Turntables 128 Items

• Crafted from high quality materials and components
• Pre-mounted Ortofon OM5E Cartridge
• Pre-mounted Bluetooth 5.0 Module

Timeless Design
The Transparent Turntable is a reinvention of a classic vinyl record player, designed for a modern home and an ever evolving technology. The Transparent Turntable is meticulously crafted out of aluminium and tempered glass. It is a belt driven system with a built in phono stage, and a pre-mounted cartridge from Danish Ortofon.

• Cartridge: Ortofon OM5E (MM)
• Stylus: Elliptical Diamond

Modular
Just like all Transparent products the TT has a completely modular design. With the future in mind, it is made for flexibility, upgradability and repairability.

• Cartridge Mount: Standard ½ in
• Headshell Mount: Standard SME

Transparent Sound
The Transparent Turntable plays music to any sound system, but works best with a Transparent Speaker. It plays with effortless clarity and precision, and offers playback either through cable or Bluetooth.

• Wireless Module: Bluetooth 5.0
• Phono Stage: Built in (with on/off switch)

Technical Specifications:
• Nominal speeds: 33 ⅓ and 45 RPM
• Speed variance: 33: ±0.70% 45: ±0.60%
• Wow and flutter: 33: ±0.25% 45: ±0.25%
• Signal to noise: ≥ 70dB at 1kHz, 0dB A-weighted
• Frequency range: 20-25.000Hz +3 / -3
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.5-2.0 g (15-20 mN)
• Tracking force, recommended: 1.75 g (17.5 mN)
• Tracking angle: 20°
• Replacement stylus unit: Ortofon Stylus 5E
• Effective tonearm mass: 13.5g
• Effective tonearm length: 220mm / 8.7in
• Overhang: 19.5mm / 0.77in
• Max power consumption: 15W
• Dimensions (W x H x D): 410 x 125 x 320 mm / 16 x 5 x 13 in
• Weight: 6,5kg / 14lb
• Dimensions packaging (W x H x D): 580 x 240 x 460 mm / 23 x 10 x 19 in
• Weight incl. packaging: 7,0kg / 15lb
• Rated input voltage: 100~240Vac, @ 50/60Hz.
• Bluetooth version: 5.0
• Normal or True Wireless (stereo) pairing
• 3.5 mm port for digital optical and analogue signals
• µUSB port for 5V power
• RX and TX mode (switch)
• Chip: Qualcomm CSR8670C
• Codec: aptX LL / SBC / MP3 / AAC
• Low Latency: <40ms
• Gold-plated contacts for perfect signal transmission

Providing unbeatable accuracy! The Stroboscope Testrecord together with the Speed Light V2 give the best results in adjusting your turntable speed.

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord%20+%20Speedlight_E+D.pdf

Quartz controlled 300 Hz light source

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Compatible with the Stroboscopic Test Record:
The clearaudio Speed Light V2 is perfectly tuned for use with our Stroboscopic Test Record.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Speed%20light%20V2_E+D.pdf

Premium Class Direct Drive Turntable System SL-1500C

The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge
Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

Simple Design with Functional Beauty
The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.

Specs:
• The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
• Complete Turntable with a Built-in Phono Equalizer and Cartridge
• Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
• Simple Design with Functional Beauty

Technical Data:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 and 78 r/min
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 % W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 2.0 kg (Including rubber sheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32'　(at the outer groove of 30 cm (12") record)
- Within 0° 32'　(at the inner groove of 30 cm (12") record)
• Applicable Cartridge Weight Range:
(without auxiliary weight):
- 5.6 - 12.0 g
- 14.3 - 20.7 g (including head shell)
(with auxiliary weight):
- 10.0 - 16.4 g
- 18.7 - 25.1 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1
- LINE (Pin Jack) x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2W (Standby)
• Dimensions (W x H x D): 453 x 169 x 372 mm
• Weight: Approx. 9.9 kg
• Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Cartridge(ortofon 2M Red), PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Omni Portable Turntable Tone Arm Tension Mod by Tiny Steppa

Enhance Durability. Unleash Potential.

