DJ Equipment 263 Items

General purpose model for scratch and back-cueing

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for. It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
PRO cartridge weight
18,5 g

black slipmat with white logo and weapon

Blank, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 90 mm centered
• selling unit: 20 pieces
• Made in Germany

Pure white paper inner sleeve for storing 10 inch records. This inner sleeve is lined with anti-static high density polyethylene (18µ), equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening. It's suited for 25 cm diameter vinyl and Schellack records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 10" Vinyl Innenhüllen (anti-statc) - specific details:

• measures: 258 mm x 258 mm
• material: 90 g/m² pure white premium paper and polyethylene
• die-cut diameter: 100 mm centered
• anti-static
• selling unit: 50 pieces
• Made in Germany

Paper inner sleeve for storing 7 inch records. This inner sleeve is equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen (Mittelloch) - specific details:

• measures: 180 x 180 mm
• material: paper
• die-cut diameter: 80 mm centered
• selling unit: 100 pieces

Blank, unprinted cardboard sleeve for storing 10 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 25 cm diameter vinyl records as well as Schellack records, including lined or unlined inner sleeves.

Record Sleeve 10" Vinyl Cover (Mittelloch) - specific details:

• measures: 265 mm x 265 mm x 3 mm
• material: 300 g GC1 cardboard
• die-cut diameter: 100 mm centered
• selling unit: 25 pieces
• Made in Germany

The Technics One-Two Mixed Set Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

The Technics Berlin Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Deluxe paper inner sleeve for storing 7 inch records. This inner sleeve is made from 90 g/m² offset paper and equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen Deluxe - specific details:

• measures: 180 x 180 mm
• material: offset paper, 90 g/m²
• die-cut diameter: 80 mm centered
• selling unit: 100 pieces
• high-quality product, made in Germany

The analogis Vinyl Workmat is a pad for the professional cleaning of vinyl ecords and CDs. It works best with analogis DeDuster 3345.

Deluxe paper inner sleeve for storing 7 inch records. This inner sleeve is made from 90 g/m² offset paper and equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen Deluxe - specific details:

• measures: 180 x 180 mm
• material: offset paper, 90 g/m²
• die-cut diameter: 80 mm centered
• selling unit: 50 pieces
• high-quality product, made in Germany

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Pure white paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 x 180 mm
• material: 80 g/m² pure white premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 100 pieces

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

supplied in Flight case

Replacement case for our Disco Antistat record cleaning machine Generation II, with two brushes, without drying stand.

Made in Germany!

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.
Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Professional Grade 12″ Custom Slipmats

Material Specs
Color: White
Material: 100% polyester felt
Weight: 16oz
Dimensions: 11.75″ Diameter
Thickness: .0625 (1/16″)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Soft
Accuracy: Precise

For a clearly arranged array of record collections. The Vinyl Dividers feature an overlaying rider for labeling and stickers. A must-have for any record store.

Technical Data
•Made of flexible, thick PVC
•1 Glorious Divider per packaging unit

Features
•Helps arranging record collections
•Featuring a rider for labelling or stickers

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

Professional Grade 12″ Custom Slipmats

Material Specs
Color: White
Material: 100% polyester felt
Weight: 16oz
Dimensions: 11.75″ Diameter
Thickness: .0625 (1/16″)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Soft
Accuracy: Precise

Features:
•Zubehörteil für Record Box-Serie
•Nachrüstbare Tür zum Verschließen einer Record Box
•Integrierte LP-Halterung für 12''-Schallplatte aus Metall
•Einfaches Einsetzen und Austauschen des Vinyl Covers
•Schnelle Anbringung dank der mitgelieferten Bohr-Schablonen
•Türverschluss mit magnetischem Push-Mechanismus
•Erhältlich mit schwarzem oder weißem Finish
•Inkl. Befestigungsmaterial

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - White Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

The 12 inch 100 register box is a box for storing, presenting and browsing through records. At the same time, it is an essential component of Record Box - a modular furniture system that perfectly suits the needs of passionate vinyl collectors with its unbeatable variety, high aesthetic standards and excellent value for money.

