DJ Equipment 335 Items

General purpose model for scratch and back-cueing

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for. It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
PRO cartridge weight
18,5 g

black slipmat with white logo and weapon

Blank, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 90 mm centered
• selling unit: 20 pieces
• Made in Germany

Pure white paper inner sleeve for storing 10 inch records. This inner sleeve is lined with anti-static high density polyethylene (18µ), equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening. It's suited for 25 cm diameter vinyl and Schellack records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 10" Vinyl Innenhüllen (anti-statc) - specific details:

• measures: 258 mm x 258 mm
• material: 90 g/m² pure white premium paper and polyethylene
• die-cut diameter: 100 mm centered
• anti-static
• selling unit: 50 pieces
• Made in Germany

Paper inner sleeve for storing 7 inch records. This inner sleeve is equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen (Mittelloch) - specific details:

• measures: 180 x 180 mm
• material: paper
• die-cut diameter: 80 mm centered
• selling unit: 100 pieces

Blank, unprinted cardboard sleeve for storing 10 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 25 cm diameter vinyl records as well as Schellack records, including lined or unlined inner sleeves.

Record Sleeve 10" Vinyl Cover (Mittelloch) - specific details:

• measures: 265 mm x 265 mm x 3 mm
• material: 300 g GC1 cardboard
• die-cut diameter: 100 mm centered
• selling unit: 25 pieces
• Made in Germany

The Technics One-Two Mixed Set Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

The Technics Berlin Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Deluxe paper inner sleeve for storing 7 inch records. This inner sleeve is made from 90 g/m² offset paper and equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen Deluxe - specific details:

• measures: 180 x 180 mm
• material: offset paper, 90 g/m²
• die-cut diameter: 80 mm centered
• selling unit: 100 pieces
• high-quality product, made in Germany

The analogis Vinyl Workmat is a pad for the professional cleaning of vinyl ecords and CDs. It works best with analogis DeDuster 3345.

sub – bass line synthesizer and sequencer with parameter locks, punch-in effects and play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in bass oriented play styles
parameter locks
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-12/en

The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound

The name 2M was selected from several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.
We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue Series features:

an improved engine, which provides an increased output of 5.5mV
Nude Elliptical diamond and split pole pins with a copper wire

Technical data:
• Frequency range 20-25.000 Hz
• Frequency response 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 80 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Nude Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Blue

Deluxe paper inner sleeve for storing 7 inch records. This inner sleeve is made from 90 g/m² offset paper and equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen Deluxe - specific details:

• measures: 180 x 180 mm
• material: offset paper, 90 g/m²
• die-cut diameter: 80 mm centered
• selling unit: 50 pieces
• high-quality product, made in Germany

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Blue features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, an environment-friendly material which ensures high rigidity while eliminating unwanted resonances

2M Blue adds more dynamics and resolution, sounds more open and reproduces more details than 2M Red

Output voltage at 1000 Hz, 5cm/sec. - 5,5 mV
Channel balance at 1 kHz - 1,5 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at - 3dB - 20-25.000 Hz
Frequency response - 20-20.000 Hz + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1,6-2,0g (16-20 mN)
Tracking force, recommended - 1,8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1,3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Blue
Cartridge weight - 7,2 g
Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.?? These Performance Series pressings are packaged as a single vinyl and available in three classic colours.

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the color throughout a run. Every record is unique.

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Pure white paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 x 180 mm
• material: 80 g/m² pure white premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 100 pieces

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DJ

Attention: Matches the new Concorde MkII only!

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

supplied in Flight case

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

supplied in Flight case

Replacement case for our Disco Antistat record cleaning machine Generation II, with two brushes, without drying stand.

Made in Germany!

