Record Cleaner 44 Items

AFI flat.2 Record Flattener / Relaxer
The Audio Fidelity Improvement flat.2 is a cutting-edge multifunctional record flattener and relaxer. It flattens vinyl LPs, Maxis and Singles. Using special flat mats and high-quality control electronics the flat.2 achieves an utterly even distribution of heat and therefore results that have been out of reach until now.

Preset programs provide for very simple handling. The Standard program reliably eliminates most of the warps. In addition to that, there is an Expert program with flexible settings.

The flat.2 works very precisely and has several protective mechanisms to ensure very high product and process safety. Allocation of temperature on the surface as well as at the top and bottom is homogenous. Deviation of the target value represents less than 0,25 K.

Another distinctive feature of the flat.2 is the Relaxation program. The vinyl record is heated (and afterwards cooled) very slowly, evenly and controlled to temper the record. This thermal process of tempering is a traditional physical method and causes a considerable sound improvement in most cases.

A slim construction and first-class manufacturing out of special hard glass emphasize the elegant and timeless design.

Characteristics

• special flat mats for even distribution of temperature on every spot of the vinyl record
• homogenous heating surfaces in the interior of the machine
• smart and separate control of top and bottom side
• high-quality magnetic switches for safe contact and longevity
• simple handling of standard programs
• special program of thermal relaxation / tempering for sound improvement
• high process safety due to error detection and temperature restriction mechanisms
• easy-care high-class surfaces made of hard glass
• made in Germany

Technical Specifications

• power input: max. 90 VA
• maximum temperature: 59° C (Standard program), 54-60° C (Expert program)
• deviation of target temperature: less than 0,25 K
• size: 400 x 55 x 500 mm
• weight: 8,7 kg

Review: http://www.afi-record-flattener.com/download/AFI_record_flattener_review_image-hifi_2018.pdf

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.

A freshly-cleaned vinyl record has so much more to offer: more information, more detail and better sound. That's why audio experts advocate cleaning not only your latest flea market finds but also your brand new LPs fresh from the press.
Clearaudio's smart matrix SILENT record cleaning machine combines scrupulous cleaning with oh-so-gentle handling of your precious vinyl collection. No more dust, dirt or chemical pressing residues. And, as its name suggests, this 'vinyl whisperer' comes with an exceptionally quiet operating mode. What's more, in its new enhanced edition the smart matrix SILENT is smarter than ever, sporting a raft of intelligent upgrades.

- The multi-functional cleaning arm deftly handles cleaning fluid application as well as suction, and is easily adjustable to any size of vinyl or shellac record.
- To start the cleaning process, simply swing the arm into place. No need to even press a button.
- Key components such as the motor, pump, cleaning fluid reservoir and waste fluid tank are now identical to those in our top-of-range ‘Professional’ model.
- Selecting functions and features is more intuitive and effortless than ever, thanks to new high quality, tactile push buttons for all controls.
- For ease of maintenance and transport the cleaning arm can be removed without the need for tools.
- The smart matrix SILENT is now available in a choice of silver or black, and is supplied with a matching universal clamp designed to hold any size of vinyl or shellac record securely in place.

Technical Specifications:
CONSTRUCTION PRINCIPLE
• Bi-directional rotation of the platter
• Integrated fluid application
• Very rigid chassis
• Included record clamp and single adapter
• Multifunctional cleaning arm for LPs, EPs and singles
• Easy controls

POWER CONSUMPTION
• Max. consumption: Approx. 300 watts
• Off mode: 0 watt (by switching off at the rear of the machine)

WEIGHT Approx. 10.6 kg
DIMENSIONS (W/D/H in mm) Approx. 345 × 345 × 235 (with record clamp) / Approx. 345 × 345 × 250 (with dustcover)
WARRANTY 3 years*
* Provided the warranty card is fully completed and returned to Clearaudio within 2 weeks of purchase.

Manual: https://clearaudio.de/_assets/_pdf/manuals/cleaning/CA_smart%20matrix%20SILENT_E+D.pdf?d=1671461176

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

- Disco-Antistat Ultrasonic - now with NEW features!

Automatic ultrasonic record washing machine

Disco-Antistat Ultrasonic - The most thorough way to wash records!
Our record washing machine Disco-Antistat Ultrasonic combines over 45 years of experience in the care and cleaning of records with highly developed, state-of-the-art cleaning technology.

The combination of ultrasonic cleaning and our proven goat hair brush system ensures gentle, groove-deep cleaning of your records and an audible improvement in the sound image.

During operation, the cleaning fluid is permanently clarified by a filter system and dirt particles are filtered out to minimise impurities in the fluid and thus achieve the best possible cleaning result.
With our special cleaner, the record is treated antistatically and thus permanently prevented from renewed soiling by adhering dust.
Our washer is ready for use in just a few steps and the intuitive operation ensures optimal results from the very first record!

• The cleaning time can be conveniently adjusted to the level of soiling of the record, supported by a functional display. Possible cleaning time is between 1-5 minutes and can be set in steps of 10 seconds.
• A well visible progress indicator informs about the status of the cleaning at a glance. (1 LED = 10% of the set cleaning time).
• After use, the filtered cleaning fluid can be conveniently refilled into the bottle by pressing a button via the new solenoid valve.
• The permanent filtering of the liquid prevents it from accumulating coarse dirt particles. This ensures a consistent cleaning result.
• The aluminium-glass filter can be easily removed and reinstalled for cleaning.
• Inserting and removing the record is quick and easy thanks to the innovative magnetic coupling.
• Driven by a Bosch electric motor, the record rotates evenly in the new fibreglass-reinforced tub, achieving a homogeneous treatment with ultrasound (46kHz.).

Disco-Antistat Ultrasonic
Cleanliness you can hear! A powerful ultrasonic transducer (46kHz.) generates with so-called cavitation bubbles that act directly on the dirt and remove it gently and effectively.
The ultrasonic waves also reach places that are inaccessible to conventional cleaning methods and ensure cleanliness down to the depth of the groove.
The loosened dirt particles are then brushed off with the soft goat hair brushes.

Scope of delivery:
• Ultrasonic record washer
• 200ml cleaning concentrate Disco-Antistat Ultraclean (1302000)
• 1 litre Disco-Antistat BiDest, high-purity water (1302001)
• 1 microfibre cloth
• Label cover incl. axle with magnetic coupling (1302010)
• Power supply 230 VAC / 12 VDC 3A
• 1 drying rack (1302499)
• 1 sponge brush 50ml
• 1 Mixing bottle (for preparing the cleaning liquid from Disco-Antistat Ultraclean and Disco-Antist BiDest)
• Replaceable aluminium/glass filter for cleaning (1225211)
• Operating manual in 8 languages
• Dimensions: 360mm x 180mm x 235mm (W x D x H)

Made in Germany!

Kleeny MK2 Premium Record Cleaning machine

Made and engineered in Germany from experienced designers and technicans. This are the features:
• Beautifully designed, very compact housing that takes up little space
• Housing sides made of aluminum with leather-look covering
• Low operating noise thanks to noise insulation
• Silicone feet provide a secure grip and minimize structure-borne noise
• Adapter for dry vacuuming singles and 10 inch LPs included
• Robust traditional switches
• Ergonomic puck (record weight) with magnetic fixation - no screwing or clamping!
• Label protection by rubber lip
• Powerful, reliable platter motor rotates clockwise and counterclockwise
• Plate mandrel made of polished stainless steel
• Suction turbine with 250W power - does the drying in 2 revolutions!
• Platter mat made of soft, antistatic rubber
• Internal dirty water tank with drain spout, easy to empty. No hose or clamp required.
• Dry blow function protects against residual moisture and musty odor.
• Suction arm holder made of CNC milled aluminum
• Easy swinging in and out of the suction arm without screws
• Classic switch design

The robust switches could also be found in a classic sports car. The gear motor is switched on with the left switch. During washing, the direction of rotation should be changed several times by flipping the switch. The right-hand switch switches on the powerful suction turbine. It only needs 2 revolutions of the turntable and the record is dry. A high-quality record brush is part of the delivery programme.The unit can be emptied easily with the help of an outlet spout.

