Search "dillon+tip+tapping" 135 Items

Technical data
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,6-2,0 g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Stylus colour Translucent

EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DON’T

Adjustable cartridge which will fit in a traditional headshell mount. Replaceable diamond tip.

• 5" mount+W36
• 0,6mil spherical diamond tip
• tracking force: 2,5g to 3,5g
• ch.separation: 26dB @ 1KHz
• output: 2,4 mV

Technical data
Frequency range
20-25.000 Hz
Frequency response
20-25.000 Hz
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges OM 5E, OMP 5E, OMB 5E, OMT 5E

Technical data:
• Frequency range 20-22.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Red
• Recommended for following cartridges 2M Red / 2M Red Verso(Interchangeable with 2M Blue / 2M Blue Verso)

A piece for pierced ears, it consists of a
classic silver hoop earring with a fine curb
chain which attaches to an ear plug. When
not in your ear, the plug becomes the tip of
an extravagant dangle earring.

PROFESSIONAL DJ CARTRIDGE

Optimized cartridge for dance music DJ performance
The CS-1 Professional DJ Cartridge is designed and optimized for dance music. True full-range frequency response, a fine tip circular diamond stylus and high output all combine to make the CS-1 the only choice for serious dance club and mobile DJs.

FEATURES
• Frequency response: 20 to 22,000Hz
• Output: 6mV
• Channel separation nominal: 32dB
• DC resistance: 430 ohms/ch
• Inductance: 400mH/ch
• Weight: 18.0g
• Channel balance: within 1.5dB
• Tracking force: 3
• Recommended load: 47K ohms 200pf
• Stylus tip: fine circular diamond
• Application: club and mobile DJs, high output

One-Touch Polymer
Stylus Tip Dry Cleaning System

STYLUS TIP Dry Cleaning System
• Made from an innovative solid polyurethane (PU) polymer.
• Ultra-soft, highly elastic and strong adhesive ability to keep the Stylus in pristine condition.
• Liquid-free. Solvent-free

Winyl One-Touch contains an innovative solid polyurethane (PU) polymer, specially designed to provide exceptional cleaning for record player stylus needles to ensure top quality sound.

The polymer is soft and highly elastic, with strong adhesive properties to remove dust and microscopic dirt, reducing surface noise and distortion on the playback. In addition, its cleaning system allows to clean the corner-gap between cantilever and stylus.
The polymer has been developed to ensure that it leaves no residue on the stylus, due to its dry-cleaning system, liquid-free.

One-Touch is safe and easy-to-use. Place the headshell above the polymer, lower the cartridge slowly until the stylus needle is inserted into the polymer, lift it up. The dirt will adhere to the polymer surface, leaving the needle clean.

One-Touch Polymer is washable and reusable. If the surface of the polymer becomes heavy soiled after repeated uses, simply rinse it with tap water and rub gently the surface with a finger to loosen dirt. Drain and let dry. The polymer will recover its cleaning properties to use it again. By keeping One-Touch in good condition, you will be able to use it for years with the same effectiveness as the first day.

PS Clear Case 41 x 40 x 15 mm
Polymer 30 x 30 x 3 mm (PU sheet)

• Made in Spain

Manual Videos:
https://www.youtube.com/watch?v=Eb-QxvH2Ezk
https://www.youtube.com/watch?v=zkPnvE6gHog

The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound

The name 2M was selected from several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.
We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue Series features:

an improved engine, which provides an increased output of 5.5mV
Nude Elliptical diamond and split pole pins with a copper wire

Technical data:
• Frequency range 20-25.000 Hz
• Frequency response 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 80 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Nude Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Blue

Ortofon Stylus 10 - technical data:

• Frequency range 20-24.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 25 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Tracking force range 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended 1.5 g (15 mN)
• Tracking angle 20°
• Stylus color Black
• Recommended for following cartridges: Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, TM 10H, LMB 12, SMB 12, LMA 12, Concorde STD, Dual ULM 65E, Dual ULM 66E

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 г (12.5-17.5 мН)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 310 Universal
*) Typical value

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Grey
• Recommended for Series 305 Universal
*) Typical value

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Your record player needle also needs cleaning and care. Due to the air pollution caused by both external influences (traffic) and domestic factors (kitchen, smoking), a sticky film can form on your records over time. During playback, the stylus scrapes this deposit out of the record groove, which in turn creates a sticky film around the tip of the stylus, which in turn traps other dirt and dust on your record.

