Search "Bacao Rhythm Steel Band" 13 Items

Now NEW with changed recipe - without alcohol!

With the purchase of the DISCO-ANTISTAT MIXTURE, you have taken a decisive step towards cleaning and caring for your valuable records.

As of today, you can effortlessly clean old and heavily soiled vinyl records thoroughly and make them antistatic. Even vinyl records that have been played wet can be played back dry.

But even new vinyl records become immediately antistatic by a bath in the DISCO-ANTISTAT MIXTURE, even with sensitive measuring devices a static charge can no longer be detected.

Now also very suitable for shellac records!

Made in Germany!

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Kleeny MK2 Premium Record Cleaning machine

Made and engineered in Germany from experienced designers and technicans. This are the features:
• Beautifully designed, very compact housing that takes up little space
• Housing sides made of aluminum with leather-look covering
• Low operating noise thanks to noise insulation
• Silicone feet provide a secure grip and minimize structure-borne noise
• Adapter for dry vacuuming singles and 10 inch LPs included
• Robust traditional switches
• Ergonomic puck (record weight) with magnetic fixation - no screwing or clamping!
• Label protection by rubber lip
• Powerful, reliable platter motor rotates clockwise and counterclockwise
• Plate mandrel made of polished stainless steel
• Suction turbine with 250W power - does the drying in 2 revolutions!
• Platter mat made of soft, antistatic rubber
• Internal dirty water tank with drain spout, easy to empty. No hose or clamp required.
• Dry blow function protects against residual moisture and musty odor.
• Suction arm holder made of CNC milled aluminum
• Easy swinging in and out of the suction arm without screws
• Classic switch design

The robust switches could also be found in a classic sports car. The gear motor is switched on with the left switch. During washing, the direction of rotation should be changed several times by flipping the switch. The right-hand switch switches on the powerful suction turbine. It only needs 2 revolutions of the turntable and the record is dry. A high-quality record brush is part of the delivery programme.The unit can be emptied easily with the help of an outlet spout.

Secure protection for the label
The beautifully shaped puck has a sealing lip on its underside that protects the label from moisture penetration all around. Powerful magnets pull the puck onto the record. So nothing needs to be clamped or screwed. It couldn't be simpler.

Washing with premium brush attached by one click
The DRAABE Premium brush is included in the delivery. With Kleeny MK2 you don't need to hold the brush in your hand. It is simply clicked onto the wash arm. It adapts to the slight unevenness of the surface because it is suspended so that it can move. When the washing process is finished, you simply remove the brush and switch on the suction. It couldn't be simpler!

Scope of delivery - gets you ready to wash!
• Unit including, clamp, suction arm and platter mat
• Kleeny Service station with adapters for Singles and 10 Inch LPs
• Housing in noble leather look colour: bordeaux
• 200 ml Nessie cleaning lotion - ready to use, in suirt bottle for cleaning up to 40 records
• Premium record brush with click technology
• Connection cable with Euro, Swiss or UK Plug
• Manual in English language

Technical data:
• Dimensions without turntable: 280 mm x 145 mm x 230 mm
• Weight : 2,7 kg
• Power consumption "Suction" : 250 W
• Power consumption "Washing" : 12 W
• Power consumption "Stand by" : 0 W
• Diameter of turntable : 24.5 cm
• Dimensions with attached turntable : 375 mm x 245 mm x 230 mm
• Electr. connection IEC cable with plug (Euro, Swiss, UK depending of your country)
• Electr. voltage : 230V / 50Hz.
• Extraction noise : 62 db(A)

NEW - Now with the alcohol-free Disco-Antistat Ultraclean concentrate!

Practical care set for basic cleaning.

Makes LPs permanently antistatic, with Disco-Antistat Ultraclean Concentrate a concentrate that works deep into the groove and cleans the records gently and thoroughly.

The care set consists of:
• Washing case with inserted brushes made of goat hair.
• Label cover with suspension axle for LPs, singles and 10 inch.
• 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
• Disco-Antistat Mixture replacement bottle suitable for mixing the Ultraclean concentrate
• Funnel and filter with which the liquid is filtered back into the bottle after use.
• Drip stand (drying stand) with collection tray for 15 LPs or singles (slides into the case after use)

Made in Germany!

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

A freshly-cleaned vinyl record has so much more to offer: more information, more detail and better sound. That's why audio experts advocate cleaning not only your latest flea market finds but also your brand new LPs fresh from the press.
Clearaudio's smart matrix SILENT record cleaning machine combines scrupulous cleaning with oh-so-gentle handling of your precious vinyl collection. No more dust, dirt or chemical pressing residues. And, as its name suggests, this 'vinyl whisperer' comes with an exceptionally quiet operating mode. What's more, in its new enhanced edition the smart matrix SILENT is smarter than ever, sporting a raft of intelligent upgrades.

- The multi-functional cleaning arm deftly handles cleaning fluid application as well as suction, and is easily adjustable to any size of vinyl or shellac record.
- To start the cleaning process, simply swing the arm into place. No need to even press a button.
- Key components such as the motor, pump, cleaning fluid reservoir and waste fluid tank are now identical to those in our top-of-range ‘Professional’ model.
- Selecting functions and features is more intuitive and effortless than ever, thanks to new high quality, tactile push buttons for all controls.
- For ease of maintenance and transport the cleaning arm can be removed without the need for tools.
- The smart matrix SILENT is now available in a choice of silver or black, and is supplied with a matching universal clamp designed to hold any size of vinyl or shellac record securely in place.

Technical Specifications:
CONSTRUCTION PRINCIPLE
• Bi-directional rotation of the platter
• Integrated fluid application
• Very rigid chassis
• Included record clamp and single adapter
• Multifunctional cleaning arm for LPs, EPs and singles
• Easy controls

POWER CONSUMPTION
• Max. consumption: Approx. 300 watts
• Off mode: 0 watt (by switching off at the rear of the machine)

WEIGHT Approx. 10.6 kg
DIMENSIONS (W/D/H in mm) Approx. 345 × 345 × 235 (with record clamp) / Approx. 345 × 345 × 250 (with dustcover)
WARRANTY 3 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/cleaning/CA_smart%20matrix%20SILENT_E+D.pdf?d=1671461176

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

At last, a way to clean and restore your precious vinyl records without the use of expensive mechanical record cleaners, three step washing processes or dangerous petrochemicals. The university Award Winning RECORD REViRGiNiZER is the only product that can clean your vinyl records thoroughly and remove the pops and crackles from your valuable record collection.

"I am now sampling with the cleanest sound possible. Nothing fixes your records like Record Revirginizer!" - RZA, Grammy Award Winning Musician, Producer and Film Director.

Contains 500ml.

RECORD REViRGiNiZER isn't just a record cleaner, it actually restores your vinyl records close to their original condition by using a revolutionary anti-static polymer that works like a facemask on the grooves of your record. It's the closest thing to a miracle for vinyl record cleaning and restoration ever invented!

How it Works and More!

RECORD REViRGiNiZER is a viscous, non-toxic liquid that is poured onto a vinyl record. It is then massaged into the records surface and left to set. After setting it is easily peeled from the records surface, at the same time taking all the microscopic contaminants with it; it's a bit like a facemask...but for vinyl records!

REViRGiNiZER is formulated with just the right elasticity to remove all the embedded material, but at the same time it does not leave any residue, nor does it damage your vinyl in any way. The anti-static properties of the formula ensure that once the film is pealed off your vinyl will be static free. You can clean and restore your records close to their original condition and in some cases (due to residue left behind from the manufacturing mould release compounds) it can actually improve the sound of a brand new record as well.

With a REViRGiNiZER treatment your music will have a superior depth and clarity; this is another reason vinyl is enjoyed by audiophiles worldwide.

With a REViRGiNiZER treatment you can now sit back and enjoy your precious vinyl recordings just like they were new. We guarantee REViRGiNiZER is the best vinyl record treatment you can buy, or your money back!

We promise you that you will be amazed by the results. (Too bad we didn't think of it before the advent of CD's!)

How To Use:

1. Gently shake the bottle of REViRGiNiZER for 30 seconds before use.
2. Lay your vinyl record on a flat even surface, preferably on a clean record sleeve, and then wash hands.
3. Measure 20 ml / 0.65 fl.oz of REViRGiNiZER for a 30cm /12 inch record and pour evenly over one side of the record, avoiding the label. After you have used REViRGiNiZER a few times try reducing the amount to 15ml/ 0.5 fl.oz for a 30cm/12 inch record. Use 10ml / 0.3 fl.oz. for a 7 inch record.
4. Massage the REViRGiNiZER solution into the record’s grooves in a circular motion using one or two clean fingers.
5. Place a paper tab 5mm / 1/4 inch in from the outside edge of the record and over an area where the solution has already been applied. See illustration on bottle for approximate tab size.
6. Leave the REViRGiNiZER solution to dry completely. Drying time will normally take between 4 and 12 hours*. Drying time varies depending on humidity, evaporation and ambient temperature.
*Drying time can be significantly reduced by drying the record under a fan or in an air-conditioned room.
7. AVOID USING REViRGiNiZER ON RAINY OR HUMID DAYS unless records can be dried in an air-conditioned or dehumidified room or under a fan.
8. Once dry, use the paper tab to carefully peel the film from the record. DO NOT leave the film on the record longer than 3 hours hours after it has dried.
9. Remove any film that may still remain on the record by gently rubbing the remaining film with the dried film that has already been peeled off.
10. Repeat steps 1 to 9 on the other side of the record
11. Your record has now been restored with RECORD REViRGiNiZER.
12. If possible replace the old record sleeve with a new sleeve to avoid

Powder coated casing.

Starting in October 2024, all new Degritter Mark II machines will feature an upgraded casing with textured powder coating.

This improvement eliminates common issues such as greasy fingerprints, water stains, and scratches, making it easier than ever to keep the machine looking pristine. Our updated casings in classic black and new gunmetal silver offer increased durability and better resistance to everyday wear.

Additionally, the new casing no longer requires an AC switch. Our machines will now automatically detect voltage, seamlessly switching between 120V and 230V. This update adds an extra layer of protection, helping prevent potential damage caused by incorrect power settings.

Why the Change?

We’ve listened to feedback from our customers, and many found the previous anodized surface a bit tricky to maintain. By switching to powder coating, we’re offering a thicker, more resilient finish that is not only easier to clean but also resistant to UV radiation and scratches.

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.

Powder coated casing.

Starting in October 2024, all new Degritter Mark II machines will feature an upgraded casing with textured powder coating.

This improvement eliminates common issues such as greasy fingerprints, water stains, and scratches, making it easier than ever to keep the machine looking pristine. Our updated casings in classic black and new gunmetal silver offer increased durability and better resistance to everyday wear.

Additionally, the new casing no longer requires an AC switch. Our machines will now automatically detect voltage, seamlessly switching between 120V and 230V. This update adds an extra layer of protection, helping prevent potential damage caused by incorrect power settings.

Why the Change?

We’ve listened to feedback from our customers, and many found the previous anodized surface a bit tricky to maintain. By switching to powder coating, we’re offering a thicker, more resilient finish that is not only easier to clean but also resistant to UV radiation and scratches.

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.