiles and music enthusiasts for decades and continues to be one of the most popular headphones worldwide.



Originally introduced in 1984, the Koss Porta Pro® has stood the test of time due to its impressive performance and portability. Equipped with dynamic elements that deliver a wide frequency response and deep bass, Porta Pro® offers remarkable sound reproduction producing a rich, detailed audio experience that enhances the enjoyment of music across various genres.



In addition to its exceptional sound quality, Porta Pro® offers an unmatched level of comfort. Its distinctive retro aesthetic, lightweight design and adjustable headband ensure a snug fit, while the foam ear cushions provide long-lasting comfort during extended listening sessions. Portability is another key feature, as they fold up neatly into a compact size, making them easy to carry in a bag or pocket while on the go. With its iconic design, exceptional sound quality, and enduring popularity, the Koss Porta Pro® has firmly established itself as a beloved and respected headphone option among music enthusiasts around the world.



PORTA PRO is Registered in U.S. Patent and Trademark Office and is a trademark of Koss Corporation in other countries.ound the world.

Specifications:
15-25,000 Hz
60 ohms
101 dB SPL/1mW
Straight, Dual Entry, 4ft standard 3.5mm

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Model AT-VM95C
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95C
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

The Reloop Laptop Stand V.2 is the enhanced assistant for the installation of laptops or other hardware in a DJ setup. Thanks to the variable width notebooks of all sizes can be set up safely and space savingly.

FEATURES
• Robust and firm laptop stand for digital DJs, musicians and producers
• For all current laptop sizes up to 17''
• Anti-slipping and vibration protection due to especially broad cushion overlays
• 3 different widths due to removable adapter parts
• 4 different heights adjustable
• Mountable on consoles, tables or as stand-alone

TECHNICAL DATA
• Widths: 240 mm, 265 mm or 290 mm
• Heights: 235 mm, 275 mm, 315 mm, 360 mm
• Weight: 2.30 kg
• Supply without decoration
• Incl. 2 screw clamps and 2 stand rails

Record puck
Shapely stainless steel centering unit for use with singles.

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Spare parts package for the record washers Generation II + Generation II PLUS.

• 1 sealing shell incl. crank axle *NEW* with 105mm diameter *NEW*
• 2 sealing rings
• 2 spare brushes
• 2 screws for axle holder
• 2 axle holders
• 1 set of non-slip rubber feet

Also suitable as upgrade from Generation II to II PLUS!

Made in Germany!

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

A music producer/ sound engineer looking for a professional, durable case solution for your Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante, this case is perfect for the travelling A music producer/ sound engineer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Removable divider for extra cables or power adapter
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante

Specifications:
• Weight: 0,40 kg / 0.88 lbs
• Outer Dimensions (W x H x D): 23.8 x 14.9 x 8.5 cm | 9.4 x 5.9 x 3.3 inch
• Inner Dimensions (W x H x D): 22.8 x 13.9 x 7.5 cm | 8.9 x 5.5 x 2.9 inch
• Material: Durashock molded EVA foam

Stylus for Goldring E1 MM Cartridge

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Reloop RHP-6 headphones are way more than stylish DJ accessories as, oposed to many other fashion and lifestyle headphones, they do not only emphasize looks. With outstanding sound characteristics, consistent design, and manufacturing that is intended for longevity, the RHP-6 are recommended as your faithful companion: Whether on a plane, the gym or on your way to the next gig, the Reloop RHP-6 is impressive thanks to wearing comfort and smart features and unlimited listening pleasure. Small Construction Great Sound You will be surprised when putting on the RHP-6 for the first time. The amazingly powerful and transparent sound characteristics offer the highest listening pleasure without any restriction regarding mobility and wearing comfort. This is what lifestyle headphones can sound like: Pumping bass, harmonious mids and clear resolution supply a balanced acoustic pattern which will make your head nod - but do not worry, the RHP-6 fits like a seond skin. Excellent Wearing Comfort The elastic and smooth net nylon brackets with sturdy aluminium bar offer safe stability that also allows spirited listening pleasure. Due to the RHP-6's lightweight construction and the comfortable water-repelling artificial leather surface you will get the perfect mixture of robust stability and wearing comfort. And if the RHP-6 are not used, they can be easily folded thanks to the retractable construction so you can put them in your jacket pocket without any problem. Smart Headphones Nothing is more fun than listening to music with a friend. Thanks to the music sharing function the RHP-6 offer the possibility to connect a second pair of headphones to check out the latest tracks when on the road with a friend. Moreover, the RHP-6 disposes of a Smartphone remote control incl. a mic - so you will always be reachable with optimal sound quality while you can control your playlist. A True Eye-Catcher With an absolute fresh design and love of detail, the RHP-6 is a true eye-catcher: Rubberized ear cups with rubber paint finish with bordered Reloop sign, sturdy textile cable as well as a padded and elastic nylon bracket. All components of the RHP-6 were adapted to the respective colour with differing accentuations which create an especially aligned look. Reloop RHP-6: Ear & Eye-Catcher.

