Turntable Accessories 31 Items

UDG Ultimate Turntable & 19" Mixer Dust Cover Black MK2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ortofon Tonarmwaage is a scale that helps to adjust the perfect tone arm weight. A great tool for perfectionists! Range: 0.8 up to 3.0 g.

Go to Item

UDG

16,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Turntable Dust Cover Black made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your turntable from from dust and liquid drops.
Size: approx.cm: 49 x 39 x 16 | inch: 19.3 x 15.3 x 6.3
Fabric: water-resistant nylon 210D.

Go to Item

analogis

Vinyl Stabilizer

44,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

760 g layer weight to stabilize vinyl records.
Ø 70mm

Go to Item

analogis

Acryl Slipmat

24,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Staubschutzhaube Typ 1

32,50 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pro-Ject standard dust cover Type 1, suitable for chassis like Debut, 1, 1.2, Xpression.

Go to Item

Phono Box MM (Phono-Vorverstärker)

79,99 €*

TTW10 Turntable Weight For 12" And 7"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MM Phono Pre-amplifier

Good sound from sound technology
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)

Features
• Amplification and RIAA equalisation for MM cartridges
• Small size allows installation close to record player

107x36x104 (115)mm

Manual: http://www.project-audio.com/inhalt/en/manual/manual_phonoboxmm.pdf

Go to Item

Varia Instruments

119,99 €*

Abdeckhaube / Dust Cover RP-1000/2000/4000/ +MK2

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Go to Item

Reloop

49,90 €*

AT6180a Stroboskopscheibe

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dust Cover RP-1000/2000/4000/ +MK2

FEATURES
• Hinged dust cover
• Suitable for Reloop RP-1000/2000/4000 MK1 and MK2
• Sturdy rigid plastic cast

TECHNICAL DATA
• Dimensions: 442 x 68 x 348 mm (358 hinge seat)
• Incl. two hinges

OFFERED IS JUST THE DUST COVER WITHOUT TURNTABLE!

Go to Item

Audio-Technica

21,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A universal stroboscopic disc used to show the running speed of the turntable at 33 and 45 RPM with a spindle radius guide.

Go to Item

PT Classic Plate X One (Numark PT01)

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT Pyra Plate X One (Numark PT01)

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

X One (Numark PT01)

64,99 €*

Plattenspieler Anti-Vibrations Füße

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The X One is the substructure of the modular plate concept. The X One is made of aluminum and allows you to quickly change any plate on the PT01 Scratch. This makes it easy to reproduce different styles on a record player using different plates.
The X One, an essential basis for the Plate X One system, consists of two parts: the plate and the X One itself.

Only the turntable is delivered, a Numark PT01 Scratch is not included in the package.

Go to Item

Turntable Parts

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Phase Magnetic Plate (Pack of 4)

13,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Phase Magnetic Plate (Pack of 8)

19,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RS MK2 Plate X One (Reloop Spin)

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT Stars Plate X One (Numark PT01)

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Measure it S2 - Elektronische Tonarmwaage

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

Go to Item

Grease it

17,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Bearing lubricant

How to use Grease it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.

Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line.
For non-inverted bearings you should use Lube it.

Features:
• To be used with inverted bearings
• Helps a smooth movement
• Pre-filled syringe
• Easy handling

Amount: 2.3 ml

Go to Item

Plattenpuck PRO

49,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stabilize your records

Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

OPTIMIZED PLAYBACK OF YOUR RECORDS
This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications:
• Material: Nickel-plated aluminium
• Weight: 190g
• Diameter: 78mm
• Height: 16mm

Go to Item

Align it DS3

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Q UP

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Little Fwend

Little Disco Fwend

179,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Mini Libelle Edelstahl

20,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This small level gauge is a great aid in accurately checking and setting the cartridge VTA and Azimuth.
Weight: 0,64 g

Go to Item

Staubschutz für Plattenteller - Dustprotector

38,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

Go to Item

Stroboscope Speed Test Record

58,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Go to Item

Lenco

TTA-12IN1PRO

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Expert 12 in 1 turntable care kit - A must-have accessory

The Lenco TTA-12IN1PRO is an aluminium suitcase containing all necessary accessories for taking care of your turntable and records collection.

The contents:
A record anti-static brush to clean your records, a stylus force scale to check the pressure of the stylus on the record, a cartridge azimuth and VTA protractor and a cartridge alignment protractor to make sure that your cartridge is perfectly aligned for the best sound performance.
4 small level gauges and a bigger level gauge to make sure that your turntable is perfectly horizontal.
In case you want to change your cartridge you will find pliers, 4 cartridge wires, 12 cartridge screws and a small screw driver.
To keep the stylus clean we provide a stylus brush.
Plus gauge & 45rpm adapter.

Included : Record anti-static brush, Stylus force scale, Cartridge azimuth and VTA protractor, Cartridge alignment protractor, 4 small level gauges, Pliers, 4 cartridge wires, 12 cartridge screws, Screw driver, Stylus brush, Big level gauge, 45rpm adapter

Go to Item

STX Classic Plate X One

119,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Discover the STX Classic Plate X One - a revolutionary addition to the X One series, specifically designed for the Stanton STX. This high-quality turntable combines a robust aluminum base, the “X One”, with a precisely manufactured top plate, the “Plate”.

Both parts are carefully screwed together, complemented by a 3D printed element that ensures perfect belt guidance. The modular design allows the STX Classic Plate X One to be customized to your liking and offers an improved, more stable scratch feel.

Suitable for: Stanton STX
Material: aluminum, brass, PLA

Only the turntable is delivered, a Stanton STX is not included in the package.

Go to Item

Concept Signature Abdeckhaube

190,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Acrylic dust cover for Concept Signature.
Dimensions (W/D/H in mm): 450 x 380 x 147 (Outer dimension)

Go to Item

Performance Plattengewicht

250,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record weight made of aluminum with an integrated Teflon bushing on the underside for smooth placement (332 g).

This high-quality accessory, available in silver or black anodized aluminum, is specifically designed for the Performance series and stands out with its stylish design and exceptional functionality. Of course, this weight can also be used with other Clearaudio models and other brands.

The Performance record weight features an integrated Teflon bushing on the underside, ensuring smooth placement and significantly easing handling. At the same time, the weight is softly decoupled from the spindle. With a precisely calibrated weight of 332 grams, it is tailored for turntables with CMB bearings and clearaudio DC motors, making it the perfect complement to these systems.

Additionally, the record weight is compatible with all radial tonearms as well as the TT5 tonearm, making it a versatile accessory for audiophiles and professional users alike.

Weight: 332 g

Go to Item

Performance Plattengewicht

250,00 €*