Styluses 7 Items

•Allround cartridge system with many applications
•Balanced sound, slight accentuation of the bass range
•Can also be used for scratching

The Concorde Black cartridge system offers many application possibilities and emphasises its quality as a good all-rounder. Due to the balanced sound and a slight accentuation on the bass range, the system is often used in clubs. Thanks to its special spherical stylus, the vinyl wear is rather low. The cartridge system can also be used for scratching.

FEATURES
•Allround cartridge system with many applications
•Special spherical stylus
•Balanced sound, slight accentuation of the bass range
•Can also be used for scratching
•Low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 5 mV
•Tracking force range: 3 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

AT-VMN95E
VM95 SERIES ELLIPTICAL REPLACEMENT STYLUS
Aluminium cantilever
Elliptical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

The OM cartridge for headshell mounting comes with superb sound characteristics and a very sturdy construction that also lends itself to scratching.

FEATURES
•Headshell mounting
•Spherical stylus
•Low vinyl wearout
•Excellent sound characteristics
•Appropriate for scratching
•Sturdy construction

TECHNICAL DATA
•Frequency range: 20 Hz - 22 kHz
•Output voltage (5 cm/s): 4 mV
•Tracking force range: 1,75 - 2,25 g
•Recommended tracking force: 2 g
•Weight: 5 g

DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - DJ S

Stylus for Goldring G1006 Cartridge

Just needle, not the complete cartridge included!

Stylus for Goldring E4 MM Cartridge

Just needle, not the complete cartridge included!