Vinyl Accessories 121 Items

AFI flat.2 Record Flattener / Relaxer
The Audio Fidelity Improvement flat.2 is a cutting-edge multifunctional record flattener and relaxer. It flattens vinyl LPs, Maxis and Singles. Using special flat mats and high-quality control electronics the flat.2 achieves an utterly even distribution of heat and therefore results that have been out of reach until now.

Preset programs provide for very simple handling. The Standard program reliably eliminates most of the warps. In addition to that, there is an Expert program with flexible settings.

The flat.2 works very precisely and has several protective mechanisms to ensure very high product and process safety. Allocation of temperature on the surface as well as at the top and bottom is homogenous. Deviation of the target value represents less than 0,25 K.

Another distinctive feature of the flat.2 is the Relaxation program. The vinyl record is heated (and afterwards cooled) very slowly, evenly and controlled to temper the record. This thermal process of tempering is a traditional physical method and causes a considerable sound improvement in most cases.

A slim construction and first-class manufacturing out of special hard glass emphasize the elegant and timeless design.

Characteristics

• special flat mats for even distribution of temperature on every spot of the vinyl record
• homogenous heating surfaces in the interior of the machine
• smart and separate control of top and bottom side
• high-quality magnetic switches for safe contact and longevity
• simple handling of standard programs
• special program of thermal relaxation / tempering for sound improvement
• high process safety due to error detection and temperature restriction mechanisms
• easy-care high-class surfaces made of hard glass
• made in Germany

Technical Specifications

• power input: max. 90 VA
• maximum temperature: 59° C (Standard program), 54-60° C (Expert program)
• deviation of target temperature: less than 0,25 K
• size: 400 x 55 x 500 mm
• weight: 8,7 kg

Review: http://www.afi-record-flattener.com/download/AFI_record_flattener_review_image-hifi_2018.pdf

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.

A freshly-cleaned vinyl record has so much more to offer: more information, more detail and better sound. That's why audio experts advocate cleaning not only your latest flea market finds but also your brand new LPs fresh from the press.
Clearaudio's smart matrix SILENT record cleaning machine combines scrupulous cleaning with oh-so-gentle handling of your precious vinyl collection. No more dust, dirt or chemical pressing residues. And, as its name suggests, this 'vinyl whisperer' comes with an exceptionally quiet operating mode. What's more, in its new enhanced edition the smart matrix SILENT is smarter than ever, sporting a raft of intelligent upgrades.

- The multi-functional cleaning arm deftly handles cleaning fluid application as well as suction, and is easily adjustable to any size of vinyl or shellac record.
- To start the cleaning process, simply swing the arm into place. No need to even press a button.
- Key components such as the motor, pump, cleaning fluid reservoir and waste fluid tank are now identical to those in our top-of-range ‘Professional’ model.
- Selecting functions and features is more intuitive and effortless than ever, thanks to new high quality, tactile push buttons for all controls.
- For ease of maintenance and transport the cleaning arm can be removed without the need for tools.
- The smart matrix SILENT is now available in a choice of silver or black, and is supplied with a matching universal clamp designed to hold any size of vinyl or shellac record securely in place.

Technical Specifications:
CONSTRUCTION PRINCIPLE
• Bi-directional rotation of the platter
• Integrated fluid application
• Very rigid chassis
• Included record clamp and single adapter
• Multifunctional cleaning arm for LPs, EPs and singles
• Easy controls

POWER CONSUMPTION
• Max. consumption: Approx. 300 watts
• Off mode: 0 watt (by switching off at the rear of the machine)

WEIGHT Approx. 10.6 kg
DIMENSIONS (W/D/H in mm) Approx. 345 × 345 × 235 (with record clamp) / Approx. 345 × 345 × 250 (with dustcover)
WARRANTY 3 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/cleaning/CA_smart%20matrix%20SILENT_E+D.pdf?d=1671461176

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

- Disco-Antistat Ultrasonic - now with NEW features!

Automatic ultrasonic record washing machine

Disco-Antistat Ultrasonic - The most thorough way to wash records!
Our record washing machine Disco-Antistat Ultrasonic combines over 45 years of experience in the care and cleaning of records with highly developed, state-of-the-art cleaning technology.

The combination of ultrasonic cleaning and our proven goat hair brush system ensures gentle, groove-deep cleaning of your records and an audible improvement in the sound image.

During operation, the cleaning fluid is permanently clarified by a filter system and dirt particles are filtered out to minimise impurities in the fluid and thus achieve the best possible cleaning result.
With our special cleaner, the record is treated antistatically and thus permanently prevented from renewed soiling by adhering dust.
Our washer is ready for use in just a few steps and the intuitive operation ensures optimal results from the very first record!

• The cleaning time can be conveniently adjusted to the level of soiling of the record, supported by a functional display. Possible cleaning time is between 1-5 minutes and can be set in steps of 10 seconds.
• A well visible progress indicator informs about the status of the cleaning at a glance. (1 LED = 10% of the set cleaning time).
• After use, the filtered cleaning fluid can be conveniently refilled into the bottle by pressing a button via the new solenoid valve.
• The permanent filtering of the liquid prevents it from accumulating coarse dirt particles. This ensures a consistent cleaning result.
• The aluminium-glass filter can be easily removed and reinstalled for cleaning.
• Inserting and removing the record is quick and easy thanks to the innovative magnetic coupling.
• Driven by a Bosch electric motor, the record rotates evenly in the new fibreglass-reinforced tub, achieving a homogeneous treatment with ultrasound (46kHz.).

Disco-Antistat Ultrasonic
Cleanliness you can hear! A powerful ultrasonic transducer (46kHz.) generates with so-called cavitation bubbles that act directly on the dirt and remove it gently and effectively.
The ultrasonic waves also reach places that are inaccessible to conventional cleaning methods and ensure cleanliness down to the depth of the groove.
The loosened dirt particles are then brushed off with the soft goat hair brushes.

Scope of delivery:
• Ultrasonic record washer
• 200ml cleaning concentrate Disco-Antistat Ultraclean (1302000)
• 1 litre Disco-Antistat BiDest, high-purity water (1302001)
• 1 microfibre cloth
• Label cover incl. axle with magnetic coupling (1302010)
• Power supply 230 VAC / 12 VDC 3A
• 1 drying rack (1302499)
• 1 sponge brush 50ml
• 1 Mixing bottle (for preparing the cleaning liquid from Disco-Antistat Ultraclean and Disco-Antist BiDest)
• Replaceable aluminium/glass filter for cleaning (1225211)
• Operating manual in 8 languages
• Dimensions: 360mm x 180mm x 235mm (W x D x H)

Made in Germany!

Kleeny MK2 Premium Record Cleaning machine

Made and engineered in Germany from experienced designers and technicans. This are the features:
• Beautifully designed, very compact housing that takes up little space
• Housing sides made of aluminum with leather-look covering
• Low operating noise thanks to noise insulation
• Silicone feet provide a secure grip and minimize structure-borne noise
• Adapter for dry vacuuming singles and 10 inch LPs included
• Robust traditional switches
• Ergonomic puck (record weight) with magnetic fixation - no screwing or clamping!
• Label protection by rubber lip
• Powerful, reliable platter motor rotates clockwise and counterclockwise
• Plate mandrel made of polished stainless steel
• Suction turbine with 250W power - does the drying in 2 revolutions!
• Platter mat made of soft, antistatic rubber
• Internal dirty water tank with drain spout, easy to empty. No hose or clamp required.
• Dry blow function protects against residual moisture and musty odor.
• Suction arm holder made of CNC milled aluminum
• Easy swinging in and out of the suction arm without screws
• Classic switch design

The robust switches could also be found in a classic sports car. The gear motor is switched on with the left switch. During washing, the direction of rotation should be changed several times by flipping the switch. The right-hand switch switches on the powerful suction turbine. It only needs 2 revolutions of the turntable and the record is dry. A high-quality record brush is part of the delivery programme.The unit can be emptied easily with the help of an outlet spout.

Secure protection for the label
The beautifully shaped puck has a sealing lip on its underside that protects the label from moisture penetration all around. Powerful magnets pull the puck onto the record. So nothing needs to be clamped or screwed. It couldn't be simpler.

Washing with premium brush attached by one click
The DRAABE Premium brush is included in the delivery. With Kleeny MK2 you don't need to hold the brush in your hand. It is simply clicked onto the wash arm. It adapts to the slight unevenness of the surface because it is suspended so that it can move. When the washing process is finished, you simply remove the brush and switch on the suction. It couldn't be simpler!

Scope of delivery - gets you ready to wash!
• Unit including, clamp, suction arm and platter mat
• Kleeny Service station with adapters for Singles and 10 Inch LPs
• Housing in noble leather look colour: bordeaux
• 200 ml Nessie cleaning lotion - ready to use, in suirt bottle for cleaning up to 40 records
• Premium record brush with click technology
• Connection cable with Euro, Swiss or UK Plug
• Manual in English language

Technical data:
• Dimensions without turntable: 280 mm x 145 mm x 230 mm
• Weight : 2,7 kg
• Power consumption "Suction" : 250 W
• Power consumption "Washing" : 12 W
• Power consumption "Stand by" : 0 W
• Diameter of turntable : 24.5 cm
• Dimensions with attached turntable : 375 mm x 245 mm x 230 mm
• Electr. connection IEC cable with plug (Euro, Swiss, UK depending of your country)
• Electr. voltage : 230V / 50Hz.
• Extraction noise : 62 db(A)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES:
• Fits: 2x Pioneer PLX-1000 / Technics SL1200 turntable and 1x Pioneer DJM-S7 Mixer + 1 x Laptop + Accessories
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Built-in corner wheels with high quality in-line skate bearings for convenient transport
• Adjustable laptop shelf
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

DIMENSIONS:
(Width x Height x Depth)

Outer: 134,5 x 51 x 23 cm
Inner turntable compartment: 45,4 x 38,7 x 7,6 cm
Inner mixer compartment: 47 x 27,7-39,5 x 7,6 cm

Weight: 25 kg | 55 lbs

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

UDG Ultimate Fold Out DJ Table is the perfect companion piece for the DJ who likes to go completely modular. Use it for a home studio set up or on stage. Constructed from sturdy 9mm thick plywood, the outer sides are laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern. It features built-in center wheels on one side with high quality in-line skate bearings for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading.

UDG Ultimate Fold Out DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down.

FEATURES:
• Increased product dimension over earlier version
• Updated with rounded corner table
• Includes new cable access with cover
• Improve powder coated anodized hardware
• Heavy duty construction of 9 mm vinyl laminated plywood
• Laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern
• Solid aluminum profiles and spring-loaded latches
• Sturdy construction
• UDG heavy-duty spring-loaded handles
• Built-in center wheels with high quality in-line skate bearings for convenient transport
• Utility shelf for storage
• Recessed butterfly twist latch lock
• Holds a Maximum Weight of 45 kg/ 100 lbs. Evenly Distributed

DIMENSIONS:
(Width x Height x Depth)

Folded: Folded: 83.5 x 91.0 x 12.0 cm | 32.9 x 35.8 x 4.7 inch
Opened: 136.0 x 91.0 x 48.0 cm | 53.5 x 35.8 x 18.9 inch

Weight: 24,30 kg / 53.46 lbs

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 2000 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

UDG Ultimate Fold Out DJ Table is the perfect companion piece for the DJ who likes to go completely modular. Use it for a home studio set up or on stage. Constructed from sturdy 9mm thick plywood, the outer sides are laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern. It features built-in center wheels on one side with high quality in-line skate bearings for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading.

UDG Ultimate Fold Out DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down.

FEATURES:
• Increased product dimension over earlier version
• Updated with rounded corner table
• Includes new cable access with cover
• Improve powder coated anodized hardware
• Heavy duty construction of 9 mm vinyl laminated plywood
• Laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern
• Solid aluminum profiles and spring-loaded latches
• Sturdy construction
• UDG heavy-duty spring-loaded handles
• Built-in center wheels with high quality in-line skate bearings for convenient transport
• Utility shelf for storage
• Recessed butterfly twist latch lock

DIMENSIONS:
(Width x Height x Depth)

Folded: 83.5 x 91.0 x 12.0 cm
Opened: 136.0 x 91.0 x 48.0 cm

Weight: 21,8 kg | 48 lbs

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm

With the Record Box Highboard Det with 6 boxes for 12-inch records + top & baseboards, an individual piece of furniture can be constructed in no time, which offers vinyl collectors plenty of space for the presentation and storage of their records. In combination with the top and baseboards, the six record boxes create an approximately 1.08 m wide, 76 cm high and 36 cm deep highboard with space for more than 600 records.
Compared to buying the boxes and boards individually, the set offers an attractive price and is an ideal starter set for vinyl lovers who want to gradually expand their existing collection.
The highboard set is available in black and white and can be expanded as required with the register and record boxes from the Record Box system to create individual pieces of furniture. With creativity, unique highboards, DJ racks, room dividers and shelves can be created.
The record boxes of the set are stacked on a baseboard and connected using the innovative glue dots. The top board that belongs to the set forms the upper end with a straight surface.
Record Box was specially designed for vinyl collectors and offers attractive storage space for records and much more with various boxes and practical sets.
All furniture in the system is made of high-quality MDF with a robust melamine coating. A wall securing set is available in the shop for a connection to the wall.

Technical details & components of the set:
• Dimensions of the furniture in total: approx. 108.5 x 36 x approx. 76 cm (LxDxH)
• 1x set top & baseboard large
• 6x 12-inch 110 storage boxes
• 3x sets of glue dots
• 1x wall mounting set
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 1 on solid walls, such as Brick.

Features:
• Resonance-free wall mount for turntables & Hifi
• Playback of records free from any influence by impact noise and vibrating floors
• WMI wall mounts use rigid steel frame construction
• Height-adjustable spikes to level the board
• Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 90 x 415 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

The Glorious Turntable Lowboard is a high-quality piece of furniture in a retro 1960’s design and is ideal for placement in your living room. With a dedicated surface for a turntable and plenty of space for your vinyl collection, the Turntable Lowboard is ideal as a listening station. The open record crate invites you to dig through your collection and allows direct access to up to 130 12''-records.

• High-quality turntable lowboard in 60s retro design for your living room
• Listening station: provides storage space for a turntabel and plenty of space for records
• Open record crate for diggin through you collection and access to up tp 130x 12"-records
• Front compartment with push mechanism for amplifiers, CDs or boocks
• Cavity on the rear panel hides unsightly wires
• Timeless design made of wood with white high-gloss finish
• Stable and elegant stand made of solid ash wood (white ash)
• Shock-absorbing rubber feet for damping vibrations

Material corpus: MDF wood with white high-gloss veneer
Material stand: Ash wood (white ash)
External dimensions corpus: 862 x 240 x 420 mm (L x H x W)
Overall height: 444 mm
Weight: 17 kg

plastic vacuum tube 10 inch

Features
•High quality stereo NF cable
•Ideal for turntable connection
•High purity (99,99%) oxygen-free copper (HP-OFC)
•2 individually shielded conductors per channel
•Semi balanced geometry
•Low capacitance
•Low distortion level, neutral sound
•Earth wire with spade connectors
•Pre-configured as RCA>RCA or 5P>RCA

Technical Specifications
•Assembly: Quasi-balanced, individually shielded twisted pairs
•Conductors: High purity oxygen free copper
•Dielectric: Polyethylen
•Hacket: Transparent PVC
•Length: Pre-configured stereo sets 1.23 m with earth wire
•Cable Capacity: 130pF
•Cable Impedance: 77Ω
•Insulation Resistance: 50MΩ (500V DC)

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

With a maximum capacity of 50 singles, the 7-inch record case offers a format that vinyl lovers have mostly searched for in vain. The small box can be transported effortlessly and is very light despite its stability. The Record Case is made of aluminium, plastic-coated MDF boards and rivets and is covered with soft foam padding on the inside. Singles in the box are thus excellently protected from shocks, heat and light. The lid of the record case is permanently installed and the box is equipped with a snap lock.The Vinyl Record Case is available in three colours: silver/silver, silver/black and black/black.

Technical details:

• Record case 7 inch with a maximum capacity of 50 singles.
• Fixed lid, snap lock
• Surface-mounted handle
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Compact solution for transporting single records
• Dimensions (LxWxH): 20,5 x 18 x 25 cm
• Weight 1,2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

This 12" Record Case is designed for archiving and transporting a maximum of 25 12-inch LPs. This format is the most compact solution in the series and is ideal for storing rarities. The lid of the Record Case is firmly installed on two metal hinges, and a snap lock with key protects against theft of individual records.

Despite its sturdy design, the record case has a low dead weight, and the surface-mounted case handle makes the box easily stackable. The construction made of aluminium, plastic-coated MDF panels, rivets and soft padding on the inside ensures optimum protection for the records. The DJ record case is available in three colour variants: silver/silver, silver/black and black/black.

Technical details:
• Record case with a maximum capacity of 25 pcs. 12" records.
• Fixed lid, snap lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 12 x 36 cm
• Weight 2 kg

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 300 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

The VS-Box 1/45 is a vinyl storage box which can be attached to the wall for your convenience. It can be fastened very easily and ensures your favourite records are always at hand. It can be combined with other boxes of the same kind for efficient storage layout. The puristic design fits in every living room and ensures that the furniture is both practical and decorative.

Features

Capacity: 40-50 LPs
Designed for mounting on the wall
Material: medium density fibreboard with laminated decor
Ageless design
High-grade workmanship
Technical Data

Dimensions: 360x170x190 mm
Weight: 2,7 kg

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Glow N Dark version of our world famous 45A seven inch vinyl record adapter.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

Great for DJ's spinning in clubs or the perfect night light for vinyl fiends.

Made in New York City at the Wax Rax lab.

Store your mixtapes and radio plays in style in our cassette rack. The 385 x 385 x 50 mm shelf, which is made of pine wood and painted white, has space for a total of 48 cassettes.
The cassette rack is part of the Vinyl Care by HHV product range, which stands for high-quality, clearly designed and affordable solutions for passionate vinyl collectors.

Whether music cassettes or radio plays - cassettes are real collector's items that are worth storing well and presenting attractively. Our cassette rack is made of black lacquered pine wood and offers space for a total of 48 cassettes in three rows.
Vinyl Care by HHV stands for practical storage and cleaning products for music lovers. All products in the series impress with their clear design and uncompromisingly good quality.

Dimensions: 385 x 385 x 50 mm

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

The FLUX-Hifi VINYL-BRUSH is designed to free the record on the turntable from surface dust and static charging. A completely new design combines velvet pads with an integrated carbon brush. The special office ensures a flat cleaning of the plate surface, dust particles are completely removed. The carbon brush prevents static charging of the record. How crackling and crackling noises are minimized and prevents further dusting of the record. Only when the LP is free of dust can the pickup system control the record without noise and Scan distortions. For cleaning the needle, we recommend the FLUX-Sonic, the innovative electronic needle cleaner.

• special Office for Record Cleaning
• gentle dust removal
• integrated carbon brush
• prevents static charging
• ergonomic housing
• Combination of velvet and carbon fiber brushes
• Weight: 45 g
• Dimensions: 11,5 x 5 x 3,5 cm

The carbon fiber brush is primarily used to remove static from the record. Here it is very important that the fiber and the aluminum housing are electrically connected and the aluminum is not coated, otherwise the static dissipation cannot be realized.

The velvet takes the dust from the surface. Our velvet has a pile height of 1.2mm, the fiber is a multifilament yarn with a high basis weight of 500g/lfm.

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 250 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Record puck
Shapely stainless steel centering unit for use with singles.

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: silver
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: black
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

The Bundle contains 5x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Features:
•Elegantes Display und Aufbewahrungsmöglichkeit für Schallplatten
•Bietet Platz für bis zu 75 Schallplatten
•Stilvolle Präsentation im zeitlosen Design aus Holzelementen und stabilem Acrylglas
•Verwendbar für alle Vinyl-Formate (7‘‘, 10‘‘, 12‘‘)
•Bequemes Stöbern seiner Vinyl-Sammlung ohne Verrutschen der Platten dank gerillter Holzführung
•Praktischer Neigungswinkel zu beiden Seiten verhindert ungewolltes Umkippen der Schallplatten

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)