Search "Era – Ameno" 22 Items

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

Welcome to the new era of DJing - control djay on your iPhone, iPad, or Mac with professional turntables and mixers. You can now take the stage - anywhere, anytime - using your ultra portable iOS device as the brains of the DJ booth.

Hardware Setup
Plug-and-Play DVS for your iOS device
You can now connect your iOS device directly to your mixing system. The optimized user interface automatically adapts when DJ hardware is connected.

djay Control Vinyl
The next generation of DVS technology
Algoriddim has partnered with the world leading DJ manufacturers to develop a wide range of premium DJ controllers, DJ mixers, and accessories, co-branded and designed to seamlessly integrate with Algoriddim’s award-winning DJ apps.

This feature is powered by an enhanced DVS control tone exclusive to djay Pro AI which has a unique control data stream imprinted into the grooves of each of the three distinct sections of the vinyl. This drives the patented Neural MixTM technology running on Mac, iPad, or iPhone, using cutting-edge artificial intelligence to separate any song into its original components in real-time.

Mobile & Desktop
Mac. iPad. iPhone. DVS without compromises.
We’ve worked closely with some of the world’s top DJs and carefully adapted djay’s user interface to perfectly complement any connected hardware. It’s a unique blend of tactile and touch based control. Moreover, djay’s audio engine has been fine tuned for digital vinyl control to offer the tightest scratching, most accurate time-stretching, and lowest latency possible - no matter if you’re using your Mac, iPad, or iPhone.

DVS FAQs
What you need to know
What do I need in order to use DVS with djay?
DVS in djay is supported with any compatible mixer, turntable, and djay Control Vinyl (see below). Depending on which device you are using djay on, you might need one of the following adapters in order to connect your mixer:

iPad or Mac with USB-C port: USB-C to USB Adapter
iPad or iPhone with Lightning port: Lightning to USB 3 Camera Adapter
Which mixers are supported?
djay supports any audio interface, mixer, and MIDI controller that is supported on the respective platform. In addition, many of the most popular DVS-compatible mixers have been pre-mapped and can be used plug-and-play with djay and DVS.

➡ List of pre-mapped DVS-compatible mixers

Which DVS timecode djay Control Vinyl is supported?
In addition to the official djay Control Vinyl (see above), djay also supports standard timecode DVS systems that use a control tone of 1kHz (which the vast majority of DVS systems do).

Where can I get the official djay Control Vinyl?
Head over to our vinyl partner STOKYO’s website to order your djay Control Vinyl today! The vinyl are available as a single option or as a pair, and are in stock now.

Which versions of djay support DVS?
DVS is supported in the latest versions of djay on Mac, iPad, and iPhone (version 4.0 or later).

Video: https://www.youtube.com/watch?v=gUXWGZFvBZs

Go retro with our EQ-001 wireless headphones!

Get the complete retro look by pairing your WE-001 cassette player with the EQ-001 wireless headphones from We Are Rewind! Bringing 12 hours of wireless audi, and integrated microphone and 3 different preset equalizer modes, they work just as fine with your smartphone.

Interchangeable ear cushions
Find the style that suits you best, thanks to 3 interchangeable ear cushions (orange, yellow and black), and let the nostalgia flow.

Listen for hours
Lightweight and comfortable thanks to its adjustable headband, the EQ-001 has a 12-hour Bluetooth battery life. So you can listen to your favorite mixtapes without strain.

Built-in equalizer
As for sound, you can personalize your listening experience by choosing from 3 different equalizer modes: "Signature", "Balanced" and "Bass Boost".

"GO" button
Compatible with our WE-001 cassette players, you can also use these headphones with your smartphone. Listen to your music, pause it, answer a call, hang up... all with a simple click on the "GO" button.

Integrated microphone
Last but not least: a double-click microphone and an integrated digital MEMS microphone make it easy to activate and deactivate Siri, Google Assistant and other voice assistants.

Weight: 0.404 kg

What's in the box:
• EQ-001 wireless headphones
• micro USB charging cable
• interchangeable ear pads (orange, yellow and black)
• two-year WE ARE REWIND warranty

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume
Aufgrund der überwältigenden Nachfrage aus der Serato Community hat Serato die neue Performance-Serie 7" Control Vinyl released. Diese Control Vinyl wird als Pärchen in der beliebtesten Farbe schwarz ausgeliefert und beinhaltet auf beiden Seiten das neuste Serato NoiseMap Control Signal in einer neu gemasterten Form. Dieses Signal ist nun 6dB lauter als zuvor, was ein deutlich präziseres Tracking und angenehmeres Vinyl-Feeling zur Folge hat.

Features


• 2x 7“ Control Vinyl (CV 2.5) in schwarz
• Control Vinyl zur Steuerung der Serato DJ und Serato Scratch Live Software
• A-Seite und B-Seite mit 4 Min. Control Signal
• Das bewährte Serato NoiseMap Control Signal, remastered und 6dB lauter als bisherige Control Vinyls
• „Vinyl Select“ Funktion ermöglicht das Steuern der MP3 Files in der Library
• Durchgehendes Steuersignal auf der Control Vinyl erlaubt ein problemloses exaktes Scratchen und mixen
• Innovatives Positionierungssystem für ein schnelles und genaues Positionieren der Nadel (Needle Droping)
• Sichtbare in Minuten unterteilte Zeitmarkierungen auf der Control Vinyl

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Keith Grey) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Keith Grey)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Serge Orange) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Serge Orange)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Kurt Blue) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Kurt Blue)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm