DJ Equipment 700 Items

With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced detail, with excellent mid-range definition
Circumaural design contours around the ears for excellent sound isolation in loud environments

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 22,000 Hz
Max Input Power: 1,300 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 47 ohms
Folding/collapsible: Yes
Weight: (Without cable) 7.8 oz (220 g)
Cable - Detachable: No
Cable: 3 m (9.84’) Straight cable, left-side exit
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

Luxury leadwireset
LW-7N is the hybrid lead wire made of Ultra High Purity Copper wire of 7N and 6 N. The end of wire is fastened by Rhodium plated terminal.
As there is no foreign particle other than Copper 7N (99.99999 % purity) in the wire, music signal can be transmitted without any noise.

Technical data:
• High purity Cu wire 7NCu: 3 x φ 0.26mm
• High purity Cu wire 6NCu: 16 x φ0.10mm

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 7N with the SH-4 headshell requies the LW 7N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Introducing the CTRL CASE APC 64 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Akai APC 64 it is a very lightweight and convenient solution to carry the instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• AKAI APC 64

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 41 x 32 x 10 cm
• Inner measures: 37,5 x 28,5 x 9 cm
• Weight: 1,1 kg

Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• Ableton Push III
• Ableton Push I
• Ableton Push

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 43 x 37 x 10,5 cm
• Inner measures: 39 x 33 x 5 cm
• Weight: 1,3 kg

Despite the tight tolerances of the hole in the center of the vinyl,

(0.286'' +0.001'' / -0.002''),

it sometimes happens that the hole is less than 0.284'' min.

In solution to this problem, we offer you our reamer

STABLE 33.33

Completely redesigned to allow you better control when correcting the diameter in the center of your vinyl, this small tool is very

simple to use.

You can now easily correct this small deviation of the diameter in the center of your vinyls which were too tight to put on your turntable.

Video: https://youtu.be/b8l5BRlgSHM

18g TechniHard™ adjustable headshell with AT6101 quad wire.

A 18g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

15g TechniHard™ adjustable headshell with AT6101 quad wire.

A 15g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH15/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

Open-back headphones with self-adjusting headband support mechanism - suitable for hours of use with home audio and video systems. Offers full, high-quality sound.

Features:
• Open-air design, featuring 40mm CCAW drivers, delivers rich, detailed sound
• Honeycomb-punched aluminium housings enable clear sound reproduction
• Self-adjusting headband support provides comfortable fit even during extended wear
• Soft, cloth earpads reduce pressure on your ears

Specifications:
• Driver Diameter: Open-back dynamic 40mm
• Frequency Response: 18 - 25,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 93 dB/mW
• Impedance: 35 ohms
• Weight: 240g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Closed-back dynamic headphones
High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.

Features:
• Large 53 mm CCAW bobbin-wound voice coil drivers reproduce full, wide-range sound
• Anti-vibration aluminium housings ensure rich sound reproduction
• Self-adjusting headband support mechanism automatically delivers the best possible fit
• Bass-ports create tight, deep bass sound
• Soft foam earpads provide extra comfort while listening

Specifications:
• Driver Diameter: Closed-back dynamic 53mm
• Frequency Response: 10 - 25,000 Hz
• Maximum Input Power: 1,800mW
• Sensitivity: 106 dB/mW
• Impedance: 40 ohms
• Weight: 270g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

MM Phono Pre-amplifier

Good sound from sound technology
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)

Features
• Amplification and RIAA equalisation for MM cartridges
• Small size allows installation close to record player

107x36x104 (115)mm

Manual: http://www.project-audio.com/inhalt/en/manual/manual_phonoboxmm.pdf

The AIAIAI TMA-2 Headband H03 is made from H03 nylon (SKU 01203) and equipped with synthetic leather padding for high comfort.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-FLX4, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Pioneer DDJ-FLX4 Controller

Specifications:
• Weight: 1,78 kg / 3.916 lbs
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 48.8 x 27.9 x 8.5 cm | 19.2 x 10.9 x 3.4 inch
• Material: Durashock molded EVA foam

Jesse Dean Contactless Scratch Fader for your Stanton STX portable turntable.

The all new high performance fader for ultra fast cuts.

Digitally controlled.

The fader features billet aluminum rail blocks for a robust construction.

Extremely easy cut-In adjustment without having to remove your fader.
Simply calibrate your fader from the top!

45mm glider travel with standard mounting hole pattern for preferred alignment.

Kit includes:

• JDDX2R-SX fader
• Black JDD fader plate
• Black fader cap
• Mini screwdriver for cut adjustment

JDDX2R-SX calibration instructions: https://www.youtube.com/watch?v=Gm3RpM8ughI&t=3s
Stock fader calibration instructions: https://www.youtube.com/watch?v=4o4nG07CUcA

45 RECOD-BAG 100

The new MAGMA 45 RECORD-BAG 100 is the latest addition to MAGMA’s 45 bag range and perfectly holds up to 100 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. Additional accessories such as headphones, a needle-case and 45-adapters can be stored in the two zippered side-pockets.

FITS:

• 100 x 7” Vinyl-Singles
• 45 Adapters & accessories

BASICS:

• Heavy duty and 100% waterproof 1680D Ballistic-Nylon
• Integrated PVC walls for ultimate protection and stable fit
• Two side pockets fits headphones, needle-case and 45-adapters
• Internal zippered mesh-compartment
• Detachable shoulder-strap

SPECS:

• Outer measures: 29 x 20 x 21 cm (incl. side pockets)
• Inner measures: 19,5 x 18 x 19 cm
• Weight: 0,9 kg

45 Adapter not included.

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Das Tonabnehmer-Set AT-VM95E/H wird im Audio-TechnicaWerk
in Fukui (Japan) vormontiert, getestet und verpackt.
• Gesamtgewicht 15,5 g

AT-VM95E/H
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95E/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95E

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Willen is the mighty portable speaker that is made to go everywhere with you. A top-of-class IP67 dust and waterproof rating means it’s always ready for the road. Willen is ready to roll whenever you are with a hefty 15+ hours of portable playtime on a single charge.

WILLEN KEY FEATURES
• Marshall signature sound
• Iconic & rugged design
• 15+ hours of portable playtime
• Dust & waterproof (IP67)
• Fastening strap
• Built-in microphone

MARSHALL SIGNATURE SOUND
Built with one 2’’ full range driver and two passive radiators, Willen brings you the heavy Marshall sound you can’t live without. High-fidelity Marshall tuning and solid instrument separation stands Willen head and shoulders above its competition. Power your music with Marshall signature sound every single time, even when the session isn’t planned.

ICONIC & RUGGED DESIGN
Willen brings together the iconic Marshall design with a ruggedness that dares you to push its limits. This compact powerhouse is the ultimate on-the-go speaker that makes sure your music is king. Willen is raring to go wherever you go.

15+ HOURS OF PORTABLE PLAYTIME
Willen is ready to roll whenever you are with a hefty 15+ hours of portable playtime on a single charge. Whenever you need to top up its battery, 3 hours of charging will bring it back to full power.

DUST AND WATERPROOF (IP67)
Designed to shake off the elements. This outdoor speaker couldn’t care less about what you throw at it with its top-of-class IP67 dust and waterproof rating. It’s always ready for the road, rain or dirt won’t stop the session.

FASTENING STRAP
Willen is the ultimate multi-purpose speaker with its flexible positioning. Stand it up, lay it down, fix it to an object or let it hang out with its rubber back-mounted strap. Attach Willen anywhere you can think of and share your music with anyone who wants to hear it.

BUILT-IN MICROPHONE
Make sure your voice is heard with Willen’s built-in microphone. Answer and reject calls using the front-mounted control knob and enjoy some hands-free chat. Whether you’re taking a quick work call or video chatting with friends around the world, Willen will make sure no one misses a word.

MULTI-DIRECTIONAL CONTROL KNOB
Enjoy a more hands-on music listening experience by using Willen's front-mounted multi-directional control knob. You can play, pause, skip tracks and adjust the volume of your speaker, as well as turn it on or off.

APP COMPATIBLE
The shortest distance between you and your music is Willen – just pair and play without any complicated set-up. Connect with Bluetooth 5.1 and control your music in the dedicated Marshall app. If you want to adjust your sound, you can choose between three equaliser presets. With Willen, no heavy thinking is required, just heavy listening.

