Search "the+very+best+mtmtmk" 336 Items

General purpose model for scratch and back-cueing

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for. It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
PRO cartridge weight
18,5 g

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

DJ S is a solid-built cartridge in a new blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

Output voltage at 1000Hz, 5cm/sec.
6 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
23 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz 3dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
9 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Compatibility
DJ Series

Co-designed by various DJs. Especially developed for scratch and back-cueing. Very high output!

As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing. Like the QBert, DJs had a say in designing this cartridge so it would match the needs of dance floor kings.

It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task.

Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec.
7 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
5 g

The curved 7 Inch Single Puck is the companion piece of your big hole 7 inch records, made with high-grade steel.

• Weight: approx. 140 g.
• Ø 37 cm
• Height: ca. 23 mm.

Made in Germany

Techno cartridge co-designed by DJs. Rubber tube especially developed for scratch and back-cueing. Very high output. Every professional ought to try the Electro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches. Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio. Unaffected by extreme sound pressure and repeated vibrations, it has a high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.

Ortofon Elektro Replacement Styles - Specs:

Output voltage at 1000Hz, 5cm/sec.
7.5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

The world's first needle designed specifically for coded vinyl with low wear!

The DigiTrack is the perfect marriage of easy and function. You can now manupulate MP3's with the style and feel of a turntablist and the tradition of a turntable.

The DigiTrack responds to the generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

High output and the best mix and scratch ability!

Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +3 dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
• -
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
•
Internal impedance, DC resistance
•
Internal inductance
•
Recommended load resistance
•
Recommended load capacitance
•
Cartridge weight
18,5 g

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 50 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Blank, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 90 mm centered
• selling unit: 20 pieces
• Made in Germany

Blank, unprinted cardboard sleeve for storing 10 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 25 cm diameter vinyl records as well as Schellack records, including lined or unlined inner sleeves.

Record Sleeve 10" Vinyl Cover (Mittelloch) - specific details:

• measures: 265 mm x 265 mm x 3 mm
• material: 300 g GC1 cardboard
• die-cut diameter: 100 mm centered
• selling unit: 25 pieces
• Made in Germany

The 45 Twister is the ultimate tool for every DJ playing 45 singles (7“). This product guarantees that the 7 inches are able to scratch, mix and cut perfectly as a 12 inch! Beatjuggling, contest scraching – no problem anymore! The 45 Twister works on every turntable, because it is a precision product made in EU of best stabile material, perfect measured 45 compatible, plus a super soft-rubber surface mat. This high grade tool guarantees the fastest and safest way to play your 7 inches. The 45 Twister was developed and designed by DJ Enne. The base colour of the 45 Twister is: Transparent with slight glitter!

Approved by Florian Keller, DJ Mirko Machine, Jon Kennedy & others!

Just in case the middle hole is tight:
Take a scissor , put it from bottom in the hole, screw it 2-3 time slightly, test it, if still too tight, repeat it. Then it should fit perfectly.

UDG CD Player/Mixer dust cover made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your gears from dust and liquid drops.

UDG CD-Player/Mixer Dust Cover - features:

• fabric: water-resistant nylon 210D
• UDG logo printed in plastisol
• fits CD player/mixer
• protect various equipment
• outer dimensions: approx. 32 x 38 x 13 cm (12.6 x 15 x 5.1 inch)
• weight: approx. 0.09 kg (0.19 lbs)

Black, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 80 mm centered
• selling unit: 20 pieces
• Made in Germany

M6 enables you to step up to a four-channel mixer. This club-style design not only works with any standard audio sources including turntables and CD players, but it also has a USB computer connection. When connected to your Mac or PC, the plug-and-play connection empowers you to mix in audio in from music-player software and record your sets into virtually any audio recording application.

You will enjoy a complete range of performance essentials in M6, including three-band EQ and LED metering per channel. M6 has a replaceable crossfader with slope control, and you can assign any channel to either side of the crossfader.

You can talk over the mix with M6’s dedicated XLR microphone channel and a secondary mic input on channel four. And for the best possible sound, M6 has balanced outputs.

Get all the flexibility of a four-channel mixer plus the power of computer connection with M6.

FEATURES

Four input channels, each with gain, three-band EQ, and LED metering
USB computer connection for playing and recording with Mac or PC
Play music from music-player software
Record your mix to your computer
Multiple phono, line, and mic inputs
Dedicated XLR mic channel and additional mic input on channel 4
Replaceable crossfader with slope control
Assign any channel to either side of the crossfader
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M6 USB Mixer
Power Cable
Quickstart Guide

Weight: 9.6 lbs
Dimensions (WxDxH): 12.625" x 14.25" x 4"

The analogis Vinyl Workmat is a pad for the professional cleaning of vinyl ecords and CDs. It works best with analogis DeDuster 3345.

