Turntables 184 Items

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

Reloop - Abdeckhaube / Dust Cover RP-7000/8000/+MK2

FEATURES
Hinged dust cover
Suitable for Reloop RP-7000/8000 MK1 and MK2
Sturdy rigid plastic cast
TECHNICAL DATA
Dimensions: 452 x 58 (75 tone arm base) x 348 mm (358 hinge seat)
Incl. mounting hinges

OFFERED IS JUST THE DUST COVER WITHOUT TURNTABLE!

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

SPECIAL FEATURES
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT-95E)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 2.0g +/–0.5g
• Cartridge Weight 5.7g +/–0.5g
• Head-shell Weight 11g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 355x 121mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/202/TD202-User-Guide.pdf

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1200MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model.

rtofon DS-3 - a high precision digital stylus pressure gauge
DS-3 is a new lightweight compact digital stylus pressure gauge model. The DS-3 is a miniature ultra precision non-magnetic instrument that tunes your tonearm to the highest possible degree. The DS-3 scale is factory pre-calibrated for high accuracy measurements with the tolerance of +/-0.01 g.

How to use the DS-3
• Turn on the device by pressing ON button. The display will show 0000.
• Press the UNIT button to select the measurement unit. The default setting is gram/g.
• Place the stylus on the measurement plate on the right side of the device. Display will start blinking. It will stop blinking when the measurement is completed. The value displayed on the screen is the stylus pressure.
• The display screen will automatically dim to saving mode after 5 seconds of inactivity and turn off after 60 seconds of inactivity.
• When a battery runs out, a LO indicator will flash on the screen. Then replace both batteries.
• PCS button balances count by calculating the average weight of one piece-weight called a unit weight, then applying it to the total weight of what you are trying to count. Firstly, weigh one PC, then weigh the bundle, then push the PCS button and on the display you’ll get a number of PCS.

Technical data and precautions
Sensitivity - 0.01g
Operational weight range - 0.1g to 200g
Battery - 2 × AAA
Size - (L) 120mm × (W) 60mm × (H) 17mm
Weight - 70g
LCD screen with back lighting
Auto off function
Protect the device against high temperatures, dust and humidity
Carefully lower the measurement object on the measurement plate
Operating temperature range +10⁰ - +30⁰C
Do not place objects weighting more than 200 g on the measurement plate
Do not place the device on an uneven surface, it may result in not accurate measurements

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

The TTW10H is our turntable weight which combines two needful features for every vinyl DJ:
A disc stabilizer and an adapter for 7“ records.
The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

OUR HANDCRAFTED TURNTABLE WEIGHTS WORK EITHER FOR 12“ AND 7“ RECORDS.

Our turntable weights feature a smart mechanism: The 7“ adapter inside the weight is moveable- as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10H. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10H comes in a neat printed box with a linen bag to take it out to your gigs.

The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

STAINLESS STEEL BODY WITH A SOLID BRASS CORE.

• DIMENSIONS: Ø75mm × 33mm (Ø2.9 × 1.3 inches)
• WEIGHT: 808g (1.78 lbs)

Handmade in Switzerland

Video: https://youtu.be/e1be_0Ijhms
https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

PROS
•Modern turntable
•Bluetooth speaker connectivity
•Directly digitises vinyl to a storage medium
•Semi-automatic

PRODUCT INFORMATION
•The Lenco LBT-120BK Turntable is a semi-automatic record player with Bluetooth functionality. You can connect the record player to your Bluetooth speaker in seconds and enjoy a full and warm sound from the comfort of your couch. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your LP or single at the right speed.

•And what if you want to enjoy your favourite records while cycling or in the train? The Lenco LBT-120BK digitises all your favourite records via the built-in USB port. You can transfer the rec•ordings to a USB stick in next to no time and carry them with you in your pocket.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LBT-120BK turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tone arm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LBT-120BK is supplied with a dust cover that keeps your Lenco fresh and clean during brief periods when you are not using your turntable.

SPECIFICATIONS
•SKU: A002991
•Product height: 12.20 cm
•Product depth: 36.20 cm
•Product width: 42.20 cm
•Number of RCA outputs: 1
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902039822
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 12W

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Wood
•SKU: A003104
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040989
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes

Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.
The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.
On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.
With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record.

FEATURES
•Quartz-Controlled HiFi turntable with high torque
•Brushless Direct Drive DC Motor
•Precision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotation
•Deadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and damping
•Static-balanced S shaped tonearm with VTA adjustment
•Adjustable anti-skating dial for improved cartridge tracking
•Pre-installed Ortofon 2M Red cartridge
•Integrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM)
•Universal Headshell Connector provides added flexibility
•High Quality Phono outputs (with separate grounding connection)
•Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable)
•Sunk-in terminal cavity for protected connection
•Especially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decoupling
•Supplied counterweight supports a wide variety of cartridges
•Elegant design with deep black Piano Finish and a fully gold anodised Platter
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

TECHNICAL DATA

Turntable Section:
•Type: Direct Drive Manual Turntable System
•Drive: Quartz driven upper-torque direct drive
•Motor: 16 pole, 3 phase, brushless DC motor
•Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
•Starting Torque: 4500 g/cm
•Start-up time / rpm change: less than 0.2 sec.
•Wow and flutter: 0.01% WRMS
•S/N Ratio: More than 55 dB (DIN-B)
•Brake system: electronic brake

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 332 mm
•Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
•Type: Universal Static Balanced S-Shaped
•Effective Length: 230 mm
•Overhang: 15 mm
•Tracking Error Angle: Less than 3 degree
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•Adjustable Tonearm Base (VTA): 0-6 mm
•Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
•Anti-Skating Range: 0 – 3 g
•Effective tonearm mass: 20 g (incl. headshell)

Terminals:
•1x PHONO Out (gold-plated), 1x GND Earth Terminal
General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power Consumption: 9 W
•Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
•Weight: approx. 12.8 kg

Included Accessories:
•Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, power cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

•The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musicians
•Designed for Serato DJ Pro: control 7 new colour-coded performance modes
•Platter Play mode: performance pads can be used to control the speed of the platter to enable melodic and musical live performances

FEATURES
•NEW in the MK2 version:
•The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musicians
•Designed for Serato DJ Pro: control 7 new RGB colour-coded performance modes
•Platter Play: in this mode, the performance pads can be used to control the speed of the platter to enable melodic and more musical live performances
•Extra large, highly responsive performance pads with multi-colour LEDs
•22 scales are available with the option to create up to 9 custom scales
•Pitch bending function via speed select buttons in Platter Play mode
•Reworked control section: more streamlined multi-encoder and intuitive mode section
•First of its kind: independent pad modes (when used in conjunction with the ELITE mixer)
•Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation
•More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
•Fine-tuned motor control for further optimization of wow and flutter and rotation
•Newly-developed, height-adjustable MK2 tone arm base (VTA)
•Particularly lightweight and rigid satin aluminium material used for tone arm
•Adjustable pitch scale for precise adjustments
•Additional output: the turntable can be connected to two mixers at the same time and also allows easy switching from DVS to vinyl
•Optional ground terminal offers additional protection in complex club & studio environments
•Easily replaceable, freely rotatable LED needle light in new unibody aluminium design
•High-quality and hard-wearing deep black, metallic finish
•Quartz driven hybrid turntable instrument with upper-torque direct drive
•Takes your DJ performances to a new level of creativity and musicality
•MIDI compatible control section consists of multi-encoder, 8 large LED pads, three layers with 7 performance modes (cue, sampler, saved loops, pitch play, loop, loop roll, slicer) and 2 user modes
•Digital LC display for pitch, BPM, scale, key, deck assignment and firmware settings
•Seamlessly combines a powerful musical instrument and a world class professional DJ turntable
•Adjustable stop time (0.2 - 6 sec.)
•Precise motor control with 3 speeds (33 1/3, 45 & 78 RPM)
•Precision manufactured, die cast aluminium turntable
•Rubber inlays reduce vibrations and background noise
•Statically balanced, universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•High-resolution pitch fader (0.02 % resolution)
•Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
•Quartz lock
•Reverse function: switch for forward and reverse operation
•Smart USB link for up to 4 turntables
•Auto deck-assign feature when linked
•Recessed connection cavity for easy installation in cases & seamless adjustment
•Phono and line out (no grounding required)
•Removable mains and RCA cables
•Safety mains switch
•Shock-absorbing feet insulate against vibrations
•Incl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

TECHNICAL DATA

Turntable:
•Type: direct-drive turntable
•Drive: quartz driven upper-torque direct drive
•Motor: 16-pole, 3-phase, brushless motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
•Starting torque: 2.8 - 4.5 kg/cm (adjustable)
•Adjustable stop time (0.2 - 6 sec.)
•Start-up time / change to RPM: < 0.2 sec
•Wow and flutter: 0.01% WRMS*
•S/N ratio: > 55 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: die cast aluminium
•Diameter: 332 mm
•Weight: approx. 1.5 kg

Tone arm:
•Type: universal, static balanced, S-shaped
•Effective length: 230 mm
•Overhang: 15 mm
•Tracking error range: < 3°
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•VTA setting range: 0 - 6 mm
•Usable weight of pick-ups: 3.5 ~ 8.5 g (incl. headshell 13 ~ 18 g)
•Anti-skating range: 0 - 3 g
•Effective tone arm mass: 30 g

Connections:
•1x PHONO/1x LINE out (gold-plated), 1x GND earth connection, 1x USB port (type B)

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 17 W
•Dimensions: 458 (w) x 354 (d) x 144,6 (h) mm
•Weight: approx. 11.8 kg
•Incl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

The Stand One was developed to use a Portablismturntable at the same height as a normal mixer or turntable. It is made of aluminium and each foot can be adjusted individually. Therefore it adapts perfectly to any surface.

Weight: 810g

Delivery without Numark PT01 Scratch.

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

THE NEW JESSE DEAN DESIGNS JDDPTA

PORTABLE TURNTABLE TONE ARM KIT.



WITH THESE FEATURES:

• 3K CARBON FIBER TUBE AND HEAD SHELL
• BILLET ALUMINUM GIMBAL WITH BALLBEARINGS
• CUSTOM ENGINEERED LIMITED BOUNCE TENSION SYSTEM
• PHONO PRE-AMP INCLUDED
• EASY WIRE INSTALLATION KIT
• Made in SoCal, USA
CAPATABILITY:

NUMARK PT-01
NUMARK PT-01USB
NUMARK PT-01SCRATCH
VESTAX HANDYTRAX
VESTAX HANDYTRAX-USB

Weight 10 oz
Dimensions 10 x 3 x 2 in

Installation Guide:
[youtube https://www.youtube.com/watch?v=kKWMM6O2rRA?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

[youtube https://www.youtube.com/watch?v=bidUVnQ_49k?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE OR OTHER TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume
Aufgrund der überwältigenden Nachfrage aus der Serato Community hat Serato die neue Performance-Serie 7" Control Vinyl released. Diese Control Vinyl wird als Pärchen in der beliebtesten Farbe schwarz ausgeliefert und beinhaltet auf beiden Seiten das neuste Serato NoiseMap Control Signal in einer neu gemasterten Form. Dieses Signal ist nun 6dB lauter als zuvor, was ein deutlich präziseres Tracking und angenehmeres Vinyl-Feeling zur Folge hat.

Features


• 2x 7“ Control Vinyl (CV 2.5) in schwarz
• Control Vinyl zur Steuerung der Serato DJ und Serato Scratch Live Software
• A-Seite und B-Seite mit 4 Min. Control Signal
• Das bewährte Serato NoiseMap Control Signal, remastered und 6dB lauter als bisherige Control Vinyls
• „Vinyl Select“ Funktion ermöglicht das Steuern der MP3 Files in der Library
• Durchgehendes Steuersignal auf der Control Vinyl erlaubt ein problemloses exaktes Scratchen und mixen
• Innovatives Positionierungssystem für ein schnelles und genaues Positionieren der Nadel (Needle Droping)
• Sichtbare in Minuten unterteilte Zeitmarkierungen auf der Control Vinyl

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

Turntable platter

Functional and easy to use sound improvement!

Upgrade your Elemental or Essential turntable with Acryl it E. Acryl it E is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.

The change is easily made: just exchange your metal platter for Acryl it E. Acryl it E is able to improve overall performance significantly!

Features:
• Suitable for Elemental, Essential & Primary turntables
• Substitutes MDF platter
• Inert material avoids resonances
• Ideal for use with Clamp it
• Audiophile sound tuning
• Optical upvaluation

Technical Specifications:
• Material: Acryl satiniert
• Diameter: 300 mm
• Height: 20 mm
• Weight: 1,2 kg net

760 g layer weight to stabilize vinyl records.
Ø 70mm

A REBORN CLASSIC.
The PLX-1000 is precision engineered for the booth, drawing on 50 years’ experience of making high-end turntables. This high-torque direct drive turntable is equipped with a classic layout and a rubber-lined, S-shaped tone arm that improves isolation and prevents feedback. It is solidly built for excellent vibration damping and ultra-precise, high grade audio playback.

Featuring next generation improvements, the PLX-1000 is the perfect score for professional DJs and vinyl enthusiasts. Combine this turntable with your Pioneer DJM mixer and get the ideal DJ system set-up.

TURN THE TABLES
The high-torque direct drive makes sure that your tracks reach a rotation speed of 33⅓ rpm in merely 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more). Plus it ensures stable rotation and exceptional control.

PICK UP THE PACE
Unique to this turntable is the multi-pitch tempo control. Next to a standard variable width of ±8%, you can also select a variable width from ±16% and ±50%. A simple reset button instantly reverts to the fixed rotation speed at ±0%.

EASILY CONNECTED
For low impendance and amazing sound quality output, you can easily connect to the professional-grade, gold-plated RCA jacks. Ideal for a DJ on the road, the PLX-1000 has interchangeble power and audio cables.

ncluded Accessories
Turntable sheet
Slip mat and sheet
Dust cover
Head shell
Balance, sub and shell weights
Audio cable
Ground wire

Width
453 mm
Height
159 mm
Depth
353 mm
Weight
13.1 kg
Power Requirements
220-240 V / 50/60 Hz

Drive Method
Quartz lock, servo-type, direct drive
Platter
Aluminium, die-casting diameter: 332 mm
Motor
3-phase, brushless DC motor
Braking System
Electronic brake
Rotation Speed
33⅓-45 rpm
Rotation Adjustment Range
±8, ±16, ±50 %
Wow and Flutter
<0.01% (Measured by obtaining signal from built-in frequency generator of motor assembly.)
Signal-to-Noise Ratio
70 dB
Starting Torque
> 4.5 kg/cm
Start Time
0.3 sec (at 33⅓ rpm)

Arm Type
Universal type S-shape tone arm
Gimbal-supported type bearing structure
Static balance type
Overhang
15 mm
Effective Length
230 mm
Tracking Error
Within 3°
Height Adjustment Range
6 mm
Stylus Pressure Variable Range
0-4 g (1 scale 0.1 g)
Single Cartridge Weight
3.5-13 g

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

• Crafted from high quality materials and components
• Pre-mounted Ortofon OM5E Cartridge
• Pre-mounted Bluetooth 5.0 Module

Timeless Design
The Transparent Turntable is a reinvention of a classic vinyl record player, designed for a modern home and an ever evolving technology. The Transparent Turntable is meticulously crafted out of aluminium and tempered glass. It is a belt driven system with a built in phono stage, and a pre-mounted cartridge from Danish Ortofon.

• Cartridge: Ortofon OM5E (MM)
• Stylus: Elliptical Diamond

Modular
Just like all Transparent products the TT has a completely modular design. With the future in mind, it is made for flexibility, upgradability and repairability.

• Cartridge Mount: Standard ½ in
• Headshell Mount: Standard SME

Transparent Sound
The Transparent Turntable plays music to any sound system, but works best with a Transparent Speaker. It plays with effortless clarity and precision, and offers playback either through cable or Bluetooth.

• Wireless Module: Bluetooth 5.0
• Phono Stage: Built in (with on/off switch)

Technical Specifications:
• Nominal speeds: 33 ⅓ and 45 RPM
• Speed variance: 33: ±0.70% 45: ±0.60%
• Wow and flutter: 33: ±0.25% 45: ±0.25%
• Signal to noise: ≥ 70dB at 1kHz, 0dB A-weighted
• Frequency range: 20-25.000Hz +3 / -3
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.5-2.0 g (15-20 mN)
• Tracking force, recommended: 1.75 g (17.5 mN)
• Tracking angle: 20°
• Replacement stylus unit: Ortofon Stylus 5E
• Effective tonearm mass: 13.5g
• Effective tonearm length: 220mm / 8.7in
• Overhang: 19.5mm / 0.77in
• Max power consumption: 15W
• Dimensions (W x H x D): 410 x 125 x 320 mm / 16 x 5 x 13 in
• Weight: 6,5kg / 14lb
• Dimensions packaging (W x H x D): 580 x 240 x 460 mm / 23 x 10 x 19 in
• Weight incl. packaging: 7,0kg / 15lb
• Rated input voltage: 100~240Vac, @ 50/60Hz.
• Bluetooth version: 5.0
• Normal or True Wireless (stereo) pairing
• 3.5 mm port for digital optical and analogue signals
• µUSB port for 5V power
• RX and TX mode (switch)
• Chip: Qualcomm CSR8670C
• Codec: aptX LL / SBC / MP3 / AAC
• Low Latency: <40ms
• Gold-plated contacts for perfect signal transmission

Premium Class Direct Drive Turntable System SL-1500C

The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge
Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

Simple Design with Functional Beauty
The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.

Specs:
• The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
• Complete Turntable with a Built-in Phono Equalizer and Cartridge
• Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
• Simple Design with Functional Beauty

Technical Data:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 and 78 r/min
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 % W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 2.0 kg (Including rubber sheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32'　(at the outer groove of 30 cm (12") record)
- Within 0° 32'　(at the inner groove of 30 cm (12") record)
• Applicable Cartridge Weight Range:
(without auxiliary weight):
- 5.6 - 12.0 g
- 14.3 - 20.7 g (including head shell)
(with auxiliary weight):
- 10.0 - 16.4 g
- 18.7 - 25.1 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1
- LINE (Pin Jack) x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2W (Standby)
• Dimensions (W x H x D): 453 x 169 x 372 mm
• Weight: Approx. 9.9 kg
• Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Cartridge(ortofon 2M Red), PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

Providing unbeatable accuracy! The Stroboscope Testrecord together with the Speed Light V2 give the best results in adjusting your turntable speed.

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord%20+%20Speedlight_E+D.pdf

Ortofon Record Stabilizer Heavy - Silver - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record stabilizer - Silver - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Now with 2-way Bluetooth!

The Bluetooth Voyager briefcase design record player stands out because of the sleek grill at the front where the two speakers are behind, waiting for you to turn up the volume. Get the best use out of your record player with the 2-way Bluetooth receiver. Use the Voyager as a Bluetooth speaker and listen daily to your digital music, or connect an external Bluetooth speaker for an amplified sound. The Voyager record player also comes with Pitch Control, Aux-in, Headphone jack and RCA output.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3 ¾”, 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

Level Gauge - Stainless steel
High precision gauge, calibrated.

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

Record clamp.
LP-clamping unit with resonance absorbing locking unit and stainless steel grip.
Weight: 190 g

Acrylic dust cover for Smart Matrix Silent.
Dimensions (W/D/H in mm): 340 x 340 x 75 (Outer dimension)

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black/silver turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The Jasper has sleek tapered legs and exquisite mid-century vibes. This record player delivers retro design with sound and functionality that’s 100% modern. The three-speed turntable includes all the bells and whistles: a built-in Bluetooth receiver, headphone jack, and aux input. And that deep walnut finish with gold accents? Pure perfection. With stunning dark looks and crystal-clear sound at a fantastic price, the Jasper is truly the total package.

Specifications:
• Turntable, plays 7", 10" & 12" records
• 2 built-in speakers
• Bluetooth in & Out
• Headphone Jack
• 45 RPM adapter
• Power adaptor 6V
• Aux-IN
• Np16 needle
• 4 Legs
• 38,1 cm (w), 66.6 cm (h), 35.5 cm (d)
• Weight: 6,35 kg

They say clothes make the [wo]man, but in this case, they also make the stereo. Outfitted in eye-catching heather grey fabric accented with walnut wood and silver accents, the Aria Shelf System is definitely dressed for success. The Aria is more than just a pretty face, though: the three-speed turntable boasts a built-in Bluetooth receiver, FM radio, and aux input, and the speakers deliver 2x25 watts of sound. Stunning looks and personality to match? We’re absolutely swiping right on the Aria Shelf System.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Built-in speakers | 1” 6Ω 5W x 2 + 4" 6Ω 20W x 2
• NP16 needle
• Belt-driven
• FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter output 15V 3A
• Turntable dimensions: 34,3 cm (w), 11,4 (h), 31 cm (d)
• Speaker dimensions: 16.5 cm (w), 24.7 cm (h), 18.4 cm (d)
• Weight: 7,09 kg