PRODUCT DETAILS
• PLAY TIME: 15+ HOURS
• STEREO/MONO: MONO
• WATER RESISTANCE: IP67 DUST- AND WATERPROOF
• DIMENSIONS: 101,6 X 100,5 X 40,4 MM / 4 X 3.96 X 1.59 IN

Wireless Over-Ear Headphones

The ATH-M20xBT over-ear wireless headphones include all the features you want and the audio quality you demand. Inspired by our #1 selling ATH-M20x wired professional studio headphones and featuring powerful 40 mm drivers for enhanced low-frequency performance, the ATH-M20xBT Bluetooth headphones deliver an incredible listening experience with full-range, high-fidelity audio and enhanced bass.

Enjoy a sonic signature tuned to reflect our wired studio monitor headphones wherever you go. The ATH-M20xBT has a multipoint pairing capability that lets you connect wirelessly to two devices, optimal for multimedia use. The wireless headphones are also equipped with a low latency mode that improves the synchronicity between audio and video for smooth streaming and gaming.

Audio-Technica over-ear headphones provide excellent sound isolation in loud environments. Combining modern design and high-quality materials, the ATH-M20xBT delivers an ideal listening experience for those that put audio first.

The ATH-M20xBT headphones have a long battery life, providing up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection). The microphone and buttons built into the left earcup let you easily control calls, music playback, and volume. Constructed with professional-grade ear pad and headband material, the ATH-M20xBT was built for long-lasting durability and comfort.

Included Accessories: The ATH-M20xBT comes with a 1.2 m (3.9') cable for an optional wired connection.

The Features You Expect - The Studio Sound You Demand
Enjoy all the convenience, comfort and sound of a wireless design. The classic, high-fidelity M20x studio sound with enhanced bass is now yours to take with you wherever you go.

To Keep You Going - 60-Hr Battery Life
With the ATH-M20xBT headphones your music is always there for you. A full charge gives you up to 60 hours of playback, a 10-minute rapid charge provides up to 3 hours.

Best of Both Worlds - Wired or Wireless
The ATH-M20xBT comes with a detachable audio cable so you can use the headphones with a standard wired connection whenever you want or need to.

Features:
• Wireless, on-the-go design delivers the same sonic signature as the wired ATH-M20x professional studio headphones
• 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection)
• Microphone and buttons built into the left earcup let you easily control calls, music playback, and volume
• Over-ear design for excellent sound isolation in loud environments
• Professional-grade earpad and headband material for long-lasting durability and comfort
• Includes 1.2 m (3.9') cable for optional wired connection

Specifications Headphones:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 32,000 Hz
• Sensitivity: 100 dB/mW
• Impedance: 36 ohms
• Weight: Approx. 216 g (7.6 oz)
• Charging Time: Approx. 4 hours*
• Operating Temperature: 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time: Continuous transmission time (music playback): Max. approx. 60 hours*
• Microphone Sensitivity: -42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 to 20,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Power Supply: DC 3.7 V lithium polymer battery
• Accessories Included: USB charging cable (30 cm (12”), USB Type-A / USB Type-C). Audio cable (1.2 m (3.9’) /3.5 mm (1/8”) gold-plated stereo mini-plug (3 pole/L-shaped))
(Notes: For product improvement, the product is subject to modification without notice.)

Specifications Bluetooth®:
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight - approx. 10 m (33')
• Maximum RF Output: 10 mW EIRP
• Frequency Band: 2.402 GHz to 2.480 GHz
• Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method: FHSS
• Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
• Support Codec: AAC, SBC
• Supported Content Protection Method: SCMS-T
• Transmission Band: 20 to 20,000 Hz

* The above figures depend on operating conditions.

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Gold Replacement stylus
Perfect for usage in discotheques and clubs: provides the best possible sound quality available in a DJ cartridge!

Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. Compatible to a very wide range of turntables.

Using the cartridge for the first time feels like striking gold. It is indeed the flagship product with its gold plating and special Pro E diamond. The Gold enjoys an excellent reputation for its amazing sound quality.

Available only with an elliptical stylus, the Concorde Gold is for DJs who will settle for nothing but the very best!

Technical data:
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/- 2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Gold (discontinued and no longer available)

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

factory – melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in arpeggio and chord play styles
parameter locks.
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-14/en

sub – bass line synthesizer and sequencer with parameter locks, punch-in effects and play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in bass oriented play styles
parameter locks
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-12/en

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 г (12.5-17.5 мН)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 310 Universal
*) Typical value

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

With a capacity of up to 200 singles, the 7-inch record case is a must-have for anyone who likes to DJ. The lid of the DJ record case is firmly installed on 2 sturdy metal hinges. The sturdy construction made of aluminium, plastic-coated MDF panels and soft padding on the inside provides singles with excellent protection against bumps, light and heat. A lockable snap lock with key protects your singles from theft. The record case for singles is easy to carry by the case handle. Despite its huge capacity, sturdy construction and high-quality materials, the Vinyl Record Case has a low tare weight.

Technical details:

• Record case 7 inch with a maximum capacity of 200 single records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 43,5 x 22,5 x 22,5 cm
• Weight 3,1 kg

A Digital DJ looking for a professional, durable case solution for your NI Traktor Kontrol S4 MK3/ S2 MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor Kontrol S4 MK3/ S2 MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 1,89 kg / 4.158 lbs
• EAN: 8718969213073
• Outer Dimensions (W x H x D): 61 x 38 x 13 cm | 24 x 14.9 x 5.1 inch
• Inner Dimensions (W x H x D): 58.5 x 35.5 x 8.4 cm | 23 x 13.9 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Shoulder strap

Fits:
• NI Traktor Kontrol S4 MK3/ S2 MK3 Controller
• Pioneer DDJ-REV1
• Numark Mixstream Pro
• Behringer RD-8
• Roland DJ-707M

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,75 kg / 3.85 lbs
• EAN: 8717228279850
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 59.3 x 35.3 x 9.0 cm | 23.3 x 13.9 x 3.5 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-RR, DDJ-SB3, DDJ-SB2, DDJ-SR2, DDJ-SR, DDJ-Ergo V
• NI Traktor Kontrol S3, S4 MK3, S2 MK3, S5, S4 MK2, S2 MK2, Maschine Studio, Komplete Kontrol A25, Komplete Kontrol S25
• Numark Mixstream Pro, Mixtrack Pro FX, Mixtrack Platinum FX, Mixtrack Platinum, NVII, Mixtrack Pro 3, Mixtrack Quad, N4, iDJ Pro
• Denon MC4000
• Akai MPC Renaissance, MPK225, MPK25
• Reloop Beatmix 4
• Novation 25 SL MK2, Nocturn 25, Impulse 25
• Roland DJ-707M, System-1 Plug Out Synthesizer
• Hercules DJControl Inpulse 300
• M-Audio Axiom 25
• Allen & Heath Xone 4D
• Mixars Primo
• Alesis Q25, QX25
• Korg Modwave, Opsix

The AT-LH11H is a universal ½"-mount aluminum headshell that weighs only 11 grams – the lightest in the LH series – allowing it to be used with a wider range of cartridges on more turntables and tonearms than the other models.

With its non-threaded through-holes, the AT-LH11H is ideal for mounting cartridges with threaded mounting holes, such as the AT-OC9X, AT-ART9X, and VM95 Series cartridges. Like all LH models, this headshell has a hard anodized finish that reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. The headshell includes cartridge installation screws, plastic washers, and a hexagonal wrench.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

The Vinya line from the VS series by ZOMO is the latest generation of vinyl stands.

Thanks to its elegant, timeless design, the Vinya 50 cuts a fine figure in any living room, study or studio and keeps your record collection safe and secure at all times. The beloved vinyls stand in an upright position in the shelf and thus offer protection against deformation, caused by incorrect storage.

The vinyl shelf has extra wide feet that ensure a stable and secure stand, even when completely filled with records. The deformation-resistant, powder-coated steel gives the shelf the necessary stability, so that you will enjoy your vinyl collection for a long time.

The Vinya series is available in 3 different versions:

Vinya 50 - With space for up to 50 records

Features Zomo VS-Rack Vinya 50
•Vinyl stand with space for up to 50 LPs (depending on the thickness of the records)
•Stable and secure stand
•Unique design
•Robust construction made of powder-coated steel
•High quality from ZOMO
Technical data
•Material: steel - powder-coated
•Weight: 1,7 kg
•Dimensions (W x D x H): 300x 190 x 455 mm

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - White Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - Paprika Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Stylus for Goldring E3 MM Cartridge

Just needle, not the complete cartridge included!

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

The Zomo VS-Box Space is a modern storage solution for LPs. It convinces with its exceptional design and high quality. The surface is laminated with robust and water-repellent decor and available in the colours black, white, Zebrano and walnut. This piece of furniture is a definite eye-catcher in your living room.

Features

Capacity: 100-120 LPs
Exclusive design
Premium quality
Specifications

Dimensions: 460x400x370 mm
Weight: 3,7 kg

This UDG Record Bag is a medium size bag that holds up to 50 12 inch vinyl records. The U9500 is equipped with a removable shoulder strap (padded shoulder pad included), top handles, plus it's foam padded with PVC reinforced walls for extra protection.
Weight: approx. 1.2 kg.
Dimensions: approx. 34 x 29 x 35 cm (13.4 x 11.4 x 13.8 inch).
100% nylon, 840D.

In accordance with our mission to provide the vinyl enthusiast with the most beautiful, durable and flexible vinyl storage available we are extremely proud to offer our newest member of the Music Box family the 'Big Ten Inch Record Box'.

So in the words of Steven Tyler " Now whip out your big ten inch."

The 10 inch record has a long history dating back to 1947 and offered exclusively by Columbia Records at the time. The 10 Inch Record was revolutionary in that it offered a chance for labels and artists to present more songs on a single platter than previous iterations. The 10 inch record was originally marketed as a 'Long Playing' or LP record and reigned supreme until about 1954 with the advent and popularity of the 12 inch Record. Still and all, this proud slab of wax continues to live in hearts and bins of many collectors.

The 10 inch record is often offered as a unique keepsake for fans and a chance for an artist to release a superior sound quality recording when cut at 45 rpm. Deep uncrowded grooves!

This special Music Box has been designed to specifically hold and protect 10 inch Vinyl Records. It can used vertically or horizontally.

Internal Dimensions:
• 28cm x 28cm x 28cm

Exterior Dimensions:
• 316mm x 316mm x 298mm (L x W x H)

Sourced and crafted in Europe!

As with all our Oak Music Boxes we use 18mm thick edge glued Oak and 'tongue and groove' joinery in the construction and our oil is composed of Cooked Linseed, White Spirits, pigment and siccatief (a drying agent).

The POM-16 is a stand alone keyboard with individual tuneable keys and a programmable step sequencer. designed to send cv, gate, midi, and po sync to control the POM 400 or other synthesizers.

• powder coated aluminum chassis
• keyboard and sequencer
• stores up to 64 patterns
• battery power option

screwdriver and an illustrated build guide also included.

The new Clearaudio Turntable Vinyl Harmo-nicer mat: A genius development to improve any turntable sound quality.

This new turntable mat, made out of pure vinyl, will improve the contact between the platter surface and the LP. Every LP-record will sound more dynamic and more authentic. More balanced sound at low frequency and higher definition at middle and high frequency. This is possible becouse of the fact, that the vinyl Harmo-nicer mat is made from pure vinyl and has therefore identical speed propagation velocity as a LP. Tehe overall vibration energy - coused by tracking process - is trasfered with no reflection to teh platter.

The bottom surface of the Harmo-nicer mat is absulutely flat and polished. the top surface of Harmo-nicer mat has a special surface structure, which ensures maximum contact points to the LP-record surface than a regular platter surface.

Highest performace will be achieved if you are using the Clearaudio Outer Limit, Clearaudio Locator and a Clearaudio Record Clamp (e.g. Clever Clamp). The use of the Harmo-nicer turntable platter mat results in a bass control improvement, a better tonal balance. more precision in the middle and high frequencies and a highe overall dynamic.

Please note: While using the Clearaudio Harmo-nicer, you should re-adjust the VTA (Vertical-Tracking-Angle), accordingly to the trickness of the Harmo-nicer. The Harmo-nicer can be cleaned like a normal record, we do recommend to use the clearaudio record cleaning machine Matrix.

Technical specifications:

Outer diameter: 292 mm
Maximum Thickness: 2,4 mm
Weight: 190 g
Material: vinyl

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Wood
•SKU: A003104
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040989
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes