DJ Equipment 1894 Items

AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q

18g adjustable through hole type headshell with OFC lead-wires.

AT-LH18H 18g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

18g TechniHard™ adjustable headshell with AT6101 quad wire.

A 18g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

15g adjustable through hole type headshell with OFC lead-wires.

AT-LH15H 15g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

15g TechniHard™ adjustable headshell with AT6101 quad wire.

A 15g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH15/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

15g adjustable through hole type headshell with OFC lead-wires.

AT-LH13H 13g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

AT-LH13OCC
13G TECHNIHARD™ ADJUSTABLE HEADSHELL WITH AT6101 QUAD WIRE
Adjustable overhang and adjustable azimuth (tilt)
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
1 hexagon wrench (for overhanging and tilt adjustment)

A 13g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

The AT-LH11H is a universal ½"-mount aluminum headshell that weighs only 11 grams – the lightest in the LH series – allowing it to be used with a wider range of cartridges on more turntables and tonearms than the other models.

With its non-threaded through-holes, the AT-LH11H is ideal for mounting cartridges with threaded mounting holes, such as the AT-OC9X, AT-ART9X, and VM95 Series cartridges. Like all LH models, this headshell has a hard anodized finish that reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. The headshell includes cartridge installation screws, plastic washers, and a hexagonal wrench.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

The AT-HS4BK is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.
The AT-HS4BK features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Available in black (AT-HS4BK) and silver (AT-HS4SV).

Functions:
• Universal ½"-mount headshell for 4-pin tonearms
• Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
• Angled shape suitable for straight tonearms
• Finger lift enables precise stylus placement
• Includes lead wires and mounting screws

Specifications:
• Material: Aluminum
• Connector: Aluminum
• Weight: 8.5 g (0.3 oz), including lead wire
• Dimensions: 12.5 mm (0.5") H × 20.7 mm (0.8") W × 54.0 mm (2.1") D
• Accessories: Installation screws (10 mm × 2, 8 mm × 2), nuts x 2, plastic washers x 2

The AT-HS4BK is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.
The AT-HS4BK features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Available in black (AT-HS4BK) and silver (AT-HS4SV).

Functions:
• Universal ½"-mount headshell for 4-pin tonearms
• Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
• Angled shape suitable for straight tonearms
• Finger lift enables precise stylus placement
• Includes lead wires and mounting screws

Specifications:
• Material: Aluminum
• Connector: Aluminum
• Weight: 8.5 g (0.3 oz), including lead wire
• Dimensions: 12.5 mm (0.5") H × 20.7 mm (0.8") W × 54.0 mm (2.1") D
• Accessories: Installation screws (10 mm × 2, 8 mm × 2), nuts x 2, plastic washers x 2

Aluminium die-cast headshell, designed for AT-LP3.

Removable, universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Available in vivid red, it is suitable for 1/2" mount cartridges and 4-pin turntable arms.

Specifications:
• Angled shape suitable for AT-LP3’s straight tonearm
• Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms.
• Finger lift allows precise stylus placement
• Vivid red headshell design
• Includes lead wires and mounting screws

High quality printed ARTS slipmat.

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

Not only the care of your records, but also that of the turntable needle makes a significant contribution to extending the life of vinyl and increasing the sound quality. With our carbon fibre needle cleaning brush, we offer you an important tool that helps you cleaning the record player needle effortlessly. The brush removes dust and dirt and prevents static charging of the needle. We recommend regular cleaning.

The Vinyl Care by HHV product series stands for best quality and an excellent price-performance ratio. The care products for records have been specially developed for the needs of passionate vinyl lovers and come in stylish Vinyl Care packaging.

The vinyl dry cleaner is equipped with a sticky bottom, so it's easy to handle on a record player. Thanks to the ground cable, the adjustable Vinyl Trockenreinigungsarm eliminates static charge.

760 g layer weight to stabilize vinyl records.
Ø 70mm

760 g layer weight to stabilize vinyl records.
Ø 70mm

The analogis Vinyl Workmat is a pad for the professional cleaning of vinyl ecords and CDs. It works best with analogis DeDuster 3345.

Special synthetic lube oil for turntable plate bearing with excellent viscosity. Content: 4 ml.

Set of 4, interior conductor: 99.99999% pure copper, gold-plated jacks.

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

aluminum, weight: 9g.

aluminum, weight: 9g.

The analogis DeDuster Vinyl Silikon Roller was made to clean vinyl records. It's washable and durable, it'll clean your records for ages.

analogis record puck for big hole jukebox 7 inches.

200W PREMIUM BATTERY POWERED PORTABLE PA

Premium Portable Sound
The Alto Professional Busker is the battery-operated PA for the active on-the-go musical performers who demand top-tier sound in a portable solution that will be at home on any stage. With its optimized woofer and tweeter pairing for 200 watts of output, Busker delivers clear, focused sound that makes your music shine in any environment. Connect your mics and line level instruments or devices with the integrated 3-channel mixer with easily accessible control knobs to dial-in volume without stopping the music.

Powerful and Polished Performances
Give your vocals or guitars some extra shine and polish with the built-in Alesis FX processing for world class sound in even the most intimate settings, complete with dedicated knobs to adjust amounts independently. Busker features Bluetooth on Channel 3 to wirelessly stream backing tracks from your smart device. Play rhythm tracks while you jam along or rehearse with your favorite metronome app to keep your fingers loose before showtime. While you have your smart device out, pull up the free Alto App for iOS and Android to quickly load your favorite configuration settings. An available 1/8th AUX input means you can connect your favorite sound sources like drum machines or groove boxes to keep you on beat with one simple connection.

Road-Tested, Always Ready to Roll
Busker is built to travel from gig to gig seamlessly with a compact footprint that retains enough heft to pump out tight, punchy sound. A rugged, durable exterior will stand up to the grind, while delivering the sound performance you can count on, night after night. Set it vertically on stage to enjoy accurate amplification, lay on an angle to project towards you, or pole mount it to keep your audience on their feet and immersed in your tunes. A dedicated XLR out enables a direct line to FOH or other destinations for those bigger gigs, all the while letting you enjoy your familiar custom-tailored sound up close and personally.

Long Lasting Battery
Maximize power in between charges with Battery Eco Mode, providing up to 24 hours of performance power. The Alto Professional Busker brings big sound to the best performers.

Your Way to Play and Perform Anywhere:
• 200W of powerful, portable sound with 6.5” (165mm) woofer and 1” (25mm) tweeter
• Free Alto App (iOS/Android) for remote configuration and control
• Bluetooth music streaming direct from your device
• Integrated 3-channel mixer with built-in Alesis FX
• 2 XLR/TRS “Combo” inputs (for mics, instruments, & line level sources)
• Aux input for non-Bluetooth devices
• XLR Line output
• Battery Eco Mode for increased performance up to 24 hours
• Compact, lightweight design that’s easy to transport
• Use standalone or on a pole with DSP Speaker
• Use modes for best sound
• Sit, Stand, or Expand Your Busker
• Link two Buskers wirelessly via Bluetooth for stereo playback
• Flexible horizontal and vertical monitor positions

TECH INFORMATION
Output Power
Eco Mode: 50 W (peak)
Standard Mode: 200 W (peak)

Drivers
Low-Frequency: 6.5” (165.1 mm) woofer
High-Frequency: 1.0” (25.4 mm) tweeter

Max SPL
106 dB

Frequency Response
60 Hz – 20 kHz

Connectors
(2) Combo XLR-1/4” (6.35 mm) Inputs (1) 1/8” (3.5 mm) AUX Input
(1) USB Charging Port
(1) XLR Line Out
(1) RCA Line Out

Charge Port
5V, 2.1 A

Bluetooth Specifications
Profile: A2DP, AVRCP
Version: 5.0 Codec: SBC
Frequency: 2402 – 2480 MHz Maximum Transmission Power: 10 dBm Protocol: BLE Range: 100 ft. (30.5 m)

Battery
Type: 6.6 Ah, 12 V, Lithium Ion
Life: Eco Mode: up to 90 hours; Standard Mode: up to 30 hours Charging Time: 12 hours

Power
Connection: IEC
Voltage: 100–240 VAC, 50/60 Hz, 120 W; 220–240 VAC, 50/60 Hz; 120 W Fuse: 100–120 V, T1.6AL AC250 V; 220–240 V, T0.8AL AC250 V

Dimensions (height x width x depth)
11.8” x 8.6” x 10.0” 299 x 219 x 254 mm

Weight
11.9 lbs. 5.4 kg

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

taunus 1.5 | com-fi pro | premium nylon night sky

largest and most comfortable version of
our puristic and lightweight backpack
for vinyllovers, travellers and minimalists.

_additional spacious pocket on the inner backside
_smaller inside zip pocket
_holds 16inch+ laptops or up to 40 x 12" records
_cushioned back
_extra double-layered breathable mesh cushioned back
_double-layered breathable cushioned shoulder straps
_4x unique adjustable buttons closure made from recycled
genuine leather
_hidden pocket-dock velcro patch for additional pouch options
_40mm wide straps with cushioning: 55mm

material: italian premium nylon with water-repellent coating
colour: black

h:46-49 x w:42 x d:11 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

taunus 1.2 | com fi | ballistic nylon black

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: certified cordura® ballistic nylon, water-repellent
colour: black
size: 48 x 38 x 8 cm

aw2019 / 2020 collections instruments

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

taunus 1.2 | com fi | deep blue

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: water-repellent cotton canvas w/ leather buttons
colour: deep blue
size: 48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

minimalistic, cubistic everyday bag.
designed by the a2 department in cooperation with playhouse records.
made from water-repellent cotton with finest italian leather details.
holds all necessities for a modern but craftmenship conscious everyday life.

_small outside pouch on the backside
_2 inside pouches, one with small ykk zipper
_adjustable shoulder strap with embossed leather cushioning &
stiffened bottom
_space for up to 50x 12" vinyls
_bag body and top not cushioned, just lined

material: water-repellent cotton & premium leather

colour: deep blue

made in germany

33 x 33 x 15 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo

material: water-repellent cotton w/ genuine leather details

colour: deep blue

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

highly versatile backpack & shoulderbag combination

_outer spacious zip pocket on the front
_outer pocket for bottles
_4 inside subdivisons
_traditional durable wool felt shoulder strap cushioning
_cushioned back
_adjustable and removable 40mm shoulder strap
_space for up to 17" laptops
_cushioned laptop compartment and bottom
_fits up to 35x 12" vinyl records
_embossed classic airbag craftworks logo
_made from durable, lightweight & waterproof fabric

material: cordura® nylon & genuine leather details
colour: black

made in germany

33,5 x 40 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: red

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: green

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: olive

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com