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 7" Vinyl Schutzhülle - specific details:

• dimensions: 187 x 187 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 50 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 50 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

• incl. Brush
• incl. Flight Case

Video: https://youtu.be/WZnFkEwAnCo

supplied in Flight case

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

supplied in Flight case

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

Video: https://youtu.be/WZnFkEwAnCo

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

supplied in Flight case

At last, a way to clean and restore your precious vinyl records without the use of expensive mechanical record cleaners, three step washing processes or dangerous petrochemicals. The university Award Winning RECORD REViRGiNiZER is the only product that can clean your vinyl records thoroughly and remove the pops and crackles from your valuable record collection.

"I am now sampling with the cleanest sound possible. Nothing fixes your records like Record Revirginizer!" - RZA, Grammy Award Winning Musician, Producer and Film Director.

Contains 500ml.

RECORD REViRGiNiZER isn't just a record cleaner, it actually restores your vinyl records close to their original condition by using a revolutionary anti-static polymer that works like a facemask on the grooves of your record. It's the closest thing to a miracle for vinyl record cleaning and restoration ever invented!

How it Works and More!

RECORD REViRGiNiZER is a viscous, non-toxic liquid that is poured onto a vinyl record. It is then massaged into the records surface and left to set. After setting it is easily peeled from the records surface, at the same time taking all the microscopic contaminants with it; it's a bit like a facemask...but for vinyl records!

REViRGiNiZER is formulated with just the right elasticity to remove all the embedded material, but at the same time it does not leave any residue, nor does it damage your vinyl in any way. The anti-static properties of the formula ensure that once the film is pealed off your vinyl will be static free. You can clean and restore your records close to their original condition and in some cases (due to residue left behind from the manufacturing mould release compounds) it can actually improve the sound of a brand new record as well.

With a REViRGiNiZER treatment your music will have a superior depth and clarity; this is another reason vinyl is enjoyed by audiophiles worldwide.

With a REViRGiNiZER treatment you can now sit back and enjoy your precious vinyl recordings just like they were new. We guarantee REViRGiNiZER is the best vinyl record treatment you can buy, or your money back!

We promise you that you will be amazed by the results. (Too bad we didn't think of it before the advent of CD's!)

How To Use:

1. Gently shake the bottle of REViRGiNiZER for 30 seconds before use.
2. Lay your vinyl record on a flat even surface, preferably on a clean record sleeve, and then wash hands.
3. Measure 20 ml / 0.65 fl.oz of REViRGiNiZER for a 30cm /12 inch record and pour evenly over one side of the record, avoiding the label. After you have used REViRGiNiZER a few times try reducing the amount to 15ml/ 0.5 fl.oz for a 30cm/12 inch record. Use 10ml / 0.3 fl.oz. for a 7 inch record.
4. Massage the REViRGiNiZER solution into the record’s grooves in a circular motion using one or two clean fingers.
5. Place a paper tab 5mm / 1/4 inch in from the outside edge of the record and over an area where the solution has already been applied. See illustration on bottle for approximate tab size.
6. Leave the REViRGiNiZER solution to dry completely. Drying time will normally take between 4 and 12 hours*. Drying time varies depending on humidity, evaporation and ambient temperature.
*Drying time can be significantly reduced by drying the record under a fan or in an air-conditioned room.
7. AVOID USING REViRGiNiZER ON RAINY OR HUMID DAYS unless records can be dried in an air-conditioned or dehumidified room or under a fan.
8. Once dry, use the paper tab to carefully peel the film from the record. DO NOT leave the film on the record longer than 3 hours hours after it has dried.
9. Remove any film that may still remain on the record by gently rubbing the remaining film with the dried film that has already been peeled off.
10. Repeat steps 1 to 9 on the other side of the record
11. Your record has now been restored with RECORD REViRGiNiZER.
12. If possible replace the old record sleeve with a new sleeve to avoid

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Made from 21 oz FattEz™, the HHV Logo Slipmats are perfect for precise DJing activities. This 12" slipmat is made from the highest quality poly felt material that's very similar to the thick felt of old school Technic slipmats. The HHV Logo Slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface. Perfect for the mix/club DJ as well as turntable and audiofile enthusiasts.

• Weight: 21 oz;
• thickness: 0.125 inch.
• 100% polyester felt.
• Made in USA

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

A true MAGMA classic. The LP-Bag 100 Trolley is a proven practical and convenient transportation solution to carry up to 90 12″ vinyl records. The new reinforced design has been rigorously tested to insure the highest strength and stability to carry your precious records well protected.

FITS

90 12“ Vinyl
Headphones
Needle-case
Cables

BASICS

Durable, water-repellent 480D Nylon and high quality zipper
Telescopic handle on a sturdy reinforced trolley-board system
Holds approximately 90 records
Extra-thick 2,5 cm thick padding all around the main compartment
Padded back wall to protect the telescopic handle from damage
Lockable zipper on main compartment
3 exterior pockets for headphones, needles and other accessories
Comfortable carrying handle and detachable padded shoulder strap

SPECS

Outer measures: 38 x 45 x 38 cm
Inner measures: 32 x 31 x 28 cm
Weight: 4,2 kg


Color: black/red (Item-No.: 40540/ EAN-Code: 4041212405401)

A true MAGMA classic. The LP-Bag 100 Trolley is a proven practical and convenient transportation solution to carry up to 90 12″ vinyl records. The new reinforced design has been rigorously tested to insure the highest strength and stability to carry your precious records well protected.

FITS

90 12“ Vinyl
Headphones
Needle-case
Cables

BASICS

Durable, water-repellent 480D Nylon and high quality zipper
Telescopic handle on a sturdy reinforced trolley-board system
Holds approximately 90 records
Extra-thick 2,5 cm thick padding all around the main compartment
Padded back wall to protect the telescopic handle from damage
Lockable zipper on main compartment
3 exterior pockets for headphones, needles and other accessories
Comfortable carrying handle and detachable padded shoulder strap

SPECS

Outer measures: 38 x 45 x 38 cm
Inner measures: 32 x 31 x 28 cm
Weight: 4,2 kg


Color: black/black (Item-No.: 40500/ EAN-Code: 4041212405005)

The OM cartridge for headshell mounting comes with superb sound characteristics and a very sturdy construction that also lends itself to scratching.

FEATURES
•Headshell mounting
•Spherical stylus
•Low vinyl wearout
•Excellent sound characteristics
•Appropriate for scratching
•Sturdy construction

TECHNICAL DATA
•Frequency range: 20 Hz - 22 kHz
•Output voltage (5 cm/s): 4 mV
•Tracking force range: 1,75 - 2,25 g
•Recommended tracking force: 2 g
•Weight: 5 g

Analog and digital worlds collide in the Reloop Concorde Green cartridge, resulting in the perfect unit designed for use with timecode records. Thanks to its high output voltage, it is able to reproduce timecode signals in an especially precise way while the special spherical stylus also reduces vinyl wear.

FEATURES
•Optimized for timecode vinyls
•Special spherical stylus
•Very high output voltage
•Appropriate for scratching
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 20 kHz
•Output voltage (5 cm/s): 8 mV
•Tracking force range: 2 - 4 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.
The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.
On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.
With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record.

FEATURES
•Quartz-Controlled HiFi turntable with high torque
•Brushless Direct Drive DC Motor
•Precision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotation
•Deadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and damping
•Static-balanced S shaped tonearm with VTA adjustment
•Adjustable anti-skating dial for improved cartridge tracking
•Pre-installed Ortofon 2M Red cartridge
•Integrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM)
•Universal Headshell Connector provides added flexibility
•High Quality Phono outputs (with separate grounding connection)
•Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable)
•Sunk-in terminal cavity for protected connection
•Especially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decoupling
•Supplied counterweight supports a wide variety of cartridges
•Elegant design with deep black Piano Finish and a fully gold anodised Platter
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

TECHNICAL DATA

Turntable Section:
•Type: Direct Drive Manual Turntable System
•Drive: Quartz driven upper-torque direct drive
•Motor: 16 pole, 3 phase, brushless DC motor
•Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
•Starting Torque: 4500 g/cm
•Start-up time / rpm change: less than 0.2 sec.
•Wow and flutter: 0.01% WRMS
•S/N Ratio: More than 55 dB (DIN-B)
•Brake system: electronic brake

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 332 mm
•Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
•Type: Universal Static Balanced S-Shaped
•Effective Length: 230 mm
•Overhang: 15 mm
•Tracking Error Angle: Less than 3 degree
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•Adjustable Tonearm Base (VTA): 0-6 mm
•Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
•Anti-Skating Range: 0 – 3 g
•Effective tonearm mass: 20 g (incl. headshell)

Terminals:
•1x PHONO Out (gold-plated), 1x GND Earth Terminal
General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power Consumption: 9 W
•Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
•Weight: approx. 12.8 kg

Included Accessories:
•Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, power cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

Analogue HiFi Turntable for Audio Purists

The TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.

Smooth belt drive & low-noise DC motor

The precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.

Static balanced, straight tone arm with optimal tracking performance

The TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.

Flexible Headshell Connection

The headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.

Classy, matt slimline housing with high-quality terminal

Alongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.

FEATURES
•Belt-driven Hi-Fi turntable
•Factory fitted with Ortofon OM10 cartridge
•New straight tonearm design with optimal tracking performance
•Manual arm lift
•Low vibration DC motor
•Integrated motor control with Speed-Switch for conveniently selecting
two different speeds 33 / 45 rpm
•External DC power supply
•Die-cast Aluminum Platter with chrome edging
•Anti-Skating Wheel-System
•Gold-plated, corrosion resistant connections (all cables detachable)
•Slim-line wooden Plinth with mat black finish
•Convenient power switch at the side bottom
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

TECHNICAL DATA

Turntable Section:
•Type: Belt-Driven Analogue Turntable System
•Drive: Belt drive
•Motor: DC Motor
•Turntable Speeds: 2 speeds (33 1/3, 45)
•Wow and flutter: 0.2% WRMS
•S/N Ratio: >65 dB (a-weight)

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 300 mm
•Weight: 550 g

Tonearm Section:
•Type: Static Balanced Straight Tonearm
•Effective Length: 224 mm
•Overhang: 19 mm
•Tracking Error Angle: 25°
•Tracking Force: 1.5 g
•Applicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)
•Anti-Skating Range: 0 – 3 g

Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:
•Power supply: DC 12 V, 500 mA
•Power Consumption: 6 W
•Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
Weight: Approx. 4.6 kg

Included Accessories:
Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

The TTW10H is our turntable weight which combines two needful features for every vinyl DJ:
A disc stabilizer and an adapter for 7“ records.
The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

OUR HANDCRAFTED TURNTABLE WEIGHTS WORK EITHER FOR 12“ AND 7“ RECORDS.

Our turntable weights feature a smart mechanism: The 7“ adapter inside the weight is moveable- as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10H. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10H comes in a neat printed box with a linen bag to take it out to your gigs.

The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g / 1.78lbs.

STAINLESS STEEL BODY WITH A SOLID BRASS CORE.

• DIMENSIONS: Ø75mm × 33mm (Ø2.9 × 1.3 inches)
• WEIGHT: 808g (1.78 lbs)

Handmade in Switzerland

Video: https://youtu.be/e1be_0Ijhms
https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
Channel balance at 1 kHz - 1.5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1.6-2.0 g (16-20 mN)
Tracking force, recommended - 1.8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
2M standard and 2M Verso cartridges weight - 7.2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

- NEW - High purity special water for record cleaning - NEW -

Disco-Antistat BiDest

• 1 litre bidistilled water, chemically pure, demineralised
• For the production of approx. 1 litre of cleaning liquid for records (in a ratio of 1:25, e.g. with Disco-Antistat Ultraclean)
• Suitable for all record washers!
• According to VDE 0510, DIN EN 285, ISO 3696 (II) and DIN 43530
Disco-Antistat BiDest is a high-purity special water, such as is used in laboratories or cosmetics. All dissolved substances have been removed from the water by means of complex physical processes, which means that it is pure H2O, in contrast to the water available in DIY stores, for example. Therefore, it is ideally suited for all applications where purest water is required. For an optimal cleaning result with our Disco-Antistat Ultraclean concentrate, we therefore recommend the use of Disco-Antistat BiDest for the preparation of the cleaning liquid. Of course, Disco-Antistat BiDest is also suitable for a variety of other applications.

Disco-Antistat BiDest is suitable for use with all record washers!

Made in Germany!

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

The HD 25 Light are closed, dynamic headphones for monitoring, recording and outdoor applications.

They are extremely comfortable, featuring a minimalistic headband and a unique capsule design, making them an attractive and lower-cost alternative to the HD 25-II. These are also suitable for nightly DJ use.

FEATURES

Closed, supra-aural DJ mixing headphones for use in high noise environments.

Excellent sound reproduction: emphasized bass and lifted treble

Lightweight and comfortable, even if used for long periods of time

Extremely rugged, made for daily use

Capable of handling very high sound pressure levels

Dual-sided, detachable cable, 3m

WHAT'S IN THE BOX?

1 HD 25 LIGHT
1 Screw on jack adapter 3.5 to 6.3 mm

Not only the care of your records, but also that of the turntable needle makes a significant contribution to extending the life of vinyl and increasing the sound quality. With our carbon fibre needle cleaning brush, we offer you an important tool that helps you cleaning the record player needle effortlessly. The brush removes dust and dirt and prevents static charging of the needle. We recommend regular cleaning.

The Vinyl Care by HHV product series stands for best quality and an excellent price-performance ratio. The care products for records have been specially developed for the needs of passionate vinyl lovers and come in stylish Vinyl Care packaging.

Our Microfibre Cleaning Cloth is an extremely absorbent, high-quality and washable cloth for lint-free cleaning of LPs, CDs, Blu-Rays and all kinds of surfaces like glass, plastic or metal. With the cloth made of polyester and polyamide you can remove dirt particles with one wipe. The playback quality of sound and image carriers can thus be preserved and improved. Like all Vinyl Care by HHV products, the microfibre cloth convinces with best quality at an attractive price and comes in a stylish packaging.

Special record treasures deserve a prominent place. Whether it's your personal record of the month, the best record of all time for you or the records you've already picked out for a special evening – our elegant record stand can hold up to 6 records at the same time.

The high-quality metal frame is covered with a black powder coating and will find a suitable place in any music room as a discreet vinyl accessory.

The record stand is a perfect gift idea for any passionate vinyl collector and comes in stylish Vinyl Care packaging.

Tape lovers watch out: With our cassette cleaning set, we offer you an indispensable tool for gently cleaning the sound heads in your cassette recorder, walkman or car radio.

Only 25 seconds of running time provide a significantly improved playback quality of the cassette. Delivery includes 2 10ml bottles of audio head cleaner.

The cassette cleaning set is part of the Vinyl Care by HHV product range, which we have developed for the special needs of music lovers and collectors. The set is delivered in the stylish Vinyl Care packaging and is also very suitable as a gift.

Blank, unprinted cardboard sleeve for storing 12 inch picture disc records. This cover is equipped with a large centered die-cut hole, so artwork is available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl LP Picture Cover (Black) - specific details:

• measures: 315 x 312 x 3 mm
• material: cardboard, 300 g/m²
• die-cut diameter: 260 mm centered (single-sided)
• selling unit: 10 pieces
• Made in Germany

Blank, unprinted cardboard sleeve for storing 12 inch picture disc records. This cover is equipped with a large centered die-cut hole, so artwork is available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl LP Picture Cover (White) - specific details:

• measures: 315 x 312 x 3 mm
• material: cardboard, 300 g/m²
• die-cut diameter: 260 mm centered (single-sided)
• selling unit: 10 pieces
• Made in Germany

Blank, unprinted cardboard sleeve for storing 2 x 12 inch records. This gatefold sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl Double LP Gatefold Cover (White) - specific details:

• measures: 315 x 315 x 5 mm
• material: cardboard, 300 g/m²
• white, shining
• selling unit: 10 pieces
• Made in Germany

Blank, unprinted cardboard sleeve for storing 2 x 12 inch records. This gatefold sleeve is also perfect for getting printed or inscribed, and it's suited for 30.5 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 12" Vinyl Double LP Gatefold Cover (Black) - specific details:

• measures: 315 x 315 x 5 mm
• material: cardboard, 300 g/m²
• black, shining
• selling unit: 10 pieces
• Made in Germany

Studio Industry Icon
Engineered to deliver a superior sound experience at an affordable price, the M50x have been widely acclaimed online by professionals, casual listeners and streamers. From everyday listening and commuting to gaming or studio recording, you’re in great hands with the M50x, with build quality and coveted sound engineering that’s praised by audio experts and professionals year after year.

Gaming Excellence
Consistently celebrated by critics and designed utilising over half a century of Japanese audio design and technology, you’ll hear every blast, boss and battle in stunning clarity and immersive sound through the ATH-M50x. Their wide and clear sound range allows you to discern between every layer of your game’s audio design whilst enjoying crisp musical highs and low, bassy explosions. And because the ATH-M50x is powered through the audio jack alone, you can play uninterrupted, indefinitely.
If you’re looking for streaming, online and co-op communication, the optional ATGM2 Detachable Gaming Boom Microphone is the perfect accompaniment to online gameplay with exceptional pickup and clarity that can be easily detached or flicked up when not needed.

Professional Home Studio Headphones
With 55 years of Japanese audio design, Audio-Technica is loved by many of the world’s biggest artists, vocalists and musicians and the M50x headphones remain one of our most popular innovations to date. Whether you’re a music industry veteran or you’re looking to start recording at home, the ATH-M50x are an excellent choice of headphones for listening back to or monitoring your audio performance.
Either from your computer/audio receiver or plugged directly into your microphone for monitoring (as with our AT2020 or AT2020USB+ microphones), the ATH-M50x headphones deliver stunning sound design.

The Extraordinary Everyday
Rated highly for their professional-grade comfort, foldable versatility, strong construction and excellent sound design, the ATH-M50x are an exquisite choice as your audio daily drivers. Whether it’s travel, your daily commute or working and studying at home, you’ll love their all-day comfort and immersive sound design. Offering passive noise isolation through circumaural design contours, our M50x headphones provide a high-quality audio experience, helping you to boost your concentration and productivity at work and allowing you to meditatively switch off on your commute.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Collapsible for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)
• Top choice for studio tracking and mixing, as well as DJ monitoring and personal listening

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45mm
• Frequency Response: 15 - 28,000 Hz
• Maximum Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Weight: 285g without cable/connector
• Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Screw-on 1/4” adapter, pouch

Closed-back dynamic headphones
High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.

Features:
• Large 53 mm CCAW bobbin-wound voice coil drivers reproduce full, wide-range sound
• Anti-vibration aluminium housings ensure rich sound reproduction
• Self-adjusting headband support mechanism automatically delivers the best possible fit
• Bass-ports create tight, deep bass sound
• Soft foam earpads provide extra comfort while listening

Specifications:
• Driver Diameter: Closed-back dynamic 53mm
• Frequency Response: 10 - 25,000 Hz
• Maximum Input Power: 1,800mW
• Sensitivity: 106 dB/mW
• Impedance: 40 ohms
• Weight: 270g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

High-Fidelity Open-Back Headphones
The newly designed ATH-AD500X are open-air headphones that produce a completely natural sensation without losing any of the natural sound and deep impactful bass.

a natural, precise and profound listening experience
The ATH-AD500X Open-back headphones offer a natural, precise and profound listening experience. The earcups and the 3D wing structure of the headband make listening all the more comfortable and immersive allowing for long lasting listening comfort, further enhanced by extra padding on the earpads.

ccaw voice coils
The large-aperture 53mm drivers of the ATH-AD500X are built around the CCAW voice coils developed by Audio-Technica, which create stunning audio and deep and balanced bass reproduction.

extreme comfort
The earphones are covered with large earcups that fully cover the ears. The earcup pads are dressed in a durable and very soft fabric that provides exceptional listening comfort allowing for prolonged use.

3D wing headband structure
The 3D Wing System comprises the the small removable wings that are found across the range of our HiFi headphones. No adjustment is necessary, the headset adapts itself to any head shape as soon as it is positioned on the head, and removes any feeling of pressure felt with a classic shaped headband. You will forget that the headphones even weigh 235g!

immersive listening
The open-back headphones keep any pressure away from the ears, to allow for a natural listening sensation.

HONEYCOMBED HOUSING
The large honeycombed aluminum housing provides a sense of clarity and exceptional ventilation.

OFC CABLE
The ATH-AD500X has a connection cable made from OFC (oxygen-free copper) treated for improved conduction which avoids any sound alteration.

3D WING STRUCTURE
The 3D Wing Structure system allows ATH-AD500X to adapt to different head shapes for optimum user comfort, making the headphones feel weightless, even during prolonged use.

Features:
• 53mm drivers and CCAW voice coils reproduce remarkable natural sound
• Deep, impactful bass and outstanding vocal projection
• Open-air headphones that provide no sense of pressure on the ears, resulting in a completely natural sensation
• Lightweight honeycomb aluminum casing
• Self-adjusting 3D Wing Support Housing provides comfortable support for a more enjoyable listening experience
• Flexible raised-fabric earpads offer excellent wearing comfort and durability
• Highly conductive OFC (oxygen-free copper) single sided cable with elastic TPE sheath to prevent tangles
• Gold-plated stereo 1/8” (3.5mm) connector with 1/4” (6.3mm) adapter

Specifications:
• Type: Open-air dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 - 25,000 Hz
• Maximum Input Power: 500 mW
• Sensitivity: 100dB/mW
• Impedance: 48 ohms
• Weight: 235g
• Cable: 3.0m
• Connector: 3.5 mm(1/8”) mini stereo, gold-plated
• Accessories Included: Detachable 1/4” (6.3 mm) adapter

The Gemini TT-4000 High Torque direct drive turntable features a redesigned chassis with reinforced cabinet construction. The TT-4000 uses a precision-machined die-cast aluminum platter for a stable stand in the club. The shock-absorbing rubber feet absorb shock or vibration during operation.

It is ideal for DJs, audiophiles and casual listeners alike. The 16-pole brushless 3-phase DC motor drives the TT-4000's direct drive. The turntable features precise pitch control of +/- 10%. A statically balanced S-shaped tonearm features a hydraulic lift and anti-skate mechanism.

For those who want to digitize their record collection, the Gemini TT-4000 offers a USB port for connection to PC/Mac. This way you can easily record and digitize your vinyl albums.

Thanks to a built-in phono preamp that allows for a line-level output, the TT-4000 does not require grounding.

Features:
• Direct drive turntable with very powerful torque
• Ideal for DJing, listening to music or digitizing
• USB port for connection to PC/Mac
• Very strong torque of 4.5 kg/cm
• Balanced tonearm in S-shape
• Damped rubber feet absorb shocks and vibrations
• Phono preamp with line output built in - no grounding required
• Pitch control of +/- 10%

Technical data:
• Direct driven DC motor with high torque (4.5 kg/cm)
• Signal-to-noise ratio: 40 dB
• Turntable weight: 523 g
• Pitch adjustment: +/- 10%
• Audio interface: USB 2.0 | sampling rate: 48k, 44.1k, 16 bit
• Power consumption: approx. 5.5 W
• Power supply: AC 115V - 60Hz | 230V - 50Hz
• Weight: 6.35 kg
• Dimensions (W x D x H): 490 x 315 x 262 mm

Scope of delivery:
• Gemini TT-4000 Turntable
• Power cable
• RCA cable
• Headshell with pickup/stylus
• Slipmat
• 45 adapters
• User manual & warranty information
• Audacity Software CD V2.1.3

Experience exceptional sound clarity with Audio-Technica's ATH-S220BT wireless headphones, featuring up to 60 hours’ battery life and multipoint connectivity.

ATH-S220BT are lightweight, relaxed-fit headphones built to provide extended comfort. Weighing in at just 180g (6.3 oz) - around the same weight as a 12" vinyl record - the ATH-S220BT headphones’ intelligent design helps prevent neck and shoulder strain so you can enjoy album after album or gaming sessions with friends.

From listening to your favourite tunes through your smartphone to browsing the latest viral videos on a laptop or tablet, you’ll experience powerful sound from every source.

Since 1962, Audio-Technica has been devoted to providing listeners with the very best in sound quality and there’s no compromise to that dedication when it comes to our truly immersive ATH-S220BT best budget wireless headphones

These affordable wireless headphones also have a quick charge feature - they can be charged in ten minutes for 3.5 hours of listening time. Plus, with a USB type A to USB Type C™ cable included, you’re able to charge with ease using a variety of different devices.

If you’re looking for the best headphones under £100, look no further. Incorporating an abundance of features, the ATH-S220BT headphones are also compatible with both Siri and Google Assistant, so you’re able to access your device’s speech recognition function at the touch of a button. Receive notifications, send messages and control your audio playback without lifting a finger.

Features:

60 Hr Battery
The Audio-Technica ATH-S220BT is an ideal choice for those looking for Bluetooth headphones with a long battery life – making them a reliable travel companion or top selection for settling down to listen to your favourite album or podcast.

Multipoint Pairing
Connect to your smartphone, PC or tablet simultaneously and take the stress away from having to switch between multiple devices.

Built-In Mic and Controls
You’ll experience exceptionally clear audio thanks to the ATH-S220BT’s high-quality built-in microphone.

Wired and Wireless Listening
For a wired audio experience, use the included 1.2m cable. With a built-in microphone and remote, the plug-in option provides the ultimate flexibility for those wishing to experience superior sound whilst conserving battery power.

Immediate Voice Sync on Videos
Whether you’re watching TikTok videos on your daily commute or enjoying the latest Netflix series, even the slightest audio lag can impact your experience. With low latency mode on the Audio-Technica ATH-S220BT, you can enjoy minimal sound delay and crystal-clear audio.

• Up to 60 hours of continuous use on a full charge and up to 3.5 hours of use on a 10-minute rapid charge (via USB-C connection)
• Slim housings with sleek, lightweight earpads exert less pressure on your ears for a comfortable fit with good sound isolation
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Google Fast Pair lets you quickly pair headphones with an Android smartphone or other device
• Voice guidance function provides helpful notifications, including power and pairing status, and remaining battery level
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
• Type: Closed‐back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 - 32,000 Hz
• Sensitivity: 105 dB/mW
• Impedance: 32 ohms
• Battery: DC 3.7 V lithium polymer battery
• Battery Life: Approx. 60 hours continuous use (music playback)
• Weight: Approx. 180 g (6.3 oz)
• Charging Time: Approx. 4 hours
• Cable: Detachable 1.2 m iS controller cable with mic
• Connector: 3.5 mm (1/8″) stereo mini
• Microphone Type: Electret condenser
• Microphone Sensitivity: ‐42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 - 4,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Accessories Included: USB charging cable (30 cm (12”), USB Type‐A / USB Type‐C) cable with in‐line mic and control (1.2 m (3.9’) /3.5 mm (1/8”) gold‐plated stereo mini‐plug (4 pole/L‐shaped))
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight ‐ approx. 10 m (33')

Black, unprinted cardboard sleeve for storing 10 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 25 cm diameter vinyl records as well as Schellack records, including lined or unlined inner sleeves.

Record Sleeve 10" Vinyl Cover (Mittelloch) - specific details:

• measures: 265 mm x 265 mm x 3 mm
• material: 300 g GC1 cardboard
• die-cut diameter: 83 mm centered
• selling unit: 25 pieces
• Made in Germany

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
Channel balance at 1 kHz - 1.5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1.6-2.0 g (16-20 mN)
Tracking force, recommended - 1.8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
2M standard and 2M Verso cartridges weight - 7.2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Blue features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, an environment-friendly material which ensures high rigidity while eliminating unwanted resonances

2M Blue adds more dynamics and resolution, sounds more open and reproduces more details than 2M Red

Output voltage at 1000 Hz, 5cm/sec. - 5,5 mV
Channel balance at 1 kHz - 1,5 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at - 3dB - 20-25.000 Hz
Frequency response - 20-20.000 Hz + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1,6-2,0g (16-20 mN)
Tracking force, recommended - 1,8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1,3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Blue
Cartridge weight - 7,2 g
Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG SlingBag Trolley Deluxe (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. This limited edition version of the UDG SlingBag Trolley Deluxe comes with enough storage space for your records and additional equipment like headphones, controllers, mixers or other tools. In addition, it's also possible to transport a 15.4 inch laptop in the velvet padded interior compartment. In addition, the HHV x UDG SlingBag Trolley Deluxe has a more stable road position due to the widened wheelbase, which will not throw you off track even when sprinting to the train. Furthermore, the nylon upper material gave way to extremely durable, coated canvas, without sacrificing the rain protection for the vinyl. Easily replaceable foam pads with hook and loop fasteners provide a variable interior that offers maximum protection for approximately 58 x 12 inch records.

HHV x UDG SlingBag Trolley Deluxe - features/specs:

• soft rubber grip
• padded 15,4 inch laptop compartment
• small inner zip bag
• adjustable shoulder strap
• hide-away 3-stage trolley handle
• smooth rolling wheels with quality bearings
• UTX buckle at main compartment
• 2 x side zip pockets e.g. for headphones
• flap pocket with hook and loop fastenr, zip closure on front
• interior replacable padding with hook and loop fasteners
• code combination lock
• exterior dimensions (H x W x D): 470 x 510 x 310 mm
• interior dimensions (H x W x D): 320 x 390 x 200 mm
• weight: ca. 5,5 kg
• exterior fabric: coated canvas
• lining: 420D nylon

For our 20th anniversary, we've teamed up with UDG to introduce the HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition), a very special design where functionality meets subtle co-branding. The HHV x UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the HHV x UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The HHV x UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This HHV x UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

HHV x UDG Ultimate 7" SlingBag 60 (HHV 20 Years Edition) - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

Premium HiFi-turntable with digital USB-Audio Interface.

• Authentic HiFi turntable with digital USB-Audio Interface
• Pre-installed Ortofon 2M Red cartridge
• Low-vibration DC motor

Over 25 years experience
With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.

Quiet DC drive
The heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.

Electronic speed control for 33, 45 & 78 rpm
The TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.

Revised tonearm construction
The redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience.

Anti-skating wheel
The anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.

Headshell connection
The headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.

USB recording function
The integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.

Semi-automatic stop
With the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.

Shock-absorbing feet
Decoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal.

Precision-manufactured die-cast aluminium turntable
The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.

Solid base with piano finish
The sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image.

Immediate listening pleasure with hi-tech Ortofon cartridge
The TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.

Gold-plated connections
The gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.

High-end pre-amplifier
Equipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.

A class of it's own
The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

SPECIFICATIONS
FEATURES:
• Authentic HiFi turntable with precision belt drive
• Supplied with pre-assembled Ortofon 2M Red cartridge
• Optimised tonearm design for optimal tracking accuracy with flexible SME mounting
• Integrated high-quality preamplifier, can be switched on/off (phono/line output)
• USB recording function: recording and digitalisation of vinyl via simple USB connection for PC/Mac
• Semi-automatic stop function (can be activated optionally)
• Manual tonearm lift for analogue playback pleasure
• Low-vibration DC motor
• Integrated motor control with large speed selector switch (33/45/78 RPM)
• External DC power supply for trouble-free operation (100-230 V / 12 V / 500 mA)
• Precision-machined die-cast aluminium platter for resonance optimisation
• Infinitely adjustable anti-skating system with rotary wheel for optimum tracking accuracy
• Gold-plated, anti-corrosion connectors (all cables removable)
• Special turntable feet for effective decoupling
• High-gloss piano-finish cabinet
• On/Off switch on the back of the unit
• Incl. Ortofon 2M Red cartridge pre-mounted on headshell, counterweight, dust cover incl. hinges, felt mat, aluminium turntable, 7" aluminium adapter, RCA & USB cable and international power supply (UK/EU/US)

TECHNICAL DATA
TURN 3 MK2:
• Type of turntable: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45 & 78
• Wow and Flutter: 0.2% WRMS
• Analogue Output: Phono / Line, switchable
• Connections: RCA Audio output (gold-plated), USB type B
• Phono Output Level: 4.0 mV (with Ortofon 2M Red)
• Line Output Level: 224 mV (with Ortofon 2M Red)
• Tone Arm type: Straight
• Effective Arm Length: 223.6 mm
• Effective tonearm mass: 21.4 g
• Overhang: 18.6 mm
• Tracking force Range: 18 mN
• Platter diameter: 300 mm
• Anti-Skating adjustment: Yes
• Type of cartridge: MM (Ortofon 2M Red)
• Power consumption: 6W
• S/N: >60 dB or higher
• USB Audio Output with 48 kHz / 16-Bit
• USB Funktion: USB rec. function
• Supported Operating System: Windows & Mac
• Dimensions: 450 x 352 x 138.7 mm (incl. Dust cover)
• Weight: 6.5 kg

ORTOFON 2M RED:
• Output voltage at 1000 Hz, 5cm/sec.: 5,5 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 μMm
• Compliance, dynamic, lateral: 20 μMm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μMm
• Tracking force range: 1,6-2,0g (16-20 mN)
• Tracking force, recommended: 1,8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1,3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g

Manual: https://www.reloop-hifi.com/media/productattach/t/u/turn3mk2_im.pdf