Turntables 222 Items

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

Cartridge alignment tool

• Tool for cartridge alignment and adjustment
• Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
• Adaptable to accommodate differing tonearm lengths
• Also suitable for other manufacturers’ tonearms
• Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length

Stroboscope disc

Control of turntable speed.

Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low. Please note: Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.

MANUAL HIFI-TURNTABLE WITH FULL CARDAN TONEARM

For the true Vinyl Enthusiast, the CS 518 is equipped with a twin gimbal tonearm design using pivot ball-bearings for optimal precision.
This superior tonearm has the ability to guide even high end pickups with the greatest degree of precision and reliability.
The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Twin Gimbal Design
• Straight, statically balanced
• Solid aluminium construction with precision pivot ball-bearing
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: 4 x Pivot ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,9 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-518_manual_V4_DE_EN.pdf

THE MANUALRECORD PLAYER ENTRY

Emphasis on high component precision is a feature of the entire range of Dual products. This is the case for the entry model CS 418, which uses the same platform as the higher models in the product range.

The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

The CS 418 is not attractive just because it is excellent value for money, but it also offers a superb and compelling balanced sound experience and a 5 year warranty for long term ownership.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• Solid aluminium construction with ball-bearings
• Damped tonearmlift
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,8 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-418_manual_V4_DE_EN.pdf

Equipment base

Ground it deluxe 1 suitable for:
• Xtension 9 Evolution, Xtension 10 Evolution, Xtension 12 Evolution
• Signature 10
• RPM 1 Carbon, RPM 3 Carbon, RPM 5 Carbon, RPM 9 Carbon, RPM 10 Carbon

Features:
• Resonance free placement for turntables & hifi
• Heavy weight base filled with granular damping
• 2 models with adjustable spikes (3 or 4 may be fitted)
• 1 model with height adjustable magnetic feet
• Dark grey piano lacquer finish
• Matches charcoal finish of Pro-Ject turntables

Technical Specifications:
• Dimensions: 500 x 65 (45)x 400 mm incl spikes (without spikes)
• Weight: 11,6 kg

Equipment base

Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vib-rations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.

Suitable for:
• Elemental Line
• Essential Line
• Debut Line
• 1Xpression Carbon
• 1Xpression Carbon Classic
• RPM1 Carbon
• RPM3 Carbon

Features:
• Support platform for many turntables or other equipment
• Prevents the transmission of vibrations
• Heavy-weight MDF
• Conical feet with damping ring
• Height adjustable
• Combinable with Cover it E and Cover it RPM 1/3 Carbon
• High gloss piano finish

Technical Specifications:
• Dimensions: 480 x 51 x 390 mm spike feet incl.
• Weight: 4 kg

RP-7000 MK2 SILVER

• NextGen Turntable for professional Club DJs and Turntablists
• Power-Torque Direct Drive with precise motor control and stable rotation
• Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

PROFESSIONAL UPPER TORQUE TURNTABLE SYSTEM
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

STURDY CASING CONSTRUCTION
By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASE
The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

DUAL START/STOP BUTTONS, PRECISE MOTOR CONTROL AND REVERSE FUNCTION
As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

HIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADER
Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMP
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIES
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

FEATURES
New features of the MK2 version:
• Built for the club: rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and molding compound for high vibration damping and isolation
• More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
• Fine-tuned motor control for further optimization of wow and flutter and rotation
• Newly developed, height-adjustable tone arm base (VTA) and anti-skating control
• Particularly lightweight and rigid, satin aluminium material used for tone arm pipe
• Pitch scale for precise adjustments
• Optional ground terminal offers additional protection in complex club & studio environments
• Easily replaceable, freely rotatable LED needle illumination in new unibody aluminium design
• High-quality and hard-wearing silver metallic finish
• Quartz driven DJ turntable with upper-torque direct drive
• Adjustable brake speed (0.2 - 6 sec.)
• Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
• Precision manufactured, die cast aluminium turntable
• Rubber inlays for reduction of vibrations and background noise
• Statically-balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
• Universal connection for pick-up systems (SME)
• Pitch range +/-8 %, +/-16 %, +/-50 % (ultra pitch)
• Quartz lock
• Additional start/stop button for vertical positioning
• Reverse function: switch for forward and reverse playback
• Recessed connection cavity for easy flight-case installation & seamless adjustment
• Phono and line out (no grounding required)
• Removable mains and RCA cables
• Safety mains switch
• Shock-absorbing feet against vibrations
• Incl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructions, without cartridge

TECHNICAL DATA
Turntable:
• Type: direct-drive turntable
• Drive: quartz driven upper-torque direct drive
• Motor: 16-pole, 3-phase, brushless motor
• Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
• Starting torque: 2.8 – 4.5 kg/cm (adjustable)
• Adjustable stop time (0.2 - 6 sec.)
• Start-up time / change to RPM: <0.2 sec
• Wow and flutter: 0.01% WRMS*
• S/N ratio: > 55dB (DIN-B)
• Brake system: electronic brake
• Record weight: recommended 800g

Platter:
• Material: die cast aluminium
• Diameter: 332 mm
• Weight: approx. 1.5 kg

Tone arm:
• Type: universal, statically balanced, S-shaped
• Effective length: 230 mm
• Overhang: 15 mm
• Tracking error range: < 3°
• Offset Angle: 22°
• Stylus Pressure: 0 - 4 g
• VTA setting range: 0-6 mm
• Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
• Anti-skating range: 0 – 3 g
• Effective tone arm mass: 12.8 g (incl. headshell)

Connections:
• 1x Phono/Line Out (gold-plated), 1x GND earth connection

General:
• Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
• Power consumption: 13 W
• Dimensions: 458 x 144.6 x 354 mm
• Weight: approx. 11.7 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238928_Reloop_IM.pdf

Stabilize your records

Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

OPTIMIZED PLAYBACK OF YOUR RECORDS
This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications:
• Material: Nickel-plated aluminium
• Weight: 190g
• Diameter: 78mm
• Height: 16mm

High-tech lubricant for constant velocity

How to use Lube it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Lube it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some lube off your turntable to keep it looking clean.

Please only use Lube it for turntables like Elemental, Primary, T-Line, Essential, Debut, The Classic, Juke Box & X1/X2.
For inverted bearings like RPM Line, Xtension models and Signature Line please use Grease it.

Features:
• Helps a smooth movement
• Easy handling

Amount: 5 ml

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

FULLY AUTOMATIC HIFI-TURNTABLE

The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

The CS 429 has a fully adjustable tonearm. This provides the option to change the pickup in the future and to alter the trackingforce and anti-scating accordingly.

The internal rubber damping construction decouples the tonearm and platter from external vibrations. This very quiet platform pro-vides an excellent sound performance combined with precise, optical speed control.

DETAILS:
Plinth: Solid MDF
• MDF construction with internal vibration absorber
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• All functions can be fully automatic or manual
• Solid aluminum construction with ball-bearings
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Precise optical speed control
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 6,2 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-429_manual_V4_DE_EN.pdf

Moving Coil & Moving Magnet Phono Preamp

Squeeze every inch of detail from your record collection with our highest quality moving magnet and moving coil phono stage, with integrated headphone amp; the Duo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Duo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Preamplifier?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Duo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge turntable. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Vinyl. Just for You
Enjoy the warmth of vinyl privately thanks to Duo’s integrated headphone output. Uniquely, we integrated a 6.35mm headphone jack directly into the phono stage, so you can still enjoy your records when there’s no option to play out loud.
The integrated headphone output also means no need to turn on your amplifier just to power your headphones, resulting in a more eco-friendly listening experience.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Duo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• CARTRIDGE SUPPORT: Moving Magnet | Moving Coil
• GAIN @ 1KHZ: MM: 39dB | MC: 60dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: MM: 3.35mV | MC: 305uV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): MM: ~0.09uV | MC: ~0.08uV
• RIAA CURVE ACCURACY: +/- 0.3dB 30Hz-50Hz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): MM: >90dB | MC: >70dB
• THD+N 1KHZ (20-20KHZ BW): MM: <0.0025% | MC: <0.20%
• INPUT IMPEDANCE: MM: 47k Ohms | MC: 100 Ohms
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @ 10KHZ: MM: >85dB | MC: 75dB
• DIMENSIONS (H X W X D): 48 x 215 x 159 mm (1.9 x 8.5 x 6.2")
• WEIGHT: 0.95kg (2.1lbs)
• WHATS IN THE BOX?: Alva Duo Moving Coil & Moving Magnet Phono Preamp, User Manual, Safety Guide, Mains Lead

Moving Magnet Phono Preamplifier

Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Stage?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• GAIN @ 1KHZ: 39dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: 3.35mV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): ~0.09uV
• RIAA CURVE ACCURACY: +/- 0.65dB 30Hz-20kHz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): >90dB
• THD+N 1KHZ (20-20KHZ BW): <0.0025%
• INPUT IMPEDANCE: 47k Ohm
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @10KHZ: >85dB
• DIMENSIONS (H X W X D): 48x176x132 (1.9x6.9x5.2”)
• WEIGHT: 0.68kg/1.5lbs
• WHATS IN THE BOX: Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead

Direct Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Direct Drive – Consistent drive speed with pitch-perfect audio reproduction.
• Pre-installed High-Output MC Cartridge – Pristine musical detail, custom design. Easy setup.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
You’ve spent years curating the perfect record collection, searching for hidden gems in record shops and online – because you love music. Our shared love means that we didn’t stop with Alva TT.
We pushed on to create Alva TT V2; with a direct drive system, bespoke MC cartridge, an all-new tone-arm, and Hi-Res Bluetooth with an integrated phono stage – both now switchable.
We believe that your records deserve to sound as fantastic as they look.

King of Convenience
Alva TT V2 is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. TT V2 comes with a bespoke designed cartridge pre-installed. It connects to pretty much any audio system too, thanks to a switchable integrated phono-stage. It even works wirelessly with high quality Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva TT V2 has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect TT V2 to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MC Cartridge Pre-installed
Alva TT V2’s bespoke cartridge is ready fitted – so there’s no tricky set-up, and its sound is perfectly matched to the other components in the turntable. We designed the high-output Moving Coil (MC) cartridge with an exposed cantilever. It reduces unwanted resonance and vibration, delivers high levels of gain and outstanding musical detail during playback.

Direct Drive
Alva TT V2 has a medium-torque Direct Drive motor, like its predecessor the TT. The 8 pole, 3 phase, brushless DC motor is quartz controlled to ensure accurate turntable speed. With precision control, and silent running, Alva TT V2 achieves just 0.06% wow and flutter. This means excellent pitch stability – particularly during longer, more sustained, musical notes.

Reassuringly Solid Platter
Complimenting the direct drive motor, Alva TT V2’s platter has the feel of finely polished stone. It’s made from Polyoxymethylene, a semi-crystalline thermoplastic used in precision engineering applications, where high stiffness and dimensional stability are demanded. The weight of the platter, coupled with our medium torque direct drive motor, ensures excellent speed stability during playback of records.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva TT V2 to endure, starting with a top plate hewn from 6mm aluminium plate, and layer of EVA to absorb vibration sitting on MDF. It’s cradled in a composite chassis and weighs an impressive 10.9kg. Reassuring solid construction, with great acoustic qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva TT V2 celebrates our timeless house-style. It’s the perfect match for our best-selling CX Series hi-fi separates and shares the laser-etched brand logo with our premium Edge Series.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Direct Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.1%
• TURNTABLE PLATTER: POM (Polyoxymethylene)
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 2.2kg
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 5.5W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.25W
• DIMENSIONS (W X H X D): 435 x 139 x 368mm
• WEIGHT: 10.9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: High Output Moving Coil
• CARTRIDGE FREQUENCY RESPONSE: *+/- 1dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Aluminium
• CARTRIDGE OUTPUT LEVEL: 2mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-tt-v2

Belt Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Belt Drive – With simple electronic push button speed control.
• Pre-installed Moving Magnet Cartridge – A well-regarded choice, play records in minutes.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
There’s nothing quite like vinyl: the tactile pleasure of removing a record from its sleeve and carefully placing it on a deck is unique. We designed the original Alva TT to honour that tradition, and Alva ST to share that pleasure with more people.
With a pre-fitted cartridge –so you’ll be playing records in minutes – the belt-drive Alva ST also features switchable Hi-Res Bluetooth streaming and integrated phono stage.
Everyone should be able to enjoy the freedom Alva brings.

King of Convenience
Alva ST is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. Alva ST keeps it simple with perfectly matched cartridge pre-installed. Alva ST connects to pretty much any audio system too, as it has a switchable integrated phono-stage. It even works wirelessly with Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva ST has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect Alva ST to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MM Cartridge Pre-installed
After hours of listening, we selected an Audio Technica Moving Magnet cartridge to be ready fitted on Alva ST. With no fiddly set-up you’ll be playing records in minutes. The elliptical stylus provides a greater contact area with your records’ grooves, producing accurate tracking of information and, of course, great sounding music.

Belt Drive
Alva ST uses the proven belt-drive method, supplemented with electronic motor speed control. After connecting the belt for the first time, you won’t need to look under the platter again. Rotation speed selection is made by 2 neat electronic buttons on the ST’s aluminium top surface – so you can effortlessly switch between playing albums and singles.

Aluminium, Tuned
Alva ST’s platter is aluminium die-cast, finished by CNC to ensure a totally level and smooth surface. The 17mm high aluminium platter is finished with a 5mm rubber mat – a combination proven to reduce unwanted resonance.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva ST to do just that, with a 1mm aluminium top plate, and a layer of EVA to absorb vibration sitting on top of MDF. It’s cradled in a composite chassis and weighs 9kg. Reassuring solid, and with great sound absorption qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva ST shares our minimalist house style. It’s the perfect match for our best-selling Evo and CX Series hi-fi separates. Designed and engineered in London with the emphasis on classic timeless style.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Belt Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.12%
• TURNTABLE PLATTER: Die Cast Aluminium
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 645.3g (930.5g inc. rubber mat)
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 6W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.3W
• DIMENSIONS (W X H X D): 435 x 139 x 366.7mm
• WEIGHT: 9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: Moving Magnet
• CARTRIDGE FREQUENCY RESPONSE: +/- 0.5dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Alloy Tube
• CARTRIDGE OUTPUT LEVEL: 1.8~3.6mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-st

Uncompromised heavyweight design combined with high-end features. The big brother of our X1 sets new standards.

Real high-end features.

Azimuth & VTA - Fully adjustable
The X2 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X2 as you want it.

Pick it 2M Silver - High-end cartridge
This cartridge uses internal silver plated copper coils, which guarantees outstanding sonic results! The X2 is available with or without the Pick it 2M Silver.

2 kg Platter - Resonance free acryl
The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character.

33/45/78 RPM - High precision motor control
A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button.

New motor suspension
A good motor by itself, is already very quiet. To get the best performance out of it, we have improved the motor suspension. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt - this way the motor chassis is effectively decoupled from the main plinth for optimal performance.

The Tonearm - 9'' Carbon-Aluminium Tonearm
Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight.
Compared with its little brother the X1, the tonearm is longer - 9“ in length - and the tube has a wider diameter. The carbon/aluminium sandwhich construction results in better internal damping. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges.

Metal Feet - Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Phono Cable - Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Technical Specifications:
•Speed: 33, 45, 78 (electronic speed change)
•Principle: belt drive
•Speed variance: 33: 0.25% 45: 0.20%
•Wow & flutter: 33: 0.12% 45: 0.10%
•Signal to noise: 70 dB
•Platter: 30mm thick, 2 kg heavy acryl
•Main bearing: stainless steel/brass
•Tonearm: 9” carbon/aluminium sandwich
•Effective arm length: 230 mm
•Overhang: 18 mm
•Effective tonearm mass: 13,5g
•Tracking force range: 0 - 30mN
•Included accessories: 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
•Power consumption: 4,5 watts max / 0.3 watt standby
•Dimensions: 460 x 150 x 340 mm (WxHxD)
•Weight: 10 kg

Manual: https://www.project-audio.com/wp-content/uploads/2021/01/X2-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin Titanium with white HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Premium HiFi turntable with Ortofon 2M Blue cartridge

DESIGNED WITH PRECISION FROM THE OUTSET
The Turn X's direct-drive DC motor offers incredibly accurate and consistent speeds. The high torque ensures lightning-fast start-up times and minimal variances of just +/-0.03%. The Turn X excels when operated in full manual mode, where its electronic brake and rotary switch for smooth starting and stopping, which also doubles as a speed selector (33, 45 and 78 RPM), shine.

BALANCE PERFECTION
A solid aluminium block supports the record player's precision-machined die-cast platter. Its hefty 2.1 kg, 332 mm diameter and 22.5 mm thickness ensure smooth, even movement. The damping rubber coating on the back of the turntable and the rubber mat provide excellent isolation properties and minimise vibrations.

AUDIOPHILE TONEARM
The statically balanced S-shaped tonearm can be adjusted in height to change the cartridge's azimuth (the angle at which the needle approaches the record) and the record's vertical tracking angle (VTA). The tonearm design guarantees free and fluid movement and optimum cartridge performance.

CRYSTAL CLEAR SOUND QUALITY
The Turn X has a high-quality Ortofon 2M Blue cartridge pre-installed, ensuring excellent dynamics and sound resolution to satisfy even the most discerning audiophiles. Another highlight: The universal SME connector enables a quick and easy cartridge system change if required.

SOUND AND NOTHING BUT SOUND
The turntable's solid MDF chassis is exceptionally sturdy and robust, keeping unwanted resonances at bay from the outset. As a bonus, the Turn X is effectively decoupled thanks to the height-adjustable isolator feet.

DESIGN WITHOUT COMPROMISE
In addition to meeting the exacting demands of vinyl enthusiasts, the Reloop Turn X is a true visual showpiece. The record player's sleek design, sophisticated one-button control, and classy piano lacquer finish make it a real eye-catcher.

ATTENTION TO DETAIL
Last but not least, the Turn X features a gold-plated high-resolution phono output and a gold-plated ground connector for optimum signal transfer and corrosion resistance. Interference is reduced even further by the power switch's ultra-low noise insulation.

FEATURES:
• Quartz-controlled, premium HiFi turntable
• Super high torque, direct drive DC motor with ultra-precise rotation speed
• Extra-heavy, CNC machined 22,5 mm thick aluminium platter with rubber damping
• Quick start-up and drift-off rotation speed less than +/-0.03%
• Full manual operation with motor control-switch to select three different speeds (33, 45 and 78 RPM)
• Precision machined, extra heavy aluminium die-cast platter for a perfectly balanced rotation (305 mm diameter, 22.5 mm thick, 2.1 kg)
• Deadening rubber covering rear platter surface & special 5 mm rubber mat for optimized resonance control and damping
• Sunk-in platter cavity construction
• Static-balanced S-shaped tonearm with VTA adjustment
• Adjustable anti-skating wheel for optimal pick-up tracking
• Pre-installed Ortofon 2M Blue cartridge for excellent dynamics and sound resolution
• Universal headshell connector (SME) provides added flexibility
• Counterweight supplied supports a wide variety of cartridges
• Premium, high-resolution audio phono outputs (with separate grounding connection)
• Gold-plated, corrosion-resistant audio connections (detachable power and RCA cables)
• Built-in switching power with ultra-low noise isolation design
• Rigid construction, with extra-heavy, solid MDF wooden plinth
• Height-adjustable, shock-resistant insulator feet for effective decoupling
• Timeless design with high-gloss, black piano finish
• Accessories included: Turntable platter, dust cover, 2x dust cover hinges, balance counterweight, Phono RCA cable with grounding cable, AC power cord, rubber mat, instruction manual, Ortofon 2M Blue cartridge & headshell

TECHNICAL DATA
Turntable Section:
• Type of turntable: Direct drive, fully manual
• Drive: Quartz driven upper-torque direct drive with precision rotation
• Motor: DC Motor, 16-Pole, 3-Phase, brushless
• Rotation speeds: 33 1/3, 45 & 78 RPM
• Starting Torque: More than 4500 g/cm
• Start-up time / rpm change: Less than 0.3 sec.
• Wow and Flutter: Less than 0.1% WRMS (JIS WTD)
• S/N Ratio: More than 60dB (DIN-B)
• Breaking System: Electronic brake

Turntable Platter:
• Turntable Platter: Aluminium die-cast
• 305 mm diameter
• Weight About 2.1 kg

Tonearm Section:
• Type: Static balanced S-Shape
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle: Less than 3 degrees
• VTA Adjustment Range: 0-6 mm
• Applicable Cartridge Weight: 17 – 25 g (incl. Headshell)
• Anti-Skating Range: 0-3 g
• Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal

Cartridge:
• Type of cartridge: Ortofon 2M Blue
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 25 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 80 µm
• Compliance, dynamic, lateral: 20 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Blue
• Cartridge weight: 7.2 g

General:
• Power Supply: AC IN 100~240V, 50/60 HZ
• Power consumption: 3W
• Dimensions: 460(W) x 367.3(D) x 172.6(H) mm
• Weight: 10.35 kg
• Incl.: dust cover + 2x hinge, rubber mat, power supply cable, RCA cable with grounding connection (gold-plated), Headshell with Ortofon 2M Blue (pre-installed), turntable platter, operation manual & counterweight

MANUAL HIFI-TURNTABLE

For decades, direct-drive turntables from Dual have been renowned for their quality and reliability. The rumble free direct-drive in the CS 618Q keeps the RPM totally stable, while operating without noise or vibration.

The advanced twin gimbal precision tonearm is partnerd with an Ortofon 2M Blue pickup.

The turntable comes with an auto-stop feature that includes an automatic tonearm lift to reduce wear and tear on the needle as it moves to the end of the record.

