Turntables 166 Items

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

New motor, developed exclusively for direct-drive turntables

The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.

Knife-edge, pivot-point tonearm bearings

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).

Precision anti-skating and stylus-pressure adjustment

As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.

Pre-installed Oyster cartridge by SUMIKO

The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.

Built-in PHONO EQ amplifier supporting MM cartridges

The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.

Die-cast aluminium platter

In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.

Insulating feet with excellent shock absorption

The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.

2-speed turntable for 33-⅓ and 45 rpm

The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Features at a glance:
• Direct-drive analog turntable
• Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
• Die-cast aluminium platter
• Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
• Multi-layer piano black or natural walnut veneer finish
• Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
• Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
• 2-speed drive offering 33-⅓ and 45 rpm
• Gold-plated oxidation-resistant output connectors
• Oyster MM cartridge by SUMIKO
• Shock-absorbing insulating feet
• GND terminal
• RoHS compliant
• Included Accessories
• Felt Mat
• EP Adapter
• Counter Weight
• Head-shell (SUMIKO Oyster installed)
• Platter
• Dust Cover
• Hinges × 2
• RCA Audio cable with GND terminal
• AC Adapter (GPE036W-24015)
• Owner's Manual (including Warranty Card)

TURNTABLE FEATURES
• Type: Manual
• Drive method: Direct-drive
• Speed: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1%
• Built-in preamp: Yes
• S/N ratio: 67dB
• Cartridge: SUMIKO Oyster
• Cartridge type: MM
• Cartridge output: 4.0mV (1kHz)
• Tracking force: 2.3g
• Cartridge weight: 5.3g
• Including headshell: 15.3g
• Rec. cartridge weight: 4-13g
• Rec. cartridge weight (incl. headshell): 14-23g

AUDIO OUTPUTS
• Output level & impedance phono (MM): 4.0mV (1kHz)
• RCA: 1
• Output level & impedance RCA: 224mV (–13dBV)

ENERGY MANAGEMENT
• Power consumption (standby): 0.5W
• Power consumption: 2W
• AC adapter power
- Input: AC 100 V – AC 240 V, 50/60 Hz
- Output: DC 24 V, 1500 mA

DIMENSIONS AND WEIGHT
• Product height: 11.7cm
• Product width: 42cm
• Product length: 35.6cm
• Product weight: 6.1kg
• Packsize height: 24cm
• Packsize width: 52.5cm
• Packsize length: 43.8cm

Go to Item

Teac

TN-4D-SE

499,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-08-09

Go to Item

T1 BT (Ortofon OM 5E)

474,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

Go to Item

T1 BT (Ortofon OM 5E)

474,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

T1 BT (Ortofon OM 5E)

474,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features
•Belt-driven
•Built-in phono stage and Bluetooth for wireless use
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Satin White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed: 33,45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.7% 45: 0.6%
•Wow & Flutter: 33: 0.25% 45: 0.23%
•Platter Heavy: 8mm, blasted-glass platter with felt mat
•Main bearing: Stainless steel/brass
•Signal to noise: 65dB
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 5 - 10g (pre-mounted)
•Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
•Outputs: RCA Line, RCA Phono, Bluetooth
•Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
•Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
•Power consumption: 3 Watt max
•Dimensions: 415x100x335 mm (WxHxD)
•Weight: 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/T1_T1_Phono_SB_T1_BT_Manual.pdf

Go to Item

AT-LP140XP

469,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

Go to Item

Ground it deluxe 1

449,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Equipment base

Ground it deluxe 1 suitable for:
• Xtension 9 Evolution, Xtension 10 Evolution, Xtension 12 Evolution
• Signature 10
• RPM 1 Carbon, RPM 3 Carbon, RPM 5 Carbon, RPM 9 Carbon, RPM 10 Carbon

Features:
• Resonance free placement for turntables & hifi
• Heavy weight base filled with granular damping
• 2 models with adjustable spikes (3 or 4 may be fitted)
• 1 model with height adjustable magnetic feet
• Dark grey piano lacquer finish
• Matches charcoal finish of Pro-Ject turntables

Technical Specifications:
• Dimensions: 500 x 65 (45)x 400 mm incl spikes (without spikes)
• Weight: 11,6 kg

Go to Item

AT-LP140XP

449,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Cambridge Audio

AXA35

429,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Integrated Stereo Amplifier with (Built-in) Phono-Stage

• 35 Watts Power per Channel – for detailed performance at all volumes, ideal for smaller/medium sized rooms
• Built-In Phono Stage – to plug & play a vinyl turntable
• Slim Timeless Design – classic hi-fi size, with Lunar Grey aluminium trim
• Tone Controls – fine-tune sound to compensate for room dynamics
• Digital Display – white LED, clearly shows; source, volume & menus
• Headphone Socket – full size socket for high-quality after-hours listening
• Front Aux Input – 3.5mm socket to easily connect compatible devices

Sound Comes First
Our AXA35 integrated amp offers 35 watts per channel and has a built-in moving magnet phono stage – perfect for vinyl enthusiasts. A white LED dot matrix display confirms listening source, and separate tone controls mean you can adjust the sound to suit your taste. There’s a large ¼” (6.35mm) headphone socket too, ideal for high-quality listening without disturbing those who might not share your great taste in music.