As a register box, the 12-inch 100 box is ideal as the top box in the modular system of record boxes. In connection with other boxes and add-ons of the modular system, there are countless options for furniture for storing and presenting records.

With a length and width of 36 centimeters, the 12-inch 100 register box is a practical helper and an attractive end to stacked record boxes. It is available in three colors and has space for around 100 records.

The register box is made of high quality MDF with a robust surface made of melamine resin. It can be connected to the other Record Box modules using specially developed adhesive dots. These serve as protection against tipping or slipping and can be removed again at any time. To expand the system or to rearrange the boxes, new adhesive points are simply attached.

Record Box stands for a passion for vinyl. The modular system offers records optimal protection and a representative space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 31.5 cm | Inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed glue dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Fits 1x minirig MRBT-Mini

Fits 1x minirig Sub 3

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

A roll container for mobile access to records, a side table that holds files, magazines and more - the rollboard is another tool that turns Record Box into a modular system that offers you unlimited freedom in realizing your ideas. It was designed for combination with 12-inch storage boxes and for storing records.
The rollboard is supplied with four sturdy rubber rollers. The glue dots specially developed for Record Box, which are attached to the contact surfaces of the rollboard and the record box, protect the attached boxes from slipping.
The Record Box rollboard is made of high quality MDF and has a resistant melamine resin surface. It is available in black and white. The assembly of the quietly running furniture casters is easy.
In combination with the 12-inch storage boxes and the 12-inch register boxes, the rollboard is a practical helper for realizing mobile furniture ideas.
Record Box stands for practical solutions for vinyl storage that fit harmoniously into any environment.

Technical details:
• Dimensions: approx. 36 x 36 x approx. 6cm
• Permissible total height: a maximum of two 12-inch boxes on top of each other secured against slipping with glue dots
• Maximum load capacity: 45kg
• Material: 15 mm MDF with melamine coating – white, black
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Record Box stands for maximum freedom in the design of functional and high-quality furniture for storage and presentation of vinyl collections. For the production of, among other things, shelves, sideboards or highboards Record Box offers two sets of top and baseboards.

The baseboard is a pedestal board equipped with adjustable feet that can compensate for minor unevenness of the floor. The topboard forms the top finish, providing a smooth top surface for sideboards, DJ racks, shelving and more.

Measuring 72 inches long and 36 inches wide, the topboard and sideboard set for two 12-inch boxes is perfect for combining with 12-inch 110-storage boxes and 12-inch 50-storage boxes. The since is available in two colors and holds two 12-inch 110-storage boxes or four 12-inch 50-storage boxes. Depending on the arrangement of the boxes, the colors of the modules used and the selection of register boxes or add-ons, an individual piece of furniture is created according to the user's wishes.

Topboard and baseboard are made of high quality MDF and have a surface of melamine resin. The boards are connected to the record boxes using specially developed adhesive points - without any screws at all. The adhesive dots are attached to connection points on the clean surface and can be loosened with a flick of the wrist and removed later without leaving any residue. They protect against slipping and tipping and offer maximum freedom when arranging the modules.

Using the 12-inch storage boxes, the top and sideboards can also be used to create attractive solutions for storing folders, books and other items.

Record Box stands for attractive record furniture, design freedom and an unbeatable price-performance ratio.

Technical details:
• Dimensions: approx. 72 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, without hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

12" Dividers for LP collections, white

• 320 x 350 mm
• Rounded edges
• One side matt/sand-blasted, one side glossy/smooth
• Can be labelled with felt markers, writing can be removed with alcohol
• 10 units weigh around one kilogram
• Made in Germany

Depending on back height, LPs will fit into the pocket with a paper sleeve, cardboard sleeve or together with a booklet. Box pockets (covers) are among the classics of vinyl packaging. They are not flat, but have a 3 mm thick back - just the typical cover. LP, printed inner sleeve and possibly a lined inner sleeve fit together in the box pocket. Our covers replace the original cover if it is damaged, lost or too valuable for everyday use.

