Vinyl Accessories 146 Items

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 1000 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 1000 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 2000 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 200 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 200 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 250 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 300 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 7" Vinyl Schutzhülle - specific details:

• dimensions: 187 x 187 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 500 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

RS-LP2 ANTI-STATIC RECORD SLEEVES

More than 35 years ago Nagaoka added them to its program under the type designation No. 102. Because they were the best. And today, in the third development generation called RS-LP2, Nagaoka still sells them - for the same reason!

More effective than any other product, the RS-LP2 prevents the vinyl from static electricity, making it easier to remove the record, protecting the groove from damage caused by dust and preventing the unsightly audible static discharge during playback. Give it a try!

• static charge is prevented
• protects your 12" vinyl records from dust damage
• the smooth cover prevents damage to your records
• one package contains 50 pieces
• Dimensions approx.: 308 x 308 mm, rounded on one side
• Made in Japan

How to minimize the risk of ring wear of your gateold covers? Just put your vinyl goodies respectively the record sleeves in these transparent outer sleeves to keep your collection in good shape.

Record Outer Sleeve 12" Vinyl Doppel LP Gatefold Schutzhüllen - specific details:

• dimensions: 316 x 640 x 0.1 mm
• material: translucent CPP
• selling unit: 50 pieces

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 750 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

The AT-PEQ30 phono equalizer is designed specifically to upgrade a turntable with a built-in phono amplifier or to add a phono. It is compatible with turntables with VM (dual magnet), MM (moving magnet), and MC (moving coil) cartridges. The PEQ30 benefits from Audio-Technica’s years of analogue audio expertise and uses the finest quality parts in a layout that is optimized for low noise and minimum distortion.

Features:
• Selectable MM and MC input with fixed gain and impedance allows for compatibility with a wide range of moving magnet and moving coil cartridges
• High-quality FET inputs ensure a low noise signal when incorporated with a negative feedback-type phono equalizer circuit
• Precision components provide an excellent RIAA response for best-in-class performance
• The all metal construction enclosure provides superior isolation from radio and electronic noise interference
• The machined aluminium front panel and gold-plated input/output RCA connectors are examples of the high-grade material used throughout

Specifications:
• Input Impedance: MM type: 47 kiloohms, MC type: 120 ohms
• Input Sensitivity: MM type: 4.5 mV, MC type: 0.28 mV
• Rated Output: MM type: 250 mV, MC type: 250 mV
• Gain: MM type: 35 dB, MC type: 59 dB
• Signal-to-Noise Ratio: MM type: 100 dB, MC type: 74 dB
• RIAA Deviation: (20 to 20,000 Hz) MM type: ±0.5 dB
• Power Supply: DC 15 V, 1.2 A
• Power Consumption: 2.5 W
• Dimensions: 47 mm (1.85") H x 197.5 mm (7.78") W x 125.5 mm (4.94") D (excluding protrusions)
• Weight: About 890 g
• Accessories Included: AC adapter

AT617A - CARTRIDGE STYLUS CLEANER
- Specially formulated polyurethane gel removes dirt particles from stylus
- Gel remains tacky for years
- Surface is washable for repeated use

Store your mixtapes and radio plays in style in our cassette rack. The 385 x 385 x 50 mm shelf, which is made of pine wood and painted white, has space for a total of 48 cassettes.
The cassette rack is part of the Vinyl Care by HHV product range, which stands for high-quality, clearly designed and affordable solutions for passionate vinyl collectors.

Whether music cassettes or radio plays - cassettes are real collector's items that are worth storing well and presenting attractively. Our cassette rack is made of black lacquered pine wood and offers space for a total of 48 cassettes in three rows.
Vinyl Care by HHV stands for practical storage and cleaning products for music lovers. All products in the series impress with their clear design and uncompromisingly good quality.

Dimensions: 385 x 385 x 50 mm

Record puck
Shapely stainless steel centering unit for use with singles.

When you start collecting records you don’t immediately need a cabinet that can hold hundreds of records. Start small with the handy and high-quality Wiltshire furniture piece. The black wire frame makes it a sleek and minimal design. The rack at the front of the Wiltshire has room for about 10 albums. The Mango wooden frame is sturdy for a stable positioning of the turntable.

Specifications:
• Real mango wood
• White washed wood
• Individually hand finished
• Black wire storage
• Holds up to 10 Albums
• Wire record slots for record storage
• No assembly needed
• Material: MDF with Mango-coloured veneer finish, steel slots
• Weight: 5,8 kg
• Dimensions (LxWxH): 48.26 cm x 35.56 cm x 50.8 cm

The FLUX-Hifi VINYL-BRUSH is designed to free the record on the turntable from surface dust and static charging. A completely new design combines velvet pads with an integrated carbon brush. The special office ensures a flat cleaning of the plate surface, dust particles are completely removed. The carbon brush prevents static charging of the record. How crackling and crackling noises are minimized and prevents further dusting of the record. Only when the LP is free of dust can the pickup system control the record without noise and Scan distortions. For cleaning the needle, we recommend the FLUX-Sonic, the innovative electronic needle cleaner.

• special Office for Record Cleaning
• gentle dust removal
• integrated carbon brush
• prevents static charging
• ergonomic housing
• Combination of velvet and carbon fiber brushes
• Weight: 45 g
• Dimensions: 11,5 x 5 x 3,5 cm

The carbon fiber brush is primarily used to remove static from the record. Here it is very important that the fiber and the aluminum housing are electrically connected and the aluminum is not coated, otherwise the static dissipation cannot be realized.

The velvet takes the dust from the surface. Our velvet has a pile height of 1.2mm, the fiber is a multifilament yarn with a high basis weight of 500g/lfm.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

Features:
•Elegantes Display und Aufbewahrungsmöglichkeit für Schallplatten
•Bietet Platz für bis zu 75 Schallplatten
•Stilvolle Präsentation im zeitlosen Design aus Holzelementen und stabilem Acrylglas
•Verwendbar für alle Vinyl-Formate (7‘‘, 10‘‘, 12‘‘)
•Bequemes Stöbern seiner Vinyl-Sammlung ohne Verrutschen der Platten dank gerillter Holzführung
•Praktischer Neigungswinkel zu beiden Seiten verhindert ungewolltes Umkippen der Schallplatten

The Glorious Turntable Lowboard is a high-quality piece of furniture in a retro 1960’s design and is ideal for placement in your living room. With a dedicated surface for a turntable and plenty of space for your vinyl collection, the Turntable Lowboard is ideal as a listening station. The open record crate invites you to dig through your collection and allows direct access to up to 130 12''-records.

• High-quality turntable lowboard in 60s retro design for your living room
• Listening station: provides storage space for a turntabel and plenty of space for records
• Open record crate for diggin through you collection and access to up tp 130x 12"-records
• Front compartment with push mechanism for amplifiers, CDs or boocks
• Cavity on the rear panel hides unsightly wires
• Timeless design made of wood with white high-gloss finish
• Stable and elegant stand made of solid ash wood (white ash)
• Shock-absorbing rubber feet for damping vibrations

Material corpus: MDF wood with white high-gloss veneer
Material stand: Ash wood (white ash)
External dimensions corpus: 862 x 240 x 420 mm (L x H x W)
Overall height: 444 mm
Weight: 17 kg

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

Spare parts package for the record washers Generation II + Generation II PLUS.

• 1 sealing shell incl. crank axle *NEW* with 105mm diameter *NEW*
• 2 sealing rings
• 2 spare brushes
• 2 screws for axle holder
• 2 axle holders
• 1 set of non-slip rubber feet

Also suitable as upgrade from Generation II to II PLUS!

Made in Germany!

NEW - Now with alcohol-free Disco-Antistat Ultraclean concentrate - NEW

Practical care set for record cleaning.
Disco-Antistat Ultraclean Concentrate, works deep into the groove and cleans your records gently and thoroughly even from stubborn dirt.

The care set consists of:
* Washing housing with inserted brushes made of goat hair and practical axle lock.
* Exchangeable cleaning brushes
* Label cover with suspension axle for LPs, singles and 10 inch
* 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
* Bottle for mixing the cleaning agent
* Funnel and filter with which the liquid can be filtered back into the bottle after use.
* Drip stand (drying stand) with collection tray for up to 15 LPs or singles (slides into the case after use).
* Housing with NEW - non-slip rubber feet - NEW
* NEW - Label cover with sealing rubber and hand crank for LPs/Singles/10".
* NEW - Filling line "max." - NEW for marking the filling level of the cleaning liquid.

Made in Germany!

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

Simply called, "The Natural", this gorgeous box takes your vinyl to the purest depths of aesthetic glory. The unadorned beauty of pure natural oak, enhanced only by its own unique grain, will be sure to compliment your records and listening room in unadulterated analog magic dust.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation.

This beautiful solid oak Music Box is strong and durable with a prominent grain that makes each box unique. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

"The Brown Bomber" Seductive, sturdy and breathtaking. Handcrafted Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

This stunning Edge Glued Oak Music Box color was developed as a custom project from one of our clients, but we thought it looked so good we decided to offer it in our Music Box Vinyl Storage line. Use the Rosewood color exclusively or mix and match with our other Music Box colors to create a rich, unique pattern to compliment your listening room.

Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Dimensions:
• External Specs: 367mm x 367mmx 340mm (L x W x H)
• Internal Specs: 330mm x 330mm x 322mm
• Weight: 8.4kg / 18.5lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Our classic "Amp Box" is one of our most commented on and popular vinyl storage units. In order to make it more accessible to the vinyl loving public we have created a "stripped down" version.
What's different you ask? The metal logo plate and decorative screws. What's the same? The beautiful elegant thrill ride of our standard Amp Box;
premium edge glued oak wood, Fender "Ox-Blood" grill cloth, and magnetic push door.
A lovely edition to any listening room. Use it as a standalone vinyl storage unit, or incorporate into your other Music Box display for the ultimate vinyl presentation.
Our Amp Box is durable, stackable, and the perfect tribute to the countless classic guitarists who employed a Fender Tweed amp to make your favorite records.
Protect and house your records in style. Holds up to 65 Records.

**Please note that in order to properly have a door, The Amp Box is slightly wider than our other Music Boxes. It can still be stacked flush with our other Music Boxes, but there will be some extra space at the rear.

Specs:
• Height: 36.6 cm / 14.5 inches
• Width: 36.6 cm / 14.4 inches
• Length: 36.6 cm / 14.4 inches
• Weight: 8.9 kg / 19.6 lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.

Premium Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Dimensions:
• External Specs: 367mm x 367mmx 340mm (L x W x H)
• Internal Specs: 330mm x 330mm x 322mm
• Weight: 8.4kg / 18.5lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

plastic vacuum tube 10 inch

The new Ortofon Reference Interconnect cables Series is designed and manufactured by Ortofon Japan
Each of the new Reference series cables has its individual sonic expression:

- The Reference Red is an all-purpose, decent, but not too expensive cable that would be a great addition to any audio equipment. The sound is relaxed, warm and dynamic with high resolution.
- The Reference Blue is a dynamic and high-resolution cable that reveals detailed reproduction throughout the spectrum.
- The Reference Bronze has an astonishing wide-range, clear and neutral sound.
- The Reference Black is a new generation reference audio cable par excellence with a well-balanced, neutral and precise sound.

Ortofon Reference Red cable
The Reference Red Interconnect cable is a perfect combination of 4N OFC (Oxygen-free copper) and 4N HiFC (High performance pure copper) conductors. These two copper conductor materials are combined to create a warm, dynamic sound with high resolution.
The Reference Red is surrounded by shield of both 16 sets of 0.1mm x 10 copper wires and aluminum to reduce electromagnetic induced noise.
The gold plated RCA terminals provide easy, stable and durable connection.

• Cable capacity: 190pF/m
• Cable length: 1.0 m or 1.5 m
• Terminal type: RCA
• 2 pieces per set

Reference Red technical configuration
① Signal conductors:
• OFC (Oxygen-free copper) Ø 0.5 mm + Ø 0.32 mm × 7
• HiFC (High performance pure copper) Ø 0.12 mm × 28
② Signal conductors:
• OFC (Oxygen-free copper) Ø 0.5 mm + Ø 0.32 mm × 7
• HiFC (High performance pure copper) Ø 0.12 mm × 28
③ Damping material: Cotton fiber
④ Shield: Aluminuim tape
⑤ Shield: Braided Tin-plated 3N copper wire Ø 0.1 mm × 10 × 16
⑥ Insulation: Halogen-free highly resilient elastomer
⑦ Cable diameter: 7.5 mm
⑧ Insulation: PE

Features
•High quality stereo NF cable
•Ideal for turntable connection
•High purity (99,99%) oxygen-free copper (HP-OFC)
•2 individually shielded conductors per channel
•Semi balanced geometry
•Low capacitance
•Low distortion level, neutral sound
•Earth wire with spade connectors
•Pre-configured as RCA>RCA or 5P>RCA

Technical Specifications
•Assembly: Quasi-balanced, individually shielded twisted pairs
•Conductors: High purity oxygen free copper
•Dielectric: Polyethylen
•Hacket: Transparent PVC
•Length: Pre-configured stereo sets 1.23 m with earth wire
•Cable Capacity: 130pF
•Cable Impedance: 77Ω
•Insulation Resistance: 50MΩ (500V DC)

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 1 on solid walls, such as Brick.

Features:
• Resonance-free wall mount for turntables & Hifi
• Playback of records free from any influence by impact noise and vibrating floors
• WMI wall mounts use rigid steel frame construction
• Height-adjustable spikes to level the board
• Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 90 x 415 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)