Your Journey into Sound
AXA35 is the ideal amp to begin listening to music and really appreciating it – hearing detail in familiar tunes you’ve previously missed. That’s down to the toroidal transformer it uses, a tech found higher up our range. Choose a pair of speakers to suit your taste, perhaps they’ve been in the family for years or maybe something from our SX Series.

Release the Wheels of Steel
The built-in phono stage is the ace up AXA35’s sleeve. It means that you can plug a turntable straight in without any extra kit. Moving magnet (MM) compatibility means AXA35 works with a wide variety of turntables – including that vintage one you’ve had your eye on. Soon you’ll be playing the records you’ve been saving for, and planning what to buy next.

Setting the Tone
With separate bass and treble controls, you can fine-tune AXA35’s sound to suit your taste, speakers and room dynamics. The volume level is shown on the LED dot matrix display, and with 35 watts per channel you’ll have plenty of kick for smaller to medium sized rooms.

Wired for Sound
AXA35 is a well-connected amp, with no less than 4 pairs of RCA inputs, plus a pair of phono sockets for a turntable and a pair of recording outputs. There’s a rear USB socket for technical upgrades. Hi-fi quality speaker binding posts (connectors), compatible for banana plugs, mean that thick cable connects securely for an authentic sound.

Designed for Life
As with the rest of AX Series, AXA35 shares our house-style of Lunar Grey minimalist fascia, black steel cabinet and ‘floating’ base. This timeless look enables an upgrade path through our range. A slim build, in the classic 430mm hi-fi width, also means that AXA35 can easily slot, and breathe new life, into a much-loved system.

Technical specifications:
• POWER OUTPUT: 35 Watts (into 8 Ohms)
• THD (UNWEIGHTED): <0.01% @ 1kHz, 80% of rated power <0.15% 20Hz - 20kHz, 80% of rated power
• FREQUENCY RESPONSE (-3DB): 5Hz - 50kHz
• S/N RATIO (REF 1W): >82dB (unweighted)
• INPUT IMPEDANCES: 47k ohms
• POWER AMP DAMPING FACTOR: > 50
• MAX. POWER CONSUMPTION: 260W
• BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz
• STANDBY POWER CONSUMPTION: <0.5W
• INPUTS: 4x RCA, 1x Phono, 1 x 3.5mm Aux input (front panel)
• OUTPUTS: Speakers, Rec Out, USB 5V power
• DIMENSIONS (HXWXD): 83 x 430 x 335mm (3.3 x 16.9 x 13.2”)
• WEIGHT: 5.6kg (12.3lbs)
• IN THE BOX: AXA35 Integrated Amplifier, Power Cable, Remote Control, 2 x AAA Batteries

Go to Item

T1 Phono SB (Ortofon OM 5E)

426,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-10-18

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Go to Item

T1 Phono SB (Ortofon OM 5E)

426,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

TD 201

404,10 €* 449,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.

SPECIAL FEATURES
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

TD 201 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT3600)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 3.5g +/–0.5g
• Cartridge Weight 5g +/–0.5g
• Head-shell Weight 10g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 121 x 360 mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/201/TD201-User-Guide.pdf

Go to Item

E1 BT (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 BT (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 BT (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Elac

Miracord 50

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

Go to Item

Pioneer DJ

PLX-500

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

Go to Item

Pioneer DJ

PLX-500

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Dual

CS 329

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

Go to Item

AT-LP5X

379,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP5X
Fully Manual Direct Drive Turntable
Building on Audio-Technica’s analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.

The LP5x retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and ’70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.

Direct-drive, low noise motor
Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM
AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus
Lightweight AT-HS6 headshell
J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input
Anti-resonance, die-cast aluminum platter
Heavy rubber damping mat for improved low-frequency reproduction
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Elegant matte black finish
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable
Included dust cover and mounting hardware

Specifications

Drive Method Direct Drive
Type 3-speed, fully manual operation
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum
Starting Torque >1.0 kgf.cm
Braking System Electronic brake
Wow and Flutter <0.2% WRMS (33 RPM) at 3 KHz
Signal-to-Noise Ratio >50 dB
Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE 250 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized MC: 56dB nominal, RIAA equalized
USB Function A/D, - 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface - USB 2.0 compliant Windows 7 or above, MAC OS X or above
Power Supply Requirements 100-240V AC, 50/60 Hz
Power Consumption 3 W
Dimensions 450.0 mm (17.72") W x 352.0 mm (13.86")D x 157.0 mm (6.18")H
Weight 7.3 kg (16.1 lbs.)
Accessories Included AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus; AT-HS6 lightweight headshell; AC adapter ; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; dust cover with hinges.

Manual: https://eu.audio-technica.com/resources/AT-LP5X_UM_162501850_V1_EN_web_190927.pdf

Go to Item

AT-LP120XBT

369,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This fully manual turntable is modeled after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.

Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.

The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

High-fidelity audio with Bluetooth® wireless technology

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable

Compatible with the high-quality Qualcomm® aptX™ audio codec

Built-in switchable phono preamplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor DC servo motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminum
Anlaufmoment >1.0 kgf.cm
Bremssystem Electronic brake
Gleichlaufschwankung <0.2% (WTD) @ 3 kHz (JIS)
Rauschabstand >50 dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
Phono-Vorverstärkung 36 dB nominal, RIAA equalized
USB-Funktionen A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above
Betriebsspannung 100 to 240 V, 50/60 Hz, 1.5A Max
Power Consumption 2.75 W
Abmessungen 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Gewicht 8 kg (17.6 lbs.), without dust cover
Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
Tonearm Type Balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5 mm
Overhang 16 mm
Tracking Error Angle Less than 3 degrees
Applicable Cartridge Weight 3.5-8.5 g
Anti-skating Range 0-4 g
Replacement Stylus AT-VMN95E
Communication System Bluetooth Version 5.0
Maximum Communication Range Line of sight - approx. 10 m (33')
Compatible Bluetooth Profile A2DP
Support Codec SBC, Qualcomm® aptX™ audio

Manual: https://www.audio-technica.com/media/wysiwyg/product/pdfs/eu/AT-LP120XBT-USB_UM_162501910_V2_EN_web_200826.pdf

Go to Item

RP-4000 MK2

369,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-09-27

•Quartz-driven DJ turntable with high-torque direct drive
•Powerful motor with more than 1.8 kg/cm torque
•Redesigned metal top panel, tactile buttons and reinforced housing construction

FEATURES
•NEW in the MK2 version:
•Newly developed top panel and reinforced housing construction
•Reworked metallic buttons with improved feel & tactile response
•Precision Pitch with selectable ranges of +/-8 % & +/-16 %
•Tempo reset (Quartz Lock) feature
•Superior finish in deep black metallic
•Quartz-driven DJ turntable with high-torque direct drive
•Designed for professional use
•Powerful brushless DC motor with more than 1.8 kg/cm torque
•Precise motor control with 3 speeds selectable (33 1/3, 45 & 78 rpm)
•Reverse function: switch for forward/reverse playback
•Precision-engineered die-cast aluminium platter with stable rotation
•Statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•Extendible needle illumination
•Shock-absorbing feet for vibration isolation
•Sturdy, heavy construction with optimized damping features
•Prepared for dust cover (available as optional accessory)
•Incl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, instruction manual

TECHNICAL DATA

Turntable:
•Type: direct drive turntable
•Drive: quartz-driven high-torque direct drive
•Motor: 8-pol., 3-phase, brushless DC motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 rpm)
•Starting torque: > 1.8 kg/cm
•Brake time: < 1 sec.
•Start-up / rpm change: < 1 sec.
•Wow and flutter: < 0.2 % WRMS
•Signal-to-noise ratio: > 50 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: aluminium die-cast
•Diameter: 332 mm

Tone arm:
•Type: universal, statically balanced, s-shaped
•Effective length: 230.5 mm
•Overhang: 16 mm
•Tracking angle error: < 3°
•Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)
•Anti-skating range: 0 – 7 g

Connections:
•1x PHONO out (gold-plated), 1x GND

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 12 W
•Dimensions: 450 (w) x 352 (d) x 144 (h) mm
•Weight: appr. 9.8 kg

Go to Item

MM-008 ADC

359,10 €* 399,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

T1 (Ortofon OM 5E)

350,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Go to Item

T1 (Ortofon OM 5E)

350,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:

T1 with Ortofon OM 5E cartridge
Directly soldered Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Belt-driven
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Included accessories dustcover, feltmat
Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
Power consumption 3 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-Manual.pdf

Go to Item

T1 (Ortofon OM 5E)

350,00 €*

Duo (MC- & MM-Phono-Vorverstärker)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed: 33,45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.7% 45: 0.6%
•Wow & Flutter: 33: 0.25% 45: 0.23%
•Platter: Heavy 8mm, blasted-glass platter with felt mat
•Main bearing: Stainless steel/brass
•Signal to noise: 65dB
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 5 - 10g (pre-mounted)
•Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories: dustcover, feltmat
•Built-in Power Supply: 230V 50Hz (US: 110V 60Hz)
•Power consumption: 3 Watt max
•Dimensions: 415x100x335 mm (WxHxD)
•Weight: 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Go to Item

Cambridge Audio

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moving Coil & Moving Magnet Phono Preamp

Squeeze every inch of detail from your record collection with our highest quality moving magnet and moving coil phono stage, with integrated headphone amp; the Duo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Duo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Preamplifier?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Duo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge turntable. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Vinyl. Just for You
Enjoy the warmth of vinyl privately thanks to Duo’s integrated headphone output. Uniquely, we integrated a 6.35mm headphone jack directly into the phono stage, so you can still enjoy your records when there’s no option to play out loud.
The integrated headphone output also means no need to turn on your amplifier just to power your headphones, resulting in a more eco-friendly listening experience.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Duo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• CARTRIDGE SUPPORT: Moving Magnet | Moving Coil
• GAIN @ 1KHZ: MM: 39dB | MC: 60dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: MM: 3.35mV | MC: 305uV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): MM: ~0.09uV | MC: ~0.08uV
• RIAA CURVE ACCURACY: +/- 0.3dB 30Hz-50Hz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): MM: >90dB | MC: >70dB
• THD+N 1KHZ (20-20KHZ BW): MM: <0.0025% | MC: <0.20%
• INPUT IMPEDANCE: MM: 47k Ohms | MC: 100 Ohms
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @ 10KHZ: MM: >85dB | MC: 75dB
• DIMENSIONS (H X W X D): 48 x 215 x 159 mm (1.9 x 8.5 x 6.2")
• WEIGHT: 0.95kg (2.1lbs)
• WHATS IN THE BOX?: Alva Duo Moving Coil & Moving Magnet Phono Preamp, User Manual, Safety Guide, Mains Lead

Go to Item

RP-2000 USB MK2

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LPW50PB

339,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-08-16

Fully Manual Belt-Drive Turntable
•Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Motor with speed-sensor system to maintain accurate platter rotation speed
•Adjustable dynamic anti-skate control
•High-isolation, height-adjustable feet
•Professional anti-resonance, die-cast aluminum platter with rubber mat
•AT-HS4 ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Adjustable dynamic anti-skate control
•AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
•Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
•High-isolation, height-adjustable feet
•AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Drive Method: Belt-Drive
Type: 2-speed, fully manual operation
Motor: DC servo with Active Speed Stabilization
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Signal-to-Noise Ratio: > 60 dB
Output Level: Pre-amp: "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements: 100 to 240 V, 50/60 Hz
Power Consumption: 220 V 50 Hz
Working: 1.3 W
Motor off: 1.1 W
Power off: 0.1 W
Dimensions: With dust cover 126.0 x 420.0 x 340.0 (H x W x D mm) Without dustcover and hinges:114.0 x 420.0 x 340.0 (H x W x D mm)
Weight: 4.81 kg (without dustcover)
Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus in black
• Detachable RCA output cable (dual RCA male to dual RCA male)
• Platter
• AC adapter
• 45 RPM adapter
• Counterweight
• Turntable mat
• Removable hinged dust cover

Manual: https://www.audio-technica.com/cms/resource_library/literature/e89c31b269914a97/at_lpw50pb_um_162502020_v1_en_web_191220.pdf

Go to Item

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Primary E Phono (Ortofon OM)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

Go to Item

AT-LP120X

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-09-13

AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q

Go to Item

RP-2000 MK2

319,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

•Quartz-driven DJ turntable with direct drive motor
•Reinforced construction with optimized damping features
•Redesigned metal top panel and tactile buttons

FEATURES
•NEW in the MK2 version:
•Newly developed top panel and reinforced housing construction
•Reworked metallic buttons with improved feel & tactile response
•Precision Pitch with selectable ranges of +/-8 %
•Superior finish in deep black metallic
•Quartz-driven DJ turntable with direct drive
•Perfect for beginners
•Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
•Precision-engineered, die-cast aluminium platter with stable rotation
•Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
•Universal connection for pick-up systems (SME)
•Extendible needle illumination
•Shock-absorbing feet for vibration isolation
•Sturdy, heavy construction with optimized damping features
•Prepared for dust cover (available as optional accessory)
•Incl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, operating instruction manual

TECHNICAL DATA

Turntable:
•Type: direct drive turntable
•Drive: quarz-driven direct drive
•Motor: 8-pol., 2-phase, brushless DC motor
•Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
•Starting torque: > 1kg/cm
•Brake time: < 1 sec.
•Start-up / rpm change: < 1 sec.
•Wow and flutter: < 0.15% WRMS
•Signal-to-noise ratio: > 50 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: aluminium die-cast
•Diameter: 332 mm

Tone arm:
•Type: universal, statically balanced, s-shaped
•Effective length: 230.5 mm
•Overhang: 16 mm
•Tracking angle error: < 3°
•Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)
•Anti-skating range: 0 - 7 g

Connections:
•1x PHONO out (gold-plated), 1x GND

General:
•Power supply: AC 115/230 V, 60/50 Hz (US/EU)
•Power consumption: 13 W
•Dimensions: 450 (w) x 352 (d) x 144 (h) mm
•Weight: appr. 6.75 kg

Go to Item

Turn 2

319,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Analogue HiFi Turntable for Audio Purists

The TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.

Smooth belt drive & low-noise DC motor

The precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.

Static balanced, straight tone arm with optimal tracking performance

The TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.

Flexible Headshell Connection

The headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.

Classy, matt slimline housing with high-quality terminal

Alongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.

FEATURES
•Belt-driven Hi-Fi turntable
•Factory fitted with Ortofon OM10 cartridge
•New straight tonearm design with optimal tracking performance
•Manual arm lift
•Low vibration DC motor
•Integrated motor control with Speed-Switch for conveniently selecting
two different speeds 33 / 45 rpm
•External DC power supply
•Die-cast Aluminum Platter with chrome edging
•Anti-Skating Wheel-System
•Gold-plated, corrosion resistant connections (all cables detachable)
•Slim-line wooden Plinth with mat black finish
•Convenient power switch at the side bottom
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

TECHNICAL DATA

Turntable Section:
•Type: Belt-Driven Analogue Turntable System
•Drive: Belt drive
•Motor: DC Motor
•Turntable Speeds: 2 speeds (33 1/3, 45)
•Wow and flutter: 0.2% WRMS
•S/N Ratio: >65 dB (a-weight)

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 300 mm
•Weight: 550 g

Tonearm Section:
•Type: Static Balanced Straight Tonearm
•Effective Length: 224 mm
•Overhang: 19 mm
•Tracking Error Angle: 25°
•Tracking Force: 1.5 g
•Applicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)
•Anti-Skating Range: 0 – 3 g

Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:
•Power supply: DC 12 V, 500 mA
•Power Consumption: 6 W
•Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
Weight: Approx. 4.6 kg

Included Accessories:
Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

Go to Item

Stanton

STX

309,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

STANTON STX
LIMITED EDITION PORTABLE SCRATCH TURNTABLE
RAZOR SHARP CUTS, RIGHT AWAY

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivaled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

SCRATCH WHENEVER, WHEREVER
Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use.
The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB-C input. For extended scratch sessions, the USB-C input can also be used with external power sources for even more cutting time.
To top everything off (literally), the latching lid also functions as a stackable, latching base, to bring the STX to standard turntable height.

WELL-CONNECTED FOR CREATORS
Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8” stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

PERFORMANCE READY
The modification culture is alive and well in the portablism world. Since the inception of this art form, we’ve seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Technical Specifications
Connections (1) RCA line-level output (stereo pair)
(1) 1/4” (6.35 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recordings

Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power (2) 3.7V Li-ion batteries

Dimensions
(width x depth x height)
13.0” x 13.0” x 4.0” (3.25” without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)

Weight 5.3 lbs.
2.4 kg

Go to Item

AT-LPW40WN

309,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Smart Styling - Combining Audio and Aesthetics:
The LPW40WN was designed to give you optimal high-fidelity audio reproduction with smart styling.

Optimal High-fidelity Audio Reproduction - Stylish Wood Turntable:
A stunning addition to any system, the AT-LPW40WN features an anti-resonance plinth with simulated walnut wood veneer to limit low-frequency acoustic feedback.

Features:
• Plays 33-1/3 and 45 RPM Records with Speed Control
• Built-in Switchable Phono Pre-amplifier
• Straight Carbon-fiber Tonearm
• AT-VM95E Dual Magnet™ Phono Cartridge
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Fully manual operation
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
• AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Specifications:
• Type: 2-speed, fully manual operation
• Motor: DC servo motor w/speed stability control
• Drive Method: Belt-drive
• Speeds: 33-1/3 RPM, 45 RPM
• Wow and Flutter: < 0.15 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio: > 60 dB
• Output Level: Pre-amp: ""PHONO"": 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level: Pre-amp ""LINE"": 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
• Power Supply Requirements: 100 to 240 V, 50/60 Hz
• Dimensions: 117 x 420 x 340 (H x W x D mm)
• Weight: 5.0 kg

Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus
• Detachable RCA output cable (dual RCA male to dual RCA male)
• AC adapter
• 45 RPM adapter
• Counterweight
• Rubber mat

Go to Item

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Gemini

TT-4000

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Gemini TT-4000 High Torque direct drive turntable features a redesigned chassis with reinforced cabinet construction. The TT-4000 uses a precision-machined die-cast aluminum platter for a stable stand in the club. The shock-absorbing rubber feet absorb shock or vibration during operation.

It is ideal for DJs, audiophiles and casual listeners alike. The 16-pole brushless 3-phase DC motor drives the TT-4000's direct drive. The turntable features precise pitch control of +/- 10%. A statically balanced S-shaped tonearm features a hydraulic lift and anti-skate mechanism.

For those who want to digitize their record collection, the Gemini TT-4000 offers a USB port for connection to PC/Mac. This way you can easily record and digitize your vinyl albums.

Thanks to a built-in phono preamp that allows for a line-level output, the TT-4000 does not require grounding.

Features:
• Direct drive turntable with very powerful torque
• Ideal for DJing, listening to music or digitizing
• USB port for connection to PC/Mac
• Very strong torque of 4.5 kg/cm
• Balanced tonearm in S-shape
• Damped rubber feet absorb shocks and vibrations
• Phono preamp with line output built in - no grounding required
• Pitch control of +/- 10%

Technical data:
• Direct driven DC motor with high torque (4.5 kg/cm)
• Signal-to-noise ratio: 40 dB
• Turntable weight: 523 g
• Pitch adjustment: +/- 10%
• Audio interface: USB 2.0 | sampling rate: 48k, 44.1k, 16 bit
• Power consumption: approx. 5.5 W
• Power supply: AC 115V - 60Hz | 230V - 50Hz
• Weight: 6.35 kg
• Dimensions (W x D x H): 490 x 315 x 262 mm

Scope of delivery:
• Gemini TT-4000 Turntable
• Power cable
• RCA cable
• Headshell with pickup/stylus
• Slipmat
• 45 adapters
• User manual & warranty information
• Audacity Software CD V2.1.3

Go to Item

MM-008

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon

SB-2 Stroboscope

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon SB-2 Stroboscope
Ortofon SB-2 stroboscope and matching light source is essential for anyone with a turntable to precisely tune the speed of the turntable's rotation for listening to vinyl and can be used with any turntable where you can adjust the speed, including by way of moving an external motor or with a speed box that allows for fine tuning.

This fine tuning kit comes with a stroboscope record and light source. Simply place the stroboscope record on your turntable, turn on the motor and fine tune the speed whilst shining the light source onto the stroboscope record for an indication of when speed is correct. Includes rings for setting of both for 33 rpm and 45 rpm speeds and a switch for testing speed on either 50 Hz or 60 Hz motors.

As speed is a critical factor in getting the best sound from your vinyl, this is an essential analogue accessory.

Technical data
Dimension - 67 mm (W) x 68 mm (L) x 22 mm (H)
Weight - 130g (with battery)
Disc dimension - 100 mm (dia) x 1.0 mm (t)
Disc material - Stainless steel
Revolutions synchronised - 78 rpm, 45 rpm, 33-1/3rpm
Housing material - Aluminum extrusion
Battery - 2 x 1.5V (UM4)
Accuracy of oscillation circuitry - 1/100 Hz , (0.1%)

Go to Item

AT-LP120X

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

L-3810GY

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Primary E Phono (Ortofon OM)

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

Go to Item

AT-LP3XBT

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-08-09

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Go to Item

Cover it 1

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dust protection cover

Cover it 1 is a crystal clear acrylic cover for turntables. It protects the turntable & its needle and suits for:
• Ground it deluxe 1
• Ground it deluxe 3
• Ground it Carbon

Turntables:
• Signature 10
• RPM 10 Carbon
• and all smaller Turntables

Technical Specifications:
• Dimensions (WHD): 525 x 290 x 425 mm (Outside)
• Dimensions (WHD): 515 x 285 x 415 mm (Inside)
• Weight 4.3 kg

Go to Item

Align it - Einstelllehre für Tonabnehmer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cartridge alignment tool

• Tool for cartridge alignment and adjustment
• Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
• Adaptable to accommodate differing tonearm lengths
• Also suitable for other manufacturers’ tonearms
• Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length

Go to Item

L-3809ME

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

Go to Item

L-3809BK

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

C62 Turntable + Speaker

274,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price.
Created with an eye for interior design the (ready to go, straight out of the box) C62 record player and speakers have a veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the design complete. You can pump up the volume because of the two great quality speakers and NP5 diamond needle.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

Go to Item

C62 Turntable + Speaker

274,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price. Created with an eye for interior design this record player and speakers have a Walnut or Grey veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the upgrade complete.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

Go to Item

L-3808

269,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

Go to Item

AT-LPW30TK

269,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LPW30TK
Manual Belt-Drive Wood Base Turntable

• Teak effect wood veneer finish
• Connect directly to speakers at home with the built-in phono preamplifier
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge

Video: https://www.youtube.com/watch?v=gmWsctJ8Kzk

Go to Item

Rhapsody

249,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Spend a night listening to a rock opera on vinyl or one of the three other listening options the Rhapsody has to offer. This entertainment center comes equipped with a 3-speed turntable, CD player, AM/FM radio, and a built-in Bluetooth receiver so you can kick back and listen to your music however you’d like! The wood cabinet adds an elegant touch and features a matching lid with metal hinges to help keep dust out while not in use. Built-in stereo speakers sit behind a vintage-inspired fabric grill. With aesthetics inspired by vintage radios and elevated with golden accents, this piece will look like a piece of art on your shelf.

• 3-speed record player (33 1/3, 45 & 78 RPM)
• Plays 7”, 10” or 12” records
• 2 Built-in full-range stereo speakers | 3.5”, 8Ω, 5W
• Built-in Bluetooth Receiver
• NP6 needle
• Belt-driven
• Pitch Control
• Headphone Jack
• Cueing Lever
• CD Player
• AM/FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter

Dimensions: 35,3 cm (w), 17,8 cm (h), 43,21 cm (d)
Weight: 5.9 kg

Go to Item

LS-300

239,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W

Go to Item

LS-300

239,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

LS-430

229,99 €*

Solo (MM Phono-Vorverstärker)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

Go to Item

Cambridge Audio

229,00 €*

Vinylmaster Advance Staubschutzhaube

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moving Magnet Phono Preamplifier

Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Stage?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• GAIN @ 1KHZ: 39dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: 3.35mV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): ~0.09uV
• RIAA CURVE ACCURACY: +/- 0.65dB 30Hz-20kHz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): >90dB
• THD+N 1KHZ (20-20KHZ BW): <0.0025%
• INPUT IMPEDANCE: 47k Ohm
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @10KHZ: >85dB
• DIMENSIONS (H X W X D): 48x176x132 (1.9x6.9x5.2”)
• WEIGHT: 0.68kg/1.5lbs
• WHATS IN THE BOX: Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead

Go to Item

NESSIE

225,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Gig Turntable + Speaker

219,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This neat record player with a wooden look will easily blend into any kind of interior. The Crosley Gig will be the centre piece in the room, but it’s still modest enough to leave space for the rest.
Round out your mid-century modern decor with functional art from Crosley. Inspired by furniture from the 50s and early 60s, the Gig’s minimalistic design features sleek rounded edges and a faux wood finish with a matte black front face for contrast. Three knobs on the front allow you to easily crank up the volume, adjust pitch, switch between vinyl, aux-in or the built-in Bluetooth receiver, letting you play digital music through the record player. Use the matching speakers or the RCA outputs on the back to easily integrate into your existing music system. The Gig is a complete two-speed turntable system that’s ready to jam right out of the box.