12" covers with backs, 3mm spine, with hole
• 315 mm x 312 mm x 3 mm
• 300g/m²
• Made in Germany

Blank, unprinted cardboard sleeve for storing 2 x 12 inch records. This gatefold sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl Double LP Gatefold Cover (White) - specific details:

• measures: 315 x 315 x 5 mm
• material: cardboard, 300 g/m²
• white, shining
• selling unit: 10 pieces
• Made in Germany

Blank, unprinted cardboard sleeve for storing 12 inch picture disc records. This cover is equipped with a large centered die-cut hole, so artwork is available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl LP Picture Cover (White) - specific details:

• measures: 315 x 312 x 3 mm
• material: cardboard, 300 g/m²
• die-cut diameter: 260 mm centered (single-sided)
• selling unit: 10 pieces
• Made in Germany

• Personalise your turntable with slipmats
• Provides protection for your vinyl from scuffs and scratches and also for your turntable
• Made from high quality felt, our slipmats make DJing mixing easier
• Vibration dampening qualities
• 12“ diameter

The Zomo Divider is an optional accessory for the Zomo-VS-Boxes and the deckstand Vegas. It can be used to divide the LP-compartments into four sub compartments for cds and dvds.

Features:
• Extension of the Zomo VS-Boxes series with CD and DVD compartments
• Capacity: 40 - 80 CDs or 20 CDs + 20 DVDs
• Material: MDF wood fibreboard
• Unique design
• High-quality workmanship
• Great optics

Specifications:
• Dimensions: 329 x 319 x 339 mm
• Weight: 3 kg

Suitable for the following Zomo products:
• Zomo Deck Stand Vegas
• Zomo VS-Box 100
• Zomo VS-Box 100/2
• Zomo VS-Box 100/4
• Zomo VS-Box 200
• Zomo VS-Box 200/2
• Zomo VS-Box 400

Format:
• 7" Singles
• CDs
• LPs

Brand new from Zomo: The vinyl stand Zomo VS-Rack "Loft" is an innovative and elegant way to store your vinyl records in a modern design.
The vinyl stand is not only used to store your favourite vinyl treasures, but also as a decorative element it is a great eye-catcher for any living room.
The material is made of powder-coated steel and combines durability with timeless design.

Features:
• Offers space for 45-50 LPs (depending on the thickness of the vinyl)
• Innovative, elegant design
• An eye-catcher in every apartment
• Powder-coated steel
• High quality from Zomo

Technical specifications:
• Dimensions (W x D x H): 233 x 333 x 253 mm
• Weight: 1,2 kg

Studio Industry Icon
Engineered to deliver a superior sound experience at an affordable price, the M50x have been widely acclaimed online by professionals, casual listeners and streamers. From everyday listening and commuting to gaming or studio recording, you’re in great hands with the M50x, with build quality and coveted sound engineering that’s praised by audio experts and professionals year after year.

Gaming Excellence
Consistently celebrated by critics and designed utilising over half a century of Japanese audio design and technology, you’ll hear every blast, boss and battle in stunning clarity and immersive sound through the ATH-M50x. Their wide and clear sound range allows you to discern between every layer of your game’s audio design whilst enjoying crisp musical highs and low, bassy explosions. And because the ATH-M50x is powered through the audio jack alone, you can play uninterrupted, indefinitely.
If you’re looking for streaming, online and co-op communication, the optional ATGM2 Detachable Gaming Boom Microphone is the perfect accompaniment to online gameplay with exceptional pickup and clarity that can be easily detached or flicked up when not needed.