"The tone arm tension design in the Omni is actually very simple, with the two rubber bands doing their job well. However, we're aware that rubber bands can become hard and lose elasticity over time, much like changing a platter belt after a long while. This modification gives you an option to enhance durability, and elevate Omni's potential."

Easy stylus weight adjustment: Fine-tune the stylus weight with your fingertips.
Tone arm protection: Nylon screws prevent tonearm coating damage during setup.
Simple installation: Quick and user-friendly assembly.
Tool kit included: All necessary tools are in the package.
Omni certified: Meets quality and compatibility standards.

Installation video can be found here:
https://www.youtube.com/watch?v=ctHskU8k67c

Watch the adjustment video here:
https://www.youtube.com/watch?v=TDKhq1hTC3s

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

Record clamp.
LP-clamping unit with resonance absorbing locking unit and stainless steel grip.
Weight: 190 g

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black/silver turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

PREMIUM BELT DRIVE USB TURNTABLE SYSTEM

HIGHLIGHTS:
Belt-driven HiFi turntable with Ortofon 2M Red
20 mm acrylic platter with LED lighting
Decentralised drive motor with external belt guide

SOUND MEETS DESIGN
The Turn 7 bridges the gap between high-end HiFi turntables and uncompromising design. The belt-driven turntable meets the exacting demands of audiophile music fans thanks to precisely manufactured components. The acrylic platter with LED lighting and the external drive belt make the Turn 7 an absolute eye-catcher.

POWERFUL AND STEADY DRIVE
A decentralised, low-vibration DC motor drives the Turn 7. The integral flat belt runs gracefully along the turntable exterior, ensuring smooth operation and a sophisticated appearance. The start/stop rotary switch allows you to select between the turntable's two speeds (33 and 45 RPM).

HEART OF ACRYLIC: THE TURNTABLE PLATTER
The acrylic platter is 20 mm thick, weighs 1.7 kg, and has outstanding evenness thanks to precision manufacturing. It also has excellent antistatic characteristics. As a result, crystal-clear audio is possible without using a platter mat. The satin finish of the material creates a focal point and contrasts with the otherwise plain design of the belt-driven turntable.

LET THERE BE LIGHT – LEDS INSIDE
One of the unique features of the Turn 7 is the optional, blue platter illumination. Inconspicuously placed beneath the platter, multiple LEDs with a diffuser cover sets the mood and creates a warm and inviting ambience.

TOP-CLASS TONE ARM
The high-quality carbon tone arm has exceptional acoustic properties. The turntable's authentic sound is brought out to its full potential by effectively cancelling out vibrations. The ability to adjust the height (vertical tracking angle – VTA) and an anti-skating adjustment ensure maximum precision.

ORTOFON 2M RED PRE-INSTALLED
The turntable comes with the Ortofon 2M Red cartridge system pre-installed. The Ortofon 2M Red has an elliptical stylus tip and excellent sonic characteristics, including first-rate sound accuracy and reproduction. The Ortofon 2M Red is a highly versatile cartridge system with an open, dynamic sound and warm tones. The universal headshell connection (SME) adds more options for cartridge systems.

METICULOUSLY PERFECTED
In addition to its high-quality preamplifier, the Turn 7 also features versatile switching between line and phono signals. The gold-plated corrosion-resistant RCA connectors ensure the best possible signal transmission. The built-in USB output allows you to digitise vinyl records.

SIMPLE DESIGN & PURE FUNCTIONALITY
The sturdy MDF wooden plinth and height-adjustable isolator feet with aluminium surround provide effective decoupling for the turntable. The high-gloss piano lacquer is a classy contrast to the timeless minimalism while emphasising the Turn 7's superior quality.