• 2-speed record player (33 1/3 & 45 RPM)
• Plays 7”, 10” or 12” records
• 2 external full-range stereo speakers - 3”, 8Ω, 5W
• Built-in Bluetooth Receiver
• Pre-Mounted Moving Magnet Cartridge
• NP5 diamond needle
• Belt-driven
• Adjustable Pitch Control
• Bluetooth input
• Aux in
• RCA out
• AC power adapter (EU & UK PLUG)
• Dimensions: 43 cm (l), 28 cm (w), 10 cm (h) | Speakers: 18 cm (l), 10 cm (w), 10 cm (l)
• Weight: 5.8 kg

Go to Item

LBT-188WA

219,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PROS
•Modern turntable
•Bluetooth
•33 or 45 RPM

PRODUCT INFORMATION
•The Lenco LBT-188 is a turntable with Bluetooth functionality. Connecting this turntable to your Bluetooth speaker is child’s play. The ideal set-up for enjoying a full and warm sound while lounging on your couch at home. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your vinyl record at the right speed.

•The LBT-188 from Lenco features a metal turntable, belt drive, an RCA connection and a tone arm with a counterweight. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it against knocks. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003117
•Product height: 12.40 cm
•Product depth: 34.40 cm
•Product width: 41.70 cm
•Number of RCA outputs: 2
•12V car: Yes
•Power option: Power on/off switch
•USB connectors: USB A
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902041139
•Amplifier options: Includes (pre) amplifier
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 5 W

Go to Item

LBT-188

214,99 €*

Numark x Jesse Dean Designs

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

PT01 Scratch x JDDX2RS-A Fader (HHV Bundle)

199,99 €*

Numark x Jesse Dean Designs

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

Go to Item

PT01 Scratch x JDDX2RS-A Fader (HHV Bundle)

199,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Little Fwend

Little Fwend N (Low)

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Concept Signature Abdeckhaube

190,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Acrylic dust cover for Concept Signature.
Dimensions (W/D/H in mm): 450 x 380 x 147 (Outer dimension)

Go to Item

Speed Light V2 + Stroboscope Speed Test Record

190,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Providing unbeatable accuracy! The Stroboscope Testrecord together with the Speed Light V2 give the best results in adjusting your turntable speed.

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord%20+%20Speedlight_E+D.pdf

Go to Item

AT-LP60XBT

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

Go to Item

AT-LP60XBT

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Smart Matrix Silent Abdeckhaube

180,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Acrylic dust cover for Smart Matrix Silent.
Dimensions (W/D/H in mm): 340 x 340 x 75 (Outer dimension)

Go to Item

Jasper Turntable

179,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Jasper has sleek tapered legs and exquisite mid-century vibes. This record player delivers retro design with sound and functionality that’s 100% modern. The three-speed turntable includes all the bells and whistles: a built-in Bluetooth receiver, headphone jack, and aux input. And that deep walnut finish with gold accents? Pure perfection. With stunning dark looks and crystal-clear sound at a fantastic price, the Jasper is truly the total package.

Specifications:
• Turntable, plays 7", 10" & 12" records
• 2 built-in speakers
• Bluetooth in & Out
• Headphone Jack
• 45 RPM adapter
• Power adaptor 6V
• Aux-IN
• Np16 needle
• 4 Legs
• 38,1 cm (w), 66.6 cm (h), 35.5 cm (d)
• Weight: 6,35 kg

Go to Item

Aria Turntable + Speaker

179,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

They say clothes make the [wo]man, but in this case, they also make the stereo. Outfitted in eye-catching heather grey fabric accented with walnut wood and silver accents, the Aria Shelf System is definitely dressed for success. The Aria is more than just a pretty face, though: the three-speed turntable boasts a built-in Bluetooth receiver, FM radio, and aux input, and the speakers deliver 2x25 watts of sound. Stunning looks and personality to match? We’re absolutely swiping right on the Aria Shelf System.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Built-in speakers | 1” 6Ω 5W x 2 + 4" 6Ω 20W x 2
• NP16 needle
• Belt-driven
• FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter output 15V 3A
• Turntable dimensions: 34,3 cm (w), 11,4 (h), 31 cm (d)
• Speaker dimensions: 16.5 cm (w), 24.7 cm (h), 18.4 cm (d)
• Weight: 7,09 kg

Go to Item

Mercury

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

Go to Item

Mercury

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Mercury

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

LBT-120

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PROS
•Modern turntable
•Bluetooth speaker connectivity
•Directly digitises vinyl to a storage medium
•Semi-automatic

PRODUCT INFORMATION
•The Lenco LBT-120BK Turntable is a semi-automatic record player with Bluetooth functionality. You can connect the record player to your Bluetooth speaker in seconds and enjoy a full and warm sound from the comfort of your couch. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your LP or single at the right speed.

