DJ Equipment 367 Items

WiFi Module for Transparent speakers. Connect your speakers using Transparent WiFi module and stream your music through WiFi. Easy to connect with the AudioCast app. Use your iPhone®, iPad®, Android phone and tablet, Mac® and Windows® laptop and cast music to your Transparent Speakers through your house. With one wireless system you can get a multi-room set up and play music everywhere.

CONNECTIVITY
• Connect your Transparent Speaker to your voice assistant devices such as Amazon Alexa and Siri devices
• Compatible with Airplay 2
• Stream music directly from any device that supports Spotify Connect and Tidal Connect
• Stream music from Deezer, Qobuz, Amazon Music, Napster, Pandora, Tuneln etc. using the iEAST App.

DESIGN
• Dimensions (mm): 54.25 x 54.25 x 13.45
• Color: Black

SOUND
• Wi-Fi: 2.4G and 5G
• Bluetooth: 5.0 and 5.2
• Output: 24bit/192Khz

WHAT'S IN THE BOX?
• iEAST Olio Streamer
• USB Type C Cable
• AUX Cable
• User manual

What is a Wi-Fi Module and what is it used for?
The iEast Olio Wi-Fi Module is a wireless sound streamer that turns your speakers into a Wireless Multi-room sound system by connecting to your home Wi-Fi network. In other words this means that you can play synchronized music in multiple rooms in your home. For instance if you have four speakers in your home, with an easy setup you can then enjoy your music everywhere.

Do I need a Wi-Fi Module to use my speaker?
No, the Wi-Fi Module just gives you the option to stream music using your Wi-Fi and to stream music simultaneously to multiple speakers. You can also play via the built in Bluetooth and through the 3.5 mm cable that is included with your speaker purchase.

Does the Wi-Fi Module work with all networks?
The Wi-Fi Module is compatible with both 2.4G and 5.0G Wi-Fi router.

How does Wi-Fi connection compare to Bluetooth connection?
The biggest difference is that Bluetooth only allows for short-range data transfer between devices. Bluetooth also limits the number of devices that can connect at one time. With Wi-Fi connection, as long as you have a good Wi-Fi connection you can connect multiple speakers and have a long distance between them. Some also think that the audio quality is better when streaming music with Wi-Fi.

Can I use the Wi-Fi Module with my current Transparent Speaker?
Depending on when you bought your speaker, there might be a few extra setups you need to consider.

Small Transparent Speaker:
If your serial number is lower than H1908STS you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the bottom of the Small Transparent Speaker.

Transparent Speaker:
If your serial number is H2103TS or lower you need to power the Wi-Fi Module from a wall socket and not directly from your speaker.

The serial number is located in the back of the Transparent Speaker.
How do I connect to the Wi-Fi Module?

To connect to the iEast Olio Wi-Fi Module, please follow these steps:
1. Download the "iEast Controller" app from App Store or Google Play Store on your smartphone or tablet.
Make sure your device is connected to the same WiFi you want to connect your speakers to.
2. Connect the USB cable to the Wi-Fi Module and to your Transparent Speaker on the rear/bottom panel.
3. Connect the music cable to the Wi-Fi Module and to the Line in socket on the rear/bottom panel.
4. Switch on your speaker and set the volume knob +50% to hear the various sound effects.
5. The Wi-Fi Module should now automatically go to set up mode and you should hear "Now in set up mode..." from the speaker.
6. Open the iEast app and select "Add device" from the menu.

7. Follow the on-screen instructions to connect the iEast Olio Wi-Fi Module to your home Wi-Fi network. You will need to enter your Wi-Fi network name and password.

8. Once the iEast Olio Wi-Fi Module is connected to your Wi-Fi network, it will appear in the iEast app. You can now start streaming music to your Transparent speaker.

9. Repeat the steps to connect multiple speakers.

You can also find video instructions further down on this page.

How do I create a group/multiroom set up?
1. First, follow the previous instructions on how to connect to the Wi-Fi Module.
2. In the "Devices" menu where you can see all your connected modules and speakers, click the small icon that looks like two speakers with a + sign.
3. Simple check each speaker that you wish to add to the group.
4. You should consider clicking the letter L/R/LR in the devices info box, to set your various speakers to a wider stereo mode if they are in the same room. Then you set one or more speakers on one side of the room to L and the other side to R. If you will play music in many rooms you might prefer to have all in LR setting.

How do I get the Wi-Fi Module to set up mode?
To put a previously connected module in set up mode, when its connected and power is on, press the small button on the Wi-Fi Module for about 5 seconds and release. You should now hear "Now in setup mode..."

How do I do a factory reset on the Wi-Fi Module?
Press the small button longer than 5 seconds and release, then you should hear "...has been reset".

Can I connect the Wi-Fi Module to other speaker brands than Transparent?
Yes, as long as the speaker got a USB connection and a line in jack it should be all good to go.

Do I need one Wi-Fi Module to each speaker I'd like to connect?
Yes you do.

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

Simply called, "The Natural", this gorgeous box takes your vinyl to the purest depths of aesthetic glory. The unadorned beauty of pure natural oak, enhanced only by its own unique grain, will be sure to compliment your records and listening room in unadulterated analog magic dust.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation.

This beautiful solid oak Music Box is strong and durable with a prominent grain that makes each box unique. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.

Specifications
Dimensions: 14 mm (0.55") diameter × 27 mm (1.06") to 39 mm (1.54") height*
Lift bar movable width: 3 mm (0.12")
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55") diameter × 12 mm (0.47") height; 14 mm (0.55") diameter × 24 mm (0.94") height)

* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.

NEW - Now with the alcohol-free Disco-Antistat Ultraclean concentrate!

Practical care set for basic cleaning.

Makes LPs permanently antistatic, with Disco-Antistat Ultraclean Concentrate a concentrate that works deep into the groove and cleans the records gently and thoroughly.

The care set consists of:
• Washing case with inserted brushes made of goat hair.
• Label cover with suspension axle for LPs, singles and 10 inch.
• 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
• Disco-Antistat Mixture replacement bottle suitable for mixing the Ultraclean concentrate
• Funnel and filter with which the liquid is filtered back into the bottle after use.
• Drip stand (drying stand) with collection tray for 15 LPs or singles (slides into the case after use)

Made in Germany!

VM520EB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Bonded profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 23,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN20EB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM520EB_UM_V2_11L_web_161021.pdf

Technical data
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,6-2,0 g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Stylus colour Translucent

A Digital DJ/Producer looking for a professional, durable case solution for your Rane One? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Rane One, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Rane One
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
72,00cm

HEIGHT
43,00cm

DEPTH
14,00cm

INNER DIMENSIONS

WIDTH
68,80cm

HEIGHT
34,70cm

DEPTH
6,80cm

WEIGHT
2,27kg

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 2,36 kg / 5.192 lbs
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ MC7000
• Reloop Mixon 4

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

A Digital DJ looking for a professional, durable case solution for your CDJ/ DJM/ Battle Mixers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the CDJ/ DJM/ Battle Mixers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight 1,54 kg / 3.388 lbs
EAN 8718969210621
Color Black
Outer Dimensions (W x H x D) cm: 47 x 40 x 14.5 | inch: 18.5 x 15.7 x 5.7
Inner Dimensions (W x H x D) cm: 42 x 35 x 13.5 | inch: 16.5 x 13.8 x 5.3
Material Durashock molded EVA foam
Protection Adjustable EVA padding to customize main compartment to your gear
Extra's Heavy-duty handle
Convenient shoulder strap
Easy grip zipper puller
Fits - Pioneer CDJ-2000NXS2, DJM-900NX2, XDJ-1000MK2, CDJ-900NXS, CDJ-1000MK3, DJM-750 K/S, DJM-800, DJM-850 K/S/W, DJM-900SRT, DJM-T1, DJM-S9, DJM-S3, DJS-1000, DVJ-1000
- NI Traktor Z2
- Numark Scratch, M6 SUB, V7, X7
- Akai MPC2000XL
- Rane Sixty Eight, Sixty Four, MP2015, MP2014, Empath, Sixty One, Sixty Two/Two Z, TTM 56S, TTM 57 MKII, TTM 57SL
- Denon SC5000, SC5000M, S3700, SC2900, SC3900, X1100, X1600, X1700
- Reloop Elite, KUT, RMX-90 DVS, RMX-60, RMX-80, RMP-4
- Allen & Heath Xone 96, Xone PX5, Xone 43C, Xone 42, Xone 62, Xone 92, Xone DB2, Xone DB4, Xone 22, Xone 23C
- Behringer DDM4000
- Gemini CDJ-700, MDJ-1000
- Mixars Quattro, MODEL1
- Technics SH-EX1200
- Vestax TR-1
or similar size mixers and cd players
or check UDG Bag Finder

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

"The Brown Bomber" Seductive, sturdy and breathtaking. Handcrafted Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer DDJ-REV5 Controller + power adapter, extra cables

Specifications:
• Weight: 2,26 kg / 4.972 lbs
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
• Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
• Material: Durashock molded EVA foam

Now with 2-way Bluetooth!

The Bluetooth Voyager briefcase design record player stands out because of the sleek grill at the front where the two speakers are behind, waiting for you to turn up the volume. Get the best use out of your record player with the 2-way Bluetooth receiver. Use the Voyager as a Bluetooth speaker and listen daily to your digital music, or connect an external Bluetooth speaker for an amplified sound. The Voyager record player also comes with Pitch Control, Aux-in, Headphone jack and RCA output.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3 ¾”, 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

The new RIOT DJ BACKPACK LITE is the smallest member of our RIOT Pack family and is the perfect DJ and daypack for those who like to travel lite, unobtrusive and with a basic gear setup. The interior layout allows for quick access to numerous storage pouches, with clear organization for your laptop, 12’’ records, headphones, soundcards, cables, accessories and other daily needs. The ultra-compact design meets the personal item requirements of most airlines and can be easily stowed underneath the seat or in the overhead bin.

FITS

Laptop up to 17"
NI Maschine MK3
NI Maschine Micro MK3
Numark DJ2Go
Pioneer DDJ-200
Reloop Spin
Vestax Handytrax
Laptop-Stand
12“ Vinyl
Accessories

BASICS

Heavy duty and 100% waterproof Tarpaulin
PVC-coated zippers
210D Lining lining
PVC-coated zippers
210D lining
Versatile interior layout
180 degree access
Separate laptop compartment
Hidden pocket for documents and personal belongings
Padded back panel with airflow system
Ergonomic backpack straps and adjustable sternum strap
Trolley-sling

SPECS

+ Outer dimensions: (H/B/T): 46 x 33 x 15 cm

+ Inner dimensions: 44 x 32 x 14 cm

+ Weight: 1,1 kg



+ Color: black/bionic-green (Item-No.: 47888 / EAN-Code: 4041212478887)

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let’s you safely store your digital controller (such as the Pioneer DDJ-SX/SR or Numark NS6) in the main compartment. The UDG Controller Sleeve is available in 3 sizes: Medium, Large & Extra Large skillfully designed to fit many different models of equipment safely during transport.

Fits to:

* Pioneer DDJ-RZ
* Pioneer DDJ-SZ
* Numark NS7 FX
* Numark NS7 2
* Denon MCX8000
* Denon DJ Prime 4

Specifications:

Color Black
Weight 2,72 kg / 5.984 lbs
Outer Dimensions 92.2 x 49.2 x 19.5 cm | 36.3 x 19.4 x 7.7 inch
Inner Dimensions 89.2 x 46.2 x 10.5 cm | 35.1 x 18.2 x 4.1 inch
Material Water repellent laminated 600D Polyester exterior
Protection Egg Crate interior protects jog wheels, faders & buttons. Adjustable foam inserts to customize main compartment to your gear
Extra's Easy grip zipper pulls. Convenient carry handle & padded shoulder strap
Fits Pioneer DDJ-SZ, Numark NS7 II/ NS7 FX

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 750 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

THE NEW JESSE DEAN DESIGNS JDDPTA

PORTABLE TURNTABLE TONE ARM KIT.



WITH THESE FEATURES:

• 3K CARBON FIBER TUBE AND HEAD SHELL
• BILLET ALUMINUM GIMBAL WITH BALLBEARINGS
• CUSTOM ENGINEERED LIMITED BOUNCE TENSION SYSTEM
• PHONO PRE-AMP INCLUDED
• EASY WIRE INSTALLATION KIT
• Made in SoCal, USA
CAPATABILITY:

NUMARK PT-01
NUMARK PT-01USB
NUMARK PT-01SCRATCH
VESTAX HANDYTRAX
VESTAX HANDYTRAX-USB

Weight 10 oz
Dimensions 10 x 3 x 2 in

Installation Guide:
[youtube https://www.youtube.com/watch?v=kKWMM6O2rRA?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

[youtube https://www.youtube.com/watch?v=bidUVnQ_49k?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE OR OTHER TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

A piece for pierced ears, it consists of a
classic silver hoop earring with a fine curb
chain which attaches to an ear plug. When
not in your ear, the plug becomes the tip of
an extravagant dangle earring.

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

Cutting-edge engineering and robust construction
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned flat for incredibly accurate sound monitoring across the entire frequency range
Circumaural design contours around the ears for excellent sound isolation in loud environments
90° swiveling earcups for easy, one-ear monitoring
Professional-grade earpad and headband material delivers more durability and comfort
Detachable cable (2 cables included)

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 24,000 Hz
Max Input Power: 1,600 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: (Without cable) 8.5 oz (240 g)
Cable - Detachable: Yes
Cable Includes: 1.2m-3m coiled, 3m straight cablesConnector Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
Channel balance at 1 kHz - 1.5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1.6-2.0 g (16-20 mN)
Tracking force, recommended - 1.8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
2M standard and 2M Verso cartridges weight - 7.2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

Due to its especially sturdy construction with a scratch-resistant black hexagon texture pattern the Reloop Premium Turntable Case is ideal for professional use. Thanks to the foam padding this case is also perfectly suitable for live applications as the tonearm is secured against vibrations. The 4-panel foam layout provides enough space for cables. Thanks to the cable feedthrough on the backside of the case it is easy to connect your turntable without taking it out.

FEATURES
• Professional turntable case
• Protective foam padding
• Removable cover
• Especially sturdy construction
• Scratch-resistant black hexagon texture
• Comfortable carrying handle
• Rotund protective corners
• Cable feedthrough on the backside of the case
• 4-panel foam layout provides enough space for cables

TECHNICAL DATA
• Internal dimensions: 464 x 165 x 357 mm (L x H x B)
• External dimensions: 528 x 240 x 429 mm (L x H x B)
• Weight: 8.5 kg
• Supply without decoration

https://www.reloop.com/media/custom/upload/Reloop-cases_and_bags_compatibility_2020.pdf

MM phono cartridge for turntables

Beautiful design and superior sound!

The Pro-Ject Pick it S2 MM is manufactured by the cartridge experts at Ortofon and voiced by the design team at Pro-Ject. It is equipped with a special elliptical stylus tip. It provides detailed sound reproduction and expansive imaging. It is a no-nonsense performer with fascinating musical resources. Attached to a strong cantilever, used in DJ cartridges, this cartridge will not just sound great, it is also very strong.
The cartridge is made from a unique combination of technologies. Among others Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which compares with MC cartridges. The superior treble output provides a dynamic and warm sound.
Inspired by the diamond found on the stylus, the Pick it S2 MM is a beautiful design featuring a new and unique semi-transparent grey color. It goes perfectly with most Pro-Ject record players.

Features:
• Moving Magnet principle
• Split pole pins enables frequency responses that compares very well to MC cartridges
• Strong cantilever based in high-end DJ cantilevers
• Suitable for low to medium tonearm masses
• 1/2 inch mounting standard
• High trackability
• Pick it S2 MM should be connected to phono MM inputs
• As with most MM cartridges, stylus may be exchanged

Technical Specifications:
• Weight: 7.2 g
• Stylus type: elliptical
• Frequency response: 20 - 20.000 Hz
• Output voltage: 7 mV
• Recommended tracking force: 1,8 g (mN)
• Trackability (315 Hz, lateral): 70 µm
• Recommended load capacitance: 150 - 300 pF
• Recommended load resistance: 47 kΩ

ROLLTOP BACKPACK III

The Rolltop Backpack III is an extremely rugged, entirely weather-proof and multi-functional backpack that is suitable for a wide variety applications. From carrying your DJ- equipment, to convenient carry-on luggage, or just as a regular daypack, the Rolltop Backpack III does it all well. Its bicycle messenger inspired design features a variable “rolltop” opening that gives you an extra 24 cm when unfolded to fit oversized gear like the Pioneer DDJ-SX2/DDJ-RX, the Numark NS-6, 2-octave keyboard controllers, or even multi-effect pedals.

FITS
Pioneer DDJ-SX2
Pioneer DDJ-RX
Pioneer DDJ-SR
Pioneer DDJ-RR
Pioneer DDJ-S1/T1
Pioneer DDJ-Ergo
Pioneer XDJ-R1
Pioneer XDJ-Aero
Roland DJ-808
Denon MC-7000
NI Kontrol S8
NI KOntrol S4
NI Kontrol S5
Numark NS6
Numark 4Track
Numark N4
Numark Mixdeck Quad
Numark MIxtrack Pro III
Numark IDJPro
Reloop Mixon4
Reloop Terminal Mix 8

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Especially designed to carry the MAGMA CTRL CASE series
Flexible height adjustment through variable Rolltop Closure
Zippered side access laptop compartment with waterproof zippers
Two accessory pockets with waterproof zippers
Ergonomic padded back panels, s-curved backpack straps, chest strap and hip belt
Hand-luggage compatible (up to 56 cm height)

SPECS
+ Outer dimensions: 53-75 x 33 x 20 cm
+ Inner dimensions: 51-70 x 32 x 19 cm
+ Weight: 1,7 kg

LW-800S is the most sophisticated lead wires composed of Pure Silver and Silver coated wire.
The end of wire is fastened by Rhodium plated terminal.
Since Silver has the best electrical conductive properties of all the metals, the LW-800S silver wire is able to transmits the very clear high tone signals, which brings the brilliant tonality to the sound reproduction.

Technical data:
• 4N Pure Silver wire: 3 x φ 0.26mm
• Silver plated Oxygen Free Copper (OFC) wire: 16 x φ0.10mm

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 8N with the SH-4 headshell requies the LW 8N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

PROFESSIONAL PREMIUM DJ AND STUDIO HEADPHONES
With the RHP-20, Reloop introduces premium DJ headphones with scene stealing, state-of-the-art aesthetics and elite sound design that is acoustically balanced for professional use.

CLEAR FREQUENCY SEPARATION
Engineered with exceptionally high audio output for a club setting and clear frequency separation with the ideal balance of mids, highs and bass, these innovative headphones are perfect for the DJ booth or the studio.

HIGH-QUALITY DESIGN
Equipped with a rotating ear cup for on-shoulder/single-ear monitoring, the RHP-20 is rugged and ready for continuous operation in even the most challenging environment with a sturdy hinge and folding mechanism made of high-quality aluminum and a hard rubber head band that withstands wear and tear.

COMFORTABLE HEADPHONES
The design is lightweight, and the ear cups are carefully crafted to surround the ears in comfort with memory foam padding covered in fine protein leather, so there is no pinching or fatigue... even on a long night. A trendsetter with pristine audio quality and robust construction, the RHP-20 sets a new standard for the professional DJ headphones.

FEATURES
• Professional DJ headphones, closed rotary and retractable construction
• Rubber paint finish
• Convenient rotating ear cup for easy on-shoulder/single-ear monitoring
• Powerful sound and clear frequency separation, optimized for DJs
• Comfortable Memory-Foam ear cup padding with fine protein-leather surface
• Large ear cup cavity surrounds ear for comfortable wear
• Accented with rubber-paint finish
• Ultra durable head band crafted with high quality hard rubber
• Solid rotatable and foldable mechanism made of sturdy aluminum
• Flat comfort construction with compact and lightweight ear cup chassis
• One-sided cable duct with removable mini XLR plug for easy cord swap
• Extremely high output rating
• Extremely solid construction for DJs' continuous operation
• Innovative and stylish deluxe headphones

TECHNICAL DATA
• Frequency range: 30 Hz - 30 kHz
• Acoustic pressure: 100 dB at 1 kHz (1 mW)
• Impedance: 25 ohms
• Max input power: 3000 mW
• Connections: 3.5/6.3 mm jack (gold-plated contacts)
• Cord: 3 m (spiral cable)
• Weight: 270 g
• Incl. high-quality carrying bag with folding mechanism

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck
foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: Technics SL-1200MK7, SL-1200GR, Denon VL12 Prime, Reloop RP-8000 MK2, Pioneer PLX-1000/ 500
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with trong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Rear cable access hole with cover
• Protective egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 49 x 42,3 x 21 cm
Inner: 48 x 41,3 x 20 cm

Weight: 4,55 kg / 10.01 lbs

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX6/ DDJ-1000SRT/ XDJ-RX2/ Denon DJ MCX8000/ Roland DJ-808 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer DDJ-FLX6/ DDJ-1000SRT/ XDJ-RX2/ Denon DJ MCX8000/ Roland DJ808 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 2,55 kg / 5.61 lbs
• EAN: 8718969211246
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.1 cm | 30.4 x 18.4 x 5.1 inch
• Inner Dimensions (W x H x D): 76.2 x 45.7 x 12.1 cm | 30.0 x 18.0 x 4.7 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior, Removable egg-crate foam prevent damage from vibrations and shocks

Extra's:
• Removable padding with cable and power adapter storage
• Easy grip zipper puller
• Convenient carry handles
• Shoulder strap

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-1000, XDJ-RX2, XDJ-RX
• Denon DJ MCX8000
• Roland DJ-808
• Numark NS7III/ NS7II/ NS7
• Laptop, power adapter, extra cables

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

EAN 8718969212694
Color Black
Weight 4,55 kg / 10.01 lbs
Outer Dimensions (W x H x D) 49 x 42.3 x 21 cm | 19.3 x 16.6 x 8.3 inch
Inner Dimensions (W x H x D) 48 x 41.3 x 20 cm | 18.9 x 16.2 x 7.9 inch
Material Aluminum
Protection Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & foam on lid
Two side strong butterfly lock & solid metal hinges
Rubber feet at the bottom for support in standing
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Rear cable access hole with cover
Fits Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE,
Denon VL12 Prime,
Pioneer PLX-1000, PLX-500
Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver,
Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN,
Stanton STR8-150 M2, ST-150 M2, T.52, T.55 USB, T.62 M2, T.92 M2 USB,
Mixars STA, LTA,
Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII,
or similar size turntable

The Reloop Stand Hub is the industry's first innovative combination of multi-functional laptop stand and advanced USB hub with power delivery port. It is ideally suited for DJs and producers thanks to a stable power supply and networking of hardware peripherals.

FLEXIBLE APPLICATION POSSIBILITIES
The soft contact surfaces protect and provide a non-slip surface for your equipment. The deep black powder coating in a scratch-resistant finish makes the Stand Hub very resistant even when used frequently.

MULTI-FUNCTIONAL
Thanks to the push-lock mechanism, 6 possible setup variants offer a wide range of applications. Due to the space-saving and compact design, these are ideal for use in studio or live setups.

USB POWER DELIVERY
MacBooks and laptops with USB-C power connection can be powered directly from the Stand Hub via the USB-C PD port.

Works as active or passive USB-C / USB-A hub with all laptops.

CONNECTION OF DEVICES
The Stand Hub has 4 high-retention USB-A 3.0 ports, one USB-C port for connecting laptops and smart devices and one USB-C PD port for both, passive and active use.

UNIVERSALLY COMPATIBLE
Macbooks, iPads, notebooks and various other devices (11''-18'') can be easily connected via plug- and-play, thanks to very broad compatibility.

CONNECTIVITY &
PROTECTIVE BAG
Incl. protective bag for safe transportation
of Stand Hub and connection cables:

- USB C to C (30 cm)
- USB C to A (25 cm)
- USB C to A (50 cm)

FEATURES
Industry's first innovative combination of multi-functional laptop stand & advanced USB C-Hub with power delivery support
The ultimate USB hub for DJs, producers & creative minds providing stable power routing and connectivity for all your devices
Flexible assembly with 6 different positions for a wide range of applications and places
Features Laptop Stand:
Multi-functional design for various setups:
1) Classic C-shape: Classic laptop stand configuration
2) Lower C-shape: Optimized for use with keyboard, modular controllers or tablets
3) Z-shape: Stable setup for an optimal working height position
4) Lower Z-shape: Flat design for tablets and controllers
5) Higher-Z-shape: Elevated design of the classic Z-Shape for extended height
6) Transport position: Flat transport size
Space-saving, collapsible and lightweight construction
Swift and tool-free assembly thanks to an easy push-lock mechanism
Soft foam pads to protect your devices and non-slip rubber base for stability
Suitable for all common laptop sizes (11''-18''), tablets, controllers and more
Deep black and scratch-resistant powder coating
Incl. protective bag for safe transportation of Stand Hub and connection cables
Features USB hub:
Designed for DJ and studio setups to optimize your workspace
MacBook Pro and laptops with USB-C power connection can be powered directly from the Stand Hub via the USB-C PD port (3.2 Gen 1, SuperSpeed PD5)
Extend your connectivity: 4x USB-A 3.0 ports for fast data transfer with SuperSpeed support
Can be used in Active or Passive USB hub mode (a USB power supply is recommended for a stable connection; available as accessory)
Plug and play connection without any driver installation
Built-In Short circuit-, overcurrent-, overvoltage- and overheating-protection
Scope Of Delivery: 2x USB-A to USB-C, 1x USB-C to C, transportation bag with zipper, user manual

TECHNICAL DATA
Connections:
1x USB-C 3.2 Gen 1 (SuperSpeed 5 Gbps, for connection to computer)
1x USB-C PD 3.2 Gen 1 (SuperSpeed PD5, for power supplies up to 60 watts)
4x USB-A 3.0 (hub ports in high-retention design / downward compatible)
Laptop Stand Data:
Load capacity: 5 kg
Weight: 1.4 kg
Dimensions: 290 x 250 x 270 mm (w x h x d)
Scope Of Delivery:
Laptop Stand
1 x USB-C to C cable (30 cm)
1 x USB-A to C cable (25 cm)
1 x USB-A to C cable (50 cm)
transportation bag with zipper
user manual: https://www.reloop.com/media/custom/upload/Reloop-Stand_Hub_Instruction_Manual.pdf
video: https://youtu.be/90ZzzxBOzho

The Zomo Recordcase OB-80 XT is a oblique cutted DJ case. When its open the records can be easily splitted and get clearly aranged for a better and faster search after the right vinyl.

Because of the gradient divide the records can be seen very well and are protected ideal.
The shapely design makes this case to a winner!

Sheer genius and totally cool! It´s Zomo!

Features Zomo Recordcase OB-80 XT
•Capacity: approx. 80 LPs
•light weight
•comfortable handle
•butterfly lock
•lockable by a padlock
•cool Design
•solid aluminium
•aluminium profiles
•chrome angles
•interior foam

Technical Specifications
•Size: 360 x 275 x 350 mm
•Weight: 4 kg

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

Goldring E3

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Violet
• Cantilever: Aluminium
• Stylus profile: Elliptical
• Stylus radius: 0.3 x 0.7 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

The AIAIAI TMA-2 Speaker Unit S02's features include:

• punchy speaker unit (SKU 01002)
• engineered with a titanium coated driver to reduce distortion, and designed with an internal vent allowing the middle bass to be more clear and punchy
• each set contains 2 pcs

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding & egg-crate foam on lid
• Two side strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Removable front access panel

Specifications:
• Weight: 4,50 kg / 9.9 lbs
• Outer Dimensions (W x H x D): 49 x 42.3 x 21 cm | 19.3 x 16.6 x 8.3 inch
• Inner Dimensions (W x H x D): 48 x 41.3 x 20 cm | 18.9 x 16.2 x 7.9 inch
• Material: Aluminum

Fits:
Pioneer DJM-S11, DJM-S9, DJM-900NXS2, CDJ-2000NXS2, DJM-750MK2, XDJ1000MK2, CDJ-900NXS, DJS-1000, CDJ-1000MK3, CDJ-850, Toraiz SP-16,
Denon DJ Prime Go, SC6000/M Prime, SC5000/M Prime, X1850 Prime, X1800 Prime,
Akai Force, MPC Live/ II, APC40 MKII, MPD232,
Reloop Elite, Beatpad 2, RMX-60, RMX-90 DVS,
Rane Seventy, Seventy-Two, Twelve, MP2015
Allen & Heath Xone 43C, Xone 92, Xone 96, Xone DB4, Xone PX5,
Arturia Drumbrute, Keylab 25,
Behringer DDM4000,
Gemini MDJ-1000,
Hercules DJControl Air S Series, DJControl Jogvision, Universal DJ,
Korg MicroKey 25,
Livid OHM 64,
Mixars Quattro,
MODEL1,
NI Maschine Studio,
Novation AFX, 25SL MkII, Bass Station II, Launchkey 25
Roland Aira MX-1, TR-8, TR-8S,
Stanton DJC.4, SCS.4DJ,
or similar size equipment

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.

Premium Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Dimensions:
• External Specs: 367mm x 367mmx 340mm (L x W x H)
• Internal Specs: 330mm x 330mm x 322mm
• Weight: 8.4kg / 18.5lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

taunus 1.2 | com fi | ballistic nylon black

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: certified cordura® ballistic nylon, water-repellent
colour: black
size: 48 x 38 x 8 cm

aw2019 / 2020 collections instruments

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: red

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: green

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: olive

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: deep blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: bordeaux

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: black

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Support weight for mass drives

The weight made of stainless steel ensures a better contact between the record and the platter. This suppresses mechanical resonances, which greatly improves the scannability of the microgroove. As a result, your music becomes more detailed, has a clearer resolution and a better defined bass. The ergonomic shape ensures easy handling when placing the weight on the record. It is not necessary to screw it onto the plate mandrel. The contact weight is a little over 500 grams.

Details and technical data:
• Precisely processed by CNC milling
• Avoidance of disruptive resonances, which have a negative effect on the scanning by your pickup
• Made of solid stainless steel for the perfect combination of weight (a little more than 500 grams) and size
• Ergonomic shape for easy handling
• Diameter: 73 mm
• Height: 22mm
• Diameter of the hole for the plate mandrel: 7.5 mm
• Made in Japan

With its round diamond, the MP-100 cartridge is particularly suitable for older records. Even scratches and dirt do not affect the pleasant, neutral sound that this system makes possible. The MP-100 is the most affordable scanner in the MP range.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height 18mm
• Needle cut: Round 0.6mm
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel separation (1kHz): > 22 dB
• Channel balance (1kHz): < 2.0 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 21 mN (18-23 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P100
• Cartridge type: without head shell

taunus 1.2 | com fi | deep blue

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: water-repellent cotton canvas w/ leather buttons
colour: deep blue
size: 48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

ATN-XP7
REPLACEMENT STYLUS FOR AT-XP7 CARTRIDGE
Elliptical bonded stylus
Tapered aluminum cantilever
Durable design for DJ application
Tracking Force Range: 2.0 to 4.0 g

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

Turntable platter

Functional and easy to use sound improvement!

Upgrade your Elemental or Essential turntable with Acryl it E. Acryl it E is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.

The change is easily made: just exchange your metal platter for Acryl it E. Acryl it E is able to improve overall performance significantly!

Features:
• Suitable for Elemental, Essential & Primary turntables
• Substitutes MDF platter
• Inert material avoids resonances
• Ideal for use with Clamp it
• Audiophile sound tuning
• Optical upvaluation

Technical Specifications:
• Material: Acryl satiniert
• Diameter: 300 mm
• Height: 20 mm
• Weight: 1,2 kg net

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV