DJ Equipment 1894 Items

Guitarcable

29,49 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

14,84 €* 16,49 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

SX60

369,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Standmount Speakers

• 25mm silk dome tweeter – for refined presentation
• 165mm treated paper cone – for a smooth & even frequency response
• Precisely optimised crossovers – for a neutral, phase linear, response
• CAD modelled rigid MDF cabinet – reduces standing waves, keeping internal vibration to a minimum
• Refreshed clean design – designed to complement today’s interiors

SX60. Sound Comes First
SX60 standmount speakers build on the strengths of SX50, taking on a larger form-factor for an assured musical performance. They can work happily in bigger spaces, while still offering you flexibility in terms of placement. Speaker stands or a cabinet top, it’s your call. SX60’s combination of engineering, confident sound reproduction, and price makes them a winning combination.

Rock Solid Foundations
Hi-fi speaker engineering starts with the cabinet. Computer-aided design (CAD) was used extensively to refine SX60’s internal structures, to ensure that while the drivers are vibrating with your music, the cabinet isn’t. This means that every millimetre of movement from the drivers is directed where it should be – at you.

Stand and Deliver
SX60 speakers have a 165mm (6.5") woofer made from treated paper. Hi-fi manufacturers have used it for years, as paper’s impressive strength-to-weight ratio is matched by excellent tonality – so instruments sound rich, well defined, and real. 25mm (1") soft dome tweeters, made from treated silk, take care of the higher frequencies – with the same balance of realism and refinement.

Two Drivers, One Voice
Our team in London took great care and attention when designing the crossovers in SX60 – as they’re responsible for ensuring that each driver receives the correct frequency. Accuracy of timing and stereo imaging depend on phase remaining completely linear, from top to bottom. The result? Your music sounds engaging, energetic and real.

Engineered, Front to Back
Attention to detail on SX60 runs from front to back. There’s a neat bass reflex port, directly under the woofer, which emphasises lower frequencies to provide rich engaging sound. Spin SX60 around to reveal a pair of high-quality speaker binding posts (connectors), which can accept thick speaker cable – with or without banana plugs.

Designed for Real Life
New look SX60’s clean, understated design allows them to sit in a variety of spaces, and work well in all. Leave the grilles on to protect the drivers from little fingers, or to gain acceptance from your interior designer – alternatively take them off to celebrate your great taste in music (and speakers).

Technical specifications:
• SENSITIVITY: 89dB
• FREQUENCY RESPONSE: 41Hz - 22 kHz
• IMPEDANCE: 8 Ohms
• RECOMMENDED AMPLIFIER POWER: 20-100 watts
• DRIVERS: Tweeter: 1 x 25mm (1") silk dome tweeterMid/Bass: 1 x 165mm (6.5") doped paper cone
• CROSSOVER: 2 way
• PORTED: 1 front
• COLOUR: Black Matte
• DIMENSIONS (HXWXD): 340 x 200 x 272mm (13.3 x 7.9 x 10.7")
• WEIGHT: 5.0kg (11lbs)

Go to Item

Solo (MM Phono-Vorverstärker)

229,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moving Magnet Phono Preamplifier

Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Stage?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• GAIN @ 1KHZ: 39dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: 3.35mV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): ~0.09uV
• RIAA CURVE ACCURACY: +/- 0.65dB 30Hz-20kHz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): >90dB
• THD+N 1KHZ (20-20KHZ BW): <0.0025%
• INPUT IMPEDANCE: 47k Ohm
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @10KHZ: >85dB
• DIMENSIONS (H X W X D): 48x176x132 (1.9x6.9x5.2”)
• WEIGHT: 0.68kg/1.5lbs
• WHATS IN THE BOX: Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead

Go to Item

Melomania P100

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Over-ear Headphones with Active Noise Cancellation

• Crafted for stunning sound – Class A/B amplification through custom 40mm diaphragm drivers
• 100-hour battery life – five minutes of charge gives up to four hours' playback
• Designed for life – with adaptive hybrid Active Noise Cancelling, seamless multi-device pairing, wear detect and gaming mode.
• Engineered by experts – aptX™ Adaptive Audio, aptX™ Lossless, Clear Voice Capture™ Echo Cancelling, Noise Suppression and Bluetooth 5.3 Multipoint Connection
• Environmentally conscious – User-replaceable battery and earpads, premium reclaimed materials and plastic-free packaging

Feel your music, everywhere
We believe exceptional sound should be a part of everyday life. Our new headphones take the incredible quality of our award-winning audio systems on the go, so you can immerse yourself in the music you love, wherever you are.

Every beat counts
Good music deserves to be played right. We’ve designed and fine-tuned the P100 across a wide range of genres, to deliver phenomenal sound, no matter what you’re listening to.

Superior amplification
Class AB amplification — core to our award-winning CX-series amplifiers — powers our signature sound. A proven technology that’s audibly better than the standard tech found in 99% of headphones.

Discovery is in the detail
Our meticulously crafted 40mm drivers preserve all your music’s energy, immersing you in sound and uncovering nuances in your music in ways you’ve never heard before.

Lossless clarity, adaptive connectivity
aptX Lossless Bluetooth delivers flawless bit-by-bit transmission of your music, maintaining uncompromised sound quality during wireless listening. Snapdragon Sound also streams at an astounding 24bit/96kHz – better than aptX HD.
aptX Adaptive intelligently monitors and maintains connection quality, for uninterrupted performance in challenging locations.

One charge. 100 hours.
Enjoy up to 100 hours of listening on a full single charge (60 hours with active noise cancelling). And if you’re running low, a 5-minute charge provides up to four hours playtime.

Active Noise Cancellation
Turn the bustling noise of the city into a sanctuary of calm. High performance adaptive hybrid noise cancelling combines an array of mics and cutting-edge technology for a truly immersive experience. To hear the environment around you, activate transparency with a single tap.

Premium Comfort, Conscious Design
Viscoelastic memory foam earcups and a soft vegan leather headband offer unparalleled all-day comfort. Lightweight aluminum details ensure maximum durability, so you can enjoy your music as it should be — anytime.

Effortless listening
Easily control your listening experience with simple, intuitive controls, and enjoy seamless compatibility with Siri and Google Assistant.
A smartphone screen displaying an equalizer app for the Melomania P100 headphones, allowing users to tailor the audio experience to their preference.

Customisable sound
We’ve tuned P100 to deliver precise highs and dynamic lows, but we get that you might want to do your own thing. Customise your listening with Melomania Connect. Create your own presets or choose from six expertly curated profiles.

Independent sound, intricate engineering
Made by music and crafted by experts, the P100 pushes the envelope in audio engineering for headphones, combining industry-leading acoustic technologies, fine-tuned for a fantastic listening experience.
Certified for superior sound quality, it guarantees lossless music, low latency, and high-resolution glitch-free audio with lower power consumption. Echo-cancelling and noise-suppression means calls are uninterrupted and crystal clear, so it’s great for both dedicated listening and daily life.

Crystal clear phone calls
Multiple beamforming microphones and Qualcomm’s latest Clear Voice Calling cVc 8.0 technology suppress background noise and deliver outstanding voice clarity.

Make the most of your music
Connect to two devices simultaneously and seamlessly switch between your playlist, a movie on your laptop, or calls on your phone—without the need to reconnect. Connect with the provided cable too, at 24bit/96kHz.

For music and for the planet
Promoting circularity and minimising waste, 100% of our rare earth neodymium and 50% of the plastic used are recycled. All of our packaging is eco-friendly and plastic-free. Both the battery and earpad cushions are user-replaceable with standard tools, ensuring long-term use.

What's in the box:
• Melomania P100
• Carry Case
• Quick Start Guide
• USB-C to 3.5mm Jack
• USB-C to USB-C

Technical specifications:
• AMPLIFICATION: Class A/B amplification
• DRIVER: 40mm three-layer composite (PEEK+PU+PEEK)
• BATTERY PLAY TIME: Up to 100 hrs (dependent on volume, settings and other factors)
• BATTERY PLAY TIME (ANC ON): Up to 60 hrs
• CHARGING TIME: <160 minutes
• FAST CHARGE: 5 minutes gives 4 hours playback (ANC Off)
• POWER SUPPLY: USB-C
• WIRED MODE: USB-C or 3.5mm Jack
• NOISE ISOLATION: Hybrid ANC
• TRANSPARENCY MODE: Yes
• WEAR DETECT: Yes
• WIND NOISE REDUCTION: Yes
• GOOGLE FAST PAIR: Yes
• VOICE ASSISTANT ACTIVATION: Yes
• MICROPHONES: 6 Mics total
• VOICE PROCESSING: 2-Mic Qualcomm® cVc™ Echo Cancelling and Noise Suppression Technology
• LOW LATENCY: <80ms - Gaming Mode accessible via Melomania Connect
• MELOMANIA CONNECT APP: Yes
• FIRMWARE UPGRADABLE: Yes - via Melomania Connect
• BLUETOOTH VERSION: 5.3
• SUPPORTED PROFILES: A2DP, AVRCP, HSP, HFP
• SUPPORTED CODECS: aptX™ Lossless, aptX™ Adaptive, AAC, SBC
• TRIPLE-CORE PROCESSOR ARCHITECTURE: Qualcomm QCC3084, Powerful tri-core processor architecture, Dual-core application subsystem 32/80 MHz operation, Single core 240 Mhz configurable Qualcomm® 32‑bit Kalimba audio digital signal processor (DSP) core, flexible clocking from 2 MHz to 240 MHz to enable optimization of performance vs.power consumption, Analog Devices ADAU1787 dedicated low power codec with FastDSP for ANC processing
• OPERATING TEMPERATURE: 0°C to +40°C
• OPERATING RELATIVE HUMIDITY: 10 to 80%, Non-condensing
• DIMENSIONS (HEADPHONE): 250 x 204 x 59mm
• WEIGHT (HEADPHONE): 330g
• COLOUR/FINISH (HEADPHONE): Black or White

Go to Item

Melomania P100

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Melomania M100

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

True Wireless Headphones With Active Noise Cancellation

• Immersive Sound – with aptX Lossless and customisable EQ
• Extended Play Battery – up to 10hrs + 23 (ANC on), 16 + 36 (ANC off)
• Active Noise Cancellation – adaptive hybrid with 3 modes + transparency
• Comfort Fit – choice of 5 pairs of ear tips, in silicone and foam
• aptX Adaptive – interruption-free sound up to 24bit/96kHz
• Bluetooth 5.3 – with greater speeds & data capacity for music transmission
• Clear Voice Capture – Qualcomm 3 mic cVc separates your voice from environmental noise

Designed by Hi-Fi Engineers, Made By Music
We’re obsessed with helping your music sound its best. M100 are our 3rd gen wireless headphones – so we’ve had a chance to really polish them.

aptX Lossless and customisable EQ settings get the most from your music. And so you don’t miss a beat – or a call – in busy areas, we added aptX Adaptive and Bluetooth 5.3 tech. They give a more stable connection for interruption-free listening.

Adaptive hybrid ANC keeps the everyday at arms-length, so you can escape into your own world. Simple touch controls, a comfy fit, and a battery that goes way beyond the ordinary round things up.

Feel Every Beat
Melomania M100 feature two generous 10mm drivers and magnets made from recycled Neodymium. The resulting powerful, but controlled, sound is one that maintains your music’s energy without sacrificing detail – regardless of genre.

Experiment with the choice of ear tips for the best seal, and to keep the sound firmly where it belongs.

Music First
Everyone deserves a great soundstage, low distortion, and high dynamic range. It’s what makes recorded music come alive.

Melomania M100 use Class AB amplification, the same type found in many of our award-winning amps, to deliver the authentic sound quality we’re known for – even when you’re on the go.

Let’s Get Personal
We’ve tuned M100 to deliver our authentic signature Cambridge sound, but we know many people have their own style.

We’ve specified a 7-band graphic equaliser in the all-new Melomania Connect app to build your own custom EQs. Plus, we’ve included 6 pre-set profiles for different music genres or spoken word listening.

Keep the Outside Out
M100 feature adaptive hybrid ANC, which uses information from Feed Forward mics, for external sound, and Feed Back mics, that detect unwanted sound in your ear canal. It automatically adjusts the noise cancellation level based on sound ingress and tightness of fit in the ears.

Enjoy music, podcasts, and calls, uninterrupted by irritating background noise.

Let the Outside In
Activate Transparency mode and shift your attention to what’s going on around you.

With Melomania M100, you can tune into the sound of your surroundings, hold conversations, and listen to public announcements – all without removing your earphones or pausing your playlist.

All Day and All of the Night
M100 continue our tradition of consigning battery anxiety to history, with up to 10 hours of continuous playback possible from a full charge – even with ANC on.

The compact, Qi wireless-compatible charging case stores an extra 23 hours (ANC on) – a lot more albums, podcasts, videos and calls! Take a 10-minute coffee-break charge for a 1.5-hour energy boost.

Your Fit, But You Know It
We supply 5 pairs of ear-tips with every pair of M100 – S & L in premium memory foam or S,M,L in silicone. Experiment to find the best combination for fit, seal and, of course, comfort.

So, whether you’re working, commuting, or simply listening to music, you’ll barely notice you’re wearing them.

High-Tech. As Standard
aptX Lossless works with compatible devices to deliver bit-exact, CD-quality audio with no compression, whilst aptX Adaptive automatically adjusts to keep the music going in busy areas like railway stations at up to 24bit/96kHz.

Bluetooth 5.3 adds extra capacity, speed, stability, and efficiency over its predecessors, helping music, podcasts, video, games and calls to sound their best.

London Calling
When you buy new headphones, they need to be great for calls too. M100 use 3-microphone cVc, a system developed by Qualcomm that helps your voice stand out above environmental noise.

A series of convenient features like Multipoint Connection, Siri and Google Assistant compatibility, reduced-latency gaming mode, and our new Melomania Connect app complete the story.

Designed for Life
Like all our products, Melomania M100 are made to last. They’re designed in London, so IPX4 water resistance was a must. Their compact case protects and charges them in your pocket. The packaging is 100% recyclable and free from plastic.

Technical Specifications:
• HIGH-PERFORMANCE AUDIO MODE: Class A/B amplification
• DRIVER: 10mm Driver Recycled Neodymium Magnets
• BATTERY PLAY TIME (EARBUDS): Up to 16 hours
• BATTERY PLAY TIME (EARBUDS - ANC ON): Up to 10 hours
• BATTERY PLAY TIME (TOTAL): Up to 52 hours
• BATTERY PLAY TIME (TOTAL - ANC ON): Up to 33 hours
• CHARGING TIME: 2.5 hours
• WIRELESS CHARGING: Yes - Qi charging
• POWER SUPPLY: USB-C, Wireless charging
• FAST CHARGE: 10 mins charge = 1.5hrs ANC On | 2.4hrs ANC Off
• NOISE ISOLATION: Qualcomm™ Adaptive Active Noise Cancelling
• TRANSPARENCY MODE: Yes
• MICROPHONES: 6 microphones, 3 per earbud
• VOICE PROCESSING: 3-microphone Qualcomm® cVc™ Echo Cancelling and Noise Suppression (ECNS)
• MELOMANIA CONNECT APP: Compatible
• VOICE ASSISTANT ACTIVATION: Siri / Google Assistant
• IPX RATING: IPX4 water splash resistant
• FIRMWARE UPGRADABLE: Yes
• BLUETOOTH VERSION: Bluetooth 5.3
• TRIPLE-CORE PROCESSOR ARCHITECTURE: Qualcomm QCC3071, Powerful tri-core processor architecture – supporting complex use cases Dual core 32-bit processor application subsystem (up to 80MHz) Single core 240 Mhz configurable Qualcomm® Kalimba™ DSP audio subsystem
• SUPPORTED PROFILES: A2DP, AVRCP, HSP, HFP
• SUPPORTED CODECS: aptX™ Lossless, aptX™ Adaptive, AAC, SBC
• WEAR DETECT: Yes
• LOW LATENCY: <80ms - Gaming Mode accessible via Melomania Connect
• NOISE CANCELLATION: Qualcomm™ Adaptive Active Noise Cancelling
• WIND NOISE REDUCTION: Yes
• GOOGLE FAST PAIR: Yes
• ADJUSTABLE EQ: Yes - 7-band adjustable EQ accesible via Melomania Connect
• OPERATING TEMPERATURE: 0°C to +40°C / 32°F - 104°F
• OPERATING RELATIVE HUMIDITY: 10 to 80%, Non-condensing
• DIMENSIONS (EARBUDS): 22 x 19.2 x 23mm
• DIMENSIONS (CHARGING CASE): 44.5 x 80.2 x 27mm
• WEIGHT: Earbuds: 6.65g each / 0.235 Ounce Charging case: 53.3g / 1.880 Ounce Total: 66.6g / 2.35 Ounce
• WHAT'S IN THE BOX?: Quick Start Guide, USB-C to USB-C charging cable, 3 x silicone eartips (S, M & L), 2 x memory foam eartips (S & L), Brand booklet, Function controls card, Safety instructions

Go to Item

Duo (MC- & MM-Phono-Vorverstärker)

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moving Coil & Moving Magnet Phono Preamp

Squeeze every inch of detail from your record collection with our highest quality moving magnet and moving coil phono stage, with integrated headphone amp; the Duo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Duo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Preamplifier?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Duo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge turntable. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Vinyl. Just for You
Enjoy the warmth of vinyl privately thanks to Duo’s integrated headphone output. Uniquely, we integrated a 6.35mm headphone jack directly into the phono stage, so you can still enjoy your records when there’s no option to play out loud.
The integrated headphone output also means no need to turn on your amplifier just to power your headphones, resulting in a more eco-friendly listening experience.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Duo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• CARTRIDGE SUPPORT: Moving Magnet | Moving Coil
• GAIN @ 1KHZ: MM: 39dB | MC: 60dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: MM: 3.35mV | MC: 305uV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): MM: ~0.09uV | MC: ~0.08uV
• RIAA CURVE ACCURACY: +/- 0.3dB 30Hz-50Hz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): MM: >90dB | MC: >70dB
• THD+N 1KHZ (20-20KHZ BW): MM: <0.0025% | MC: <0.20%
• INPUT IMPEDANCE: MM: 47k Ohms | MC: 100 Ohms
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @ 10KHZ: MM: >85dB | MC: 75dB
• DIMENSIONS (H X W X D): 48 x 215 x 159 mm (1.9 x 8.5 x 6.2")
• WEIGHT: 0.95kg (2.1lbs)
• WHATS IN THE BOX?: Alva Duo Moving Coil & Moving Magnet Phono Preamp, User Manual, Safety Guide, Mains Lead

Go to Item

AXA35

429,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Integrated Stereo Amplifier with (Built-in) Phono-Stage

• 35 Watts Power per Channel – for detailed performance at all volumes, ideal for smaller/medium sized rooms
• Built-In Phono Stage – to plug & play a vinyl turntable
• Slim Timeless Design – classic hi-fi size, with Lunar Grey aluminium trim
• Tone Controls – fine-tune sound to compensate for room dynamics
• Digital Display – white LED, clearly shows; source, volume & menus
• Headphone Socket – full size socket for high-quality after-hours listening
• Front Aux Input – 3.5mm socket to easily connect compatible devices

Sound Comes First
Our AXA35 integrated amp offers 35 watts per channel and has a built-in moving magnet phono stage – perfect for vinyl enthusiasts. A white LED dot matrix display confirms listening source, and separate tone controls mean you can adjust the sound to suit your taste. There’s a large ¼” (6.35mm) headphone socket too, ideal for high-quality listening without disturbing those who might not share your great taste in music.

Your Journey into Sound
AXA35 is the ideal amp to begin listening to music and really appreciating it – hearing detail in familiar tunes you’ve previously missed. That’s down to the toroidal transformer it uses, a tech found higher up our range. Choose a pair of speakers to suit your taste, perhaps they’ve been in the family for years or maybe something from our SX Series.

Release the Wheels of Steel
The built-in phono stage is the ace up AXA35’s sleeve. It means that you can plug a turntable straight in without any extra kit. Moving magnet (MM) compatibility means AXA35 works with a wide variety of turntables – including that vintage one you’ve had your eye on. Soon you’ll be playing the records you’ve been saving for, and planning what to buy next.

Setting the Tone
With separate bass and treble controls, you can fine-tune AXA35’s sound to suit your taste, speakers and room dynamics. The volume level is shown on the LED dot matrix display, and with 35 watts per channel you’ll have plenty of kick for smaller to medium sized rooms.

Wired for Sound
AXA35 is a well-connected amp, with no less than 4 pairs of RCA inputs, plus a pair of phono sockets for a turntable and a pair of recording outputs. There’s a rear USB socket for technical upgrades. Hi-fi quality speaker binding posts (connectors), compatible for banana plugs, mean that thick cable connects securely for an authentic sound.

Designed for Life
As with the rest of AX Series, AXA35 shares our house-style of Lunar Grey minimalist fascia, black steel cabinet and ‘floating’ base. This timeless look enables an upgrade path through our range. A slim build, in the classic 430mm hi-fi width, also means that AXA35 can easily slot, and breathe new life, into a much-loved system.

Technical specifications:
• POWER OUTPUT: 35 Watts (into 8 Ohms)
• THD (UNWEIGHTED): <0.01% @ 1kHz, 80% of rated power <0.15% 20Hz - 20kHz, 80% of rated power
• FREQUENCY RESPONSE (-3DB): 5Hz - 50kHz
• S/N RATIO (REF 1W): >82dB (unweighted)
• INPUT IMPEDANCES: 47k ohms
• POWER AMP DAMPING FACTOR: > 50
• MAX. POWER CONSUMPTION: 260W
• BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz
• STANDBY POWER CONSUMPTION: <0.5W
• INPUTS: 4x RCA, 1x Phono, 1 x 3.5mm Aux input (front panel)
• OUTPUTS: Speakers, Rec Out, USB 5V power
• DIMENSIONS (HXWXD): 83 x 430 x 335mm (3.3 x 16.9 x 13.2”)
• WEIGHT: 5.6kg (12.3lbs)
• IN THE BOX: AXA35 Integrated Amplifier, Power Cable, Remote Control, 2 x AAA Batteries

Go to Item

Alva TT V2

1.999,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Direct Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Direct Drive – Consistent drive speed with pitch-perfect audio reproduction.
• Pre-installed High-Output MC Cartridge – Pristine musical detail, custom design. Easy setup.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
You’ve spent years curating the perfect record collection, searching for hidden gems in record shops and online – because you love music. Our shared love means that we didn’t stop with Alva TT.
We pushed on to create Alva TT V2; with a direct drive system, bespoke MC cartridge, an all-new tone-arm, and Hi-Res Bluetooth with an integrated phono stage – both now switchable.
We believe that your records deserve to sound as fantastic as they look.

King of Convenience
Alva TT V2 is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. TT V2 comes with a bespoke designed cartridge pre-installed. It connects to pretty much any audio system too, thanks to a switchable integrated phono-stage. It even works wirelessly with high quality Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva TT V2 has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect TT V2 to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MC Cartridge Pre-installed
Alva TT V2’s bespoke cartridge is ready fitted – so there’s no tricky set-up, and its sound is perfectly matched to the other components in the turntable. We designed the high-output Moving Coil (MC) cartridge with an exposed cantilever. It reduces unwanted resonance and vibration, delivers high levels of gain and outstanding musical detail during playback.

Direct Drive
Alva TT V2 has a medium-torque Direct Drive motor, like its predecessor the TT. The 8 pole, 3 phase, brushless DC motor is quartz controlled to ensure accurate turntable speed. With precision control, and silent running, Alva TT V2 achieves just 0.06% wow and flutter. This means excellent pitch stability – particularly during longer, more sustained, musical notes.