•And what if you want to enjoy your favourite records while cycling or in the train? The Lenco LBT-120BK digitises all your favourite records via the built-in USB port. You can transfer the rec•ordings to a USB stick in next to no time and carry them with you in your pocket.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LBT-120BK turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tone arm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LBT-120BK is supplied with a dust cover that keeps your Lenco fresh and clean during brief periods when you are not using your turntable.

SPECIFICATIONS
•SKU: A002991
•Product height: 12.20 cm
•Product depth: 36.20 cm
•Product width: 42.20 cm
•Number of RCA outputs: 1
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902039822
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 12W

Go to Item

Teac

TN-180BT

169,00 €*

Vinylcleaner (Basic/Pro/ProPlus+) Abdeckhaube

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-08-02

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

Go to Item

NESSIE

165,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

TT-34 USB Turntable

159,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

LS-100WD

159,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ground it E

159,00 €*

DS-3 DIGITAL STYLUS PRESSURE GAUGE

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Equipment base

Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vib-rations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.

Suitable for:
• Elemental Line
• Essential Line
• Debut Line
• 1Xpression Carbon
• 1Xpression Carbon Classic
• RPM1 Carbon
• RPM3 Carbon

Features:
• Support platform for many turntables or other equipment
• Prevents the transmission of vibrations
• Heavy-weight MDF
• Conical feet with damping ring
• Height adjustable
• Combinable with Cover it E and Cover it RPM 1/3 Carbon
• High gloss piano finish

Technical Specifications:
• Dimensions: 480 x 51 x 390 mm spike feet incl.
• Weight: 4 kg

Go to Item

Ortofon

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

rtofon DS-3 - a high precision digital stylus pressure gauge
DS-3 is a new lightweight compact digital stylus pressure gauge model. The DS-3 is a miniature ultra precision non-magnetic instrument that tunes your tonearm to the highest possible degree. The DS-3 scale is factory pre-calibrated for high accuracy measurements with the tolerance of +/-0.01 g.

How to use the DS-3
• Turn on the device by pressing ON button. The display will show 0000.
• Press the UNIT button to select the measurement unit. The default setting is gram/g.
• Place the stylus on the measurement plate on the right side of the device. Display will start blinking. It will stop blinking when the measurement is completed. The value displayed on the screen is the stylus pressure.
• The display screen will automatically dim to saving mode after 5 seconds of inactivity and turn off after 60 seconds of inactivity.
• When a battery runs out, a LO indicator will flash on the screen. Then replace both batteries.
• PCS button balances count by calculating the average weight of one piece-weight called a unit weight, then applying it to the total weight of what you are trying to count. Firstly, weigh one PC, then weigh the bundle, then push the PCS button and on the display you’ll get a number of PCS.

Technical data and precautions
Sensitivity - 0.01g
Operational weight range - 0.1g to 200g
Battery - 2 × AAA
Size - (L) 120mm × (W) 60mm × (H) 17mm
Weight - 70g
LCD screen with back lighting
Auto off function
Protect the device against high temperatures, dust and humidity
Carefully lower the measurement object on the measurement plate
Operating temperature range +10⁰ - +30⁰C
Do not place objects weighting more than 200 g on the measurement plate
Do not place the device on an uneven surface, it may result in not accurate measurements

Go to Item

Speed Light V2

150,00 €*

TTW10H Turntable Weight For 12" And 7" (Heavy Weight Edition)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Quartz controlled 300 Hz light source

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Compatible with the Stroboscopic Test Record:
The clearaudio Speed Light V2 is perfectly tuned for use with our Stroboscopic Test Record.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Speed%20light%20V2_E+D.pdf

Go to Item

Varia Instruments

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The TTW10H is our turntable weight which combines two needful features for every vinyl DJ:
A disc stabilizer and an adapter for 7“ records.
The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

OUR HANDCRAFTED TURNTABLE WEIGHTS WORK EITHER FOR 12“ AND 7“ RECORDS.

Our turntable weights feature a smart mechanism: The 7“ adapter inside the weight is moveable- as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10H. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10H comes in a neat printed box with a linen bag to take it out to your gigs.

The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

STAINLESS STEEL BODY WITH A SOLID BRASS CORE.

• DIMENSIONS: Ø75mm × 33mm (Ø2.9 × 1.3 inches)
• WEIGHT: 808g (1.78 lbs)

Handmade in Switzerland

Video: https://youtu.be/e1be_0Ijhms
https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Go to Item

LS-50

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

Go to Item

L-30

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

Go to Item

Stabilizer

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Maintenance Set Premium

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Align it PRO

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Twister Plattenklemme

145,00 €*

PT01 Scratch x 7" Control Vinyl (Pair) HHV Bundle

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record clamp.
LP-clamping unit with resonance absorbing locking unit and stainless steel grip.
Weight: 190 g

Go to Item

Numark x Serato

144,00 €*