Secure protection for the label
The beautifully shaped puck has a sealing lip on its underside that protects the label from moisture penetration all around. Powerful magnets pull the puck onto the record. So nothing needs to be clamped or screwed. It couldn't be simpler.

Washing with premium brush attached by one click
The DRAABE Premium brush is included in the delivery. With Kleeny MK2 you don't need to hold the brush in your hand. It is simply clicked onto the wash arm. It adapts to the slight unevenness of the surface because it is suspended so that it can move. When the washing process is finished, you simply remove the brush and switch on the suction. It couldn't be simpler!

Scope of delivery - gets you ready to wash!
• Unit including, clamp, suction arm and platter mat
• Kleeny Service station with adapters for Singles and 10 Inch LPs
• Housing in noble leather look colour: bordeaux
• 200 ml Nessie cleaning lotion - ready to use, in suirt bottle for cleaning up to 40 records
• Premium record brush with click technology
• Connection cable with Euro, Swiss or UK Plug
• Manual in English language

Technical data:
• Dimensions without turntable: 280 mm x 145 mm x 230 mm
• Weight : 2,7 kg
• Power consumption "Suction" : 250 W
• Power consumption "Washing" : 12 W
• Power consumption "Stand by" : 0 W
• Diameter of turntable : 24.5 cm
• Dimensions with attached turntable : 375 mm x 245 mm x 230 mm
• Electr. connection IEC cable with plug (Euro, Swiss, UK depending of your country)
• Electr. voltage : 230V / 50Hz.
• Extraction noise : 62 db(A)

The FLUX-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.

After more than a year of development, we at Flux HiFi are now presented with the FLUX-Turbo. A plate brush with integrated suction. Sounds simple, but it isn’t.

The enemy of record reproduction is dust. This consists of many components. Silicates, polymers, organic substances, everything is contained. With a plate washing machine that works with a fluid, I get most of it cleaned, even release agent residues are removed. But what then? As soon as the valuable disc is put on, the dust falls on the record like snow. This creates some problems. Particles and hair settle on the needle, making scanning virtually impossible. For this purpose, the dust particles on the plate constantly cause enormous crackling noises, which lead to considerable distortions.

With a commercially available plate brush, the dust is collected, but with the exception of a few coarse particles that the brush absorbs, it is rather pressed into the groove floor and distributed, the Flux Turbo quickly provides a remedy. The suction force is so strong that almost all particles are sucked in, already in 1-2 revolutions.

The interior of the turbo is very complex. In order to achieve a well-usable suction force in this small, lightweight housing, each item had to be specially developed. From the fan wheel geometry to the shape of the suction channel, it has been optimized where it went. At the slightly inclined suction channel end you can easily see the integrated guidelines, which ensure that the whole surface is evenly extracted. An elaborate filter construction, the cartridge of which can be easily replaced, absorbs the dirt. The capacity ranges far beyond 100 applications, as well as the durability of the batteries.

Everything was thought of here. Even the velvet skids, which ensure that the surface of the record is not damaged, are easy to replace.

The brush insert made of real carbon fibers is additionally grounded, so that the sound patter is removed from the static charge, which attracts even more dust. The large contact strip under the switch is responsible for this. This is electrically connected to the conductive brush fibers.

The effect on playback is surprisingly strong. The sound seems liberated. Even complex music with strong controls is played back much less distortionally. Scanning noises, previously characteristic of analogue playback, are reduced by up to 50 by the suction before hearing. This is not about achieving clinically pure reproduction, but to get everything that is contained on the record out optimally. And that’s a lot. More than one dared to hope !