Reassuringly Solid Platter
Complimenting the direct drive motor, Alva TT V2’s platter has the feel of finely polished stone. It’s made from Polyoxymethylene, a semi-crystalline thermoplastic used in precision engineering applications, where high stiffness and dimensional stability are demanded. The weight of the platter, coupled with our medium torque direct drive motor, ensures excellent speed stability during playback of records.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva TT V2 to endure, starting with a top plate hewn from 6mm aluminium plate, and layer of EVA to absorb vibration sitting on MDF. It’s cradled in a composite chassis and weighs an impressive 10.9kg. Reassuring solid construction, with great acoustic qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva TT V2 celebrates our timeless house-style. It’s the perfect match for our best-selling CX Series hi-fi separates and shares the laser-etched brand logo with our premium Edge Series.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Direct Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.1%
• TURNTABLE PLATTER: POM (Polyoxymethylene)
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 2.2kg
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 5.5W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.25W
• DIMENSIONS (W X H X D): 435 x 139 x 368mm
• WEIGHT: 10.9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: High Output Moving Coil
• CARTRIDGE FREQUENCY RESPONSE: *+/- 1dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Aluminium
• CARTRIDGE OUTPUT LEVEL: 2mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-tt-v2

Go to Item

Alva ST

599,00 €*

No Fear Of Time Slipmat (Pair)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-12-06

Belt Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Belt Drive – With simple electronic push button speed control.
• Pre-installed Moving Magnet Cartridge – A well-regarded choice, play records in minutes.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
There’s nothing quite like vinyl: the tactile pleasure of removing a record from its sleeve and carefully placing it on a deck is unique. We designed the original Alva TT to honour that tradition, and Alva ST to share that pleasure with more people.
With a pre-fitted cartridge –so you’ll be playing records in minutes – the belt-drive Alva ST also features switchable Hi-Res Bluetooth streaming and integrated phono stage.
Everyone should be able to enjoy the freedom Alva brings.

King of Convenience
Alva ST is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. Alva ST keeps it simple with perfectly matched cartridge pre-installed. Alva ST connects to pretty much any audio system too, as it has a switchable integrated phono-stage. It even works wirelessly with Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva ST has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect Alva ST to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MM Cartridge Pre-installed
After hours of listening, we selected an Audio Technica Moving Magnet cartridge to be ready fitted on Alva ST. With no fiddly set-up you’ll be playing records in minutes. The elliptical stylus provides a greater contact area with your records’ grooves, producing accurate tracking of information and, of course, great sounding music.

Belt Drive
Alva ST uses the proven belt-drive method, supplemented with electronic motor speed control. After connecting the belt for the first time, you won’t need to look under the platter again. Rotation speed selection is made by 2 neat electronic buttons on the ST’s aluminium top surface – so you can effortlessly switch between playing albums and singles.

Aluminium, Tuned
Alva ST’s platter is aluminium die-cast, finished by CNC to ensure a totally level and smooth surface. The 17mm high aluminium platter is finished with a 5mm rubber mat – a combination proven to reduce unwanted resonance.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva ST to do just that, with a 1mm aluminium top plate, and a layer of EVA to absorb vibration sitting on top of MDF. It’s cradled in a composite chassis and weighs 9kg. Reassuring solid, and with great sound absorption qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva ST shares our minimalist house style. It’s the perfect match for our best-selling Evo and CX Series hi-fi separates. Designed and engineered in London with the emphasis on classic timeless style.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Belt Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.12%
• TURNTABLE PLATTER: Die Cast Aluminium
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 645.3g (930.5g inc. rubber mat)
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 6W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.3W
• DIMENSIONS (W X H X D): 435 x 139 x 366.7mm
• WEIGHT: 9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: Moving Magnet
• CARTRIDGE FREQUENCY RESPONSE: +/- 0.5dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Alloy Tube
• CARTRIDGE OUTPUT LEVEL: 1.8~3.6mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-st

Go to Item

Black Star

24,99 €*

Pod Jacket Pro (Second Generation)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Set of 2, One-Sided Slip Mats

A portion of proceeds will go to savethechildren.org benefiting relief efforts in DRC, Sudan, Haiti and Gaza.

The artist formerly known as Mos Def, now Yasiin Bey, teams up with Talib Kweli again for a second Black Star album. This merch drops with the first widely available vinyl edition that is also available at HHV.

Go to Item

Bellroy

44,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Covered with eco-friendly premium leather, the Bellroy Pod Jacket Pro is a hardshell construction equipped with lanyard holes that allow keys and accessories to be attached, cut-out for the charging connection, pressure point for the pairing button as well a small hole for the status light, while there's tonal Bellroy branding embossed at the shell. Dimensions: approx. 65 x 45 x 25 mm. 100% eco-friendly premium leather and durable polymer.

Go to Item

Beastie Boys

Check Your Head Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Batida

UM Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN30EN Stylus

134,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

REPLACEMENT STYLUS FOR VM530EN
Elliptical Nude stylus
Nude Round Shank construction
Orange

Go to Item

VMN20EB Stylus

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN20EB
REPLACEMENT STYLUS FOR VM520EB
Elliptical Bonded stylus
Bonded Round Shank construction
Blue

Go to Item

VMN10CB Stylus

56,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN10CB
REPLACEMENT STYLUS FOR VM510CB & VM610MONO
Conical Bonded stylus
Bonded Round Shank construction
Blue

Go to Item

VM530EN

159,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM530EN
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Nude profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

High-end elliptical stylus model equipped with a light-weight nude elliptical stylus to reduce the execution mass of the vibration system. This enables fuller frequency reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 25,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Nude
Stylus Size 0.3 x 0.7 mil
Stylus Construction Nude Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN30EN
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM530EN_UM_V2_11L_web_161021.pdf

Go to Item

VM520EB

109,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM520EB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Bonded profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 23,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN20EB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM520EB_UM_V2_11L_web_161021.pdf

Go to Item

VM510CB

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM510CB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH CONICAL STYLUS
Conical Bonded stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Conical Bonded stylus for less critical tilt angle adjustment allowing more flexible use on various tonearms.
VM type dual magnet design ensures outstanding channel separation, extended frequency response and superb tracking
Lightweight tapered aluminium cantilever allows for faithful reading of the record groove
Centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB
Durable low resonance polymer housing

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 20,000Hz
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 5.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Conical Bonded
Stylus Size 0.6 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN10CB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM510CB_UM_V2_11L_web_161011.pdf

Go to Item

ATN95EX Stylus

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-06

ATN95EX
REPLACEMENT STYLUS FOR AT95EX
Elliptical diamond stylus with Bonded Round Shank
Replacement stylus for AT95EX
Available in red

Go to Item

ATN95E Stylus

29,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for AT95E cartridge

The ATN95E is also compatible with discontinued models AT93 and AT95.

Go to Item

ATN91R Stylus

24,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-29

ATN91R
REPLACEMENT STYLUS FOR AT91R CARTRIDGE
Aluminium alloy tube cantilever for the pick-up of subtle details
Replacement stylus for AT91R
Bonded conical stylus

Catalogue: https://eu.audio-technica.com/resources/catalogues/Phono_Cartridges_17.pdf

Go to Item

ATN91 Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN91
REPLACEMENT STYLUS FOR AT91 CARTRIDGE
Replacement stylus for AT91 cartridge
Compatable stylus for CN5625AL and AT90 discontinued cartridges.
Upgrade replacement styli for AT3600L

Catalogue: https://eu.audio-technica.com/resources/catalogues/Phono_Cartridges_17.pdf

Go to Item

ATN3600 LC Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP7 Stylus

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP7
REPLACEMENT STYLUS FOR AT-XP7 CARTRIDGE
Elliptical bonded stylus
Tapered aluminum cantilever
Durable design for DJ application
Tracking Force Range: 2.0 to 4.0 g

Go to Item

ATN-XP5 Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP5
REPLACEMENT STYLUS FOR AT-XP5 CARTRIDGE
Elliptical bonded stylus
Carbon ABS cantilever
Durable design for DJ application

Go to Item

ATN-XP3 Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP3
Replacement Stylus for AT-XP3
Conical Bonded Stylus
Carbon fibre-reinforced ABS cantilever
Durable design for DJ application

Go to Item

ATH-TWX9

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Earbuds

The ATH-TWX9 truly wireless earbuds offer the freedom to customize your sound space for an advanced audio experience. These headphones create an immersive audio experience and feature digital hybrid noise canceling technology. With unique features including deep-UV sterilization, 360 Reality Audio for a realistic 3D sound stage, and Snapdragon Sound™ platform for higher quality music, video, and calls, the ATH-TWX9 set themselves above the rest as the best truly wireless headphones.

Designed to connect people through sound, these hybrid headphones are equipped with advanced features making the ATH-TWX9 optimal workout headphones or commuter headphones. The splashproof headphone design (IPX4®-equivalent) makes these perfect for rain, water, and sweat. Choose from five preset noise-cancelling modes or optimize noise cancellation for your current environment simply by pressing the touch sensor on the left earbud. These non-slip, compact and ergonomic headphones are designed to ensure a secure, comfortable fit. Customize your experience with twelve different fitting eartip designs (4 diameter sizes, 3 stem lengths) for the most comfortable noise cancelling headphones.

With approximately 6 hours of continuous playback with up to 18.5 hours of extended use, these in-ear Bluetooth headphones are newly designed with 5.8 mm high-resolution drivers to deliver an extended high-frequency range and improved sound detail. Experience crystal clear call quality thanks to the Qualcomm® cVc™ Generation 8.0 technology. Minimize sound delay while playing games or watching videos with Low Latency mode. Compatible with Google Fast Pair , Sony’s 360 Reality Audio, multipoint pairing, and the A-T connect app, these headphones provide a customizable and seamless experience across devices.

Included Accessories: 30 cm (1.0’) USB-A/USB-C charging cable

Your Sound Space - A Premium Listening Experience
Combining innovative acoustic technology with a snug, comfortable fit and convenient controls, the ATH-TWX9 lets you create an intimate sound space that’s all your own.

Ambience Control - Customize Your Noise Cancellation
With five preset noise-cancelling modes to choose from, plus options for adapting noise cancellation to your current environment or for hearing the people around you, the ATH-TWX9 puts you in control of ambient noise.

Advanced Audio - Designed for Premium Sound
Newly designed 5.8 mm high-resolution drivers deliver an extended high-frequency range and improved sound detail – perfect for use with the advanced Qualcomm® Snapdragon Sound™, Qualcomm® aptX™ Adaptive audio, and Sony 360 Reality Audio technologies.

Features:
• Truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling and hear-through) can be employed for music playback and calls
• Use the touch sensor to choose from five preset noise-cancelling modes or optimized noise cancelling that adapts to your current environment
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Newly designed 5.8 mm high-resolution drivers deliver an extended high-frequency range and improved sound detail
• Compatible with Qualcomm® Snapdragon Sound™, Qualcomm® aptX™ Adaptive audio, and Sony’s 360 Reality Audio to deliver an advanced listening experience
• Eartips feature a hybrid structure of hard and soft silicone for best fit and sound performance, and come in three different lengths for each size (XS/S/M/L)
• Dual high-performance MEMS (micro-electromechanical system) mics, beamforming technology, and Qualcomm® cVc™ Generation 8.0 technology ensure crystal-clear call quality
• Sidetone circuitry improves conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Qualcomm® TrueWireless Mirroring enables independent transmission to the left and right earbuds, reducing sound interruptions and delays for videos
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6 hours of continuous playback with up to 18.5 hours of extended use
• Charging case’s deep-UV LED sterilization system (with unique mirror processing) eliminates bacteria and viruses from the surface of the headphones**
• A-T Connect app gives you additional control: activate low latency mode, personalize noise-cancelling system, adjust and save EQ to the headphones, change L/R volume balance, select desired voice assistant (such as Amazon Alexa Built-in or Google Assistant), change codecs, and more
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable

* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.
** The system is more than 99% effective against E. coli and bacteriophage viruses, and more than 90% effective against Staphylococcus aureus, but it is not effective against all bacteria and viruses. The effectiveness against the novel coronavirus has not been verified.

Specifications Headphones:
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 10 to 40,000 Hz
• Sensitivity 102 dB/mW
• Impedance 16 ohms
• Weight Headphone: Approx. 5.4 g (0.19 oz) (L side), approx. 5.4 g (0.19 oz) (R side); Charging case: Approx. 55.9 g (2.0 oz)
• Charging Time Headphones: Approx. 2.5 hours *3
• Charging case: Approx. 3.5 hours (USB charging) *3; Approx. 5.0 hours (wireless charging) *3
• Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.0 hours *3 (headphones), Max. approx. 18.5 hours *3 (if charging case is used in combination)
• Microphone Type MEMS type
• Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response 100 to 16,000 Hz
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones: DC 3.85 V lithium ion battery
• Charging case: DC 3.85 V lithium polymer battery
• Water-Resistant (drip-proof) Performance IPX4*4
• Accessories Included • USB charging cable (30 cm (12"), USB Type-A / USB Type-C) • Eartips: Short (XS, S, M, L), Standard (XS, S, M, L), Long (XS, S, M, L)

Notes
*1 When using Qualcomm® Snapdragon Sound.
*2 When using Qualcomm® Snapdragon Sound and Qualcomm® aptX™ Adaptive audio.
*3 The figures above depend on operating conditions.
*4 Headphones only.

Specifications Bluetooth®:
• Bluetooth® Version Bluetooth version 5.2
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1 kHz, 48 kHz, 96 kHz *1
• Supported Bit Rates 16 bit, 24 bit *2
• Transmission Band 10 Hz to 47,000 Hz; (when Qualcomm® Snapdragon Sound 96kHz sampling) 20 Hz to 20,000 Hz

Go to Item

ATH-TWX7

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The ATH-TWX7 truly wireless earbuds are designed to provide listeners with a high-fidelity experience and features to customise listening sessions. Leveraging the 5.8 mm high-resolution drivers from the flagship ATH-TWX9, the ATH-TWX7 offer detailed music playback, including support for 24-bit/96 kHz audio files all within a compact and easily portable design. These earbuds also provide audio-controlling features accessible with a touch of the earbud sensor to activate the digital hybrid noise canceling technology.

The ATH-TWX7 wireless earbuds use digital hybrid noise cancelling technology to eliminate unwanted noise and provide a crystal-clear sound performance. Whether users are immersing themselves in music or staying connected to their surroundings, the easily accessible hear-through and talk-through functions allows for quick adjusting to prioritise conversations or hear external announcements.

The built-in MEMS microphones, combined with beamforming technology, guarantee the speaker’s voice is heard loud and clear, even in noisy environments. Users can choose between two call modes – Natural Mode for quieter settings or Noise-Reduction Mode for bustling environments. The mute button allows for the ability to silence the microphone during calls, and the A-T Connect app provides the ability to evaluate voice tone and clarity.

Prioritising comfort, the ATH-TWX7 earbuds are designed to discreetly and snugly fit ears of all sizes. The package includes two sets of eartips in XS/S/M/L, offering the choice between comfortable, soft earbud tips for extended listening sessions or secure-fitting standard earbud tips for enhanced fit.

The built-in Soundscape feature offers audio designed for stress relief, such as tranquil nature sounds and additional choices such as ambient music for enhanced focus and soothing sounds to aid in relaxation and meditation.

With approximately 6.5 hours of playback and up to 20 hours with the non-slip portable charging case, users can take the ATH-TWX7 on the go with confidence. Also designed with IPX4 water-resistant protection, these headphones are equipped to brave rain, water, and sweat.

Included Accessories:
• 30 cm (1.0') USB-A/USB-C charging cable
• Soft earbud tips: XS, S, M, L
• Standard earbud tips: XS, S, M, L

With two beamforming microphones in each earbud, the ATH-TWX7 clearly captures your voice, even in noisy environments. Plus, you can choose from two call modes – Natural Mode (indoors/quiet) and Noise-Reduction Mode (outdoors/noisy) – to get the best audio quality anywhere.

The ATH-TWX7 lets you control your sound space. Apply the noise-cancelling function to focus on work, the talk-through function to accentuate the voices/announcements around you, or the unique soundscape function to produce sounds for concentrating, relaxing or meditating.

The compact earbuds fit discreetly in your ears, providing a comfortable listening experience for hours on end. Select from two sets of included eartips – soft and standard – to customise your fit.

Digital hybrid noise-cancelling technology, driven by small MEMS microphones in each earbud, eliminates unwanted sounds. The hear-through function allows you to listen to music while walking, playing sports, doing housework, working remotely, or using public transportation.

Using the ATH-TWX7 with the Audio-Technica CONNECT app gives you access to many additional functions, such as the low latency mode, Natural and Noise-Reduction call modes, ambience control (including presets and hear-through), EQ, touch sensor settings, soundscape function (for relaxing or focusing), and more!

Features:
• Compact, truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling, hear-through, talk-through) can be employed for music playback and calls
• MEMS (micro-electromechanical system) mics, a high-accuracy noise-cancelling processor, and a proprietary filter work together to deliver stellar noise-cancelling performance
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Talk-through function lets you hear voices/announcements around you by instantly lowering playback volume and capturing ambient sounds while enhancing the vocal bandwidth
• 5.8 mm high-resolution drivers, adopted from the ATH-TWX9, deliver an extended high-frequency range and improved sound detail
• LDAC codec compatibility enables playback of 24-bit/96 kHz audio files
• Includes two sets of eartips (XS/S/M/L): Soft eartips for greater comfort during long listening sessions and standard eartips for a snugger, more secure fit
• High-performance MEMS mics, beamforming technology, and two selectable call modes (Natural and Noise-Reduction) ensure crystal-clear call quality
• Call test function allows you to check the tone and clarity of your voice
• The microphone can be easily muted during calls via built-in controls on the earbuds
• Soundscape function plays relaxing sounds of nature, a masking noise to help you concentrate, or sounds for meditation
• Private Timer function provides advanced personal time management
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6.5 hours of continuous playback and up to 13.5 hours of extended use with the charger (for 20 hours total, when noise-cancellation is in constant use)
• A-T Connect app gives you additional control: activate low latency mode, select Natural and Noise-Reduction call modes, adjust and save EQ to the headphones, change codecs, and more
• Compact charging case with non-slip finish is easy to handle and carry with you wherever you go
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable
* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8mm
• Frequency Response 10 - 40,000Hz
• Sensitivity 100dB/mW
• Impedance 16 ohms
• Weight Headphones: Approx. 4.7 g (0.17 oz) (L side), approx. 4.7 g (0.17 oz) (R side); / Charging case: Approx. 47.5 g (1.7 oz)
• Charging Time Headphones：Approx. 1.5 hours* / Charging case：Approx. 3 hours (USB charging), Approx. 5 hours (wireless charging). Depending on operating conditions.
• Operating Temperature 5℃ - 40℃ (41℉ to 104℉)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.5 hours with ANC on and 7.5 hours with ANC off (Headphones), / Max. approx. 20.0 hours with ANC on and 24.0 hours with ANC off (if charging case is used in combination) Depending on operating conditions.
• Microphone Type MEMS type
• Microphone Sensitivity -38dB（1V/Pa, at 1kHz）
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones：DC3.85V lithium ion battery (built-in) / Charging case：DC3.85V lithium ion battery (built-in)
• Water-Resistant (drip-proof) Performance IPX4 (headphones only)
• Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips: Soft (XS, S, M, L), Standard (XS, S, M, L)
Notes *Charging takes longer when the temperature is below 10℃ (50℉) or above 30℃ (86℉). For product improvement, the product is subject to modification without notice.

Bluetooth®
• Bluetooth® Version Bluetooth Ver.5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12mW EIRP
• Frequency Band 2.4GHz band（2.402GHz～2.480GHz）
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec LDAC, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1kHz, 48kHz, 96kHz (When using LDAC codec)
• Supported Bit Rates 16bit, 24bit (When using LDAC codec)
• Transmission Band 10Hz - 47,000Hz (when LDAC 96kHz sampling), 20Hz - 20,000Hz

Go to Item

ATH-TWX7

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

ATH-SQ1TW

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

Go to Item

ATH-S300BT

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Noise Cancelling Headphones

Your Style, Your Stance.
The ATH-S300BT wireless noise cancelling headphones not only provide high-quality audio reproduction and the freedom to enjoy it anywhere, but best-in-class battery life, as well. With up to 90 hours of continuous use on full charge, you never need to worry about charging on the go. And when the battery runs low, a mere three minutes of charging will give you up to 2.5 hours of new battery life.

The ATH-S300BT wireless headphones boast advanced features like digital hybrid noise-cancelling, to let you enjoy a private, high-quality sound space, a hear-through function so you can remain aware of your surroundings when you wish, and a multipoint pairing function, allowing you to seamlessly switch between two connected Bluetooth devices.

The neutrally coloured wireless headphones feature fold-flat housings with a distinctive terrazzo marbled pattern and ergonomic earpads that fit comfortably over the ears for a sleek, attractive look. But there’s more to these headphones than just a pretty face. The headphones are also equipped with 40 mm drivers for powerful, full-spectrum sound.

In addition, the headphones are equipped with a built-in microphone for crystal-clear communication on calls, easy-touch buttons in the earcup for convenient control of volume, playback and more, and a low latency mode to minimise sound delay when gaming or watching videos. The ATH-S300BT wireless headphones are compatible with Siri and Google Assistant, and come with a 1.2 m (3.9") cable (with in-line mic and control) to give you the option of using a standard wired connection.

Power That Lasts - 90-Hr Battery Life
With the ATH-S300BT, the music – or videos or games or calls – never has to stop. The best-in-class battery life gives you up to 90 hours of playback. And when the battery’s low, a quick three-minute charge provides you with an additional 2.5 hours.

Your Sound Space - Digital Hybrid Noise Cancellation
Small MEMS microphones are built into the housings to pick up and cancel ambient noise. When selected, the system deploys both feedforward and feedback processes to give you the best active noise cancellation you can get.

Complete Your Look - Comfort and Style
We designed the ATH-S300BT wireless headphones to look and feel as good as they sound. With versatile neutral colouring, a distinctive terrazzo marbled pattern trim, and ergonomic earpads, you can count on these headphones to keep you in comfort and style. Plus, the housings fold flat for easy storage and transport.

Convenient Features - You're In Control
Select the noise-cancelling function to block outside noise and keep things quiet, or select the hear-through function to stay in touch with your surroundings and engage in conversations. As an added convenience, the headphones are equipped with a multipoint pairing function that lets you switch seamlessly between two connected Bluetooth devices.

Features:
• Wireless over-ear headphones with digital hybrid noise-cancelling technology let you enjoy a private, high-quality sound space
• Class-leading battery life with up to 90 hours of continuous use on a full charge with ANC off and 60 hours with ANC on
• Get 2.5 hours of use on a 3-minute rapid charge (via USB-C connection)
• Hear-through function allows you to hear ambient sounds (plus your own unmuffled voice) so you can talk to others around you without removing your headphones
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Sleek design with versatile, neutral colouring, distinctive terrazzo marbled pattern on the housings, and ergonomic earpads for a comfortable fit
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
Headphones
• Type Closed-back dynamic
• Driver Diameter 40 mm
• Frequency Response 20 to 20,000 Hz
• Sensitivity 103 dB/mW
• Impedance 44.5 ohms
• Weight Approx. 258 g (9.1 oz)
• Charging Time Approx. 2.5 hours
• Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time Continuous transmission time (music playback): Max. approx. 60 hours(when Bluetooth on, noise cancelling on) / Max. approx. 90 hours(when Bluetooth on, noise cancelling off)
• Microphone Type Headphones: MEMS type; Cable: Electret Condenser
• Microphone Sensitivity Headphones: -38 dB (1 V/Pa, at 1 kHz); Cable: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response Headphones: 50 to 10,000 Hz; Cable: 100 to 10,000 Hz
• Microphone Polar Pattern Headphones: Omnidirectional; Cable: Omnidirectional
• Power Supply DC 3.85 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12"), USB Type-A / USB Type-C) & Cable with inline mic and control (1.2 m (3.9')/3.5 mm (1/8") gold-plated stereo mini-plug (4 pole / L-shaped))

Bluetooth®
• Bluetooth® Version Bluetooth version 5.1
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 12 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec AAC, SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20 to 20,000 Hz

* The above figures depend on operating conditions.

Go to Item

ATH-S220BT

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Experience exceptional sound clarity with Audio-Technica's ATH-S220BT wireless headphones, featuring up to 60 hours’ battery life and multipoint connectivity.

ATH-S220BT are lightweight, relaxed-fit headphones built to provide extended comfort. Weighing in at just 180g (6.3 oz) - around the same weight as a 12" vinyl record - the ATH-S220BT headphones’ intelligent design helps prevent neck and shoulder strain so you can enjoy album after album or gaming sessions with friends.

From listening to your favourite tunes through your smartphone to browsing the latest viral videos on a laptop or tablet, you’ll experience powerful sound from every source.

Since 1962, Audio-Technica has been devoted to providing listeners with the very best in sound quality and there’s no compromise to that dedication when it comes to our truly immersive ATH-S220BT best budget wireless headphones

These affordable wireless headphones also have a quick charge feature - they can be charged in ten minutes for 3.5 hours of listening time. Plus, with a USB type A to USB Type C™ cable included, you’re able to charge with ease using a variety of different devices.

If you’re looking for the best headphones under £100, look no further. Incorporating an abundance of features, the ATH-S220BT headphones are also compatible with both Siri and Google Assistant, so you’re able to access your device’s speech recognition function at the touch of a button. Receive notifications, send messages and control your audio playback without lifting a finger.

Features:

60 Hr Battery
The Audio-Technica ATH-S220BT is an ideal choice for those looking for Bluetooth headphones with a long battery life – making them a reliable travel companion or top selection for settling down to listen to your favourite album or podcast.

Multipoint Pairing
Connect to your smartphone, PC or tablet simultaneously and take the stress away from having to switch between multiple devices.

Built-In Mic and Controls
You’ll experience exceptionally clear audio thanks to the ATH-S220BT’s high-quality built-in microphone.

Wired and Wireless Listening
For a wired audio experience, use the included 1.2m cable. With a built-in microphone and remote, the plug-in option provides the ultimate flexibility for those wishing to experience superior sound whilst conserving battery power.

Immediate Voice Sync on Videos
Whether you’re watching TikTok videos on your daily commute or enjoying the latest Netflix series, even the slightest audio lag can impact your experience. With low latency mode on the Audio-Technica ATH-S220BT, you can enjoy minimal sound delay and crystal-clear audio.

• Up to 60 hours of continuous use on a full charge and up to 3.5 hours of use on a 10-minute rapid charge (via USB-C connection)
• Slim housings with sleek, lightweight earpads exert less pressure on your ears for a comfortable fit with good sound isolation
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Google Fast Pair lets you quickly pair headphones with an Android smartphone or other device
• Voice guidance function provides helpful notifications, including power and pairing status, and remaining battery level
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
• Type: Closed‐back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 - 32,000 Hz
• Sensitivity: 105 dB/mW
• Impedance: 32 ohms
• Battery: DC 3.7 V lithium polymer battery
• Battery Life: Approx. 60 hours continuous use (music playback)
• Weight: Approx. 180 g (6.3 oz)
• Charging Time: Approx. 4 hours
• Cable: Detachable 1.2 m iS controller cable with mic
• Connector: 3.5 mm (1/8″) stereo mini
• Microphone Type: Electret condenser
• Microphone Sensitivity: ‐42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 - 4,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Accessories Included: USB charging cable (30 cm (12”), USB Type‐A / USB Type‐C) cable with in‐line mic and control (1.2 m (3.9’) /3.5 mm (1/8”) gold‐plated stereo mini‐plug (4 pole/L‐shaped))
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight ‐ approx. 10 m (33')

Go to Item

ATH-S220BT

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Nicht vor 31.08.2021 online stellen!!

Go to Item

ATH-PRO5X

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-PRO5X DJ Headphones - Over-ear style delivers exceptional isolation and long-wearing comfort, Maximum input power of 1,500mW enables operation at higher volume levels and Newly developed 40mm drivers reproduce extended frequency response.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 35,000 Hz
• Maximum Input Power: 1,500 mW
• Sensitivity: 100 dB/mW
• Impedance: 34 ohms
• Weight: 250 g (without cable and connector)
• Cable: -Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable
• Cable: -Detachable 1.2 m (3.9') straight cable
• Accessories Included: 6.3 mm (1/4") screw-on adapter

Go to Item

ATH-PRO5X

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

ATH-M70X

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The ATH-M70x professional studio monitor headphones feature proprietary 45 mm large-aperture drivers and are tuned to accurately reproduce extreme low and high frequencies (5 to 40,000 Hz) while maintaining perfect balance. They are ideal for studio mixing and tracking, FOH, DJing, mastering, post-production, audio forensics and personal listening. Crafted for lasting durability, the studio headphones provide excellent sound isolation and are equipped with 90° swiveling earcups for easy, one-ear monitoring.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Made for the Most Critical Listening Tasks - Pure Professional Performance
This is the flagship model of the M-Series. It incorporates everything we’ve learned about designing and manufacturing professional monitor headphones.

Long Lasting Durability - Studio Headphones, Built to Last
You won’t have to worry about these headphones – they’re ruggedly constructed with key metal components to ensure lasting performance.

Professional Performance - Tuned for Mixing and Mastering
Made for the most critical listening tasks, the M70x headphones are perfectly balanced to reproduce extreme low and high frequencies (5 to 40,000 Hz).

Features:
• M-Series flagship model, tuned for extremely accurate reproduction and carefully crafted using key metal components for lasting durability
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Extended response accurately reproduces extreme low and high frequencies while maintaining perfect balance
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpads and headband provide excellent durability and comfort, and detach for easy replacement
• Perfect for studio mixing and tracking, mastering and audio forensics
• Fold-flat design for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45mm
• Frequency Response: 5 - 40,000 Hz
• Maximum Input Power: 2,000 mW @ 1KHz
• Sensitivity: 97 dB
• Impedance: 35 ohms
• Weight: 280g without cable/connector
• Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M60X

179,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PURE. PROFESSIONAL. PERFORMANCE.

ATH-M60x Headphones
On-Ear Professional Monitor Headphones with exceptional clarity throughout an extended frequency range. audio technica monitor headphones on ear for studio and professional use.

Designed for studio, broadcast and mobile applications, the ATH-M60x on-ear professional monitor headphones utilize the same proprietary 45 mm large-aperture drivers found in the legendary ATH-M50x headphones, delivering exceptional clarity throughout an extended frequency range with accurate bass response. The low-profile, closed-back, on-ear design provides excellent sound isolation and a great fit, which is enhanced by the exceptional comfort and durability of the memory foam earpads and headband. The headphones come with three interchangeable cables (1.2 m - 3.0 m coiled, 3.0 m straight, and 1.2 m straight – each with a 3.5 mm (1/8") mini-plug), a 6.3 mm (1/4") screw-on adapter, and a protective carrying pouch.

Built on the Acclaimed M50x Sound
These headphones use the same drivers as the ATH-M50x to deliver exceptional clarity throughout an extended frequency range with deep, accurate bass response.

NAMM TEC Award Winner - Award-Winning On-Ear Headphones
Praised for their technical excellence, the M60x on-ear headphones offer a low-profile option for fans of the Audio-Technica M-Series.

Professional Headphones, Built to Last
You won’t have to worry about durability – these headphones are built to last with key metal components ensuring long-term performance.

Features:
• Low-profile, closed-back, on-ear design provides excellent isolation and fit.
• Proprietary 45 mm large-aperture drivers (the same used in the legendary ATH-M50x) with rare earth magnets and copper-clad aluminum wire voice coils
• Carefully crafted using key metal components for lasting durability
• Exceptional clarity throughout an extended frequency range with accurate bass response
• Low-impedance design delivers high output level from any headphone output
• Premium, memory foam earpads and headband allow headphones to be worn comfortably for hours on end
• Earpads and headband detach for easy replacement
• Ideal for studio, broadcast and mobile applications
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)

Go to Item

ATH-M50xBT2

179,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The ATH-M50xBT2 is the second generation of our critically acclaimed M-Series wireless over-ear headphones. These headphones feature 45 mm large aperture drivers in a wireless design, so listeners will enjoy the same sonic signature of the legendary ATH-M50x studio headphones. With this update, we’ve also introduced several noticeable enhancements, such as improved vocal pickup for better call quality, an updated USB-C connection, and multipoint pairing mode.

So, whether you’re looking for high-fidelity audio for your commute to work, conference call setup, or just relaxing and enjoying the music, the ATH-M50xBT2 lets you go wireless whenever you need it.

Building on the acclaimed sonic signature of the ATH-M50x headphones, the ATH-M50xBT2 headphones utilise Bluetooth wireless technology and offer the same studio-quality sound in a wireless package. The large-aperture drivers deliver deep and accurate bass response for an immersive listening experience, while the AK4331 advanced audio DAC and dedicated internal headphone amp provide superior clear, high-fidelity sound.

The ATH-M50xBT2 features dual microphones and beamforming technology, which provide improved vocal pickup ensuring crystal-clear audio call quality. Additionally, users can conveniently mute with the press of a button or access the built-in Amazon Alexa voice assistant, as well as Google Assistant and Siri.

These headphones have a battery life of up to 50 hours on a continuous full charge, with up to 3 hours of use on a 10-minute rapid charge via the USB-C connection, making them some of the longest-lasting wireless headphones available.

The multipoint pairing function allows users to stay connected to two Bluetooth devices at once, making it easier than ever to switch between tasks. You can also personalise and adjust the ATH-M50xBT2 to your preferences with the A-T Connect app. Adjust additional controls like activating low latency mode, adjust and save EQ to your headphones, change the L/R volume balance, select desired voice assistant, and more.

Included Accessories: The ATH-M50xBT2 comes with a 1.2 m (3.9") cable for an optional wired connection.

Headphones
Type Closed-back dynamic
Driver Diameter 45 mm
Frequency Response 15 - 28,000 Hz
Sensitivity 99 dB/mW
Impedance 38 ohms
Battery DC 3.7V lithium polymer battery
Battery Life Approx. 50 hours continuous use
Weight Approx. 307g
Charging Time Approx. 3.5 hours
Microphone Type MEMS type
Microphone Sensitivity -38 dB (1V/Pa at 1 kHz)
Microphone Frequency Response 85 -15,000 Hz
Microphone Polar Pattern Omnidirectional
Accessories Included USB charging cable（30cm､USB Type-A / USB Type-C), Audio cable (1.2m/ φ3.5mm stereo mini-plug), Pouch
Bluetooth®
Bluetooth® Version Bluetooth Ver.5.0
Operating Range Line of sight – approx. 10 m (33′)
Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
Support Codec LDAC / AAC, SBC

Go to Item

ATH-M50X

164,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Studio Industry Icon
Engineered to deliver a superior sound experience at an affordable price, the M50x have been widely acclaimed online by professionals, casual listeners and streamers. From everyday listening and commuting to gaming or studio recording, you’re in great hands with the M50x, with build quality and coveted sound engineering that’s praised by audio experts and professionals year after year.

Gaming Excellence
Consistently celebrated by critics and designed utilising over half a century of Japanese audio design and technology, you’ll hear every blast, boss and battle in stunning clarity and immersive sound through the ATH-M50x. Their wide and clear sound range allows you to discern between every layer of your game’s audio design whilst enjoying crisp musical highs and low, bassy explosions. And because the ATH-M50x is powered through the audio jack alone, you can play uninterrupted, indefinitely.
If you’re looking for streaming, online and co-op communication, the optional ATGM2 Detachable Gaming Boom Microphone is the perfect accompaniment to online gameplay with exceptional pickup and clarity that can be easily detached or flicked up when not needed.

Professional Home Studio Headphones
With 55 years of Japanese audio design, Audio-Technica is loved by many of the world’s biggest artists, vocalists and musicians and the M50x headphones remain one of our most popular innovations to date. Whether you’re a music industry veteran or you’re looking to start recording at home, the ATH-M50x are an excellent choice of headphones for listening back to or monitoring your audio performance.
Either from your computer/audio receiver or plugged directly into your microphone for monitoring (as with our AT2020 or AT2020USB+ microphones), the ATH-M50x headphones deliver stunning sound design.