These deposits not only affect sound quality, but can even damage your favorite records. Nagaoka AM-801's special formula efficiently dissolves and removes any sticky substances trapped on the needle.

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Electronic stylus balance

The Measure it S2 Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.

Scope of delivery:
• stylus balance
• calibration weight
• screwdriver
• 2x AAA batteries
• protection case for the meter
• user guide

Features:
• 4 digit LCD-Display with backlight
• Capacity 0 - 5g
• Variance ±0,001g
• Auto calibration function
• Auto off after 60 seconds
• Replacement batteries supplied

Technical Specifications:
• Capacity: 0 - 5g
• Variance: ±0,001g
• Weighting modes: gram (1g = 10mN), ounce (oz), pennyweight (dwt) and carat (ct)
• Display: 4 digit LCD with backlight
• Calibration: Auto calibration using a 5g weight
• Auto off: 60 seconds off
• Replacement battery: 2 x AAA cells, 1,5V
• Operating temperature: +10 - +30°C (50 - 86 degrees Fahrenheit)
• Dimensions (W x H x D): 122 x 27 x 55mm
• Weight: 170g

To secure hi-fi furniture, sideboards, shelves and all self-designed furniture, Record Box offers a set for wall mounting. Consisting of an angle, two screws and a dowel for the wall, the set provides a secure connection of the piece of furniture to the wall, protecting it from tipping.

It is essential to follow the instructions for use when attaching the wall mounting set!

Record-Box stands for individual solutions for record storage and maximum freedom in realizing your own furniture ideas.

Technical details:
• Contents: 1x angle bracket, 1x screw short (furniture), 1x screw long (wall), 1x wall plug
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other!
• The professional installation of the anti-tilt device must be
operating instructions!

DJ-03 HD - CARTRIDGE INCL. HEADSHELL

This is the Nagaoka DJ cartridge. With a high output voltage of 6 mV and a recommended tracking force of 3 - 5 g, it is one of the more stable of its kind.

TECHNICAL SPECIFICATIONS:
• Cartridge type: MM
• Configuration: Climax DS/DSM
• Output voltage: 6 mV (5 cm/sec.)
• Frequency Characteristics: 20Hz~20KHz
• Channel separation: 20 dB (1 kHz)
• Channel balance: 2 dB or less
• Load resistance: 47 kΩ
• Load: 100pF
• Cantilever: aluminum alloy
• Needle Tip: 0.6 mil tapered bonded diamond
• Recommended tracking force: 3~5g
• Pickup weight: 5.1g
• Weight with headshell: 15.1g

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

AT-XP7
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• VM dual magnet cartridge with elliptical bonded stylus

The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable robust design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• Great visibility of stylus tip for instant positioning in dark environments
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Tapered aluminium cantilever
• Stainless wire suspension enables expressive higher frequency for clearer sound
• High-rigidity and Low-resonance cartridge housing
• Replacement Stylus: ATN-XP7

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 20,000 Hz
• Channel Separation: 22 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Stylus Construction: Bonded Round Shank
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 6.0 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: Output Channel Balance
• Stylus Shape: Elliptical
• Cantilever: Aluminium tapered Pipe
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 8.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP7
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

User Manual: https://eu.audio-technica.com/resources/AT-XP7_UM_112301360_V1_11L_web_171018.pdf

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

The 2M 78 features an improved engine, which provides a high level of sonic accuracy. The stylus' tip is a Spherical diamond that is perfect for playback of 78 rpm shellac records, which require a larger stylus profile. The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M 78 uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.

The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M 78 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 18 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 65 µm
• Tracking force range - 1.6-2.0g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Internal impedance, DC resistance - 700 Ohm
• Internal inductance - 350 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Tracking angle - 20°
• Cartridge colour, body/stylus - Black/Grey
• Cartridge weight without screws - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M 78 (interchangeable with 2M Mono)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze and 2M Black
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

The Bundle contains 5x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 5x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 3x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 10x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 10x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

The Bundle contains 3x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Step into the music with the 2M Red
With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into music itself. This is our entry-level cartridge in the series, but what an entry.

Featues:
The 2M Red features a tipped Elliptical diamond and split pole pins with a copper wire.
The engine provides an increased output of 5.5 mV and an optimized sound reproduction and a high level of sonic accuracy.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red delivers an open, dynamic sound with a slight touch of warmth.

2M Red Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 70 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Red
• 2M standard and 2M Verso cartridges weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2M Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience.
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

The Goldring 1006 is designed for owners who want to get the very best from their systems at a budget price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.

Low Mass Pocan® Body
The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.

High Efficiency Magnetic Circuit
Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.

Reduced Moving Mass
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.

Expert Adjustment
The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image.

Specifications:
• Frequency Response: 20 Hz -20 kHz ±3 dB
• Channel Balance: within 2 dB @ 1 kHz
• Channel Separation: better than 25 dB @ 1 kHz
• Sensitivity: 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec
• Static Compliance: 24 mm/N (lat); 16 mm/N (vert)
• Equivalent tip mass: 0.45 mg
• Vertical Tracking Angle: 24°
• Stylus Radius: Elliptical
• Stylus Type: Replaceable
• Load Resistance: 47 kΩ
• Load Capacitance: 150-200 pF
• Internal Inductance: 570 mH
• Internal Resistance: 660 Ω
• Cartridge Mass: 6.3 g
• Cartridge Mass (inc. fixings): 7.6 g
• Fixing Centre: 0.5" (12.7 mm)
• Playing Weight: 1.5 - 2.0 g (1.7 g nom.)
• Replacement Stylus: 1006 - D0

Tape lovers watch out: With our cassette cleaning set, we offer you an indispensable tool for gently cleaning the sound heads in your cassette recorder, walkman or car radio.

Only 25 seconds of running time provide a significantly improved playback quality of the cassette. Delivery includes 2 10ml bottles of audio head cleaner.

The cassette cleaning set is part of the Vinyl Care by HHV product range, which we have developed for the special needs of music lovers and collectors. The set is delivered in the stylish Vinyl Care packaging and is also very suitable as a gift.

OP–1 field is an all-in-one battery-powered synthesizer, sampler and drum machine. OP–1 field is packed with features including: a built-in speaker, microphone, multiple effects, vocoder, fm radio, bluetooth midi, even a velocity sensitive keyboard. it's the most powerful portable synthesizer available.

• 12 synth engines
• sampler, drum machine and sequencer
• tape recorder
• built in effects
• ultra-portable
• dimensions: 28.8 cm x 10.2 cm x 2.9 cm
• weight: 589 g / 20.8 oz

Record Box lets passionate vinyl collectors realize their individual wishes for the storage and presentation of records. With stackable storage and register boxes and attractive add-ons, the modular system offers unlimited possibilities for the construction of furniture such as sideboards, shelves, DJ racks, highboards and more.

With the help of the specially developed glue dots, the boxes and modules can be easily stacked - without any screws or tools. According to the instructions, the glue dots are attached to the clean contact surfaces of the boxes to protect them against slipping and tipping. The adhesive dots can be removed at any time without leaving any residue and enable extensions or new arrangements with new adhesive dots. To connect two boxes together, four adhesive dots are needed.

A construction height of up to three boxes is recommended within the modular system. Record Box also offers a wall mounting set for security, which enables the furniture to be connected to the wall using a bracket, two screws and a dowel.

It is essential to follow the operating instructions when installing the adhesive dots!

Record Box stands for innovation, practical solutions and individuality.

Technical details:
• Transparent glue dots made of silicone
• Adhesive on both sides and detachable
• Dimensions: 15mm x 2mm
• Packaging unit: 20 pieces / pack

Enter the Exclusive world of Ortofon’s famous moving coil sound!
The Quintet Red is a perfect introduction to the world of Ortofon moving coils.
It features an Elliptical diamond which is cut and polished to Ortofon’s standards.

This entry-level MC cartridge has very high price-to-performance ratio and is a perfect all-rounder for the newcomers to the world of Moving Coil cartridges.

MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The ST-7 transformer is a perfect match for the MC Quintet Red cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.

MC Quintet Red Technical data:
• Output voltage at 1 kHz 5 cm/sec - 0.5 mV
• Channel balance - < 1.5 dB
• Channel separation at 1 kHz - > 21 dB
• Channel separation at 15 kHz - > 14 dB
• Frequency response 20-20.000 Hz - +/-2.5 dB
• Tracking ability at 315 Hz at recommended tracking force *) - 65 μm
• Compliance, dynamic, lateral - 15 μm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 μm
• Tracking force range - 2.1-2.5 g (21-25 mN)
• Tracking force recommended - 2.3 g (23 mN)
• Tracking angle - 20º
• Internal impedance, DC resistance - 7 Ohm
• Recommended load impedance - >20 Ohm
• Cartridge body material - ABS/Aluminium
• Coil wire material - Copper
• Cartridge colour - Red
• Cartridge weight - 9 g
*) Typical value

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for Quintet cartridge.

Ease of use
Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell.

The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

Nightclub S Replacement Stylus
The Nighclub S stylus is amongst the top performers in its category, Scratch and Mix.

A spherical diamond and a customised design provide the basis for the cartridge's undeniable supremacy.

The stylus remains in the groove during the scratching and back-cueing, making it unfailingly reliable - even when giving a night-long performance.

Nightclub S Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-18.000 Hz +3 / - 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

OM Q.Bert pre-mounted on SH-4 Black headshell
The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Ultra high output
• Low wear characteristics

Tailored specifically for scratch, the OM Q.Bert provides unrivaled tracking ability and sonic characteristics.

Technical Data:
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Nagaoka Headshell HSAL-01

This headshell has been designed with the utmost precision to give you an outstanding listening experience.

Design for maximum ease of use:
When placing the needle, the finger lift design provides an excellent view of the needle tip. The finger hook is easy to use and the angle can be easily held with your fingers. Every detail has been designed with the utmost care to ensure uncomplicated and pleasant use.

Ideal for NAGAOKA JT-80 Series and many other pickups:
This high-quality headshell was developed specifically for the NAGAOKA JT-80 series to ensure an optimal combination of precision and performance. Enjoy music in its purest form with this perfectly coordinated combination.

Of course, the Nagaoka HSAL-01 can also be combined with other pickups. The elongated holes allow the perfect positioning of your pickup and the included cables leave enough room for adjustment.

Easy installation:
The Nagaoka Headshell HSAL-01 comes with an installation guide to give you an effortless setup. The package contains all the necessary items including mounting screws to make the installation process easier for you.

Product specifications:
• Housing material: aluminum
• Pin: Gold plated
• Weight: 6.8g (approximate value, excluding mounting screws)
• Frequency response: 20Hz - 20kHz
• Box contents: headshell housing, lead wire, 2 × 12mm screws, 2 × 6mm screws, compatible nuts, washers.

Audiophile MM Cartridge

Lively & robust with a high dynamic range

Intensive research, development and listening tests have been necessary to gain the the desired sound from the new Pick it PRO.

THE DIFFERENCE IN SOUND
Cartridges are electromechanical transducers, where mechanical energy is transformed into an electrical signal. The real difference in sound happens here. The colour and life of the music come from the cartridge.
You cannot judge the cartridge by looking at just one specific part. Experience and the art of fine-tuning make a cartridge unique and special. The perfect combination of components is the key to achieve the great charismatic sound of the Pick it PRO.

Technical Specifications:
• Cartridge principle: MM (Moving-Magnet)
• Output voltage at 1 kHz: 4 mV
• Channel separation at 1 kHz: 22 dB
• Tracking ability at 315Hz: 70 μm
• Frequency response: 20 - 20 000 Hz +/- 2dB
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μm
• Tracking force, range: 1,8 - 2,2 g (mN)
• Tracking force, recommended: 2,0 g (mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 750 Ohm
• Internal inductance: 450mH
• Recommended load resistance: 47kOhm
• Recommended load capacitance: 150-300pF
• Cartriddge weight: 7,2 g

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

The 12 inch 100 register box is a box for storing, presenting and browsing through records. At the same time, it is an essential component of Record Box - a modular furniture system that perfectly suits the needs of passionate vinyl collectors with its unbeatable variety, high aesthetic standards and excellent value for money.

As a register box, the 12-inch 100 box is ideal as the top box in the modular system of record boxes. In connection with other boxes and add-ons of the modular system, there are countless options for furniture for storing and presenting records.

With a length and width of 36 centimeters, the 12-inch 100 register box is a practical helper and an attractive end to stacked record boxes. It is available in three colors and has space for around 100 records.

The register box is made of high quality MDF with a robust surface made of melamine resin. It can be connected to the other Record Box modules using specially developed adhesive dots. These serve as protection against tipping or slipping and can be removed again at any time. To expand the system or to rearrange the boxes, new adhesive points are simply attached.

Record Box stands for a passion for vinyl. The modular system offers records optimal protection and a representative space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 31.5 cm | Inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

General purpose model for scratch and back-cueing

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for. It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
PRO cartridge weight
18,5 g

Entry-level cartridge for all-purpose use

New DJ? This entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

Nightclub E Replacement stylus
Nightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.

Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.

It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.

The special elliptical stylus guarantees sound with insignificant scratching.

Nightclub E Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommmende tracking force - 65 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

The tiny rack holds 12 MCs (upright).

width 250 mm
depth: 70 mm
height: 110 mm

color: black
material: plastic

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Keith Grey) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Keith Grey)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Serge Orange) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Serge Orange)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Kurt Blue) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Kurt Blue)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Gold Replacement stylus
Perfect for usage in discotheques and clubs: provides the best possible sound quality available in a DJ cartridge!

Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. Compatible to a very wide range of turntables.

Using the cartridge for the first time feels like striking gold. It is indeed the flagship product with its gold plating and special Pro E diamond. The Gold enjoys an excellent reputation for its amazing sound quality.

Available only with an elliptical stylus, the Concorde Gold is for DJs who will settle for nothing but the very best!

Technical data:
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/- 2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Gold (discontinued and no longer available)

DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - DJ S

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

DJ S is a solid-built cartridge in a new blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

Output voltage at 1000Hz, 5cm/sec.
6 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
23 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz 3dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
9 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Compatibility
DJ Series

OM Pro S pre-mounted on SH-4 Black
The OM Pro S on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Solid cantilever can survive hectic activity at the turntable

The OM Pro S is a consistent performer and a fine all-arounder!

OM Pro S technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 5 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5,0 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g
Replacement stylus unit - Pro S

MM phono cartridge for turntables

Beautiful design and superior sound!

The Pro-Ject Pick it S2 MM is manufactured by the cartridge experts at Ortofon and voiced by the design team at Pro-Ject. It is equipped with a special elliptical stylus tip. It provides detailed sound reproduction and expansive imaging. It is a no-nonsense performer with fascinating musical resources. Attached to a strong cantilever, used in DJ cartridges, this cartridge will not just sound great, it is also very strong.
The cartridge is made from a unique combination of technologies. Among others Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which compares with MC cartridges. The superior treble output provides a dynamic and warm sound.
Inspired by the diamond found on the stylus, the Pick it S2 MM is a beautiful design featuring a new and unique semi-transparent grey color. It goes perfectly with most Pro-Ject record players.

Features:
• Moving Magnet principle
• Split pole pins enables frequency responses that compares very well to MC cartridges
• Strong cantilever based in high-end DJ cantilevers
• Suitable for low to medium tonearm masses
• 1/2 inch mounting standard
• High trackability
• Pick it S2 MM should be connected to phono MM inputs
• As with most MM cartridges, stylus may be exchanged

Technical Specifications:
• Weight: 7.2 g
• Stylus type: elliptical
• Frequency response: 20 - 20.000 Hz
• Output voltage: 7 mV
• Recommended tracking force: 1,8 g (mN)
• Trackability (315 Hz, lateral): 70 µm
• Recommended load capacitance: 150 - 300 pF
• Recommended load resistance: 47 kΩ

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

The world's first needle designed specifically for coded vinyl with low wear!

The DigiTrack is the perfect marriage of easy and function. You can now manupulate MP3's with the style and feel of a turntablist and the tradition of a turntable.

The DigiTrack responds to the generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

High output and the best mix and scratch ability!

Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +3 dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
• -
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
•
Internal impedance, DC resistance
•
Internal inductance
•
Recommended load resistance
•
Recommended load capacitance
•
Cartridge weight
18,5 g

Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.

Specifications
Dimensions: 14 mm (0.55") diameter × 27 mm (1.06") to 39 mm (1.54") height*
Lift bar movable width: 3 mm (0.12")
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55") diameter × 12 mm (0.47") height; 14 mm (0.55") diameter × 24 mm (0.94") height)

* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.

Co-designed by various DJs. Especially developed for scratch and back-cueing. Very high output!

As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing. Like the QBert, DJs had a say in designing this cartridge so it would match the needs of dance floor kings.

It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task.

Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec.
7 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
5 g

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

Co-designed by DJ Q.Bert for scratch and back-cueing. High tracking ability. Ultra high output

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own.

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Output voltage at 1000Hz, 5cm/sec.
11 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
•
Frequency range at -3dB
20-18.000 Hz
Frequency response
20-18.000 Hz -3 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.680 Ohm
Internal inductance
920 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-400 pF
Cartridge weight
18,5 g

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Next level authenticity with the 2M Blue
The goal for any cartridge should be to reproduce the sound as close to the artists vision as possible, and the 2M blue takes you further on this journey of authenticity. With the 2M Blue, you get serious about listening to vinyl.

Features:
The 2M Blue features a Nude Elliptical diamond and split pole pins with a copper wire.

Designed for easy mounting of the cartridge, and for the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details compared to the 2M Red model.

2M Blue Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 25 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 2 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.6-2.0 g (16-20 mN)
• Tracking force, recommended - 1.8 g (18 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.3 kOhm
• Internal inductance - 700 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Blue
• Cartridge weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2M Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.

Record Box stands for maximum freedom in the design of functional and high-quality furniture for storing and presenting vinyl collections. For the production of shelves, sideboards or highboards, among other things, Record Box offers two sets of top and baseboards.

The baseboard is a plinth that is equipped with adjustable feet and can compensate for slight unevenness in the floor. The top board forms the upper end and thus a smooth cover plate for sideboards, DJ racks, shelves and more.

The top and sideboard set for two 12-inch boxes is 72 cm long and 36 cm wide and can be perfectly combined with the 12-inch 110 storage boxes and the 12-inch 50 storage boxes . The set is available in two colors and offers space for two 12-inch 110 or four 12-inch 50 storage boxes. Depending on the arrangement of the boxes, the colors of the modules used and the selection of register boxes or add-ons, an individual piece of furniture is created according to the wishes of the user.

The top board and baseboard are made of high quality MDF and have a surface made of melamine resin. The boards are connected to the record boxes using specially developed glue dots - without any screws. The adhesive dots are attached to connection points on the clean surface and can be loosened easily and removed later without leaving any residue. They protect against slipping and tipping and offer maximum freedom when arranging the modules.

Using the 12-inch storage boxes, the top and sideboards can also be used to create attractive solutions for storing files, books and other items.

Record Box stands for attractive record furniture, creative freedom and an unbeatable price-performance ratio.

Technical details:
• Dimensions: approx. 72 x 36 x approx. 4 cm
• Permissible total height: a maximum of three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connection element: glue dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Record Box stands for maximum freedom in the design of functional and high-quality furniture for storage and presentation of vinyl collections. For the production of, among other things, shelves, sideboards or highboards Record Box offers two sets of top and baseboards.

The baseboard is a pedestal board equipped with adjustable feet that can compensate for minor unevenness of the floor. The topboard forms the top finish, providing a smooth top surface for sideboards, DJ racks, shelving and more.

Measuring 72 inches long and 36 inches wide, the topboard and sideboard set for two 12-inch boxes is perfect for combining with 12-inch 110-storage boxes and 12-inch 50-storage boxes. The since is available in two colors and holds two 12-inch 110-storage boxes or four 12-inch 50-storage boxes. Depending on the arrangement of the boxes, the colors of the modules used and the selection of register boxes or add-ons, an individual piece of furniture is created according to the user's wishes.

Topboard and baseboard are made of high quality MDF and have a surface of melamine resin. The boards are connected to the record boxes using specially developed adhesive points - without any screws at all. The adhesive dots are attached to connection points on the clean surface and can be loosened with a flick of the wrist and removed later without leaving any residue. They protect against slipping and tipping and offer maximum freedom when arranging the modules.

Using the 12-inch storage boxes, the top and sideboards can also be used to create attractive solutions for storing folders, books and other items.

Record Box stands for attractive record furniture, design freedom and an unbeatable price-performance ratio.

Technical details:
• Dimensions: approx. 72 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating - white, black
• Connecting element: adhesive dots from "Record Box
• Boxes for self-assembly - screwdriver required!

Techno cartridge co-designed by DJs. Rubber tube especially developed for scratch and back-cueing. Very high output. Every professional ought to try the Electro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches. Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio. Unaffected by extreme sound pressure and repeated vibrations, it has a high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.

Ortofon Elektro Replacement Styles - Specs:

Output voltage at 1000Hz, 5cm/sec.
7.5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

Bona fide precision with the 2M Bronze
To us hi-fi is more than a fancy label. High fidelity is the goal of everything we do. The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time and you get to fall in love with the songs all over. That is what hi-fi means to us and that is what you get with the 2M Bronze.

Features:
The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Bronze Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 5 mV
• Channel balance at 1 kHz - 1 dB
• Channel separation at 1 kHz - 26 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 + 2 / - 0 dB
• Tracking ability at 315Hz at recommended tracking force - 80 µm
• Compliance, dynamic, lateral - 22 µm/mN
• Stylus type - Nude Fine Line
• Stylus tip radius - r/R 8/40 µm
• Tracking force range - 1.4-1.7 g (14-17 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1.2 kOhm
• Internal inductance - 630 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 150-300 pF
• Cartridge colour, body/stylus - Black/Bronze
• Cartridge weight - 7.2 g
• Premounted cartridge weight - 16.7 g
• Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250)

Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance.

2M Series styli interchangeability:
The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:
- 2M Red, 2M Blue and 2M Silver
- 2M Bronze, 2M Black and 2m Black LVB 250
- 2M Mono and 2M 78

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for 2M cartridge.

With the 2M Premounted, it’s never been easier to experience
The 2M Premounted is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The quality of the SH-4 headshell is sturdy and rigid, yet the design emphasizes a slim and delicate form factor. The strong, lightweight headshell has an ergonomic design with a long finger lift that is easy to pick up.

Features:
- Premounted on our popular SH-4 Black headshell.
- Easy and direct mount on S-shaped tonearms with universal mount.
- Correct Baerwald alignment with tonearms with universal mount.