Turntables 125 Items

Analogue HiFi Turntable for Audio Purists

The TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.

Smooth belt drive & low-noise DC motor

The precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.

Static balanced, straight tone arm with optimal tracking performance

The TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.

Flexible Headshell Connection

The headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.

Classy, matt slimline housing with high-quality terminal

Alongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.

FEATURES
•Belt-driven Hi-Fi turntable
•Factory fitted with Ortofon OM10 cartridge
•New straight tonearm design with optimal tracking performance
•Manual arm lift
•Low vibration DC motor
•Integrated motor control with Speed-Switch for conveniently selecting
two different speeds 33 / 45 rpm
•External DC power supply
•Die-cast Aluminum Platter with chrome edging
•Anti-Skating Wheel-System
•Gold-plated, corrosion resistant connections (all cables detachable)
•Slim-line wooden Plinth with mat black finish
•Convenient power switch at the side bottom
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

TECHNICAL DATA

Turntable Section:
•Type: Belt-Driven Analogue Turntable System
•Drive: Belt drive
•Motor: DC Motor
•Turntable Speeds: 2 speeds (33 1/3, 45)
•Wow and flutter: 0.2% WRMS
•S/N Ratio: >65 dB (a-weight)

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 300 mm
•Weight: 550 g

Tonearm Section:
•Type: Static Balanced Straight Tonearm
•Effective Length: 224 mm
•Overhang: 19 mm
•Tracking Error Angle: 25°
•Tracking Force: 1.5 g
•Applicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)
•Anti-Skating Range: 0 – 3 g

Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:
•Power supply: DC 12 V, 500 mA
•Power Consumption: 6 W
•Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
Weight: Approx. 4.6 kg

Included Accessories:
Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

Premium HiFi-turntable with digital USB-Audio Interface.

• Authentic HiFi turntable with digital USB-Audio Interface
• Pre-installed Ortofon 2M Red cartridge
• Low-vibration DC motor

Over 25 years experience
With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.

Quiet DC drive
The heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.

Electronic speed control for 33, 45 & 78 rpm
The TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.

Revised tonearm construction
The redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience.

Anti-skating wheel
The anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.

Headshell connection
The headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.

USB recording function
The integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.

Semi-automatic stop
With the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.

Shock-absorbing feet
Decoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal.

Precision-manufactured die-cast aluminium turntable
The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.

Solid base with piano finish
The sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image.

Immediate listening pleasure with hi-tech Ortofon cartridge
The TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.

Gold-plated connections
The gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.

High-end pre-amplifier
Equipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.

A class of it's own
The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

SPECIFICATIONS
FEATURES:
• Authentic HiFi turntable with precision belt drive
• Supplied with pre-assembled Ortofon 2M Red cartridge
• Optimised tonearm design for optimal tracking accuracy with flexible SME mounting
• Integrated high-quality preamplifier, can be switched on/off (phono/line output)
• USB recording function: recording and digitalisation of vinyl via simple USB connection for PC/Mac
• Semi-automatic stop function (can be activated optionally)
• Manual tonearm lift for analogue playback pleasure
• Low-vibration DC motor
• Integrated motor control with large speed selector switch (33/45/78 RPM)
• External DC power supply for trouble-free operation (100-230 V / 12 V / 500 mA)
• Precision-machined die-cast aluminium platter for resonance optimisation
• Infinitely adjustable anti-skating system with rotary wheel for optimum tracking accuracy
• Gold-plated, anti-corrosion connectors (all cables removable)
• Special turntable feet for effective decoupling
• High-gloss piano-finish cabinet
• On/Off switch on the back of the unit
• Incl. Ortofon 2M Red cartridge pre-mounted on headshell, counterweight, dust cover incl. hinges, felt mat, aluminium turntable, 7" aluminium adapter, RCA & USB cable and international power supply (UK/EU/US)

TECHNICAL DATA
TURN 3 MK2:
• Type of turntable: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45 & 78
• Wow and Flutter: 0.2% WRMS
• Analogue Output: Phono / Line, switchable
• Connections: RCA Audio output (gold-plated), USB type B
• Phono Output Level: 4.0 mV (with Ortofon 2M Red)
• Line Output Level: 224 mV (with Ortofon 2M Red)
• Tone Arm type: Straight
• Effective Arm Length: 223.6 mm
• Effective tonearm mass: 21.4 g
• Overhang: 18.6 mm
• Tracking force Range: 18 mN
• Platter diameter: 300 mm
• Anti-Skating adjustment: Yes
• Type of cartridge: MM (Ortofon 2M Red)
• Power consumption: 6W
• S/N: >60 dB or higher
• USB Audio Output with 48 kHz / 16-Bit
• USB Funktion: USB rec. function
• Supported Operating System: Windows & Mac
• Dimensions: 450 x 352 x 138.7 mm (incl. Dust cover)
• Weight: 6.5 kg

ORTOFON 2M RED:
• Output voltage at 1000 Hz, 5cm/sec.: 5,5 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 μMm
• Compliance, dynamic, lateral: 20 μMm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μMm
• Tracking force range: 1,6-2,0g (16-20 mN)
• Tracking force, recommended: 1,8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1,3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g

Manual: https://www.reloop-hifi.com/media/productattach/t/u/turn3mk2_im.pdf

Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.
The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.
On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.
With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record.

FEATURES
•Quartz-Controlled HiFi turntable with high torque
•Brushless Direct Drive DC Motor
•Precision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotation
•Deadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and damping
•Static-balanced S shaped tonearm with VTA adjustment
•Adjustable anti-skating dial for improved cartridge tracking
•Pre-installed Ortofon 2M Red cartridge
•Integrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM)
•Universal Headshell Connector provides added flexibility
•High Quality Phono outputs (with separate grounding connection)
•Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable)
•Sunk-in terminal cavity for protected connection
•Especially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decoupling
•Supplied counterweight supports a wide variety of cartridges
•Elegant design with deep black Piano Finish and a fully gold anodised Platter
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

TECHNICAL DATA

Turntable Section:
•Type: Direct Drive Manual Turntable System
•Drive: Quartz driven upper-torque direct drive
•Motor: 16 pole, 3 phase, brushless DC motor
•Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
•Starting Torque: 4500 g/cm
•Start-up time / rpm change: less than 0.2 sec.
•Wow and flutter: 0.01% WRMS
•S/N Ratio: More than 55 dB (DIN-B)
•Brake system: electronic brake

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 332 mm
•Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
•Type: Universal Static Balanced S-Shaped
•Effective Length: 230 mm
•Overhang: 15 mm
•Tracking Error Angle: Less than 3 degree
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•Adjustable Tonearm Base (VTA): 0-6 mm
•Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
•Anti-Skating Range: 0 – 3 g
•Effective tonearm mass: 20 g (incl. headshell)

Terminals:
•1x PHONO Out (gold-plated), 1x GND Earth Terminal
General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power Consumption: 9 W
•Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
•Weight: approx. 12.8 kg

Included Accessories:
•Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, power cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

PREMIUM BELT DRIVE USB TURNTABLE SYSTEM

HIGHLIGHTS:
Belt-driven HiFi turntable with Ortofon 2M Red
20 mm acrylic platter with LED lighting
Decentralised drive motor with external belt guide

SOUND MEETS DESIGN
The Turn 7 bridges the gap between high-end HiFi turntables and uncompromising design. The belt-driven turntable meets the exacting demands of audiophile music fans thanks to precisely manufactured components. The acrylic platter with LED lighting and the external drive belt make the Turn 7 an absolute eye-catcher.

POWERFUL AND STEADY DRIVE
A decentralised, low-vibration DC motor drives the Turn 7. The integral flat belt runs gracefully along the turntable exterior, ensuring smooth operation and a sophisticated appearance. The start/stop rotary switch allows you to select between the turntable's two speeds (33 and 45 RPM).

HEART OF ACRYLIC: THE TURNTABLE PLATTER
The acrylic platter is 20 mm thick, weighs 1.7 kg, and has outstanding evenness thanks to precision manufacturing. It also has excellent antistatic characteristics. As a result, crystal-clear audio is possible without using a platter mat. The satin finish of the material creates a focal point and contrasts with the otherwise plain design of the belt-driven turntable.

LET THERE BE LIGHT – LEDS INSIDE
One of the unique features of the Turn 7 is the optional, blue platter illumination. Inconspicuously placed beneath the platter, multiple LEDs with a diffuser cover sets the mood and creates a warm and inviting ambience.