DETAILS:
Plinth: Solid MDF
• Surface Options: Vinyl veneer, Gloss paint, Walnut veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dustcover

Platter: Aluminium Die-cast
• Heavy aluminium die-cast platter
• Heavy rubber mat for resonance damping
• Hardened steel spindle integrated into the direct-drive

Tonearm: Twin Gimbal Design
• Autostop function with an automatic tonearmlift
• Solid aluminium construction with precision pivot ball-bearing
• Adjustabel trackingforce and antiskating

Drive: Direct-drive
• Quartz stabilised, high end direct-drive
• No vibrations through coreless inductors
• Double shielded Rotormagnets to eliminate any stray magnetic fields

TECHNICAL DATA:
Drive:
• Drive: Direct-drive
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,07 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Auto-Stop / Auto Tonarmlift
• Bearing: 4 x Pivot ball-bearing /twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Blue

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 1450 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 7 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-618Q_manual_V6_DE_EN.pdf

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price.
Created with an eye for interior design the (ready to go, straight out of the box) C62 record player and speakers have a veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the design complete. You can pump up the volume because of the two great quality speakers and NP5 diamond needle.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

The THORENS TD 204 was developed for the audiophile beginner. A turntable with sound expansion potential for audiophiles.
The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.

The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9" J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.

The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.

The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.

The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.

SPECIAL FEATURES:
• Smooth running belt drive
• Thorens TP 120 9” tonearm with J shape
• Detachable headshell with SME connector
• Switchable MM phono preamplifier
• Die-cast aluminum platter
• Pre-installed Audio Technics AT95E cartridge

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raises the bar even higher.

A MILESTONE FOR THE NEXT DECADES
The Debut PRO brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.
The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality.

The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function.

DEEPLY DRIVEN
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.

A NEW PLATTER – A DEEPPER DISH
The new Debut PRO platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO has to offer!
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO.

HYBRID TONEARM
The new Debut PRO features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges!

AZIMUTH & VTA ADJUSTMENT
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

Features:
Pick it PRO
Lively and robust sound
The perfect combination of components is the key to achieve the great sound of the Pick it PRO.

Nickel Coating
Sustainable components
The nickel finish of the aluminium components results in a hard, resistant surface.

Hybrid Tonearm
Carbon Aluminium Sandwich
This super stiff and uniquely dampened tonearm ensures perfect tracking of the record groove.

VTA & Azimuth
Fully adjustable
The Debut PRO comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.

33/45/78 RPM
High precision motor control
The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.

Bearing block
Complete new design
The precision CNC milled and nickel coated tonearm bearing parts are completely new and designed just for the PRO.

Special Platter
TPE damped & anti magnetic
The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.

Metal Feet
Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Technical Specifications:
• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt drive with electronic speed control
• Platter: 300mm, die cast aluminium platter with TPE damping and felt mat
• Platter bearing: high precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
• Speed drift: 33: +/-0,40%; 45: +/-0,50%
• Signal to noise: 68dB
• Tonearm: 8,6” one-piece carbon-aluminium tonearm
• Effective arm length/mass: 218,5 mm / 10,0 g
• Overhang: 18,5mm
• Included accessories: 15V DC / 0,8A power supply, dust cover, 78 RPM round belt, 7‘‘ single adapter
• Power consumption: 4W / 0W standby
• Dimensions: 415 x 113 x 320mm (WxHxD)
• Weight: 6 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2021/07/PJ-Phono-DebutPro-Manual.pdf

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Integrated Stereo Amplifier with (Built-in) Phono-Stage

• 35 Watts Power per Channel – for detailed performance at all volumes, ideal for smaller/medium sized rooms
• Built-In Phono Stage – to plug & play a vinyl turntable
• Slim Timeless Design – classic hi-fi size, with Lunar Grey aluminium trim
• Tone Controls – fine-tune sound to compensate for room dynamics
• Digital Display – white LED, clearly shows; source, volume & menus
• Headphone Socket – full size socket for high-quality after-hours listening
• Front Aux Input – 3.5mm socket to easily connect compatible devices

Sound Comes First
Our AXA35 integrated amp offers 35 watts per channel and has a built-in moving magnet phono stage – perfect for vinyl enthusiasts. A white LED dot matrix display confirms listening source, and separate tone controls mean you can adjust the sound to suit your taste. There’s a large ¼” (6.35mm) headphone socket too, ideal for high-quality listening without disturbing those who might not share your great taste in music.

Your Journey into Sound
AXA35 is the ideal amp to begin listening to music and really appreciating it – hearing detail in familiar tunes you’ve previously missed. That’s down to the toroidal transformer it uses, a tech found higher up our range. Choose a pair of speakers to suit your taste, perhaps they’ve been in the family for years or maybe something from our SX Series.