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

VMN10CB
REPLACEMENT STYLUS FOR VM510CB & VM610MONO
Conical Bonded stylus
Bonded Round Shank construction
Blue

VM510CB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH CONICAL STYLUS
Conical Bonded stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Conical Bonded stylus for less critical tilt angle adjustment allowing more flexible use on various tonearms.
VM type dual magnet design ensures outstanding channel separation, extended frequency response and superb tracking
Lightweight tapered aluminium cantilever allows for faithful reading of the record groove
Centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB
Durable low resonance polymer housing

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 20,000Hz
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 5.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Conical Bonded
Stylus Size 0.6 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN10CB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM510CB_UM_V2_11L_web_161011.pdf

VMN20EB
REPLACEMENT STYLUS FOR VM520EB
Elliptical Bonded stylus
Bonded Round Shank construction
Blue

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

VM520EB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Bonded profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 23,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN20EB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM520EB_UM_V2_11L_web_161021.pdf

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.
Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offeres a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned , removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: waterproof durable cotton canvas
colour: deep blue

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

taunus 1.2 | com fi | deep blue

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: water-repellent cotton canvas w/ leather buttons
colour: deep blue
size: 48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Professional Grade 12″ Custom Slipmats

Material Specs
Color: White
Material: 100% polyester felt
Weight: 16oz
Dimensions: 11.75″ Diameter
Thickness: .0625 (1/16″)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Soft
Accuracy: Precise

For a clearly arranged array of record collections. The Vinyl Dividers feature an overlaying rider for labeling and stickers. A must-have for any record store.

Technical Data
•Made of flexible, thick PVC
•1 Glorious Divider per packaging unit

Features
•Helps arranging record collections
•Featuring a rider for labelling or stickers

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

•Excellent for scratching
•Very high tracking ability
•Very low vinyl wearout

The Concorde Blue cartridge system is particularly suitable for scratching, due to the special spherical stylus. With a very high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
•Excellent for scratching
•Special spherical stylus
•Very high tracking ability
•High output voltage
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 6 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

Professional Grade 12″ Custom Slipmats

Material Specs
Color: White
Material: 100% polyester felt
Weight: 16oz
Dimensions: 11.75″ Diameter
Thickness: .0625 (1/16″)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Soft
Accuracy: Precise

Features:
•Zubehörteil für Record Box-Serie
•Nachrüstbare Tür zum Verschließen einer Record Box
•Integrierte LP-Halterung für 12''-Schallplatte aus Metall
•Einfaches Einsetzen und Austauschen des Vinyl Covers
•Schnelle Anbringung dank der mitgelieferten Bohr-Schablonen
•Türverschluss mit magnetischem Push-Mechanismus
•Erhältlich mit schwarzem oder weißem Finish
•Inkl. Befestigungsmaterial

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - White Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

The 12 inch 100 register box is a box for storing, presenting and browsing through records. At the same time, it is an essential component of Record Box - a modular furniture system that perfectly suits the needs of passionate vinyl collectors with its unbeatable variety, high aesthetic standards and excellent value for money.

As a register box, the 12-inch 100 box is ideal as the top box in the modular system of record boxes. In connection with other boxes and add-ons of the modular system, there are countless options for furniture for storing and presenting records.

With a length and width of 36 centimeters, the 12-inch 100 register box is a practical helper and an attractive end to stacked record boxes. It is available in three colors and has space for around 100 records.

The register box is made of high quality MDF with a robust surface made of melamine resin. It can be connected to the other Record Box modules using specially developed adhesive dots. These serve as protection against tipping or slipping and can be removed again at any time. To expand the system or to rearrange the boxes, new adhesive points are simply attached.

Record Box stands for a passion for vinyl. The modular system offers records optimal protection and a representative space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 31.5 cm | Inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed glue dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Fits 1x minirig MRBT-Mini

Fits 1x minirig Sub 3

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

A roll container for mobile access to records, a side table that holds files, magazines and more - the rollboard is another tool that turns Record Box into a modular system that offers you unlimited freedom in realizing your ideas. It was designed for combination with 12-inch storage boxes and for storing records.
The rollboard is supplied with four sturdy rubber rollers. The glue dots specially developed for Record Box, which are attached to the contact surfaces of the rollboard and the record box, protect the attached boxes from slipping.
The Record Box rollboard is made of high quality MDF and has a resistant melamine resin surface. It is available in black and white. The assembly of the quietly running furniture casters is easy.
In combination with the 12-inch storage boxes and the 12-inch register boxes, the rollboard is a practical helper for realizing mobile furniture ideas.
Record Box stands for practical solutions for vinyl storage that fit harmoniously into any environment.

Technical details:
• Dimensions: approx. 36 x 36 x approx. 6cm
• Permissible total height: a maximum of two 12-inch boxes on top of each other secured against slipping with glue dots
• Maximum load capacity: 45kg
• Material: 15 mm MDF with melamine coating – white, black
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Record Box stands for maximum freedom in the design of functional and high-quality furniture for storage and presentation of vinyl collections. For the production of, among other things, shelves, sideboards or highboards Record Box offers two sets of top and baseboards.

The baseboard is a pedestal board equipped with adjustable feet that can compensate for minor unevenness of the floor. The topboard forms the top finish, providing a smooth top surface for sideboards, DJ racks, shelving and more.

Measuring 72 inches long and 36 inches wide, the topboard and sideboard set for two 12-inch boxes is perfect for combining with 12-inch 110-storage boxes and 12-inch 50-storage boxes. The since is available in two colors and holds two 12-inch 110-storage boxes or four 12-inch 50-storage boxes. Depending on the arrangement of the boxes, the colors of the modules used and the selection of register boxes or add-ons, an individual piece of furniture is created according to the user's wishes.

Topboard and baseboard are made of high quality MDF and have a surface of melamine resin. The boards are connected to the record boxes using specially developed adhesive points - without any screws at all. The adhesive dots are attached to connection points on the clean surface and can be loosened with a flick of the wrist and removed later without leaving any residue. They protect against slipping and tipping and offer maximum freedom when arranging the modules.

Using the 12-inch storage boxes, the top and sideboards can also be used to create attractive solutions for storing folders, books and other items.

Record Box stands for attractive record furniture, design freedom and an unbeatable price-performance ratio.

Technical details:
• Dimensions: approx. 72 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, without hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

12" Dividers for LP collections, white

• 320 x 350 mm
• Rounded edges
• One side matt/sand-blasted, one side glossy/smooth
• Can be labelled with felt markers, writing can be removed with alcohol
• 10 units weigh around one kilogram
• Made in Germany

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, with hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

Blank, unprinted cardboard sleeve for storing 2 x 12 inch records. This gatefold sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl Double LP Gatefold Cover (White) - specific details:

• measures: 315 x 315 x 5 mm
• material: cardboard, 300 g/m²
• white, shining
• selling unit: 10 pieces
• Made in Germany

Blank, unprinted cardboard sleeve for storing 12 inch picture disc records. This cover is equipped with a large centered die-cut hole, so artwork is available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl LP Picture Cover (White) - specific details:

• measures: 315 x 312 x 3 mm
• material: cardboard, 300 g/m²
• die-cut diameter: 260 mm centered (single-sided)
• selling unit: 10 pieces
• Made in Germany

• Personalise your turntable with slipmats
• Provides protection for your vinyl from scuffs and scratches and also for your turntable
• Made from high quality felt, our slipmats make DJing mixing easier
• Vibration dampening qualities
• 12“ diameter

The Zomo Divider is an optional accessory for the Zomo-VS-Boxes and the deckstand Vegas. It can be used to divide the LP-compartments into four sub compartments for cds and dvds.

Features:
• Extension of the Zomo VS-Boxes series with CD and DVD compartments
• Capacity: 40 - 80 CDs or 20 CDs + 20 DVDs
• Material: MDF wood fibreboard
• Unique design
• High-quality workmanship
• Great optics

Specifications:
• Dimensions: 329 x 319 x 339 mm
• Weight: 3 kg

Suitable for the following Zomo products:
• Zomo Deck Stand Vegas
• Zomo VS-Box 100
• Zomo VS-Box 100/2
• Zomo VS-Box 100/4
• Zomo VS-Box 200
• Zomo VS-Box 200/2
• Zomo VS-Box 400

Format:
• 7" Singles
• CDs
• LPs