Turntables 290 Items

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

MANUAL HIFI-TURNTABLE

For decades, direct-drive turntables from Dual have been renowned for their quality and reliability. The rumble free direct-drive in the CS 618Q keeps the RPM totally stable, while operating without noise or vibration.

The advanced twin gimbal precision tonearm is partnerd with an Ortofon 2M Blue pickup.

The turntable comes with an auto-stop feature that includes an automatic tonearm lift to reduce wear and tear on the needle as it moves to the end of the record.

DETAILS:
Plinth: Solid MDF
• Surface Options: Vinyl veneer, Gloss paint, Walnut veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dustcover

Platter: Aluminium Die-cast
• Heavy aluminium die-cast platter
• Heavy rubber mat for resonance damping
• Hardened steel spindle integrated into the direct-drive

Tonearm: Twin Gimbal Design
• Autostop function with an automatic tonearmlift
• Solid aluminium construction with precision pivot ball-bearing
• Adjustabel trackingforce and antiskating

Drive: Direct-drive
• Quartz stabilised, high end direct-drive
• No vibrations through coreless inductors
• Double shielded Rotormagnets to eliminate any stray magnetic fields

TECHNICAL DATA:
Drive:
• Drive: Direct-drive
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,07 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Auto-Stop / Auto Tonarmlift
• Bearing: 4 x Pivot ball-bearing /twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Blue

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 1450 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 7 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-618Q_manual_V6_DE_EN.pdf

UNCOMPLICATED WITH COMFORT
The CS 529 combines ease of use of a fully automatic turntable with high-end solutions such as precision pivot ball-bearings in a twin gimbal tonearm.

The operation is just as straight forward as every automatic turntable; the tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

All turntable functions can be controlled via the terminal or remotely operated via the Bluetooth signal, which also transmits the music data. The relevant app can be installed on any smart device to enable you to control the entire turntable remotely. This is the first product world-wide with such a feature.

DETAILS:
Plinth: Solid MDF
• Subchassis construction with rubber dampers
• Bluetooth for audio and remote-control functions
Platter: Aluminium
• Aluminium die-cast, long term precision
• Heavy rubber mat for resonance damping
• Hardened steel spindle in a brass bushing
Tonearm: Twin Gimbal Design
• All functions are fully automatic or manual
• Solid aluminium gimbal construction
• Pivot ball-bearings
Drive: DC- Motor / Belt
• Optical speed control at the motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Bluetooth Remote Control / Automatic
• Bearing: 4 x ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g bis 4 g
• Cartridge Weight Range: 5 g bis 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: Bluetooth Bluetooth 5.2 aptXT HD Audio.
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: D: 415 mm / H: 400 mm
• Weight: 6,7 kg
• Power plug AC / DC: External power supply

MANUAL HIFI-TURNTABLE WITH FULL CARDAN TONEARM

For the true Vinyl Enthusiast, the CS 518 is equipped with a twin gimbal tonearm design using pivot ball-bearings for optimal precision.
This superior tonearm has the ability to guide even high end pickups with the greatest degree of precision and reliability.
The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Twin Gimbal Design
• Straight, statically balanced
• Solid aluminium construction with precision pivot ball-bearing
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: 4 x Pivot ball-bearing / twin gimbal mounting
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,9 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-518_manual_V4_DE_EN.pdf

FULLY AUTOMATIC HIFI-TURNTABLE

The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button.

The CS 429 has a fully adjustable tonearm. This provides the option to change the pickup in the future and to alter the trackingforce and anti-scating accordingly.

The internal rubber damping construction decouples the tonearm and platter from external vibrations. This very quiet platform pro-vides an excellent sound performance combined with precise, optical speed control.

DETAILS:
Plinth: Solid MDF
• MDF construction with internal vibration absorber
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• All functions can be fully automatic or manual
• Solid aluminum construction with ball-bearings
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Precise optical speed control
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,08 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 6,2 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-429_manual_V4_DE_EN.pdf

THE MANUALRECORD PLAYER ENTRY

Emphasis on high component precision is a feature of the entire range of Dual products. This is the case for the entry model CS 418, which uses the same platform as the higher models in the product range.

The Ortofon 2M Red pickup and a switchable MM-phonopreamplifier are an integral part of this ready to run package.

The CS 418 is not attractive just because it is excellent value for money, but it also offers a superb and compelling balanced sound experience and a 5 year warranty for long term ownership.

DETAILS:
Plinth: Solid MDF
• Folded MDF construction with a black vinyl veneer
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover

Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
• Solid platterbearing with a hardened steel spindle in a brass bushing

Tonearm: Straight, statically balanced
• Solid aluminium construction with ball-bearings
• Damped tonearmlift
• Adjustable trackingforce and antiskating

Drive: DC- Motor / Belt
• Low vibration DC-Servo-Motor
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL DATA:
Drive:
• Drive: Belt
• Speed settings: 33/45/78
• Wow & Flutter: < ±0,1 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: ✕
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: 0 g to 4 g
• Cartridge Weight Range: 5 g to 9 g
• Factory installed pick up: Ortofon 2M Red

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle, Brass bushing
• Diameter: 305 mm
• Weight (incl. Mat): 850 g

Plinth:
• Material: MDF, folded
• Surface finish: Vinyl veneer / Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA socket
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 367 x 145 mm
• Dimension, open dustcover: T: 415 mm / H: 400 mm
• Weight: 5,8 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/07/BDA-CS-418_manual_V4_DE_EN.pdf

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

Now with 2-way Bluetooth!

The Bluetooth Voyager briefcase design record player stands out because of the sleek grill at the front where the two speakers are behind, waiting for you to turn up the volume. Get the best use out of your record player with the 2-way Bluetooth receiver. Use the Voyager as a Bluetooth speaker and listen daily to your digital music, or connect an external Bluetooth speaker for an amplified sound. The Voyager record player also comes with Pitch Control, Aux-in, Headphone jack and RCA output.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3 ¾”, 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

This record player with external speakers and its minimalistic design has a satisfying listening experience due to the aluminium platter, NP15 diamond needle and tone arm with adjustable counterweight. In combination with the Bluetooth function the T150 record player has everything you need.

• 2-speed record player
• Plays 7”, 10” or 12” records
• 2 external speakers - 4”, 4Ω, 15W
• NP15 diamond needle
• Belt-driven
• Pitch Control
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC power adapter
• Aluminium tonearm with adjustable counterweight
• Full-size aluminium platter
• Dimensions: 40.5 cm (l), 31.5 cm (w), 5.5 cm (h)
• Speakers: 13 cm (l) 15 cm (w) 20 cm (h)
• Weight: 3.3 kg

Spend a night listening to a rock opera on vinyl or one of the three other listening options the Rhapsody has to offer. This entertainment center comes equipped with a 3-speed turntable, CD player, AM/FM radio, and a built-in Bluetooth receiver so you can kick back and listen to your music however you’d like! The wood cabinet adds an elegant touch and features a matching lid with metal hinges to help keep dust out while not in use. Built-in stereo speakers sit behind a vintage-inspired fabric grill. With aesthetics inspired by vintage radios and elevated with golden accents, this piece will look like a piece of art on your shelf.

• 3-speed record player (33 1/3, 45 & 78 RPM)
• Plays 7”, 10” or 12” records
• 2 Built-in full-range stereo speakers | 3.5”, 8Ω, 5W
• Built-in Bluetooth Receiver
• NP6 needle
• Belt-driven
• Pitch Control
• Headphone Jack
• Cueing Lever
• CD Player
• AM/FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter

Dimensions: 35,3 cm (w), 17,8 cm (h), 43,21 cm (d)
Weight: 5.9 kg

Spare needle for the Cruiser Portable Turntable from Crosley.

Every once and a while you need to take care of your record player. This is the NP6 stylus replacement needle which is compatible for these record players:

• Cruiser Deluxe
• Voyager
• Lancaster

Crosley NP 6 Spare Needle - features:

• ABS Plastic Composition
• Stylus Needle
• plays 3 speeds - 33 1/3, 45 and 78 RPM records

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

The Jasper has sleek tapered legs and exquisite mid-century vibes. This record player delivers retro design with sound and functionality that’s 100% modern. The three-speed turntable includes all the bells and whistles: a built-in Bluetooth receiver, headphone jack, and aux input. And that deep walnut finish with gold accents? Pure perfection. With stunning dark looks and crystal-clear sound at a fantastic price, the Jasper is truly the total package.

Specifications:
• Turntable, plays 7", 10" & 12" records
• 2 built-in speakers
• Bluetooth in & Out
• Headphone Jack
• 45 RPM adapter
• Power adaptor 6V
• Aux-IN
• Np16 needle
• 4 Legs
• 38,1 cm (w), 66.6 cm (h), 35.5 cm (d)
• Weight: 6,35 kg

This neat record player with a wooden look will easily blend into any kind of interior. The Crosley Gig will be the centre piece in the room, but it’s still modest enough to leave space for the rest.
Round out your mid-century modern decor with functional art from Crosley. Inspired by furniture from the 50s and early 60s, the Gig’s minimalistic design features sleek rounded edges and a faux wood finish with a matte black front face for contrast. Three knobs on the front allow you to easily crank up the volume, adjust pitch, switch between vinyl, aux-in or the built-in Bluetooth receiver, letting you play digital music through the record player. Use the matching speakers or the RCA outputs on the back to easily integrate into your existing music system. The Gig is a complete two-speed turntable system that’s ready to jam right out of the box.

• 2-speed record player (33 1/3 & 45 RPM)
• Plays 7”, 10” or 12” records
• 2 external full-range stereo speakers - 3”, 8Ω, 5W
• Built-in Bluetooth Receiver
• Pre-Mounted Moving Magnet Cartridge
• NP5 diamond needle
• Belt-driven
• Adjustable Pitch Control
• Bluetooth input
• Aux in
• RCA out
• AC power adapter (EU & UK PLUG)
• Dimensions: 43 cm (l), 28 cm (w), 10 cm (h) | Speakers: 18 cm (l), 10 cm (w), 10 cm (l)
• Weight: 5.8 kg

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price.
Created with an eye for interior design the (ready to go, straight out of the box) C62 record player and speakers have a veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the design complete. You can pump up the volume because of the two great quality speakers and NP5 diamond needle.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price. Created with an eye for interior design this record player and speakers have a Walnut or Grey veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the upgrade complete.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

They say clothes make the [wo]man, but in this case, they also make the stereo. Outfitted in eye-catching heather grey fabric accented with walnut wood and silver accents, the Aria Shelf System is definitely dressed for success. The Aria is more than just a pretty face, though: the three-speed turntable boasts a built-in Bluetooth receiver, FM radio, and aux input, and the speakers deliver 2x25 watts of sound. Stunning looks and personality to match? We’re absolutely swiping right on the Aria Shelf System.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Built-in speakers | 1” 6Ω 5W x 2 + 4" 6Ω 20W x 2
• NP16 needle
• Belt-driven
• FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter output 15V 3A
• Turntable dimensions: 34,3 cm (w), 11,4 (h), 31 cm (d)
• Speaker dimensions: 16.5 cm (w), 24.7 cm (h), 18.4 cm (d)
• Weight: 7,09 kg

Record clamp.
LP-clamping unit with resonance absorbing locking unit and stainless steel grip.
Weight: 190 g

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

Providing unbeatable accuracy! The Stroboscope Testrecord together with the Speed Light V2 give the best results in adjusting your turntable speed.

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord%20+%20Speedlight_E+D.pdf

Quartz controlled 300 Hz light source

Enables exact adjustment of your turntable speed by keeping the light source independent from fluctuations in the mains frequency and voltage, which would otherwise give distorted results. A quartz oscillator generates an accurate 300 Hz, white light source, making precise speed adjustment easy when used in conjunction with the Clearaudio Stroboscopic Testrecord.

An optimal listening experience requires precise settings, especially when it comes to motor speed. The clearaudio Speed Light V2 is your key to accurate speed adjustments, regardless of the power grid frequency in your country. In this enhanced version, we present an upgrade for ultimate precision and user-friendliness.

New features at a glance:

White LED for improved visibility:
The transition from a blue LED to a white LED ensures an even better visibility of the line pattern on the stroboscopic disc. Every pulse is accurately captured, allowing for precise speed adjustments.

Extended operating time with a new battery:
The switch to the lithium button cell (CR2023) not only provides a longer operating time but also ensures a constant power supply for reliable performance. The Speed Light V2 does not have a rechargeable battery and operates only on a battery or continuous power.

New Micro-USB port for battery-independent operation:
The implementation of a Micro-USB port offers the option of battery-independent operation.

Aluminum casing:
The casing, milled from solid material and made of anodized aluminum, replaces the previous plastic, improving durability and adding an aesthetically pleasing element.

Compatible with the Stroboscopic Test Record:
The clearaudio Speed Light V2 is perfectly tuned for use with our Stroboscopic Test Record.

Manual: https://www.clearaudio.de/_assets/_pdf/manuals/accessories/CA_Speed%20light%20V2_E+D.pdf

Acrylic dust cover for Smart Matrix Silent.
Dimensions (W/D/H in mm): 340 x 340 x 75 (Outer dimension)

Record weight made of aluminum with an integrated Teflon bushing on the underside for smooth placement (332 g).

This high-quality accessory, available in silver or black anodized aluminum, is specifically designed for the Performance series and stands out with its stylish design and exceptional functionality. Of course, this weight can also be used with other Clearaudio models and other brands.

The Performance record weight features an integrated Teflon bushing on the underside, ensuring smooth placement and significantly easing handling. At the same time, the weight is softly decoupled from the spindle. With a precisely calibrated weight of 332 grams, it is tailored for turntables with CMB bearings and clearaudio DC motors, making it the perfect complement to these systems.

Additionally, the record weight is compatible with all radial tonearms as well as the TT5 tonearm, making it a versatile accessory for audiophiles and professional users alike.

Weight: 332 g

Record weight made of aluminum with an integrated Teflon bushing on the underside for smooth placement (332 g).

This high-quality accessory, available in silver or black anodized aluminum, is specifically designed for the Performance series and stands out with its stylish design and exceptional functionality. Of course, this weight can also be used with other Clearaudio models and other brands.

The Performance record weight features an integrated Teflon bushing on the underside, ensuring smooth placement and significantly easing handling. At the same time, the weight is softly decoupled from the spindle. With a precisely calibrated weight of 332 grams, it is tailored for turntables with CMB bearings and clearaudio DC motors, making it the perfect complement to these systems.

Additionally, the record weight is compatible with all radial tonearms as well as the TT5 tonearm, making it a versatile accessory for audiophiles and professional users alike.

Weight: 332 g

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

Level Gauge - Stainless steel
High precision gauge, calibrated.

Level Gauge - Basic
High precision gauge, calibrated.

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Acrylic dust cover for Concept Signature.
Dimensions (W/D/H in mm): 450 x 380 x 147 (Outer dimension)

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black/silver turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

The revolutionary concept combines the highest quality of music playback with a design that has won several awards worldwide – including the German Design Award and ‘Best Turntable’ award from ‘What Hi-Fi? Sound and Vision’ magazine. With the concept, to find an affordable entry point to the high-end world is a breeze. It reveals the magic of optimum sound reproduction even for those music lovers who could not previously afford this experience. You can buy the concept in a package with specially developed moving magnet (MM) or moving coil (MC) cartridges. A frictionless magnetic bearing tonearm is responsible for the optimal performance of the cartridges. All critical parameters from cartridge tracking weight to anti-skating are preadjusted in our factory. The concept represents the ideal of stress-free ‘plug and play’: unpack, connect, put the record on the platter – and just enjoy music. There was never more audiophile technology in this class of turntables.

The concept achieves these highest of requirements, realising the Clearaudio vision.

Beneath the sleek, contemporary exterior is a level of technical sophistication unique to Clearaudio.

The concept‘s body is carefully crafted from medium-density wood fibre (or, optionally, pressure-formed solid wood) with a selection of smart made-to-match surface finishes. The body’s upper layer incorporates a special high-tech satined plastic compound designed to minimise unwanted resonance.

The DC motor is fed by an external voltage-stabilised power supply and is completely decoupled from the chassis, isolating the record from any mechanical interference.

The concept tonearm features a magnetic bearing that is friction-free for extremely low distortion and superb performance. The package is completed with the high-quality Clearaudio CONCEPT MM or Clearaudio CONCEPT MC cartridge (toneam and/or cartridge upgrade possible).

With the concept turntable package, Clearaudio offers you an extremely innovative design that is very affordable.

Concept black turntable including concept tonearm and concept MM cartridge.
Upgrade for cartridge/tonearm possible.
(Delivery without dustcover)

FEATURES
Technical Specifications:
• CONSTRUCTION DETAILS: Resonance-optimised turntable; chassis comprises medium-density wood fibre (silver / black) or pressure-formed solid wood (wood / dark wood); upper layer incorporates high-tech satined plastic compound.
• SPEED OPTIONS: 33 ⅓, 45, 78rpm
• DRIVE UNIT: Decoupled and resonance damped 12V DC motor, flat belt-drive and plug-in power supply unit designed for worldwide use with all networks and power frequencies.
• BEARING: Polished and tempered steel spindle in a sintered bronze housing, running on a teflon thrust-pad.
• PLATTER: 30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined surface aluminium sub platter
• SPEED ACCURACY (MEASURED): ± 0.05%
• POWER CONSUMPTION: Max. consumption: 2.5 watts / Consumption in operation: 0.5 watts / Off mode: 0.0 watts
• TOTAL WEIGHT: Approx. 7.5kg (incl. tonearm and cartridge)
• DIMENSIONS (W/D/H): Approx. 16.54 × 13.78 × 4.92 inches (with tonearm) / Approx. 420 × 350 × 125mm (with tonearm)
• MANUFACTURER’S WARRANTY: 2 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/turntables/CA_Concept_E+D.pdf?d=1667911999

Moving Magnet Phono Preamplifier

Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Solo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Stage?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Solo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Solo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• GAIN @ 1KHZ: 39dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: 3.35mV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): ~0.09uV
• RIAA CURVE ACCURACY: +/- 0.65dB 30Hz-20kHz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): >90dB
• THD+N 1KHZ (20-20KHZ BW): <0.0025%
• INPUT IMPEDANCE: 47k Ohm
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @10KHZ: >85dB
• DIMENSIONS (H X W X D): 48x176x132 (1.9x6.9x5.2”)
• WEIGHT: 0.68kg/1.5lbs
• WHATS IN THE BOX: Alva Solo Moving Magnet Phono Preamplifier, User Manual, Safety Guide, Mains lead

Moving Coil & Moving Magnet Phono Preamp

Squeeze every inch of detail from your record collection with our highest quality moving magnet and moving coil phono stage, with integrated headphone amp; the Duo Phono Preamplifier.

Vinyl as it's Supposed to Sound
Whether you’re dusting off your record collection or embracing analogue through the vinyl revival, there’s a unique experience to be had from the moment you drop the needle on your favourite album. To preserve the unique warmth of the vinyl sound, the Duo phono preamplifier has been carefully designed with a state-of-the-art switch mode power supply and a new surface mounted circuit board layout to reduce unwanted noise.

Why Choose a Dedicated Phono Preamplifier?
Due to the low-level signals created by a turntable, not all hi-fi amplifiers will let you connect directly to a record player. The phono preamplifier boosts this signal to something a power amplifier can work with. The challenge at this stage though is that noise can easily be added.
This is why we’ve designed the Duo around exceptional components that deliver the warm and detailed sound that’s synonymous with vinyl, all without distorting the signal from your moving magnet cartridge turntable. The switch mode power supply improves performance by switching outside of audible frequency to drastically reduce hum and new circuit board layout uses surface-mount components to reduce noise.

Vinyl. Just for You
Enjoy the warmth of vinyl privately thanks to Duo’s integrated headphone output. Uniquely, we integrated a 6.35mm headphone jack directly into the phono stage, so you can still enjoy your records when there’s no option to play out loud.
The integrated headphone output also means no need to turn on your amplifier just to power your headphones, resulting in a more eco-friendly listening experience.

Attention to Detail
If some records in your collection are a little worse for wear, the subsonic filter will help to eliminate low frequency rumbles that can be caused by imperfections within your vinyl. Combine this with the balance control for handling potential cartridge imbalances in your record player (that can cause a difference between the left and right channels) and the result is a detailed experience with accurate soundstage.

Eco Friendly
The Duo phono preamplifier is green at heart with less than half a watt standby power consumption and auto power down feature if the unit isn’t used after a 20 minute period. This in turn gives the unit the same worldwide voltage for compatibility wherever you are in the world.

Technical specifications:
• MAX POWER CONSUMPTION: 10W
• CARTRIDGE SUPPORT: Moving Magnet | Moving Coil
• GAIN @ 1KHZ: MM: 39dB | MC: 60dB
• NOMINAL OUTPUT: 300mV
• SENSITIVITY FOR NOMINAL OUTPUT: MM: 3.35mV | MC: 305uV
• EQUIVALENT INPUT NOISE (A-WEIGHTED): MM: ~0.09uV | MC: ~0.08uV
• RIAA CURVE ACCURACY: +/- 0.3dB 30Hz-50Hz
• SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW): MM: >90dB | MC: >70dB
• THD+N 1KHZ (20-20KHZ BW): MM: <0.0025% | MC: <0.20%
• INPUT IMPEDANCE: MM: 47k Ohms | MC: 100 Ohms
• INPUT CAPACITANCE: 100pF
• OVERLOAD MARGIN: >30dB
• CROSSTALK @ 10KHZ: MM: >85dB | MC: 75dB
• DIMENSIONS (H X W X D): 48 x 215 x 159 mm (1.9 x 8.5 x 6.2")
• WEIGHT: 0.95kg (2.1lbs)
• WHATS IN THE BOX?: Alva Duo Moving Coil & Moving Magnet Phono Preamp, User Manual, Safety Guide, Mains Lead

Integrated Stereo Amplifier with (Built-in) Phono-Stage

• 35 Watts Power per Channel – for detailed performance at all volumes, ideal for smaller/medium sized rooms
• Built-In Phono Stage – to plug & play a vinyl turntable
• Slim Timeless Design – classic hi-fi size, with Lunar Grey aluminium trim
• Tone Controls – fine-tune sound to compensate for room dynamics
• Digital Display – white LED, clearly shows; source, volume & menus
• Headphone Socket – full size socket for high-quality after-hours listening
• Front Aux Input – 3.5mm socket to easily connect compatible devices

Sound Comes First
Our AXA35 integrated amp offers 35 watts per channel and has a built-in moving magnet phono stage – perfect for vinyl enthusiasts. A white LED dot matrix display confirms listening source, and separate tone controls mean you can adjust the sound to suit your taste. There’s a large ¼” (6.35mm) headphone socket too, ideal for high-quality listening without disturbing those who might not share your great taste in music.

Your Journey into Sound
AXA35 is the ideal amp to begin listening to music and really appreciating it – hearing detail in familiar tunes you’ve previously missed. That’s down to the toroidal transformer it uses, a tech found higher up our range. Choose a pair of speakers to suit your taste, perhaps they’ve been in the family for years or maybe something from our SX Series.

Release the Wheels of Steel
The built-in phono stage is the ace up AXA35’s sleeve. It means that you can plug a turntable straight in without any extra kit. Moving magnet (MM) compatibility means AXA35 works with a wide variety of turntables – including that vintage one you’ve had your eye on. Soon you’ll be playing the records you’ve been saving for, and planning what to buy next.

Setting the Tone
With separate bass and treble controls, you can fine-tune AXA35’s sound to suit your taste, speakers and room dynamics. The volume level is shown on the LED dot matrix display, and with 35 watts per channel you’ll have plenty of kick for smaller to medium sized rooms.

Wired for Sound
AXA35 is a well-connected amp, with no less than 4 pairs of RCA inputs, plus a pair of phono sockets for a turntable and a pair of recording outputs. There’s a rear USB socket for technical upgrades. Hi-fi quality speaker binding posts (connectors), compatible for banana plugs, mean that thick cable connects securely for an authentic sound.

Designed for Life
As with the rest of AX Series, AXA35 shares our house-style of Lunar Grey minimalist fascia, black steel cabinet and ‘floating’ base. This timeless look enables an upgrade path through our range. A slim build, in the classic 430mm hi-fi width, also means that AXA35 can easily slot, and breathe new life, into a much-loved system.

Technical specifications:
• POWER OUTPUT: 35 Watts (into 8 Ohms)
• THD (UNWEIGHTED): <0.01% @ 1kHz, 80% of rated power <0.15% 20Hz - 20kHz, 80% of rated power
• FREQUENCY RESPONSE (-3DB): 5Hz - 50kHz
• S/N RATIO (REF 1W): >82dB (unweighted)
• INPUT IMPEDANCES: 47k ohms
• POWER AMP DAMPING FACTOR: > 50
• MAX. POWER CONSUMPTION: 260W
• BASS/TREBLE CONTROLS: Shelving, ultimate boost/cut +/- 10dB @ 100Hz and 10kHz
• STANDBY POWER CONSUMPTION: <0.5W
• INPUTS: 4x RCA, 1x Phono, 1 x 3.5mm Aux input (front panel)
• OUTPUTS: Speakers, Rec Out, USB 5V power
• DIMENSIONS (HXWXD): 83 x 430 x 335mm (3.3 x 16.9 x 13.2”)
• WEIGHT: 5.6kg (12.3lbs)
• IN THE BOX: AXA35 Integrated Amplifier, Power Cable, Remote Control, 2 x AAA Batteries

Direct Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Direct Drive – Consistent drive speed with pitch-perfect audio reproduction.
• Pre-installed High-Output MC Cartridge – Pristine musical detail, custom design. Easy setup.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
You’ve spent years curating the perfect record collection, searching for hidden gems in record shops and online – because you love music. Our shared love means that we didn’t stop with Alva TT.
We pushed on to create Alva TT V2; with a direct drive system, bespoke MC cartridge, an all-new tone-arm, and Hi-Res Bluetooth with an integrated phono stage – both now switchable.
We believe that your records deserve to sound as fantastic as they look.

King of Convenience
Alva TT V2 is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. TT V2 comes with a bespoke designed cartridge pre-installed. It connects to pretty much any audio system too, thanks to a switchable integrated phono-stage. It even works wirelessly with high quality Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva TT V2 has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect TT V2 to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MC Cartridge Pre-installed
Alva TT V2’s bespoke cartridge is ready fitted – so there’s no tricky set-up, and its sound is perfectly matched to the other components in the turntable. We designed the high-output Moving Coil (MC) cartridge with an exposed cantilever. It reduces unwanted resonance and vibration, delivers high levels of gain and outstanding musical detail during playback.

Direct Drive
Alva TT V2 has a medium-torque Direct Drive motor, like its predecessor the TT. The 8 pole, 3 phase, brushless DC motor is quartz controlled to ensure accurate turntable speed. With precision control, and silent running, Alva TT V2 achieves just 0.06% wow and flutter. This means excellent pitch stability – particularly during longer, more sustained, musical notes.

Reassuringly Solid Platter
Complimenting the direct drive motor, Alva TT V2’s platter has the feel of finely polished stone. It’s made from Polyoxymethylene, a semi-crystalline thermoplastic used in precision engineering applications, where high stiffness and dimensional stability are demanded. The weight of the platter, coupled with our medium torque direct drive motor, ensures excellent speed stability during playback of records.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva TT V2 to endure, starting with a top plate hewn from 6mm aluminium plate, and layer of EVA to absorb vibration sitting on MDF. It’s cradled in a composite chassis and weighs an impressive 10.9kg. Reassuring solid construction, with great acoustic qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva TT V2 celebrates our timeless house-style. It’s the perfect match for our best-selling CX Series hi-fi separates and shares the laser-etched brand logo with our premium Edge Series.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Direct Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.1%
• TURNTABLE PLATTER: POM (Polyoxymethylene)
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 2.2kg
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 5.5W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.25W
• DIMENSIONS (W X H X D): 435 x 139 x 368mm
• WEIGHT: 10.9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: High Output Moving Coil
• CARTRIDGE FREQUENCY RESPONSE: *+/- 1dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Aluminium
• CARTRIDGE OUTPUT LEVEL: 2mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-tt-v2

Belt Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Belt Drive – With simple electronic push button speed control.
• Pre-installed Moving Magnet Cartridge – A well-regarded choice, play records in minutes.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
There’s nothing quite like vinyl: the tactile pleasure of removing a record from its sleeve and carefully placing it on a deck is unique. We designed the original Alva TT to honour that tradition, and Alva ST to share that pleasure with more people.
With a pre-fitted cartridge –so you’ll be playing records in minutes – the belt-drive Alva ST also features switchable Hi-Res Bluetooth streaming and integrated phono stage.
Everyone should be able to enjoy the freedom Alva brings.

King of Convenience
Alva ST is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. Alva ST keeps it simple with perfectly matched cartridge pre-installed. Alva ST connects to pretty much any audio system too, as it has a switchable integrated phono-stage. It even works wirelessly with Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva ST has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect Alva ST to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MM Cartridge Pre-installed
After hours of listening, we selected an Audio Technica Moving Magnet cartridge to be ready fitted on Alva ST. With no fiddly set-up you’ll be playing records in minutes. The elliptical stylus provides a greater contact area with your records’ grooves, producing accurate tracking of information and, of course, great sounding music.

Belt Drive
Alva ST uses the proven belt-drive method, supplemented with electronic motor speed control. After connecting the belt for the first time, you won’t need to look under the platter again. Rotation speed selection is made by 2 neat electronic buttons on the ST’s aluminium top surface – so you can effortlessly switch between playing albums and singles.

Aluminium, Tuned
Alva ST’s platter is aluminium die-cast, finished by CNC to ensure a totally level and smooth surface. The 17mm high aluminium platter is finished with a 5mm rubber mat – a combination proven to reduce unwanted resonance.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva ST to do just that, with a 1mm aluminium top plate, and a layer of EVA to absorb vibration sitting on top of MDF. It’s cradled in a composite chassis and weighs 9kg. Reassuring solid, and with great sound absorption qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva ST shares our minimalist house style. It’s the perfect match for our best-selling Evo and CX Series hi-fi separates. Designed and engineered in London with the emphasis on classic timeless style.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Belt Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.12%
• TURNTABLE PLATTER: Die Cast Aluminium
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 645.3g (930.5g inc. rubber mat)
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 6W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.3W
• DIMENSIONS (W X H X D): 435 x 139 x 366.7mm
• WEIGHT: 9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: Moving Magnet
• CARTRIDGE FREQUENCY RESPONSE: +/- 0.5dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Alloy Tube
• CARTRIDGE OUTPUT LEVEL: 1.8~3.6mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-st

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

A universal stroboscopic disc used to show the running speed of the turntable at 33 and 45 RPM with a spindle radius guide.

Machined aluminium housing turntable leveler that provides a precise level for horizontal adjustment of the turntable.

Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.

Specifications
Dimensions: 14 mm (0.55") diameter × 27 mm (1.06") to 39 mm (1.54") height*
Lift bar movable width: 3 mm (0.12")
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55") diameter × 12 mm (0.47") height; 14 mm (0.55") diameter × 24 mm (0.94") height)

* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.

Fully Manual Belt-Drive Turntable
•Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Motor with speed-sensor system to maintain accurate platter rotation speed
•Adjustable dynamic anti-skate control
•High-isolation, height-adjustable feet
•Professional anti-resonance, die-cast aluminum platter with rubber mat
•AT-HS4 ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Adjustable dynamic anti-skate control
•AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
•Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
•High-isolation, height-adjustable feet
•AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Drive Method: Belt-Drive
Type: 2-speed, fully manual operation
Motor: DC servo with Active Speed Stabilization
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Signal-to-Noise Ratio: > 60 dB
Output Level: Pre-amp: "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements: 100 to 240 V, 50/60 Hz
Power Consumption: 220 V 50 Hz
Working: 1.3 W
Motor off: 1.1 W
Power off: 0.1 W
Dimensions: With dust cover 126.0 x 420.0 x 340.0 (H x W x D mm) Without dustcover and hinges:114.0 x 420.0 x 340.0 (H x W x D mm)
Weight: 4.81 kg (without dustcover)
Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus in black
• Detachable RCA output cable (dual RCA male to dual RCA male)
• Platter
• AC adapter
• 45 RPM adapter
• Counterweight
• Turntable mat
• Removable hinged dust cover

Manual: https://www.audio-technica.com/cms/resource_library/literature/e89c31b269914a97/at_lpw50pb_um_162502020_v1_en_web_191220.pdf

AT-LPW30TK
Manual Belt-Drive Wood Base Turntable

• Teak effect wood veneer finish
• Connect directly to speakers at home with the built-in phono preamplifier
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge

Video: https://www.youtube.com/watch?v=gmWsctJ8Kzk

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.