Release the Wheels of Steel
The built-in phono stage is the ace up AXA35’s sleeve. It means that you can plug a turntable straight in without any extra kit. Moving magnet (MM) compatibility means AXA35 works with a wide variety of turntables – including that vintage one you’ve had your eye on. Soon you’ll be playing the records you’ve been saving for, and planning what to buy next.

Setting the Tone
With separate bass and treble controls, you can fine-tune AXA35’s sound to suit your taste, speakers and room dynamics. The volume level is shown on the LED dot matrix display, and with 35 watts per channel you’ll have plenty of kick for smaller to medium sized rooms.

Wired for Sound
AXA35 is a well-connected amp, with no less than 4 pairs of RCA inputs, plus a pair of phono sockets for a turntable and a pair of recording outputs. There’s a rear USB socket for technical upgrades. Hi-fi quality speaker binding posts (connectors), compatible for banana plugs, mean that thick cable connects securely for an authentic sound.

Designed for Life
As with the rest of AX Series, AXA35 shares our house-style of Lunar Grey minimalist fascia, black steel cabinet and ‘floating’ base. This timeless look enables an upgrade path through our range. A slim build, in the classic 430mm hi-fi width, also means that AXA35 can easily slot, and breathe new life, into a much-loved system.

Technical specifications:
• POWER OUTPUT: 35 Watts (into 8 Ohms)
• THD (UNWEIGHTED): <0.01% @ 1kHz, 80% of rated power <0.15% 20Hz - 20kHz, 80% of rated power
• FREQUENCY RESPONSE (-3DB): 5Hz - 50kHz
• S/N RATIO (REF 1W): >82dB (unweighted)
• INPUT IMPEDANCES: 47k ohms
• POWER AMP DAMPING FACTOR: > 50
• MAX. POWER CONSUMPTION: 260W
• BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz
• STANDBY POWER CONSUMPTION: <0.5W
• INPUTS: 4x RCA, 1x Phono, 1 x 3.5mm Aux input (front panel)
• OUTPUTS: Speakers, Rec Out, USB 5V power
• DIMENSIONS (HXWXD): 83 x 430 x 335mm (3.3 x 16.9 x 13.2”)
• WEIGHT: 5.6kg (12.3lbs)
• IN THE BOX: AXA35 Integrated Amplifier, Power Cable, Remote Control, 2 x AAA Batteries

The Jasper has sleek tapered legs and exquisite mid-century vibes. This record player delivers retro design with sound and functionality that’s 100% modern. The three-speed turntable includes all the bells and whistles: a built-in Bluetooth receiver, headphone jack, and aux input. And that deep walnut finish with gold accents? Pure perfection. With stunning dark looks and crystal-clear sound at a fantastic price, the Jasper is truly the total package.

Specifications:
• Turntable, plays 7", 10" & 12" records
• 2 built-in speakers
• Bluetooth in & Out
• Headphone Jack
• 45 RPM adapter
• Power adaptor 6V
• Aux-IN
• Np16 needle
• 4 Legs
• 38,1 cm (w), 66.6 cm (h), 35.5 cm (d)
• Weight: 6,35 kg

They say clothes make the [wo]man, but in this case, they also make the stereo. Outfitted in eye-catching heather grey fabric accented with walnut wood and silver accents, the Aria Shelf System is definitely dressed for success. The Aria is more than just a pretty face, though: the three-speed turntable boasts a built-in Bluetooth receiver, FM radio, and aux input, and the speakers deliver 2x25 watts of sound. Stunning looks and personality to match? We’re absolutely swiping right on the Aria Shelf System.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Built-in speakers | 1” 6Ω 5W x 2 + 4" 6Ω 20W x 2
• NP16 needle
• Belt-driven
• FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter output 15V 3A
• Turntable dimensions: 34,3 cm (w), 11,4 (h), 31 cm (d)
• Speaker dimensions: 16.5 cm (w), 24.7 cm (h), 18.4 cm (d)
• Weight: 7,09 kg

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

Level Gauge - Basic
High precision gauge, calibrated.

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

Level Gauge - Stainless steel
High precision gauge, calibrated.

Record clamp.
LP-clamping unit with resonance absorbing locking unit and stainless steel grip.
Weight: 190 g

Acrylic dust cover for Smart Matrix Silent.
Dimensions (W/D/H in mm): 340 x 340 x 75 (Outer dimension)

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black/silver turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

Carbon Fibre Tone Arm for the Stanton STX Portable Turntable.

Available with Black gimble.