TOP-CLASS TONE ARM
The high-quality carbon tone arm has exceptional acoustic properties. The turntable's authentic sound is brought out to its full potential by effectively cancelling out vibrations. The ability to adjust the height (vertical tracking angle – VTA) and an anti-skating adjustment ensure maximum precision.

ORTOFON 2M RED PRE-INSTALLED
The turntable comes with the Ortofon 2M Red cartridge system pre-installed. The Ortofon 2M Red has an elliptical stylus tip and excellent sonic characteristics, including first-rate sound accuracy and reproduction. The Ortofon 2M Red is a highly versatile cartridge system with an open, dynamic sound and warm tones. The universal headshell connection (SME) adds more options for cartridge systems.

METICULOUSLY PERFECTED
In addition to its high-quality preamplifier, the Turn 7 also features versatile switching between line and phono signals. The gold-plated corrosion-resistant RCA connectors ensure the best possible signal transmission. The built-in USB output allows you to digitise vinyl records.

SIMPLE DESIGN & PURE FUNCTIONALITY
The sturdy MDF wooden plinth and height-adjustable isolator feet with aluminium surround provide effective decoupling for the turntable. The high-gloss piano lacquer is a classy contrast to the timeless minimalism while emphasising the Turn 7's superior quality.

FEATURES:
• Premium belt-driven HiFi turntable
• Decentralised DC motor with external drive belt on the acrylic platter
• Fully manual operation with motor control switch for switching between speeds (33/45 RPM)
• Precision-machined, 20 mm thick solid acrylic platter (1.7 kg) with outstanding levelling and electrostatic properties for a crystal-clear sound
• Indirect blue LED lighting on the acrylic platter (can be switched on/off)
• Audiophile carbon tonearm with height adjustment (VTA) and anti-skating adjustment
• Pre-installed Ortofon 2M Red cartridge for optimised sound reproduction and fidelity
• Universal headshell connection (SME) for additional flexibility
• USB recording function: Recording and digitisation of vinyl via the simply USB connection for PC/Mac
• High-quality integrated preamp (switchable phono/line output)
• Gold-plated, corrosion-resistant audio connections (removable power and RCA cable)
• Height-adjustable, shockproof aluminium feet for effective decoupling
• Solid MDF plinth with piano finish and a timeless design
• Incl.: dust cover, 2x hinges, felt mat, international power supply (UK/EU/US), RCA cable, headshell with Ortofon 2M Red (pre-installed), 7" aluminium adapter, acrylic turntable platter, allen key, USB-cable, instruction manual & counterweight

TECHNICAL SPECIFICATIONS:
Turntable Section:
• Type of turntable: Belt-Driven manual Turntable System with USB Interface
• Drive: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45
• Starting Torque: //
• Start-up time / rpm change: //
• Wow and Flutter: 0,2% WRMS
• S/N Ratio: >45dB or higher
• Breaking System: Manually
Turntable Platter:
• Turntable Platter: Acrylic glass
• Diameter: 300 mm
• Weight: 1.7 kg
Tonearm Section:
• Type: Straight Tonearm
• Effective Length: 223.6 mm
• Overhang: 18.61 mm
• Tracking Error Angle: ±1.5°
• VTA Adjustment Range: - 2 ~ 4 mm
• Applicable Cartridge Weight: 7.2 ~ 11.2 g (incl. Headshell)
• Anti-Skating Range: 0 - 4 mm
• Terminals: 1x PHONO/LINE Out
Cartridge:
• Ortofon 2M Red
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 µ Mm
• Compliance, dynamic, lateral: 20 µ Mm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 24.7°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g
General:
• Power Supply: 12V, 1A DC
• Power consumption: 12W
• Dimensions: 420(W) x 356(D) x 148(H) mm
• Weight: 8.2 kg

Premium HiFi turntable with Ortofon 2M Blue cartridge

DESIGNED WITH PRECISION FROM THE OUTSET
The Turn X's direct-drive DC motor offers incredibly accurate and consistent speeds. The high torque ensures lightning-fast start-up times and minimal variances of just +/-0.03%. The Turn X excels when operated in full manual mode, where its electronic brake and rotary switch for smooth starting and stopping, which also doubles as a speed selector (33, 45 and 78 RPM), shine.

BALANCE PERFECTION
A solid aluminium block supports the record player's precision-machined die-cast platter. Its hefty 2.1 kg, 332 mm diameter and 22.5 mm thickness ensure smooth, even movement. The damping rubber coating on the back of the turntable and the rubber mat provide excellent isolation properties and minimise vibrations.

AUDIOPHILE TONEARM
The statically balanced S-shaped tonearm can be adjusted in height to change the cartridge's azimuth (the angle at which the needle approaches the record) and the record's vertical tracking angle (VTA). The tonearm design guarantees free and fluid movement and optimum cartridge performance.

CRYSTAL CLEAR SOUND QUALITY
The Turn X has a high-quality Ortofon 2M Blue cartridge pre-installed, ensuring excellent dynamics and sound resolution to satisfy even the most discerning audiophiles. Another highlight: The universal SME connector enables a quick and easy cartridge system change if required.

SOUND AND NOTHING BUT SOUND
The turntable's solid MDF chassis is exceptionally sturdy and robust, keeping unwanted resonances at bay from the outset. As a bonus, the Turn X is effectively decoupled thanks to the height-adjustable isolator feet.

DESIGN WITHOUT COMPROMISE
In addition to meeting the exacting demands of vinyl enthusiasts, the Reloop Turn X is a true visual showpiece. The record player's sleek design, sophisticated one-button control, and classy piano lacquer finish make it a real eye-catcher.

ATTENTION TO DETAIL
Last but not least, the Turn X features a gold-plated high-resolution phono output and a gold-plated ground connector for optimum signal transfer and corrosion resistance. Interference is reduced even further by the power switch's ultra-low noise insulation.

FEATURES:
• Quartz-controlled, premium HiFi turntable
• Super high torque, direct drive DC motor with ultra-precise rotation speed
• Extra-heavy, CNC machined 22,5 mm thick aluminium platter with rubber damping
• Quick start-up and drift-off rotation speed less than +/-0.03%
• Full manual operation with motor control-switch to select three different speeds (33, 45 and 78 RPM)
• Precision machined, extra heavy aluminium die-cast platter for a perfectly balanced rotation (305 mm diameter, 22.5 mm thick, 2.1 kg)
• Deadening rubber covering rear platter surface & special 5 mm rubber mat for optimized resonance control and damping
• Sunk-in platter cavity construction
• Static-balanced S-shaped tonearm with VTA adjustment
• Adjustable anti-skating wheel for optimal pick-up tracking
• Pre-installed Ortofon 2M Blue cartridge for excellent dynamics and sound resolution
• Universal headshell connector (SME) provides added flexibility
• Counterweight supplied supports a wide variety of cartridges
• Premium, high-resolution audio phono outputs (with separate grounding connection)
• Gold-plated, corrosion-resistant audio connections (detachable power and RCA cables)
• Built-in switching power with ultra-low noise isolation design
• Rigid construction, with extra-heavy, solid MDF wooden plinth
• Height-adjustable, shock-resistant insulator feet for effective decoupling
• Timeless design with high-gloss, black piano finish
• Accessories included: Turntable platter, dust cover, 2x dust cover hinges, balance counterweight, Phono RCA cable with grounding cable, AC power cord, rubber mat, instruction manual, Ortofon 2M Blue cartridge & headshell

TECHNICAL DATA
Turntable Section:
• Type of turntable: Direct drive, fully manual
• Drive: Quartz driven upper-torque direct drive with precision rotation
• Motor: DC Motor, 16-Pole, 3-Phase, brushless
• Rotation speeds: 33 1/3, 45 & 78 RPM
• Starting Torque: More than 4500 g/cm
• Start-up time / rpm change: Less than 0.3 sec.
• Wow and Flutter: Less than 0.1% WRMS (JIS WTD)
• S/N Ratio: More than 60dB (DIN-B)
• Breaking System: Electronic brake

Turntable Platter:
• Turntable Platter: Aluminium die-cast
• 305 mm diameter
• Weight About 2.1 kg

Tonearm Section:
• Type: Static balanced S-Shape
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle: Less than 3 degrees
• VTA Adjustment Range: 0-6 mm
• Applicable Cartridge Weight: 17 – 25 g (incl. Headshell)
• Anti-Skating Range: 0-3 g
• Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal

Cartridge:
• Type of cartridge: Ortofon 2M Blue
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 25 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 80 µm
• Compliance, dynamic, lateral: 20 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Blue
• Cartridge weight: 7.2 g

General:
• Power Supply: AC IN 100~240V, 50/60 HZ
• Power consumption: 3W
• Dimensions: 460(W) x 367.3(D) x 172.6(H) mm
• Weight: 10.35 kg
• Incl.: dust cover + 2x hinge, rubber mat, power supply cable, RCA cable with grounding connection (gold-plated), Headshell with Ortofon 2M Blue (pre-installed), turntable platter, operation manual & counterweight

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

STANTON STX
LIMITED EDITION PORTABLE SCRATCH TURNTABLE
RAZOR SHARP CUTS, RIGHT AWAY

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivaled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

SCRATCH WHENEVER, WHEREVER
Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use.
The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB-C input. For extended scratch sessions, the USB-C input can also be used with external power sources for even more cutting time.
To top everything off (literally), the latching lid also functions as a stackable, latching base, to bring the STX to standard turntable height.

WELL-CONNECTED FOR CREATORS
Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8” stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

PERFORMANCE READY
The modification culture is alive and well in the portablism world. Since the inception of this art form, we’ve seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Technical Specifications
Connections (1) RCA line-level output (stereo pair)
(1) 1/4” (6.35 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recordings

Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power (2) 3.7V Li-ion batteries

Dimensions
(width x depth x height)
13.0” x 13.0” x 4.0” (3.25” without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)

Weight 5.3 lbs.
2.4 kg

2-speed Analog Turntable with Phono EQ and Bluetooth
A wireless turntable for new way of enjoying vinyl records

The TN-280BT is not only a great-sounding turntable for music enthusiastic who wants to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records

The TN-280BT also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.

The belt-drive motor on the TN-280BT reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.

For music enthusiasts who want to hear every sensuous note of their vinyl collection.

Main Features

2-speed Belt-drive turntable
Built-in Bluetooth transmitter
Built-in MM phono equalizer and Phono, Line, and Bluetooth outputs
High-performance MM cartridge included (Made in Japan)
Aluminum die-cast platter
Anti-skating mechanism
High-density MDF cabinet for better vibration and resonance

Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.2%
Signal-to-Noise Ratio more than 67 dB (A-weighted)
60 dB (unweighted, 20kHz, LPF)
Turntable (Platter)
Material Aluminum Die-cast
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Length 223 mm
Stylus Pressure Range 0 to 5 g
Compatible Cartridge 3.5 to 6.5 g
Anti-skating Adjustment Supported
Head-shell and Cartridge sections
Type MM-type
Stylus Shape Elliptical
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Output Impedance 47k ohms
Output Voltage 4.5 mV (+/-3dB)
Stylus Pressure 2.0 g (+/-0.5 g)
Cartridge Weight 5.7 g (+/- 0.5 g)
Head-shell Weight 10 g (including nuts, screws, and wires)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 4.5 mV (+/-3dB)
LINE 120 mV (-13dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

General
Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.5 Watts or less
Dimensions (W x H x D) 420 × 117× 356 mm / 16.5” x 4.6” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Felt Mat x 1
EP Adapter x 1
Counter Weight x 1
Head-shell x 1 (MM-type cartridge installed)
Turntable (Platter) x 1
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

New motor, developed exclusively for direct-drive turntables

The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.

Knife-edge, pivot-point tonearm bearings

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).

Precision anti-skating and stylus-pressure adjustment

As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.

Pre-installed Oyster cartridge by SUMIKO

The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.

Built-in PHONO EQ amplifier supporting MM cartridges

The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.

Die-cast aluminium platter

In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.

Insulating feet with excellent shock absorption

The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.

2-speed turntable for 33-⅓ and 45 rpm

The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Features at a glance:
• Direct-drive analog turntable
• Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
• Die-cast aluminium platter
• Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
• Multi-layer piano black or natural walnut veneer finish
• Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
• Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
• 2-speed drive offering 33-⅓ and 45 rpm
• Gold-plated oxidation-resistant output connectors
• Oyster MM cartridge by SUMIKO
• Shock-absorbing insulating feet
• GND terminal
• RoHS compliant
• Included Accessories
• Felt Mat
• EP Adapter
• Counter Weight
• Head-shell (SUMIKO Oyster installed)
• Platter
• Dust Cover
• Hinges × 2
• RCA Audio cable with GND terminal
• AC Adapter (GPE036W-24015)
• Owner's Manual (including Warranty Card)

TURNTABLE FEATURES
• Type: Manual
• Drive method: Direct-drive
• Speed: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1%
• Built-in preamp: Yes
• S/N ratio: 67dB
• Cartridge: SUMIKO Oyster
• Cartridge type: MM
• Cartridge output: 4.0mV (1kHz)
• Tracking force: 2.3g
• Cartridge weight: 5.3g
• Including headshell: 15.3g
• Rec. cartridge weight: 4-13g
• Rec. cartridge weight (incl. headshell): 14-23g

AUDIO OUTPUTS
• Output level & impedance phono (MM): 4.0mV (1kHz)
• RCA: 1
• Output level & impedance RCA: 224mV (–13dBV)

ENERGY MANAGEMENT
• Power consumption (standby): 0.5W
• Power consumption: 2W
• AC adapter power
- Input: AC 100 V – AC 240 V, 50/60 Hz
- Output: DC 24 V, 1500 mA

DIMENSIONS AND WEIGHT
• Product height: 11.7cm
• Product width: 42cm
• Product length: 35.6cm
• Product weight: 6.1kg
• Packsize height: 24cm
• Packsize width: 52.5cm
• Packsize length: 43.8cm

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1210MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model. The SL-1200MK7 has also further unified the all black design scheme, even in every part, to become more stylish and attractive.

Premium Class Direct Drive Turntable System SL-1500C

The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge
Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

Simple Design with Functional Beauty
The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.

Specs:
• The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
• Complete Turntable with a Built-in Phono Equalizer and Cartridge
• Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
• Simple Design with Functional Beauty

Technical Data:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 and 78 r/min
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 % W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 2.0 kg (Including rubber sheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32'　(at the outer groove of 30 cm (12") record)
- Within 0° 32'　(at the inner groove of 30 cm (12") record)
• Applicable Cartridge Weight Range:
(without auxiliary weight):
- 5.6 - 12.0 g
- 14.3 - 20.7 g (including head shell)
(with auxiliary weight):
- 10.0 - 16.4 g
- 18.7 - 25.1 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1
- LINE (Pin Jack) x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2W (Standby)
• Dimensions (W x H x D): 453 x 169 x 372 mm
• Weight: Approx. 9.9 kg
• Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Cartridge(ortofon 2M Red), PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

SPECIAL FEATURES
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.

TD 202 Specification

Turntable section
• Drive System Belt Drive
• Motor DC Motor
• Speed 33 1/3 RPM, 45 RPM
• Rotation Speed Variation +/–2%
• Wow and Flutter 0.2%
• Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
• 60dB or higher (unweighted, 20kHz LPF)
• Platter Aluminum Die-cast
• Diameter of Platter 12", 300mm

Tonearm section Alumi tube
• Type Static Balance, Straight
• Effective Arm Length 8.8", 223.6mm
• Stylus Pressure Range 0 to 4g
• Supported Cartridge Weight 3.5 to 6.0g
• Overhang 18.6mm
• Anti-skating Adjustment Supported

Cartridge section
• Type MM type (Audio-Technica AT-95E)
• Stylus Construction Bonded Diamond
• Frequency Response 20Hz to 20kHz
• Channel Separation >18dB
• Channel Balance 2.5dB
• Vertical Tracking Angle 20 degrees
• Supported Load Impedance 47k ohms
• Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure 2.0g +/–0.5g
• Cartridge Weight 5.7g +/–0.5g
• Head-shell Weight 11g (including Screws, Nuts and Wires)

Analog Output
• Connector RCA Pin jack (Gold-plated)
• Power AC 100 to 240V, 50/60Hz
• Power Consumption 1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D) 420 x 355x 121mm
• Weight Approx. 3.9 kg

Manual: https://www.thorens.com/images/downloads/plattenspieler/202/TD202-User-Guide.pdf

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

• Crafted from high quality materials and components
• Pre-mounted Ortofon OM5E Cartridge
• Pre-mounted Bluetooth 5.0 Module

Timeless Design
The Transparent Turntable is a reinvention of a classic vinyl record player, designed for a modern home and an ever evolving technology. The Transparent Turntable is meticulously crafted out of aluminium and tempered glass. It is a belt driven system with a built in phono stage, and a pre-mounted cartridge from Danish Ortofon.

• Cartridge: Ortofon OM5E (MM)
• Stylus: Elliptical Diamond

Modular
Just like all Transparent products the TT has a completely modular design. With the future in mind, it is made for flexibility, upgradability and repairability.

• Cartridge Mount: Standard ½ in
• Headshell Mount: Standard SME

Transparent Sound
The Transparent Turntable plays music to any sound system, but works best with a Transparent Speaker. It plays with effortless clarity and precision, and offers playback either through cable or Bluetooth.

• Wireless Module: Bluetooth 5.0
• Phono Stage: Built in (with on/off switch)

Technical Specifications:
• Nominal speeds: 33 ⅓ and 45 RPM
• Speed variance: 33: ±0.70% 45: ±0.60%
• Wow and flutter: 33: ±0.25% 45: ±0.25%
• Signal to noise: ≥ 70dB at 1kHz, 0dB A-weighted
• Frequency range: 20-25.000Hz +3 / -3
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.5-2.0 g (15-20 mN)
• Tracking force, recommended: 1.75 g (17.5 mN)
• Tracking angle: 20°
• Replacement stylus unit: Ortofon Stylus 5E
• Effective tonearm mass: 13.5g
• Effective tonearm length: 220mm / 8.7in
• Overhang: 19.5mm / 0.77in
• Max power consumption: 15W
• Dimensions (W x H x D): 410 x 125 x 320 mm / 16 x 5 x 13 in
• Weight: 6,5kg / 14lb
• Dimensions packaging (W x H x D): 580 x 240 x 460 mm / 23 x 10 x 19 in
• Weight incl. packaging: 7,0kg / 15lb
• Rated input voltage: 100~240Vac, @ 50/60Hz.
• Bluetooth version: 5.0
• Normal or True Wireless (stereo) pairing
• 3.5 mm port for digital optical and analogue signals
• µUSB port for 5V power
• RX and TX mode (switch)
• Chip: Qualcomm CSR8670C
• Codec: aptX LL / SBC / MP3 / AAC
• Low Latency: <40ms
• Gold-plated contacts for perfect signal transmission

The UDG Turntable Dust Cover Black made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your turntable from from dust and liquid drops.
Size: approx.cm: 49 x 39 x 16 | inch: 19.3 x 15.3 x 6.3
Fabric: water-resistant nylon 210D.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

EAN 8718969212021
Color Black
Weight 3,05 kg / 6.71 lbs
Outer Dimensions (W x H x D) 40.1 x 32.1 x 19.5 cm | 15.8 x 12.6 x 7.7 inch
Inner Dimensions (W x H x D) 38.1 x 30.1 x 17.3 cm | 15.0 x 11.8 x 6.8 inch
Material Aluminum
Protection Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & egg-crate foam on lid
Two side strong butterfly lock
Rubber feet at the bottom for support in standing
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Removable front access panel
Fits Numark PT-01 Scratch Turntable USB, Party Mix, M6 USB, M2, NDX500, DM950,
Pioneer DDJ-200, DDJ-SP-1, DDJ-WeGO4, DDJ-XP2, CDJ-350, CDJ-850-K, DJM-S3, DJM-250MK2, DJM-350, DJM-450, DJM-750MK2, XDJ-700,
NI Maschine Jam, Maschine Mikro MK3, Maschine MK2/ MK3, Traktor Z2,
Ableton Push 2,
Akai MPC One, MPD226, MPK Mini MK2,
Allen & Heath Xone 23 / C,
Arturia DrumBrute Impact, MicroFreak, Minilab,
Elektron Analog Rytm,
Gemini CDJ-300, FirstMix I/O, FirstMix Pro,
Hercules DJControl Inpulse 200, DJControl Instinct, DJControl Starlight, P32 DJ Controller
Livid CNTRL:R,
Mixars DUO MKII,
Novation Launchkey Mini MK3, Launchpad Mini MK3, Launchpad MK2, Launchpad Pro MK3, Launchpad X,
Reloop KUT, Spin,
Roland K-25m, MC-202, TR-707
Stanton CMP800
or similar size cd players and mixers

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g