The Extraordinary Everyday
Rated highly for their professional-grade comfort, foldable versatility, strong construction and excellent sound design, the ATH-M50x are an exquisite choice as your audio daily drivers. Whether it’s travel, your daily commute or working and studying at home, you’ll love their all-day comfort and immersive sound design. Offering passive noise isolation through circumaural design contours, our M50x headphones provide a high-quality audio experience, helping you to boost your concentration and productivity at work and allowing you to meditatively switch off on your commute.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Collapsible for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)
• Top choice for studio tracking and mixing, as well as DJ monitoring and personal listening

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45mm
• Frequency Response: 15 - 28,000 Hz
• Maximum Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Weight: 285g without cable/connector
• Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M50x

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Detachable cable (3 cables included)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Frequency Response: 15 - 28,000 Hz
• Max Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Folding/collapsible: Yes
• Weight: 10 oz (284 g) without cable/connector
• Cable - Detachable: Yes
• Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Accessories included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M40x Headphones

114,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

Cutting-edge engineering and robust construction
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned flat for incredibly accurate sound monitoring across the entire frequency range
Circumaural design contours around the ears for excellent sound isolation in loud environments
90° swiveling earcups for easy, one-ear monitoring
Professional-grade earpad and headband material delivers more durability and comfort
Detachable cable (2 cables included)

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 24,000 Hz
Max Input Power: 1,600 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: (Without cable) 8.5 oz (240 g)
Cable - Detachable: Yes
Cable Includes: 1.2m-3m coiled, 3m straight cablesConnector Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M30x Headphones

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced detail, with excellent mid-range definition
Circumaural design contours around the ears for excellent sound isolation in loud environments

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 22,000 Hz
Max Input Power: 1,300 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 47 ohms
Folding/collapsible: Yes
Weight: (Without cable) 7.8 oz (220 g)
Cable - Detachable: No
Cable: 3 m (9.84’) Straight cable, left-side exit
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M20xBT

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Over-Ear Headphones

The ATH-M20xBT over-ear wireless headphones include all the features you want and the audio quality you demand. Inspired by our #1 selling ATH-M20x wired professional studio headphones and featuring powerful 40 mm drivers for enhanced low-frequency performance, the ATH-M20xBT Bluetooth headphones deliver an incredible listening experience with full-range, high-fidelity audio and enhanced bass.

Enjoy a sonic signature tuned to reflect our wired studio monitor headphones wherever you go. The ATH-M20xBT has a multipoint pairing capability that lets you connect wirelessly to two devices, optimal for multimedia use. The wireless headphones are also equipped with a low latency mode that improves the synchronicity between audio and video for smooth streaming and gaming.

Audio-Technica over-ear headphones provide excellent sound isolation in loud environments. Combining modern design and high-quality materials, the ATH-M20xBT delivers an ideal listening experience for those that put audio first.

The ATH-M20xBT headphones have a long battery life, providing up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection). The microphone and buttons built into the left earcup let you easily control calls, music playback, and volume. Constructed with professional-grade ear pad and headband material, the ATH-M20xBT was built for long-lasting durability and comfort.

Included Accessories: The ATH-M20xBT comes with a 1.2 m (3.9') cable for an optional wired connection.

The Features You Expect - The Studio Sound You Demand
Enjoy all the convenience, comfort and sound of a wireless design. The classic, high-fidelity M20x studio sound with enhanced bass is now yours to take with you wherever you go.

To Keep You Going - 60-Hr Battery Life
With the ATH-M20xBT headphones your music is always there for you. A full charge gives you up to 60 hours of playback, a 10-minute rapid charge provides up to 3 hours.

Best of Both Worlds - Wired or Wireless
The ATH-M20xBT comes with a detachable audio cable so you can use the headphones with a standard wired connection whenever you want or need to.

Features:
• Wireless, on-the-go design delivers the same sonic signature as the wired ATH-M20x professional studio headphones
• 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection)
• Microphone and buttons built into the left earcup let you easily control calls, music playback, and volume
• Over-ear design for excellent sound isolation in loud environments
• Professional-grade earpad and headband material for long-lasting durability and comfort
• Includes 1.2 m (3.9') cable for optional wired connection

Specifications Headphones:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 32,000 Hz
• Sensitivity: 100 dB/mW
• Impedance: 36 ohms
• Weight: Approx. 216 g (7.6 oz)
• Charging Time: Approx. 4 hours*
• Operating Temperature: 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time: Continuous transmission time (music playback): Max. approx. 60 hours*
• Microphone Sensitivity: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 to 20,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Power Supply: DC 3.7 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12”), USB Type-A / USB Type-C). Audio cable (1.2 m (3.9’) /3.5 mm (1/8”) gold-plated stereo mini-plug (3 pole/L-shaped))
(Notes: For product improvement, the product is subject to modification without notice.)

Specifications Bluetooth®:
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight - approx. 10 m (33')
• Maximum RF Output: 10 mW EIRP
• Frequency Band: 2.402 GHz to 2.480 GHz
• Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method: FHSS
• Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
• Support Codec: AAC, SBC
• Supported Content Protection Method: SCMS-T
• Transmission Band: 20 to 20,000 Hz

* The above figures depend on operating conditions.

Go to Item

ATH-M20x

54,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessory Included: 6.3 mm (1/4") snap-on adapter

Go to Item

ATH-CKS50TW

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-CKS50TW
ATH-CKS50TW truly wireless headphones combine advanced acoustic technology for stunning bass with a comfortable and secure fit, while a high-capacity battery provides up to 20 hours of powerful, continuous audio (up to 50 hours with the charging case). All you have to do is let the music take control.

The newly developed large-diameter drivers (9mm Solid Bass HD TWS drivers) deliver deep bass while the CKS50TW shape provides a snug fit - an important factor for truly wireless headphones as the airtight fit prevents the bass from escaping to deliver a unique and intimate music experience.

Make your voice heard with Qualcomm® cVc™ Generation 8.0
Enjoy improved microphone performance in calls, whether in the office, working from home or in an online class. The sidetone function of the CKS50TW also allows you to hear your own voice during calls for more natural-sounding conversations, feeling almost as if you weren’t wearing headphones at all.

Built-in button design for on-the-go operation
Audio-Technica’s ATH-CKS50TW wireless earbuds are designed for reliable, stress-free operation for a more enjoyable truly wireless listening experience. The left button adjusts the volume and switches between hear-through and noise-cancelling functions, while the right button lets you easily start/stop playback, skip between songs, or enable quick hear-through.

Rain and splash-proof design
The CKS50TW wireless earbuds boast an IPX4*-equivalent JIS protection rating. The splash-proof design means you never have to worry about keeping your truly wireless earbuds dry in sudden rain showers or when exercising.

*An IPX4-equivalent rating signifies the product will not be adversely affected by water splashing from any direction. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof.

Greater customization
Personalize the operation of your Audio-Technica earbuds via Audio-Technica’s Connect app, available from both Apple and Google Play. Take full control of your sound, switching between codecs, experimenting with equalizer pre-sets or adjusting your volume levels. You can even use the app to help locate your earbuds, so you’ll always have a stunning soundscape to accompany your day to day.

Interruption-free listening

Packed full of useful functions, the CKS50TW earbuds are compact, with a unique antenna structure designed to ensure stable connectivity while fitting in limited space. This helps prevent sound from being interrupted even in train stations or other crowded locations.

The ATH-CKS50TW earbuds also feature Qualcomm® TrueWireless Mirroring.

Independent transmission to the left and right sides reduces sound interruptions and delays for videos on all devices, including Android and iOS smartphones.

Automatic power-on and fast pair convenience

Once paired with your device, Audio-Technica’s CKS50TW wireless headphones automatically turn on and connect to your Android or Google device** when they are removed from the case for quick usability. When the truly wireless earbuds are put back in the case, they power down and begin charging. The power can also be turned on/off directly from the headphones.

** Only one Android device can be paired by using Fast Pair. Google and Android are trademarks of Google LLC.

Check up on your charge with LED indicators

The CKS50TW’s four LED indicators light up or flash whenever the charging case is opened or closed, so the user can see the charging status or remaining charging case battery power at a glance.

Sony’s 360 Reality Audio certified

The combination of 360 Reality Audio and Audio-Technica’s long-cultivated acoustic technology allows listeners to fully experience the world of sound envisioned by the creators.

Features
Bluetooth® 5.2
50 hour battery (20 hours in the earbuds + 30 hours in the charging case)
Fast charging support - 10 minutes = 90 minutes of power (approx)
Multi-point pairing function for registering multiple devices
9mm Solid Bass HD TWS drivers
Noise-cancelling mode
Hear-through function
Built-in mic and controls
IPX4
Qualcomm® cVc™ Generation 8.0
Qualcomm® TrueWireless Mirroring
SCMS-T protected content and 1seg broadcasting support
Voice guidance function*1
Compatible with Sony’s 360 Reality Audio*2
*1 Voice guidance can be used for notifications, including power and pairing statuses as well as remaining battery level (High, Medium, or Low).
*2 Requires use of subscription to compatible online music service – subscription fees may apply. Compatible services may not be available in certain countries/regions. Please visit https://www.sony.net/360RA to check compatibility of the service. "SONY'' is a registered trademark of Sony Group Corporation.

Specifications
Headphones
Type Dynamic
Driver Diameter 9 mm
Frequency Response 5 to 20,000 Hz
Sensitivity 110 dB/mW
Impedance 20 ohms
Weight Headphones: Approx. 8 g (0.28 oz) (L side), approx. 8 g (0.28 oz) (R side); Charging case: Approx. 60 g (2.1 oz)
Charging Time Headphones: Approx. 3 hours
Charging case: Approx. 3 hours
The figures above depend on operating conditions.
Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
Operating Time Continuous transmission time (music playback): Max. approx. 20 hours (headphones), Max. approx. 50 hours (if charging case is used in combination)
The figures above depend on operating conditions.
Microphone Type MEMS type
Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
Microphone Frequency Response 100 to 8,000 Hz
Microphone Polar Pattern Omnidirectional
Power Supply Headphones: DC 3.7 V lithium ion battery
Charging case: DC 3.7 V lithium ion battery
Water-Resistant (drip-proof) Performance IPX4
Headphones only
Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips (XS, S, M, L)
Notes For product improvement, the product is subject to modification without notice.
Bluetooth®
Bluetooth® Version Bluetooth version 5.2
Operating Range Line of sight - approx. 10 m (33')
Maximum RF Output 10 mW EIRP
Frequency Band 2.402 GHz to 2.480 GHz
Modulation Method GFSK, Pi/4DQPSK, 8DPSK
Spread Spectrum Method FHSS
Compatible Bluetooth Profiles A2DP, AVRCP, HFP
Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
Supported Content Protection Method SCMS-T
Supported Sample Rates 44.1 kHz, 48 kHz
Supported Bit Rates 16 bit, 24 bit
When using Qualcomm® aptX™ Adaptive audio.
Transmission Band 20 to 20,000 Hz

Go to Item

ATH-CKS30TW+

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-CKS30TW+ Wireless Headphones
Enhance the everyday with the ATH-CKS30TW+: the true wireless earbuds that stimulate the senses with chest-thumping bass and immersive active noise-cancellation.

Coming in four unique colours to suit your personal style, these pocket-sized truly wireless headphones offer high resolution sound for realistic music and movies. For beats that make your whole body move, activate the ultra-low-frequency equalizer to enjoy the richest depths of your music.

Combining super deep bass with noise-cancelling smarts, these in-ear headphones allow you to fully engage with your sound, wherever you are. Need to tune into your surroundings? You can safely let the outside in with hear-through and talk-through functions.

Enjoy up to 6.5 hours of use from each earbud when fully charged—even with noise-cancelling turned on—or 17.5 hours of use with both the headphones and charging case fully charged. Turn noise-cancelling off to get up to 7.5 hours of use from each earbud or 20 hours of use with the charging case.

Taking you from morning workouts to evening relaxation, these securely-fitting waterproof earbuds feature a snug fit to keep the bass intact and feel comfortable all day – and should they ever be misplaced, our handy Out of Range Alert keeps you in the loop.

Sound That Goes Deeper - Heavy Bass Beats
Dive even deeper into music with the ultra-low-frequency equalizer, Bass Boost – Deep, for a bass response that must be heard to be believed. Or, customise your sound in the A-T Connect App with four additional equalizer presets that enhance everything from vocal clarity to dynamic gaming experiences.

Acoustic ducts and proprietary 9mm drivers control airflow to ensure a rich and detailed performance that brings the excitement of a live show to everyday life.

Waterproof Design - Ready For Anything
The perfect companions to take you from the gym to the beach, the earbuds are highly waterproof and dustproof with an IP55 (1) rating – so there’s no need to worry about life’s splashes and spills.

High intensity workout? Don’t sweat it. The earphones can be safely rinsed off with water when your routine is finished.

(1) The IP5X rating provides protection against dust that can interfere with functions. The IPX5 rating provides protection against water jets. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof. The main body of the headphones is waterproof and dustproof equivalent to IP55, except for the openings where sound comes out.

Lose Yourself In Music - Active Noise Cancellation
Sit back and tune in: these active noise-cancelling earbuds let you fully engage with your favourite music or movies. Accessible with a single tap of the built-in touch sensors, you can also use the hear-through function to engage with your surroundings when listening to music on the go.

For when you need to hear travel announcements or have quick in-person conversations, the talk-though function lets you listen to those around you.

Unmatched Comfort And Fit - A Snug Design That Keeps The Bass Intact
Fitting snugly in the ear for a natural, strong hold, the wireless earbuds stay firmly in place during exercise, prevent bass from escaping, and supress unwanted outside noise with superior sound insulation.

Out of range alert - Easy location
Never lose your earbuds again. The Out of Range Alert notifies you when the Bluetooth signal is weak, so you’ll always know if you’re getting too far away from the headphones before the connection is lost.

Misplaced your buds? Open the Connect app to see the last location where the headphones were disconnected on a handy map.

Relax & Focus - Customisable Listening Experience
Whether you’re focussing on work or making time to unwind, the A-T Connect App’s soundscape function has your back.

Listen to the relaxing sounds of nature carefully recorded using Audio-Technica microphones, use masking noise to enhance concentration, or tune into healing sounds for mental rejuvenation.

Features:
• Available in four colors: standard matte black, discreet light beige, lively evergreen, or the unique translucent skeleton (translucent black)
• Up to 6.5 hours of use from each headphone when fully charged—even with noise-cancelling turned on—or 17.5 hours of use with both the headphones and charging case fully charged
• Turn noise-cancelling off to get up to 7.5 hours of use from each headphone or 20 hours of use with the charging case
• LED indicator lamp on the charging case for quickly checking remaining battery power
• Out of Range Alert and Product Locator for finding the earbuds’ last location
• Soundscape function via the A-T Connect App for improved focus or relaxation
• Customisable touch sensor control to play or pause music, skip between tracks, answer calls, and adjust the volume
• Adjustable touch sensor sensitivity to improve operation and adjustable volume steps to get the perfect listening comfort for your ears
• Clear and satisfying calls wherever you are, with selectable sidetone circuitry to improve conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Multipoint pairing function to stay connected to two Bluetooth devices at once and re-pair easily through the A-T Connect App
• Low latency mode to watch videos or play games with minimal sound delay (2)
• Fast Pair support for convenient connection with Android devices (3,4)
• Siri and Google Assistant support at the touch of a button for voice control (5,6)
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case (7)
• Selectable sidetone circuitry to improve conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Voice guidance in English and Japanese
2 - Low Latency Mode can also be turned on/off from the A-T Connect App. Bluetooth connections may be affected by obstacles and ambient radio wave conditions.
3 - Only one Android device can be paired using Fast Pair.
4 - Google and Android are trademarks of Google LLC.
5 - Siri® is a registered trademark of Apple Inc.
6 - Google and Android are trademarks of Google LLC.
7 - Pairing is required on first use.

Specifications:
Headphones
• Type Dynamic
• Driver 9.0 mm
• Sensitivity 110 dB/mW
• Frequency response 5 to 20,000 Hz
• Impedance 20 ohms

Microphone
• Type MEMS type
• Polar pattern Omnidirectional
• Sensitivity -38 dB (1 V/Pa, at 1 kHz)
• Frequency response 100 to 8,000 Hz

Communication specifications
• Communication system Bluetooth version 5.1
• Maximum RF output 10 mW EIRP
• Maximum communication range Line of sight -approx. 10 m
• Frequency band 2.402 GHz to 2.480 GHz
• Modulation method GFSK, Pi/4DQPSK, 8DPSK
• Spread spectrum method FHSS
• Compatible Bluetooth profiles A2DP, AVRCP, HFP
• Supported codec AAC, SBC
• Supported content protection method SCMS-T Transmission band 20 ～20,000Hz

Other
• Power supply: Headphones: DC 3.7V lithium ion battery / Charging case: DC 3.7V lithium ion battery
• Charging time: Headphones: Approx. 2.5hours*1 / Charging case: Approx. 3.0 hours

Operating time
Continuous transmission time (music playback, ANC on):
• Max. approx. 6.5 hours*1 (headphones)
• Max. approx. 17.5 hours*1 (if charging case is used in combination)
Continuous transmission time (music playback, ANC off):
• Max. approx. 7.5 hours*1 (headphones)
• Max. approx. 20.0 hours*1 (if charging case is used in combination)

• Weight: Headphones: Approx. 4.5 g (L side), approx. 4.5g (R side), Charging case: Approx. 28.0g
• Water-resistant (drip-proof) performance IP55 *2
• Operating temperature 5 °C to 40 °C

Accessories
• USB charging cable (30 cm , USB Type-A / USB Type-C),
• Eartips: Standard (XS, S, M, L), Soft (XS, S, M, L)

Go to Item

ATH-AVC500

79,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Closed-back dynamic headphones
High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.

Features:
• Large 53 mm CCAW bobbin-wound voice coil drivers reproduce full, wide-range sound
• Anti-vibration aluminium housings ensure rich sound reproduction
• Self-adjusting headband support mechanism automatically delivers the best possible fit
• Bass-ports create tight, deep bass sound
• Soft foam earpads provide extra comfort while listening

Specifications:
• Driver Diameter: Closed-back dynamic 53mm
• Frequency Response: 10 - 25,000 Hz
• Maximum Input Power: 1,800mW
• Sensitivity: 106 dB/mW
• Impedance: 40 ohms
• Weight: 270g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Go to Item

ATH-AVC200

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Closed-back dynamic headphones
Entry-level closed-back headphones with comfortable fit for use with home audio and video systems. Offers high-quality sound for enhanced enjoyment of movies and music.

Features:
• Newly designed 40 mm drivers reproduce clear mid-low frequencies
• Adjustable headband support provides comfortable fit even during extended wear
• Large headband delivers comfortable and stable fit
• Contoured earpads fit naturally over ears to help to provide rich bass

Specifications:
• Driver Diameter: Closed-back dynamic 40mm
• Frequency Response: 20 - 22,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 100 dB/mW
• Impedance: 40 ohms
• Weight: 210g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Go to Item

ATH-AVA400

79,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Open-back headphones with self-adjusting headband support mechanism - suitable for hours of use with home audio and video systems. Offers full, high-quality sound.

Features:
• Open-air design, featuring 40mm CCAW drivers, delivers rich, detailed sound
• Honeycomb-punched aluminium housings enable clear sound reproduction
• Self-adjusting headband support provides comfortable fit even during extended wear
• Soft, cloth earpads reduce pressure on your ears

Specifications:
• Driver Diameter: Open-back dynamic 40mm
• Frequency Response: 18 - 25,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 93 dB/mW
• Impedance: 35 ohms
• Weight: 240g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Go to Item

ATH-AD500X

159,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High-Fidelity Open-Back Headphones
The newly designed ATH-AD500X are open-air headphones that produce a completely natural sensation without losing any of the natural sound and deep impactful bass.

a natural, precise and profound listening experience
The ATH-AD500X Open-back headphones offer a natural, precise and profound listening experience. The earcups and the 3D wing structure of the headband make listening all the more comfortable and immersive allowing for long lasting listening comfort, further enhanced by extra padding on the earpads.

ccaw voice coils
The large-aperture 53mm drivers of the ATH-AD500X are built around the CCAW voice coils developed by Audio-Technica, which create stunning audio and deep and balanced bass reproduction.

extreme comfort
The earphones are covered with large earcups that fully cover the ears. The earcup pads are dressed in a durable and very soft fabric that provides exceptional listening comfort allowing for prolonged use.

3D wing headband structure
The 3D Wing System comprises the the small removable wings that are found across the range of our HiFi headphones. No adjustment is necessary, the headset adapts itself to any head shape as soon as it is positioned on the head, and removes any feeling of pressure felt with a classic shaped headband. You will forget that the headphones even weigh 235g!

immersive listening
The open-back headphones keep any pressure away from the ears, to allow for a natural listening sensation.

HONEYCOMBED HOUSING
The large honeycombed aluminum housing provides a sense of clarity and exceptional ventilation.

OFC CABLE
The ATH-AD500X has a connection cable made from OFC (oxygen-free copper) treated for improved conduction which avoids any sound alteration.

3D WING STRUCTURE
The 3D Wing Structure system allows ATH-AD500X to adapt to different head shapes for optimum user comfort, making the headphones feel weightless, even during prolonged use.

Features:
• 53mm drivers and CCAW voice coils reproduce remarkable natural sound
• Deep, impactful bass and outstanding vocal projection
• Open-air headphones that provide no sense of pressure on the ears, resulting in a completely natural sensation
• Lightweight honeycomb aluminum casing
• Self-adjusting 3D Wing Support Housing provides comfortable support for a more enjoyable listening experience
• Flexible raised-fabric earpads offer excellent wearing comfort and durability
• Highly conductive OFC (oxygen-free copper) single sided cable with elastic TPE sheath to prevent tangles
• Gold-plated stereo 1/8” (3.5mm) connector with 1/4” (6.3mm) adapter

Specifications:
• Type: Open-air dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 - 25,000 Hz
• Maximum Input Power: 500 mW
• Sensitivity: 100dB/mW
• Impedance: 48 ohms
• Weight: 235g
• Cable: 3.0m
• Connector: 3.5 mm(1/8”) mini stereo, gold-plated
• Accessories Included: Detachable 1/4” (6.3 mm) adapter

Go to Item

ATH-A990Z

259,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High-Fidelity Closed-Back Headphones
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A990Z high-fidelity headphones deliver a premium high-fidelity sound performance.

High-Fidelity Art Monitor Series
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A990Z high-fidelity headphones deliver a premium high-fidelity sound performance. Featuring newly designed 53mm drivers, hand-assembled in Japan, that deliver clear, natural high-resolution audio reproduction, and lightweight aluminium housings with a deep metallic forest green finish.

Japanese Precision
Each newly designed 53mm driver is hand-assembled with Japanese precision for increased reliability and performance.

Comfortable Fit
Premium, soft earpads provide a comfortable fit for long listening periods.

Extended Bass Frequency Range
Double Air Damping Structure (D.A.D.S.) optimises the internal airflow to provide an extended bass frequency range for deep bass reproduction.

Enhanced 3d Wing Support
Redesigned, self-adjusting 3D Wing Support Housing that perfectly adapts to the user’s head for a closer, more stable fit providing extra comfort for long listening periods.

Premium Earpads
Offering a comfortable fit for long listening periods, the A990Z headphones include premium, soft earpads.

Superior Design
Lightweight aluminium housings with a deep metallic forest green finish.

Tangle-Free Cable
Includes a 3.0m cloth-wrapped tangle-free cable.

Features:
• Hand-assembled in Japan, the A990Z features newly designed 53mm drivers for a premium high-fidelity sound
• Lightweight, aluminium housings with a deep metallic forest green finish
• Innovative 3D wing support for a great fit and long-wearing comfort
• Premium, soft earpads for comfortable fit
• Double Air Damping System structure provides an extended frequency range for deep bass reproduction
• 3.0 m cloth-wrapped tangle-free cable

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 – 42,000Hz
• Maximum Input Power: 2,000mW
• Sensitivity: 100dB/mW
• Impedance: 44 ohms
• Weight: 335g (without cable)
• Cable: 3.0 m
• Connector: 6.3/3.5 mm gold-plated stereo 2-way plug

Go to Item

ATH-A550Z

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High-Fidelity Closed-Back Headphones
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A550Z high-fidelity headphones deliver a premium high-fidelity sound performance.

High-Fidelity Art Monitor Series
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A550Z high-fidelity headphones deliver a premium high-fidelity sound performance. Featuring newly designed large 53mm drivers and distinctive matte black design.

Audiophile-Quality
Newly designed 53mm drivers for audiophile-quality acoustic performance.

Comfortable Fit
Premium, soft earpads provide a comfortable fit for long listening periods.

Extended Bass Frequency Range
Double Air Damping Structure (D.A.D.S.) optimises the internal airflow to provide an extended bass frequency range for deep bass reproduction.

Enhanced 3d Wing Support
Redesigned, self-adjusting 3D Wing Support Housing that perfectly adapts to the user’s head for a closer, more stable fit providing extra comfort for long listening periods.

Premium Earpads
Offering a comfortable fit for long listening periods, the A550Z headphones include premium, soft earpads.

Back To Black
The A550Z comes in a distinctive matte black finish.

Tangle-Free Cable
Includes a 3.0m tangle-free cable.

Features:
• New 53mm large drivers for high-fidelity audio performance that offers both power and detail
• Innovative 3D wing support for a great fit and long-wearing comfort
• Distinctive matte black finish
• Premium, soft earpads for comfortable fit
• Double Air Damping System structure provides an extended frequency range for deep bass reproduction
• 3.0 m tangle-free cable

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 – 35,000Hz
• Maximum Input Power: 1,000mW
• Sensitivity: 100dB/mW
• Impedance: 40 ohms
• Weight: 300g (without cable)
• Cable: 3.0 m
• Connector: 6.3/3.5 mm gold-plated stereo 2-way plug

Go to Item

AT634a Plattenreinigungsmittel

11,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record care solution

One bottle supplied with AT6012 record care kit
Two ounces - 56ml

Go to Item

AT618a Vinyl Stabilizer

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

Go to Item

AT6180a Stroboskopscheibe

21,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A universal stroboscopic disc used to show the running speed of the turntable at 33 and 45 RPM with a spindle radius guide.

Go to Item

AT617A

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT617A - CARTRIDGE STYLUS CLEANER
- Specially formulated polyurethane gel removes dirt particles from stylus
- Gel remains tacky for years
- Surface is washable for repeated use

Go to Item

AT615a Plattenspieler-Wasserwaage

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Machined aluminium housing turntable leveler that provides a precise level for horizontal adjustment of the turntable.

Go to Item

AT6006R Tonearm Safety Raiser

108,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-06

Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.

Specifications
Dimensions: 14 mm (0.55") diameter × 27 mm (1.06") to 39 mm (1.54") height*
Lift bar movable width: 3 mm (0.12")
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55") diameter × 12 mm (0.47") height; 14 mm (0.55") diameter × 24 mm (0.94") height)

* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.

Go to Item

AT6003R

24,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT6003R Cartridge Case - 3 sets of cartridges with headshells can be stored,
Compatible with double pin lock headshells and Rubber feet for enhanced stability.

Display and protect your cartridges within the distinctive design of this cartridge case, which allows for the secure storage of up to three cartrdiges together with their respective headshells.

No Cartridges included!

Go to Item

AT-XP7

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-06

AT-XP7
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• VM dual magnet cartridge with elliptical bonded stylus

The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable robust design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• Great visibility of stylus tip for instant positioning in dark environments
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Tapered aluminium cantilever
• Stainless wire suspension enables expressive higher frequency for clearer sound
• High-rigidity and Low-resonance cartridge housing
• Replacement Stylus: ATN-XP7

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 20,000 Hz
• Channel Separation: 22 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Stylus Construction: Bonded Round Shank
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 6.0 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: Output Channel Balance
• Stylus Shape: Elliptical
• Cantilever: Aluminium tapered Pipe
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 8.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP7
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

User Manual: https://eu.audio-technica.com/resources/AT-XP7_UM_112301360_V1_11L_web_171018.pdf

Go to Item

AT-XP5

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

Go to Item

AT-XP3

59,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf

Go to Item

AT-VMN95SH

179,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

AT-VMN95ML

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-06

Go to Item

AT-VMN95EN

109,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

AT-VMN95E

32,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-VMN95E
VM95 SERIES ELLIPTICAL REPLACEMENT STYLUS
Aluminium cantilever
Elliptical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Go to Item

AT-VMN95C

21,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

AT-VMN95C
VM95 SERIES CONICAL REPLACEMENT STYLUS
Aluminium cantilever
Conical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Go to Item

AT-VM95SH/H

229,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Der AT-VM95SH besitzt eine nackte
Shibata-Nadel – hochgeschätzt
insbesondere für audiophile HighendAnwendungen.
Der Shibata-Schliff ermöglicht satte,
volle Bässe und Mitten und einen
Frequenzgang bis 25.000 Hz.

AT-VM95SH
VM95 SERIES SHIBATA STEREO CARTRIDGE
The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

SHIBATA STYLUS
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95SH
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.7 x 0.26mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95SH
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Go to Item

AT-VM95SH

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Der AT-VM95SH besitzt eine nackte
Shibata-Nadel – hochgeschätzt
insbesondere für audiophile HighendAnwendungen.
Der Shibata-Schliff ermöglicht satte,
volle Bässe und Mitten und einen
Frequenzgang bis 25.000 Hz.

AT-VM95SH
VM95 SERIES SHIBATA STEREO CARTRIDGE
The AT-VM95SH, features a Nude Shibata stylus, one of the most acclaimed stylus format by high end audiophiles. The Shibata stylus produces mid and bass sounds strong and rich in addition to offer a frequency response up to 25,000 Hz.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

SHIBATA STYLUS
Provides a beautiful mid-high range Shibata-signature sound and strong mid-range volume.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95SH
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.7 x 0.26mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95SH
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Go to Item

AT-VM95ML/H

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Go to Item

AT-VM95ML

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Go to Item

AT-VM95EN/H

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-VM95EN vormontiert auf Headshell AT-HS6BK
• Das Tonabnehmer-Set AT-VM95EN/H wird im Audio-Technica Werk in Fukui (Japan) vormontiert, getestet und verpackt.
Gesamtgewicht 15,5 g

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Go to Item

AT-VM95EN

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Go to Item

AT-VM95E/H

85,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

AT-VM95E

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-06

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Go to Item

AT-VM95C/H

64,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-VM95C/H
VM95 SERIES CONICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japa

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95C/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95C

Go to Item

AT-VM95C

34,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Model AT-VM95C
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95C
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Go to Item

AT-PEQ30 Phono Equalizer

219,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-PEQ30 phono equalizer is designed specifically to upgrade a turntable with a built-in phono amplifier or to add a phono. It is compatible with turntables with VM (dual magnet), MM (moving magnet), and MC (moving coil) cartridges. The PEQ30 benefits from Audio-Technica’s years of analogue audio expertise and uses the finest quality parts in a layout that is optimized for low noise and minimum distortion.

Features:
• Selectable MM and MC input with fixed gain and impedance allows for compatibility with a wide range of moving magnet and moving coil cartridges
• High-quality FET inputs ensure a low noise signal when incorporated with a negative feedback-type phono equalizer circuit
• Precision components provide an excellent RIAA response for best-in-class performance
• The all metal construction enclosure provides superior isolation from radio and electronic noise interference
• The machined aluminium front panel and gold-plated input/output RCA connectors are examples of the high-grade material used throughout

Specifications:
• Input Impedance: MM type: 47 kiloohms, MC type: 120 ohms
• Input Sensitivity: MM type: 4.5 mV, MC type: 0.28 mV
• Rated Output: MM type: 250 mV, MC type: 250 mV
• Gain: MM type: 35 dB, MC type: 59 dB
• Signal-to-Noise Ratio: MM type: 100 dB, MC type: 74 dB
• RIAA Deviation: (20 to 20,000 Hz) MM type: ±0.5 dB
• Power Supply: DC 15 V, 1.2 A
• Power Consumption: 2.5 W
• Dimensions: 47 mm (1.85") H x 197.5 mm (7.78") W x 125.5 mm (4.94") D (excluding protrusions)
• Weight: About 890 g
• Accessories Included: AC adapter

Go to Item

AT-MG10 Headshell

49,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

AT-LT13A Headshell

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

AT-LPW50PB

339,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Fully Manual Belt-Drive Turntable
•Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Motor with speed-sensor system to maintain accurate platter rotation speed
•Adjustable dynamic anti-skate control
•High-isolation, height-adjustable feet
•Professional anti-resonance, die-cast aluminum platter with rubber mat
•AT-HS4 ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Adjustable dynamic anti-skate control
•AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
•Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
•High-isolation, height-adjustable feet
•AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Drive Method: Belt-Drive
Type: 2-speed, fully manual operation
Motor: DC servo with Active Speed Stabilization
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Signal-to-Noise Ratio: > 60 dB
Output Level: Pre-amp: "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements: 100 to 240 V, 50/60 Hz
Power Consumption: 220 V 50 Hz
Working: 1.3 W
Motor off: 1.1 W
Power off: 0.1 W
Dimensions: With dust cover 126.0 x 420.0 x 340.0 (H x W x D mm) Without dustcover and hinges:114.0 x 420.0 x 340.0 (H x W x D mm)
Weight: 4.81 kg (without dustcover)
Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus in black
• Detachable RCA output cable (dual RCA male to dual RCA male)
• Platter
• AC adapter
• 45 RPM adapter
• Counterweight
• Turntable mat
• Removable hinged dust cover

Manual: https://www.audio-technica.com/cms/resource_library/literature/e89c31b269914a97/at_lpw50pb_um_162502020_v1_en_web_191220.pdf

Go to Item

AT-LPW30TK

269,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LPW30TK
Manual Belt-Drive Wood Base Turntable

• Teak effect wood veneer finish
• Connect directly to speakers at home with the built-in phono preamplifier
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge

Video: https://www.youtube.com/watch?v=gmWsctJ8Kzk

Go to Item

AT-LP70XBT

249,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

Go to Item

AT-LP60XUSB

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP60XUSB
Fully Automatic Belt-Drive Turntable (Analog & USB)

• Experience high-fidelity audio of vinyl & convert records to digital files
• Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM
• Built-in switchable phono pre-amplifier for phono- or line-level output
• Improved tracking and reduced resonance for smoother sound
• Integral Dual Magnet™ phono cartridge with replaceable diamond stylus
• Free download of the Mac & PC compatible Audacity recording software

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2') USB cable

Cartridge & Stylus
• Replacement Stylus ATN3600L

Go to Item

AT-LP60XBT

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

Go to Item

AT-LP60XBT

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

AT-LP5X

379,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP5X
Fully Manual Direct Drive Turntable
Building on Audio-Technica’s analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.

The LP5x retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and ’70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.

Direct-drive, low noise motor
Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM
AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus
Lightweight AT-HS6 headshell
J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input
Anti-resonance, die-cast aluminum platter
Heavy rubber damping mat for improved low-frequency reproduction
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Elegant matte black finish
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable
Included dust cover and mounting hardware

Specifications

Drive Method Direct Drive
Type 3-speed, fully manual operation
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum
Starting Torque >1.0 kgf.cm
Braking System Electronic brake
Wow and Flutter <0.2% WRMS (33 RPM) at 3 KHz
Signal-to-Noise Ratio >50 dB
Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE 250 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized MC: 56dB nominal, RIAA equalized
USB Function A/D, - 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface - USB 2.0 compliant Windows 7 or above, MAC OS X or above
Power Supply Requirements 100-240V AC, 50/60 Hz
Power Consumption 3 W
Dimensions 450.0 mm (17.72") W x 352.0 mm (13.86")D x 157.0 mm (6.18")H
Weight 7.3 kg (16.1 lbs.)
Accessories Included AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus; AT-HS6 lightweight headshell; AC adapter ; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; dust cover with hinges.

Manual: https://eu.audio-technica.com/resources/AT-LP5X_UM_162501850_V1_EN_web_190927.pdf

Go to Item

AT-LP3XBT

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Go to Item

AT-LP3XBT

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Go to Item

AT-LP140XP

469,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

Go to Item

AT-LP140XP

449,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

AT-LP120XBT

359,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This fully manual turntable is modeled after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.

Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.

The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

High-fidelity audio with Bluetooth® wireless technology

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable

Compatible with the high-quality Qualcomm® aptX™ audio codec

Built-in switchable phono preamplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor DC servo motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminum
Anlaufmoment >1.0 kgf.cm
Bremssystem Electronic brake
Gleichlaufschwankung <0.2% (WTD) @ 3 kHz (JIS)
Rauschabstand >50 dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
Phono-Vorverstärkung 36 dB nominal, RIAA equalized
USB-Funktionen A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above
Betriebsspannung 100 to 240 V, 50/60 Hz, 1.5A Max
Power Consumption 2.75 W
Abmessungen 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Gewicht 8 kg (17.6 lbs.), without dust cover
Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
Tonearm Type Balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5 mm
Overhang 16 mm
Tracking Error Angle Less than 3 degrees
Applicable Cartridge Weight 3.5-8.5 g
Anti-skating Range 0-4 g
Replacement Stylus AT-VMN95E
Communication System Bluetooth Version 5.0
Maximum Communication Range Line of sight - approx. 10 m (33')
Compatible Bluetooth Profile A2DP
Support Codec SBC, Qualcomm® aptX™ audio

Manual: https://www.audio-technica.com/media/wysiwyg/product/pdfs/eu/AT-LP120XBT-USB_UM_162501910_V2_EN_web_200826.pdf

Go to Item

AT-LP120X

299,00 €*