FEATURES
• Ultra compact DJ and lifestyle headphones with deep bass, attuned mids and transparent highs
• Closed construction
• Smart retractable construction for easy transport
• Classy rubber paint finish
• Elastic headband with climabsorb net nylon
• Flat comfort construction: Ultra compact and lightweight for high wearing comfort
• One-sided and break-proof textile cable
• Music sharing function: A second pair of headphones can be connected for music routing
• Incl. Smartphone control: Call and music control and mic for Smartphones
• Compatible with common Smartphones such as iPhone, HTC, Blackberry that dispose of a 3.5 mm connection (two-way communication protocol)
• Gold-plated 3.5 mm plug
• Available in 7 colours: black, orange, green, yellow, blue, petrol, grey

TECHNICAL DATA
Headphones:
• Frequency range: 10 Hz - 20 kHz
• Max. input power: 100 mW
• Impedance: 32 ohms +/-15% (bei 1 kHz, 1mW)
• Driver unit: 38 mm
• Acoustic pressure: 95 dB +/-3 dB (at 1 mW)
• Speaker power: 1 mW
• Connection: 3.5 mm jack (gold-plated)
• Weight: 123 g

Microphone:
• Directivity: omni-directional
• Frequency range: 50 Hz - 16 kHz
• Impedance: 8.2 kohms
• Sensitivity: -62 dB +/-3 dB (@ 1 kHz)
• S/N ratio: -58 dB

https://www.reloop.com/media/catalog/product/pdf/2/2/7/227129_Reloop_IM.pdf

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

A producer/ musician looking for a professional, durable case solution for your Universal Audio Apollo X4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Apollo X4, these cases are perfect for the travelling producer/ musician that needs to protect their equipment.

SPECIFICATION
Specification
Weight 0,77 kg / 1.694 lbs

Outer Dimensions (W x H x D) 27.8 x 20.2 x 7.6 cm | 10.9 x 7.9 x 2.9 inch
Inner Dimensions (W x H x D) 23.8 x 16.2 x 6.6 cm | 9.4 x 6.4 x 2.6 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Universal Audio Apollo X4

A Digital DJ looking for a professional, durable case solution for your Novation Launchpad Pro MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad Pro MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 0,99 kg / 2.178 lbs
EAN 8718969214308
Color Black
Outer Dimensions (W x H x D) cm: 30.2 x 30.2 x 4 | inch: 11.9 x 11.9 x 1.6
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handle
Fits Novation Launchpad Pro MK3 Controller

A Digital DJ/ Producer looking for a professional, durable case solution for your NI Traktor X1 MK3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor X1 MK3, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Black soft fleece interior
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• NI Traktor X1 MK3

Specifications:
• Weight: 0,43 kg / 0.946 lbs
• Outer Dimensions (W x H x D): 33.8 x 14.4 x 6.8 cm | 13.3 x 5.7 x 2.7 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam

The Reloop RHP-6 headphones are way more than stylish DJ accessories as, oposed to many other fashion and lifestyle headphones, they do not only emphasize looks. With outstanding sound characteristics, consistent design, and manufacturing that is intended for longevity, the RHP-6 are recommended as your faithful companion: Whether on a plane, the gym or on your way to the next gig, the Reloop RHP-6 is impressive thanks to wearing comfort and smart features and unlimited listening pleasure. Small Construction Great Sound You will be surprised when putting on the RHP-6 for the first time. The amazingly powerful and transparent sound characteristics offer the highest listening pleasure without any restriction regarding mobility and wearing comfort. This is what lifestyle headphones can sound like: Pumping bass, harmonious mids and clear resolution supply a balanced acoustic pattern which will make your head nod - but do not worry, the RHP-6 fits like a seond skin. Excellent Wearing Comfort The elastic and smooth net nylon brackets with sturdy aluminium bar offer safe stability that also allows spirited listening pleasure. Due to the RHP-6's lightweight construction and the comfortable water-repelling artificial leather surface you will get the perfect mixture of robust stability and wearing comfort. And if the RHP-6 are not used, they can be easily folded thanks to the retractable construction so you can put them in your jacket pocket without any problem. Smart Headphones Nothing is more fun than listening to music with a friend. Thanks to the music sharing function the RHP-6 offer the possibility to connect a second pair of headphones to check out the latest tracks when on the road with a friend. Moreover, the RHP-6 disposes of a Smartphone remote control incl. a mic - so you will always be reachable with optimal sound quality while you can control your playlist. A True Eye-Catcher With an absolute fresh design and love of detail, the RHP-6 is a true eye-catcher: Rubberized ear cups with rubber paint finish with bordered Reloop sign, sturdy textile cable as well as a padded and elastic nylon bracket. All components of the RHP-6 were adapted to the respective colour with differing accentuations which create an especially aligned look. Reloop RHP-6: Ear & Eye-Catcher.

FEATURES
• Ultra compact DJ and lifestyle headphones with deep bass, attuned mids and transparent highs
• Closed construction
• Smart retractable construction for easy transport
• Classy rubber paint finish
• Elastic headband with climabsorb net nylon
• Flat comfort construction: Ultra compact and lightweight for high wearing comfort
• One-sided and break-proof textile cable
• Music sharing function: A second pair of headphones can be connected for music routing
• Incl. Smartphone control: Call and music control and mic for Smartphones
• Compatible with common Smartphones such as iPhone, HTC, Blackberry that dispose of a 3.5 mm connection (two-way communication protocol)
• Gold-plated 3.5 mm plug
• Available in 7 colours: black, orange, green, yellow, blue, petrol, grey

TECHNICAL DATA
Headphones:
• Frequency range: 10 Hz - 20 kHz
• Max. input power: 100 mW
• Impedance: 32 ohms +/-15% (bei 1 kHz, 1mW)
• Driver unit: 38 mm
• Acoustic pressure: 95 dB +/-3 dB (at 1 mW)
• Speaker power: 1 mW
• Connection: 3.5 mm jack (gold-plated)
• Weight: 123 g

Microphone:
• Directivity: omni-directional
• Frequency range: 50 Hz - 16 kHz
• Impedance: 8.2 kohms
• Sensitivity: -62 dB +/-3 dB (@ 1 kHz)
• S/N ratio: -58 dB

https://www.reloop.com/media/catalog/product/pdf/2/2/7/227129_Reloop_IM.pdf

LABEL PROTECTION FOR SINGLE RECORDS

Protective device for cleaning EP records with liquids.

Prevent your singles label from getting wet when cleaning the record. A single adapter is of course included in the scope of delivery. Handling is improved with the large handle.

• package contents: Protector case Rubber gasket x2 Rubber blade x2 Adapter for single shot x1
• weight of the case: approx. 137g
• packaging weight: approx. 220g
• pack size: 122x172x50m

The Reloop Laptop Stand LTD. is the enhanced assistant for the installation of laptops or other hardware in a DJ setup. Thanks to the variable width notebooks of all sizes can be set up safely and space savingly.

FEATURES
• Robust and firm laptop stand for digital DJs, musicians and producers
• For all current laptop sizes up to 17''
• Anti-slipping and vibration protection due to especially broad cushion overlays
• 3 different widths due to removable adapter parts
• Mountable on consoles, tables or as stand-alone

TECHNICAL DATA
• Widths: 335 mm, 310 mm or 285 mm
• Weight: 2.30 kg
• Supply without decoration
• Incl. 2 screw clamps and 2 stand rails

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

Closed-back dynamic headphones
Entry-level closed-back headphones with comfortable fit for use with home audio and video systems. Offers high-quality sound for enhanced enjoyment of movies and music.

Features:
• Newly designed 40 mm drivers reproduce clear mid-low frequencies
• Adjustable headband support provides comfortable fit even during extended wear
• Large headband delivers comfortable and stable fit
• Contoured earpads fit naturally over ears to help to provide rich bass

Specifications:
• Driver Diameter: Closed-back dynamic 40mm
• Frequency Response: 20 - 22,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 100 dB/mW
• Impedance: 40 ohms
• Weight: 210g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

ATN-XP3
Replacement Stylus for AT-XP3
Conical Bonded Stylus
Carbon fibre-reinforced ABS cantilever
Durable design for DJ application

The Vinyl Case 12" LP Record Storage Carry Case is a best-value box to store up to 50 twelve inch vinyl records at home or carry 'em to your next DJ set. It's a favorable basic item with an understated look, plus the Vinyl Case 12" LP Record Storage Carry Case is easy to assemble - you don't even need much craftsmanship to construct the Vinyl Case 12" LP Record Storage Carry Case. Made from wood, this vinyl record box is an essential piece for vinyl storage. Dimensions: approx. 35 x 20 x 34 cm.

•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

760 g layer weight to stabilize vinyl records.
Ø 70mm