FEATURES:
• Premium belt-driven HiFi turntable
• Decentralised DC motor with external drive belt on the acrylic platter
• Fully manual operation with motor control switch for switching between speeds (33/45 RPM)
• Precision-machined, 20 mm thick solid acrylic platter (1.7 kg) with outstanding levelling and electrostatic properties for a crystal-clear sound
• Indirect blue LED lighting on the acrylic platter (can be switched on/off)
• Audiophile carbon tonearm with height adjustment (VTA) and anti-skating adjustment
• Pre-installed Ortofon 2M Red cartridge for optimised sound reproduction and fidelity
• Universal headshell connection (SME) for additional flexibility
• USB recording function: Recording and digitisation of vinyl via the simply USB connection for PC/Mac
• High-quality integrated preamp (switchable phono/line output)
• Gold-plated, corrosion-resistant audio connections (removable power and RCA cable)
• Height-adjustable, shockproof aluminium feet for effective decoupling
• Solid MDF plinth with piano finish and a timeless design
• Incl.: dust cover, 2x hinges, felt mat, international power supply (UK/EU/US), RCA cable, headshell with Ortofon 2M Red (pre-installed), 7" aluminium adapter, acrylic turntable platter, allen key, USB-cable, instruction manual & counterweight

TECHNICAL SPECIFICATIONS:
Turntable Section:
• Type of turntable: Belt-Driven manual Turntable System with USB Interface
• Drive: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45
• Starting Torque: //
• Start-up time / rpm change: //
• Wow and Flutter: 0,2% WRMS
• S/N Ratio: >45dB or higher
• Breaking System: Manually
Turntable Platter:
• Turntable Platter: Acrylic glass
• Diameter: 300 mm
• Weight: 1.7 kg
Tonearm Section:
• Type: Straight Tonearm
• Effective Length: 223.6 mm
• Overhang: 18.61 mm
• Tracking Error Angle: ±1.5°
• VTA Adjustment Range: - 2 ~ 4 mm
• Applicable Cartridge Weight: 7.2 ~ 11.2 g (incl. Headshell)
• Anti-Skating Range: 0 - 4 mm
• Terminals: 1x PHONO/LINE Out
Cartridge:
• Ortofon 2M Red
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 µ Mm
• Compliance, dynamic, lateral: 20 µ Mm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 24.7°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g
General:
• Power Supply: 12V, 1A DC
• Power consumption: 12W
• Dimensions: 420(W) x 356(D) x 148(H) mm
• Weight: 8.2 kg

The THORENS TD 204 was developed for the audiophile beginner. A turntable with sound expansion potential for audiophiles.
The surface finishes "black high gloss" and "walnut high gloss" fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.

The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9" J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.

The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.

The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.

The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.

SPECIAL FEATURES:
• Smooth running belt drive
• Thorens TP 120 9” tonearm with J shape
• Detachable headshell with SME connector
• Switchable MM phono preamplifier
• Die-cast aluminum platter
• Pre-installed Audio Technics AT95E cartridge

MANUAL HIFI-TURNTABLE

For decades, direct-drive turntables from Dual have been renowned for their quality and reliability. The rumble free direct-drive in the CS 618Q keeps the RPM totally stable, while operating without noise or vibration.

The advanced twin gimbal precision tonearm is partnerd with an Ortofon 2M Blue pickup.

The turntable comes with an auto-stop feature that includes an automatic tonearm lift to reduce wear and tear on the needle as it moves to the end of the record.

DETAILS:
Plinth: Solid MDF
• Surface Options: Vinyl veneer, Gloss paint, Walnut veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dustcover

Platter: Aluminium Die-cast
• Heavy aluminium die-cast platter
• Heavy rubber mat for resonance damping
• Hardened steel spindle integrated into the direct-drive

Tonearm: Twin Gimbal Design
• Autostop function with an automatic tonearmlift
• Solid aluminium construction with precision pivot ball-bearing
• Adjustabel trackingforce and antiskating

Drive: Direct-drive
• Quartz stabilised, high end direct-drive
• No vibrations through coreless inductors
• Double shielded Rotormagnets to eliminate any stray magnetic fields

TECHNICAL DATA:
Drive:
• Drive: Direct-drive
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,07 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Auto-Stop / Auto Tonarmlift
• Bearing: 4 x Pivot ball-bearing /twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Blue

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 1450 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 7 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-618Q_manual_V6_DE_EN.pdf

STANTON STX
LIMITED EDITION PORTABLE SCRATCH TURNTABLE
RAZOR SHARP CUTS, RIGHT AWAY

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivaled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

SCRATCH WHENEVER, WHEREVER
Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use.
The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB-C input. For extended scratch sessions, the USB-C input can also be used with external power sources for even more cutting time.
To top everything off (literally), the latching lid also functions as a stackable, latching base, to bring the STX to standard turntable height.

WELL-CONNECTED FOR CREATORS
Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8” stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

PERFORMANCE READY
The modification culture is alive and well in the portablism world. Since the inception of this art form, we’ve seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Technical Specifications
Connections (1) RCA line-level output (stereo pair)
(1) 1/4” (6.35 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo headphone output
(1) 1/8” (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recordings

Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power (2) 3.7V Li-ion batteries

Dimensions
(width x depth x height)
13.0” x 13.0” x 4.0” (3.25” without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)

Weight 5.3 lbs.
2.4 kg

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

Premium HiFi turntable with Ortofon 2M Blue cartridge

DESIGNED WITH PRECISION FROM THE OUTSET
The Turn X's direct-drive DC motor offers incredibly accurate and consistent speeds. The high torque ensures lightning-fast start-up times and minimal variances of just +/-0.03%. The Turn X excels when operated in full manual mode, where its electronic brake and rotary switch for smooth starting and stopping, which also doubles as a speed selector (33, 45 and 78 RPM), shine.

BALANCE PERFECTION
A solid aluminium block supports the record player's precision-machined die-cast platter. Its hefty 2.1 kg, 332 mm diameter and 22.5 mm thickness ensure smooth, even movement. The damping rubber coating on the back of the turntable and the rubber mat provide excellent isolation properties and minimise vibrations.

AUDIOPHILE TONEARM
The statically balanced S-shaped tonearm can be adjusted in height to change the cartridge's azimuth (the angle at which the needle approaches the record) and the record's vertical tracking angle (VTA). The tonearm design guarantees free and fluid movement and optimum cartridge performance.

CRYSTAL CLEAR SOUND QUALITY
The Turn X has a high-quality Ortofon 2M Blue cartridge pre-installed, ensuring excellent dynamics and sound resolution to satisfy even the most discerning audiophiles. Another highlight: The universal SME connector enables a quick and easy cartridge system change if required.

SOUND AND NOTHING BUT SOUND
The turntable's solid MDF chassis is exceptionally sturdy and robust, keeping unwanted resonances at bay from the outset. As a bonus, the Turn X is effectively decoupled thanks to the height-adjustable isolator feet.

DESIGN WITHOUT COMPROMISE
In addition to meeting the exacting demands of vinyl enthusiasts, the Reloop Turn X is a true visual showpiece. The record player's sleek design, sophisticated one-button control, and classy piano lacquer finish make it a real eye-catcher.

ATTENTION TO DETAIL
Last but not least, the Turn X features a gold-plated high-resolution phono output and a gold-plated ground connector for optimum signal transfer and corrosion resistance. Interference is reduced even further by the power switch's ultra-low noise insulation.

FEATURES:
• Quartz-controlled, premium HiFi turntable
• Super high torque, direct drive DC motor with ultra-precise rotation speed
• Extra-heavy, CNC machined 22,5 mm thick aluminium platter with rubber damping
• Quick start-up and drift-off rotation speed less than +/-0.03%
• Full manual operation with motor control-switch to select three different speeds (33, 45 and 78 RPM)
• Precision machined, extra heavy aluminium die-cast platter for a perfectly balanced rotation (305 mm diameter, 22.5 mm thick, 2.1 kg)
• Deadening rubber covering rear platter surface & special 5 mm rubber mat for optimized resonance control and damping
• Sunk-in platter cavity construction
• Static-balanced S-shaped tonearm with VTA adjustment
• Adjustable anti-skating wheel for optimal pick-up tracking
• Pre-installed Ortofon 2M Blue cartridge for excellent dynamics and sound resolution
• Universal headshell connector (SME) provides added flexibility
• Counterweight supplied supports a wide variety of cartridges
• Premium, high-resolution audio phono outputs (with separate grounding connection)
• Gold-plated, corrosion-resistant audio connections (detachable power and RCA cables)
• Built-in switching power with ultra-low noise isolation design
• Rigid construction, with extra-heavy, solid MDF wooden plinth
• Height-adjustable, shock-resistant insulator feet for effective decoupling
• Timeless design with high-gloss, black piano finish
• Accessories included: Turntable platter, dust cover, 2x dust cover hinges, balance counterweight, Phono RCA cable with grounding cable, AC power cord, rubber mat, instruction manual, Ortofon 2M Blue cartridge & headshell

TECHNICAL DATA
Turntable Section:
• Type of turntable: Direct drive, fully manual
• Drive: Quartz driven upper-torque direct drive with precision rotation
• Motor: DC Motor, 16-Pole, 3-Phase, brushless
• Rotation speeds: 33 1/3, 45 & 78 RPM
• Starting Torque: More than 4500 g/cm
• Start-up time / rpm change: Less than 0.3 sec.
• Wow and Flutter: Less than 0.1% WRMS (JIS WTD)
• S/N Ratio: More than 60dB (DIN-B)
• Breaking System: Electronic brake

Turntable Platter:
• Turntable Platter: Aluminium die-cast
• 305 mm diameter
• Weight About 2.1 kg

Tonearm Section:
• Type: Static balanced S-Shape
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle: Less than 3 degrees
• VTA Adjustment Range: 0-6 mm
• Applicable Cartridge Weight: 17 – 25 g (incl. Headshell)
• Anti-Skating Range: 0-3 g
• Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal

Cartridge:
• Type of cartridge: Ortofon 2M Blue
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 25 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 80 µm
• Compliance, dynamic, lateral: 20 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Blue
• Cartridge weight: 7.2 g

General:
• Power Supply: AC IN 100~240V, 50/60 HZ
• Power consumption: 3W
• Dimensions: 460(W) x 367.3(D) x 172.6(H) mm
• Weight: 10.35 kg
• Incl.: dust cover + 2x hinge, rubber mat, power supply cable, RCA cable with grounding connection (gold-plated), Headshell with Ortofon 2M Blue (pre-installed), turntable platter, operation manual & counterweight

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Premium HiFi-turntable with digital USB-Audio Interface.

• Authentic HiFi turntable with digital USB-Audio Interface
• Pre-installed Ortofon 2M Red cartridge
• Low-vibration DC motor

Over 25 years experience
With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.

Quiet DC drive
The heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.

Electronic speed control for 33, 45 & 78 rpm
The TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.

Revised tonearm construction
The redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience.

Anti-skating wheel
The anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.

Headshell connection
The headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.

USB recording function
The integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.

Semi-automatic stop
With the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.

Shock-absorbing feet
Decoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal.

Precision-manufactured die-cast aluminium turntable
The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.

Solid base with piano finish
The sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image.

Immediate listening pleasure with hi-tech Ortofon cartridge
The TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.

Gold-plated connections
The gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.

High-end pre-amplifier
Equipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.

A class of it's own
The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

SPECIFICATIONS
FEATURES:
• Authentic HiFi turntable with precision belt drive
• Supplied with pre-assembled Ortofon 2M Red cartridge
• Optimised tonearm design for optimal tracking accuracy with flexible SME mounting
• Integrated high-quality preamplifier, can be switched on/off (phono/line output)
• USB recording function: recording and digitalisation of vinyl via simple USB connection for PC/Mac
• Semi-automatic stop function (can be activated optionally)
• Manual tonearm lift for analogue playback pleasure
• Low-vibration DC motor
• Integrated motor control with large speed selector switch (33/45/78 RPM)
• External DC power supply for trouble-free operation (100-230 V / 12 V / 500 mA)
• Precision-machined die-cast aluminium platter for resonance optimisation
• Infinitely adjustable anti-skating system with rotary wheel for optimum tracking accuracy
• Gold-plated, anti-corrosion connectors (all cables removable)
• Special turntable feet for effective decoupling
• High-gloss piano-finish cabinet
• On/Off switch on the back of the unit
• Incl. Ortofon 2M Red cartridge pre-mounted on headshell, counterweight, dust cover incl. hinges, felt mat, aluminium turntable, 7" aluminium adapter, RCA & USB cable and international power supply (UK/EU/US)

TECHNICAL DATA
TURN 3 MK2:
• Type of turntable: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45 & 78
• Wow and Flutter: 0.2% WRMS
• Analogue Output: Phono / Line, switchable
• Connections: RCA Audio output (gold-plated), USB type B
• Phono Output Level: 4.0 mV (with Ortofon 2M Red)
• Line Output Level: 224 mV (with Ortofon 2M Red)
• Tone Arm type: Straight
• Effective Arm Length: 223.6 mm
• Effective tonearm mass: 21.4 g
• Overhang: 18.6 mm
• Tracking force Range: 18 mN
• Platter diameter: 300 mm
• Anti-Skating adjustment: Yes
• Type of cartridge: MM (Ortofon 2M Red)
• Power consumption: 6W
• S/N: >60 dB or higher
• USB Audio Output with 48 kHz / 16-Bit
• USB Funktion: USB rec. function
• Supported Operating System: Windows & Mac
• Dimensions: 450 x 352 x 138.7 mm (incl. Dust cover)
• Weight: 6.5 kg

ORTOFON 2M RED:
• Output voltage at 1000 Hz, 5cm/sec.: 5,5 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 μMm
• Compliance, dynamic, lateral: 20 μMm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μMm
• Tracking force range: 1,6-2,0g (16-20 mN)
• Tracking force, recommended: 1,8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1,3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g

Manual: https://www.reloop-hifi.com/media/productattach/t/u/turn3mk2_im.pdf

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

New motor, developed exclusively for direct-drive turntables

The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.

Knife-edge, pivot-point tonearm bearings

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).

Precision anti-skating and stylus-pressure adjustment

As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.

Pre-installed Oyster cartridge by SUMIKO

The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.

Built-in PHONO EQ amplifier supporting MM cartridges

The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.

Die-cast aluminium platter

In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.

Insulating feet with excellent shock absorption

The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.

2-speed turntable for 33-⅓ and 45 rpm

The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Features at a glance:
• Direct-drive analog turntable
• Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
• Die-cast aluminium platter
• Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
• Multi-layer piano black or natural walnut veneer finish
• Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
• Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
• 2-speed drive offering 33-⅓ and 45 rpm
• Gold-plated oxidation-resistant output connectors
• Oyster MM cartridge by SUMIKO
• Shock-absorbing insulating feet
• GND terminal
• RoHS compliant
• Included Accessories
• Felt Mat
• EP Adapter
• Counter Weight
• Head-shell (SUMIKO Oyster installed)
• Platter
• Dust Cover
• Hinges × 2
• RCA Audio cable with GND terminal
• AC Adapter (GPE036W-24015)
• Owner's Manual (including Warranty Card)

TURNTABLE FEATURES
• Type: Manual
• Drive method: Direct-drive
• Speed: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1%
• Built-in preamp: Yes
• S/N ratio: 67dB
• Cartridge: SUMIKO Oyster
• Cartridge type: MM
• Cartridge output: 4.0mV (1kHz)
• Tracking force: 2.3g
• Cartridge weight: 5.3g
• Including headshell: 15.3g
• Rec. cartridge weight: 4-13g
• Rec. cartridge weight (incl. headshell): 14-23g

AUDIO OUTPUTS
• Output level & impedance phono (MM): 4.0mV (1kHz)
• RCA: 1
• Output level & impedance RCA: 224mV (–13dBV)

ENERGY MANAGEMENT
• Power consumption (standby): 0.5W
• Power consumption: 2W
• AC adapter power
- Input: AC 100 V – AC 240 V, 50/60 Hz
- Output: DC 24 V, 1500 mA

DIMENSIONS AND WEIGHT
• Product height: 11.7cm
• Product width: 42cm
• Product length: 35.6cm
• Product weight: 6.1kg
• Packsize height: 24cm
• Packsize width: 52.5cm
• Packsize length: 43.8cm

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

Plug & Play-turntable for beginners with AT3600 cartridge and integrated Phono Pre

THORENS is expanding its range and is presenting another fully automatic turntable for all vinyl fans with the brand-new model TD 101 A.

The TD 101 A is the little brother of the TD 102A and open a completely new chapter in the field of fully automatic turntables from THORENS. The newly developed mechanics of the TD 101 A guarantee the lowest possible frictional resistance of all mechanical components.

The turntable comes with a newly developed aluminum tonearm, including the preassembled AT 3600 cartridge from Audio Technica. The switchable integrated phono preamplifier guarantees complete connectivity with all modern audio systems.

The TD 101 A is available in the color "black matt".

Specifications:
• Function: fully automatic
• Drive system: internal belt
• Motor: electronically controlled dc motor
• Speeds: 33-1/3, 45 rpm
• Speed select: electronically
• Platter: 12“ Die-cast aluminium
• Cartridge: Audio Technica AT3600
• Phono Pre: yes (switchable MM)
• Shut off: fully automatic
• Power supply: external mains adaptor (110-230 V, 50-60 Hz)
• Dimensions: 420 x 141 x 360 mm (W x H x D)
• Weight: 5,4 kg
• Scope of delivery: mains adaptor, dust cover (acrylic), RCA interconnects, operating instructions

Equipment base

Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vib-rations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.

Suitable for:
• Elemental Line
• Essential Line
• Debut Line
• 1Xpression Carbon
• 1Xpression Carbon Classic
• RPM1 Carbon
• RPM3 Carbon

Features:
• Support platform for many turntables or other equipment
• Prevents the transmission of vibrations
• Heavy-weight MDF
• Conical feet with damping ring
• Height adjustable
• Combinable with Cover it E and Cover it RPM 1/3 Carbon
• High gloss piano finish

Technical Specifications:
• Dimensions: 480 x 51 x 390 mm spike feet incl.
• Weight: 4 kg

Equipment base

Ground it deluxe 1 suitable for:
• Xtension 9 Evolution, Xtension 10 Evolution, Xtension 12 Evolution
• Signature 10
• RPM 1 Carbon, RPM 3 Carbon, RPM 5 Carbon, RPM 9 Carbon, RPM 10 Carbon

Features:
• Resonance free placement for turntables & hifi
• Heavy weight base filled with granular damping
• 2 models with adjustable spikes (3 or 4 may be fitted)
• 1 model with height adjustable magnetic feet
• Dark grey piano lacquer finish
• Matches charcoal finish of Pro-Ject turntables

Technical Specifications:
• Dimensions: 500 x 65 (45)x 400 mm incl spikes (without spikes)
• Weight: 11,6 kg

MANUAL HIFI-TURNTABLE WITH FULL CARDAN TONEARM

For the true Vinyl Enthusiast, the CS 518 is equipped with a twin gimbal tonearm design using pivot ball-bearings for optimal precision.
This superior tonearm has the ability to guide even high end pickups with the greatest degree of precision and reliability.
The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Twin Gimbal Design
• Straight, statically balanced
• Solid aluminium construction with precision pivot ball-bearing
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: 4 x Pivot ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,9 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-518_manual_V4_DE_EN.pdf

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

This fully manual turntable is modeled after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.

Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.

The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

High-fidelity audio with Bluetooth® wireless technology

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable

Compatible with the high-quality Qualcomm® aptX™ audio codec

Built-in switchable phono preamplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor DC servo motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminum
Anlaufmoment >1.0 kgf.cm
Bremssystem Electronic brake
Gleichlaufschwankung <0.2% (WTD) @ 3 kHz (JIS)
Rauschabstand >50 dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
Phono-Vorverstärkung 36 dB nominal, RIAA equalized
USB-Funktionen A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above
Betriebsspannung 100 to 240 V, 50/60 Hz, 1.5A Max
Power Consumption 2.75 W
Abmessungen 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Gewicht 8 kg (17.6 lbs.), without dust cover
Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
Tonearm Type Balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5 mm
Overhang 16 mm
Tracking Error Angle Less than 3 degrees
Applicable Cartridge Weight 3.5-8.5 g
Anti-skating Range 0-4 g
Replacement Stylus AT-VMN95E
Communication System Bluetooth Version 5.0
Maximum Communication Range Line of sight - approx. 10 m (33')
Compatible Bluetooth Profile A2DP
Support Codec SBC, Qualcomm® aptX™ audio

Manual: https://www.audio-technica.com/media/wysiwyg/product/pdfs/eu/AT-LP120XBT-USB_UM_162501910_V2_EN_web_200826.pdf

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

The Gemini TT-4000 High Torque direct drive turntable features a redesigned chassis with reinforced cabinet construction. The TT-4000 uses a precision-machined die-cast aluminum platter for a stable stand in the club. The shock-absorbing rubber feet absorb shock or vibration during operation.

It is ideal for DJs, audiophiles and casual listeners alike. The 16-pole brushless 3-phase DC motor drives the TT-4000's direct drive. The turntable features precise pitch control of +/- 10%. A statically balanced S-shaped tonearm features a hydraulic lift and anti-skate mechanism.

For those who want to digitize their record collection, the Gemini TT-4000 offers a USB port for connection to PC/Mac. This way you can easily record and digitize your vinyl albums.

Thanks to a built-in phono preamp that allows for a line-level output, the TT-4000 does not require grounding.

Features:
• Direct drive turntable with very powerful torque
• Ideal for DJing, listening to music or digitizing
• USB port for connection to PC/Mac
• Very strong torque of 4.5 kg/cm
• Balanced tonearm in S-shape
• Damped rubber feet absorb shocks and vibrations
• Phono preamp with line output built in - no grounding required
• Pitch control of +/- 10%

Technical data:
• Direct driven DC motor with high torque (4.5 kg/cm)
• Signal-to-noise ratio: 40 dB
• Turntable weight: 523 g
• Pitch adjustment: +/- 10%
• Audio interface: USB 2.0 | sampling rate: 48k, 44.1k, 16 bit
• Power consumption: approx. 5.5 W
• Power supply: AC 115V - 60Hz | 230V - 50Hz
• Weight: 6.35 kg
• Dimensions (W x D x H): 490 x 315 x 262 mm

Scope of delivery:
• Gemini TT-4000 Turntable
• Power cable
• RCA cable
• Headshell with pickup/stylus
• Slipmat
• 45 adapters
• User manual & warranty information
• Audacity Software CD V2.1.3

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

Reloop - Abdeckhaube / Dust Cover RP-7000/8000/+MK2

FEATURES
Hinged dust cover
Suitable for Reloop RP-7000/8000 MK1 and MK2
Sturdy rigid plastic cast
TECHNICAL DATA
Dimensions: 452 x 58 (75 tone arm base) x 348 mm (358 hinge seat)
Incl. mounting hinges

OFFERED IS JUST THE DUST COVER WITHOUT TURNTABLE!

Experience analog music like you never have before. We are very excited about the new function of the C6: It has a bluetooth out function! Now it’s possible to connect our sleek designed record player to your speakers for the best possible sound experience.
It's a beautiful matt-black piece with aluminium arm and platter, adjustable weight, Diamond NP5 needle and dustcover.

• 2-speed turntable
• Plays 7”, 10” or 12” records
• NP5 diamond needle
• Bluetooth out
• Belt-driven
• RCA out
• EU & UK AC Power adapter
• Low vibration Synchronous motor
• Adjustable tonearm weight
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Built-in amplifier
• Dimensions: 42 cm (l), 36 cm (w), 12.5 cm (h)
• Weight: 6,2 kg

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:

T1 with Ortofon OM 5E cartridge
Directly soldered Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Belt-driven
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Included accessories dustcover, feltmat
Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
Power consumption 3 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-Manual.pdf

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf