Turntable Accessories 10 Items

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Contactless Fader by Jesse Dean for your Reloop SPIN turntable.

The JDDX2R-SP is the same design built of the legendary JDDX2RS-A - with extra capability!

No need to take out and calibrate each time - calibrate from the top!

It’s dual rail slide contactless element gives it durability for an aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors and circuitry. There is virtually no cleaning needed with this contactless element.

- Dual rail 45mm slider for stability and smooth action
- Magnetic sensor contactless circuitry
- Two side cut-in adjustment
- Switchable from double cut to 2 channel capability
- FR4 fiberglass PCB faceplates
- Full size fader cap by Cooler Caps!
- 30 second easy installation
- Comes with cut adjuster screw driver

JDDX2R-SP calibration instructions: http://www.zendell.uk/LINKS/JDDX2RS-A_calibration.pdf

JDDX2R-SP double cut instructions: http://www.zendell.uk/LINKS/JDDX2R-SP.pdf

Jesse Dean Contactless Scratch Fader for your Stanton STX portable turntable.

The all new high performance fader for ultra fast cuts.

Digitally controlled.

The fader features billet aluminum rail blocks for a robust construction.

Extremely easy cut-In adjustment without having to remove your fader.
Simply calibrate your fader from the top!

45mm glider travel with standard mounting hole pattern for preferred alignment.

Kit includes:

• JDDX2R-SX fader
• Black JDD fader plate
• Black fader cap
• Mini screwdriver for cut adjustment

JDDX2R-SX calibration instructions: https://www.youtube.com/watch?v=Gm3RpM8ughI&t=3s
Stock fader calibration instructions: https://www.youtube.com/watch?v=4o4nG07CUcA

An upgraded replacement platter belt for the Reloop SPIN portable turntable.

Thicker than the stock belt
Wider than the stock belt
Better grip and torque
Compatible with Vestax Handy Trax

Record Spindle Holders!

For all turntables - simply push onto the spindle and keep your slipmat and vinyl locked down!
• Soft silicon
• Pack of 5
Straight outta SoCal.

Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its interaction with your tonearm and turntable.

Before testing your cartridge, please verify the HiFi system’s functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.
The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level.

Please refer to your turntable and tonearm’s instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and antiskating according to the cartridge’s recommended technical data, and adjust stylus overhang.

The new 15-track fine pressing

Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:

1. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
2. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
3. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
4. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
5. Reference tone 1000 Hz 5 cm/sec rms Left
6. Reference tone 1000 Hz 5 cm/sec rms Right
7. Reference tone 1000 Hz 5 cm/sec rms Left
8. Reference tone 1000 Hz 5 cm/sec rms Right
9. Tracking ability, lateral 50 ?m peak
10. Tracking ability, lateral 60 ?m peak
11. Tracking ability, lateral 70 ?m peak
12. Tracking ability, lateral 80 ?m peak
13. Tracking ability, lateral 90 ?m peak
14. Tracking ability, lateral 100 ?m peak
15. Square Wave Form 2.7 msec duty cycle 3:7
* The record has a constant velocity amplitude throughout the sweep.

1-4 Frequency sweep – a tool for checking frequency response
There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.

5-8 Reference tone for testing channel output
With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.

9 -14 Tracking ability test, 315 Hz lateral modulation
These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge’s tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained.

15. Square Wave Form 2.7 msec duty cycle 3:7
When monitoring the output of your cartridge with an oscilloscope you’ll then see a square wave located precisely above each other if the connection from the cartridge is correct.

After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear.

To maintain optimal sound reproduction and to minimize wear on your records as well as on your stylus, we recommend the following procedure before and after each playback:
• Remove dust carefully from record surfaces by using a fine antistatic brush or cloth before every use.
• Please remember to remove dust from the diamond tip before and after playback of each record
• I order to keep electrical contacts clean and to lubricate the knurled nut on the tonearm, Ortofon recommends occasionally a light spray of contact cleaner like DeoxIT ®Gold G-Series into the tonearm socket.

It should be noted that some phono equalizers may generate some tone distortion, which cannot be referred to the cartridge.

User Guide: https://www.ortofon.com/media/148619/ortofon-test-record-user-guide.pdf

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

The UDG Turntable Dust Cover Black made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your turntable from from dust and liquid drops.
Size: approx.cm: 49 x 39 x 16 | inch: 19.3 x 15.3 x 6.3
Fabric: water-resistant nylon 210D.