Engineered to work with:

• 3K carbon fibre tube and aluminum head shell
• Billet aluminum gimbal with ball bearings
• Custom engineered limited bounce tension system
• Phono analogue pre-amp included
• Easy wire installation kit, including cartridge mounting screws
• Engineered to work flawlessly with: Ortofon VNL/OM, Reloop OM-GT and Shure M44-7

Please note: The JDDPTA-SX does not include a cartridge and stylus.

Why not get the tonearm with a Ortofon VNL Cartridge & Stylus?

Installation video can be found here:
https://www.youtube.com/watch?v=pQsXTqpkfjQ

Carbon Fibre Handle for your Stanton SPX!

3K weave glossy carbon fiber tube handle that can be easily installed into your Stanton SPX turntable.

Real carbon fibre
No drilling required
Easy install

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Omni Portable Turntable Tone Arm Tension Mod by Tiny Steppa

Enhance Durability. Unleash Potential.

"The tone arm tension design in the Omni is actually very simple, with the two rubber bands doing their job well. However, we're aware that rubber bands can become hard and lose elasticity over time, much like changing a platter belt after a long while. This modification gives you an option to enhance durability, and elevate Omni's potential."

Easy stylus weight adjustment: Fine-tune the stylus weight with your fingertips.
Tone arm protection: Nylon screws prevent tonearm coating damage during setup.
Simple installation: Quick and user-friendly assembly.
Tool kit included: All necessary tools are in the package.
Omni certified: Meets quality and compatibility standards.

Installation video can be found here:
https://www.youtube.com/watch?v=ctHskU8k67c

Watch the adjustment video here:
https://www.youtube.com/watch?v=TDKhq1hTC3s

Now with 2-way Bluetooth!

The Bluetooth Voyager briefcase design record player stands out because of the sleek grill at the front where the two speakers are behind, waiting for you to turn up the volume. Get the best use out of your record player with the 2-way Bluetooth receiver. Use the Voyager as a Bluetooth speaker and listen daily to your digital music, or connect an external Bluetooth speaker for an amplified sound. The Voyager record player also comes with Pitch Control, Aux-in, Headphone jack and RCA output.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3 ¾”, 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Expert 12 in 1 turntable care kit - A must-have accessory

The Lenco TTA-12IN1PRO is an aluminium suitcase containing all necessary accessories for taking care of your turntable and records collection.

The contents:
A record anti-static brush to clean your records, a stylus force scale to check the pressure of the stylus on the record, a cartridge azimuth and VTA protractor and a cartridge alignment protractor to make sure that your cartridge is perfectly aligned for the best sound performance.
4 small level gauges and a bigger level gauge to make sure that your turntable is perfectly horizontal.
In case you want to change your cartridge you will find pliers, 4 cartridge wires, 12 cartridge screws and a small screw driver.
To keep the stylus clean we provide a stylus brush.
Plus gauge & 45rpm adapter.

Included : Record anti-static brush, Stylus force scale, Cartridge azimuth and VTA protractor, Cartridge alignment protractor, 4 small level gauges, Pliers, 4 cartridge wires, 12 cartridge screws, Screw driver, Stylus brush, Big level gauge, 45rpm adapter

UNCOMPLICATED WITH COMFORT
The CS 529 combines ease of use of a fully automatic turntable with high-end solutions such as precision pivot ball-bearings in a twin gimbal tonearm.

The operation is just as straight forward as every automatic turntable; the tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

All turntable functions can be controlled via the terminal or remotely operated via the Bluetooth signal, which also transmits the music data. The relevant app can be installed on any smart device to enable you to control the entire turntable remotely. This is the first product world-wide with such a feature.

DETAILS:
Plinth: Solid MDF
• Subchassis construction with rubber dampers
• Bluetooth for audio and remote-control functions
Platter: Aluminium
• Aluminium die-cast, long term precision
• Heavy rubber mat for resonance damping
• Hardened steel spindle in a brass bushing
Tonearm: Twin Gimbal Design
• All functions are fully automatic or manual
• Solid aluminium gimbal construction
• Pivot ball-bearings
Drive: DC- Motor / Belt
• Optical speed control at the motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Bluetooth Remote Control / Automatic
• Bearing: 4 x ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g bis 4 g
• Cartridge Weight Range: 5 g bis 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: Bluetooth Bluetooth 5.2 aptXT HD Audio.
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: D: 415 mm / H: 400 mm
• Weight: 6,7 kg
• Power plug AC / DC: External power supply

Ortofon Record Stabilizer Heavy - Black - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record Stabilizer Heavy - Silver - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.