Professional Home Studio Headphones
With 55 years of Japanese audio design, Audio-Technica is loved by many of the world’s biggest artists, vocalists and musicians and the M50x headphones remain one of our most popular innovations to date. Whether you’re a music industry veteran or you’re looking to start recording at home, the ATH-M50x are an excellent choice of headphones for listening back to or monitoring your audio performance.
Either from your computer/audio receiver or plugged directly into your microphone for monitoring (as with our AT2020 or AT2020USB+ microphones), the ATH-M50x headphones deliver stunning sound design.

The Extraordinary Everyday
Rated highly for their professional-grade comfort, foldable versatility, strong construction and excellent sound design, the ATH-M50x are an exquisite choice as your audio daily drivers. Whether it’s travel, your daily commute or working and studying at home, you’ll love their all-day comfort and immersive sound design. Offering passive noise isolation through circumaural design contours, our M50x headphones provide a high-quality audio experience, helping you to boost your concentration and productivity at work and allowing you to meditatively switch off on your commute.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Collapsible for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)
• Top choice for studio tracking and mixing, as well as DJ monitoring and personal listening

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45mm
• Frequency Response: 15 - 28,000 Hz
• Maximum Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Weight: 285g without cable/connector
• Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Screw-on 1/4” adapter, pouch

ATH-PRO5X DJ Headphones - Over-ear style delivers exceptional isolation and long-wearing comfort, Maximum input power of 1,500mW enables operation at higher volume levels and Newly developed 40mm drivers reproduce extended frequency response.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 35,000 Hz
• Maximum Input Power: 1,500 mW
• Sensitivity: 100 dB/mW
• Impedance: 34 ohms
• Weight: 250 g (without cable and connector)
• Cable: -Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable
• Cable: -Detachable 1.2 m (3.9') straight cable
• Accessories Included: 6.3 mm (1/4") screw-on adapter

Experience exceptional sound clarity with Audio-Technica's ATH-S220BT wireless headphones, featuring up to 60 hours’ battery life and multipoint connectivity.

ATH-S220BT are lightweight, relaxed-fit headphones built to provide extended comfort. Weighing in at just 180g (6.3 oz) - around the same weight as a 12" vinyl record - the ATH-S220BT headphones’ intelligent design helps prevent neck and shoulder strain so you can enjoy album after album or gaming sessions with friends.

From listening to your favourite tunes through your smartphone to browsing the latest viral videos on a laptop or tablet, you’ll experience powerful sound from every source.

Since 1962, Audio-Technica has been devoted to providing listeners with the very best in sound quality and there’s no compromise to that dedication when it comes to our truly immersive ATH-S220BT best budget wireless headphones

These affordable wireless headphones also have a quick charge feature - they can be charged in ten minutes for 3.5 hours of listening time. Plus, with a USB type A to USB Type C™ cable included, you’re able to charge with ease using a variety of different devices.

If you’re looking for the best headphones under £100, look no further. Incorporating an abundance of features, the ATH-S220BT headphones are also compatible with both Siri and Google Assistant, so you’re able to access your device’s speech recognition function at the touch of a button. Receive notifications, send messages and control your audio playback without lifting a finger.

Features:

60 Hr Battery
The Audio-Technica ATH-S220BT is an ideal choice for those looking for Bluetooth headphones with a long battery life – making them a reliable travel companion or top selection for settling down to listen to your favourite album or podcast.

Multipoint Pairing
Connect to your smartphone, PC or tablet simultaneously and take the stress away from having to switch between multiple devices.

Built-In Mic and Controls
You’ll experience exceptionally clear audio thanks to the ATH-S220BT’s high-quality built-in microphone.

Wired and Wireless Listening
For a wired audio experience, use the included 1.2m cable. With a built-in microphone and remote, the plug-in option provides the ultimate flexibility for those wishing to experience superior sound whilst conserving battery power.

Immediate Voice Sync on Videos
Whether you’re watching TikTok videos on your daily commute or enjoying the latest Netflix series, even the slightest audio lag can impact your experience. With low latency mode on the Audio-Technica ATH-S220BT, you can enjoy minimal sound delay and crystal-clear audio.

• Up to 60 hours of continuous use on a full charge and up to 3.5 hours of use on a 10-minute rapid charge (via USB-C connection)
• Slim housings with sleek, lightweight earpads exert less pressure on your ears for a comfortable fit with good sound isolation
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Google Fast Pair lets you quickly pair headphones with an Android smartphone or other device
• Voice guidance function provides helpful notifications, including power and pairing status, and remaining battery level
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
• Type: Closed‐back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 - 32,000 Hz
• Sensitivity: 105 dB/mW
• Impedance: 32 ohms
• Battery: DC 3.7 V lithium polymer battery
• Battery Life: Approx. 60 hours continuous use (music playback)
• Weight: Approx. 180 g (6.3 oz)
• Charging Time: Approx. 4 hours
• Cable: Detachable 1.2 m iS controller cable with mic
• Connector: 3.5 mm (1/8″) stereo mini
• Microphone Type: Electret condenser
• Microphone Sensitivity: ‐42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 - 4,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Accessories Included: USB charging cable (30 cm (12”), USB Type‐A / USB Type‐C) cable with in‐line mic and control (1.2 m (3.9’) /3.5 mm (1/8”) gold‐plated stereo mini‐plug (4 pole/L‐shaped))
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight ‐ approx. 10 m (33')

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

7" Dividers for single collections, black

• 185 x 210 mm
• Rounded edges
• One side matt/sand-blasted, one side glossy/smooth
• Can be labelled with felt markers, writing can be removed with alcohol
• Made in Germany

In addition to the record and register boxes, Record Box has a special offer for vinyl collectors and lovers of modern furniture systems: With the highboard set consisting of 4 boxes for 12-inch records + top & baseboards, customers benefit from attractive price savings compared to purchsing the boxes separately.
The sets are particularly interesting for collectors who already have a large number of records and want to get a lot of storage space for an attractive price. The record boxes as part of this set offer space for approx. 450 12-inch records.
The highboard set is available in classic white and black, can be expanded as required and individually supplemented with other products from the Record Box furniture system to create unique pieces of furniture. Whether as a DJ rack, hi-fi furniture, room divider or record shelf - the possible uses of the highboard are almost unlimited.
The set consists of four record boxes that are placed on a baseboard. A top board forms the upper end with a smooth, straight surface.
The unique furniture system from Record Box stands for diversity, which allows vinyl collectors to realize their individual wishes for the storage and presentation of their records. Like all furniture in the Record Box System, the boxes and boards are made of high-quality MDF, which has been covered with a robust layer of melamine. Innovative adhesive dots reliably protect against slipping. A wall mounting set is available in the shop for additional security.

4 boxes for 12 inch records + top & baseboards
Technical details & components set:
• Dimensions of the furniture in total: approx. 72.3 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard small
• 4x 12-inch 110 storage boxes
• 2x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

With the set of roll container, register and storage boxes, Record Box is making an attractive offer for passionate vinyl collectors: Buying a set represents a price advantage compared to buying the components individually and offers an uncomplicated and individual solution for the mobile storage of records and more.
When developing the Record Box furniture system, the specific needs of vinyl collectors were directly taken into account. In this way, the storage box and the register box can be easily attached to the rollboard and added to a piece of furniture that is as practical as it is attractive. The register box is the top end and invites you to leaf through the records stored in it.
The three modular pieces are connected using specially developed glue dots that can be easily removed at any time. In the blink of an eye you can create a side table, a roll container, coffee table or record shelf that can be moved freely around the room.
The furniture is made of high quality MDF with a robust melamine coating and offers an attractive price-performance ratio.
The set is available in black and white, offering space for around 200 records and, like the other modules of the Record Box furniture system, is used to implement creative and individual solutions for vinyl storage and presentation.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x78cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x 12-inch 100 register box
• 1x connecting elements glue dots from »Record Box«
• Assembly instructions
• Material: 15 mm MDF with melamine coating - white or black
• Boxes for self-assembly - screwdriver required!

With the Record Box Highboard Det with 6 boxes for 12-inch records + top & baseboards, an individual piece of furniture can be constructed in no time, which offers vinyl collectors plenty of space for the presentation and storage of their records. In combination with the top and baseboards, the six record boxes create an approximately 1.08 m wide, 76 cm high and 36 cm deep highboard with space for more than 600 records.
Compared to buying the boxes and boards individually, the set offers an attractive price and is an ideal starter set for vinyl lovers who want to gradually expand their existing collection.
The highboard set is available in black and white and can be expanded as required with the register and record boxes from the Record Box system to create individual pieces of furniture. With creativity, unique highboards, DJ racks, room dividers and shelves can be created.
The record boxes of the set are stacked on a baseboard and connected using the innovative glue dots. The top board that belongs to the set forms the upper end with a straight surface.
Record Box was specially designed for vinyl collectors and offers attractive storage space for records and much more with various boxes and practical sets.
All furniture in the system is made of high-quality MDF with a robust melamine coating. A wall securing set is available in the shop for a connection to the wall.

Technical details & components of the set:
• Dimensions of the furniture in total: approx. 108.5 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard large
• 6x 12-inch 110 storage boxes
• 3x sets of glue dots
• 1x wall mounting set
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

Record Box stands for creative furniture that gives vinyl collectors the chance to create unique pieces of furniture for storing and presenting records. The Record Box roll container is a furniture piece that can be moved around the room.
The set consists of a 12-inch record box that stands on a rollboard. The box offers space for around 110 records. The storage box is connected to the rollboard by specially developed glue dots. The set can be used as side table, roll container, office container for folder storage, a coffee table or a mobile record shelf.
The set offers a price saving compared to buying the elements individually. It is ideal as a creative addition to individually built vinyl furniture from the Record Box system and is available in black and white.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x46cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Look after your records and turn them into a work of art with this 12" frame. Make a centerpiece out of your favourite records, the perfect addition to any room in your home! The Lasgo 12" Album Cover Frame is perfect accompaniment for any music lover's music collection, made from compressed wood. Size: 36 x 36 cm (14" x 14").

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

NEW - Now with alcohol-free Disco-Antistat Ultraclean concentrate - NEW

Practical care set for record cleaning.
Disco-Antistat Ultraclean Concentrate, works deep into the groove and cleans your records gently and thoroughly even from stubborn dirt.

The care set consists of:
* Washing housing with inserted brushes made of goat hair and practical axle lock.
* Exchangeable cleaning brushes
* Label cover with suspension axle for LPs, singles and 10 inch
* 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
* Bottle for mixing the cleaning agent
* Funnel and filter with which the liquid can be filtered back into the bottle after use.
* Drip stand (drying stand) with collection tray for up to 15 LPs or singles (slides into the case after use).
* Housing with NEW - non-slip rubber feet - NEW
* NEW - Label cover with sealing rubber and hand crank for LPs/Singles/10".
* NEW - Filling line "max." - NEW for marking the filling level of the cleaning liquid.

Made in Germany!

Technical details:
• Dimensions: approx. 108 x 45 x 1,6 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Premium Alignment Tool

Your go-to precision companion for perfecting your turntable setup. Crafted to the highest standards, this tool is a larger and sturdier version, boasting a remarkable 75% increase in rigidity compared to the standard model.

The Premium Cartridge Alignment Tool features a robust build, providing enhanced durability and stability during the alignment process. Its larger size ensures a more secure grip and heightened accuracy.

With two zero points Baerwald alignment, this tool is engineered to deliver optimal tracking performance. Achieve precise cartridge alignment for accurate playback, allowing you to experience your vinyl collection with unparalleled clarity and fidelity.

How to use the alignment tool:
https://ortofon.com/pages/alignment-tool

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0