Simplicity is crucial when using the Flux Turbo. Quickly sucked over the plate and the pleasure can start. Hearing better records than ever before !

The FLUX-Hifi Vinyl-Turbo is a unique, completely newly developed device to quickly and easily free the record from dust and dirt. The Vinyl Turbo combines a carbon brush with an integrated, extremely powerful suction system.
For this purpose, a special cyclone with replaceable filter was developed, which makes it possible to realize a strong suction performance despite the small housing size (dimension 125 x 122 x 64mm).
Surface dust, as well as the dirt that sits deep in the groove, is extracted without residue within a few revolutions.

Only when the LP is free of dust can the pickup system scan the record without interference and distortion.

With the Turbo, a new era in record maintenance has begun.

• cleans and maintains your valuable records
• works without liquid and without additives
• quick and easy to use on the turntable
• increases the life of the plate and needle
• increases sound quality
• Filter cartridge and sliding skids available in a cheap double pack
• MADE IN GERMANY
• 3-year warranty
• Weight 229 g
• Size: 11,5 x 14 x 6 cm

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

NEW - Now with alcohol-free Disco-Antistat Ultraclean concentrate - NEW

Practical care set for record cleaning.
Disco-Antistat Ultraclean Concentrate, works deep into the groove and cleans your records gently and thoroughly even from stubborn dirt.

The care set consists of:
* Washing housing with inserted brushes made of goat hair and practical axle lock.
* Exchangeable cleaning brushes
* Label cover with suspension axle for LPs, singles and 10 inch
* 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
* Bottle for mixing the cleaning agent
* Funnel and filter with which the liquid can be filtered back into the bottle after use.
* Drip stand (drying stand) with collection tray for up to 15 LPs or singles (slides into the case after use).
* Housing with NEW - non-slip rubber feet - NEW
* NEW - Label cover with sealing rubber and hand crank for LPs/Singles/10".
* NEW - Filling line "max." - NEW for marking the filling level of the cleaning liquid.

Made in Germany!

Extra external water tank with lid, that can be used for quickly replacing water in Degritter record cleaning machine.

Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Two water tanks can also be used to clean records time efficiently – if water in one tank heats up after cleaning, another one with colder water can be inserted while the first tank cools down.

Expert 12 in 1 turntable care kit - A must-have accessory

The Lenco TTA-12IN1PRO is an aluminium suitcase containing all necessary accessories for taking care of your turntable and records collection.

The contents:
A record anti-static brush to clean your records, a stylus force scale to check the pressure of the stylus on the record, a cartridge azimuth and VTA protractor and a cartridge alignment protractor to make sure that your cartridge is perfectly aligned for the best sound performance.
4 small level gauges and a bigger level gauge to make sure that your turntable is perfectly horizontal.
In case you want to change your cartridge you will find pliers, 4 cartridge wires, 12 cartridge screws and a small screw driver.
To keep the stylus clean we provide a stylus brush.
Plus gauge & 45rpm adapter.

Included : Record anti-static brush, Stylus force scale, Cartridge azimuth and VTA protractor, Cartridge alignment protractor, 4 small level gauges, Pliers, 4 cartridge wires, 12 cartridge screws, Screw driver, Stylus brush, Big level gauge, 45rpm adapter

Record broom

Easy and effective cleaning arm

Cleaning a record collection can be tiresome. There are many ways to de-dust your precious collection. All of them have one thing in common, you have to clean the records while they are put at rest. Sweep it E goes the other way. You can enjoy listening to your records while they are being cleaned. Simply place Sweep it E on your turntable and make sure that the brush is placed before the needle. This way the grooves will get clean right before the cartridge can pick up sound from it.
Sweep it E is made out of durable and resistant aluminium to make sure it lasts a long cleaning-life. With the heavy weight base it stands firmly on your turntable. The uni-pivot arm follows the grooves of your record and cleans them effectively. When you don‘t need Sweep it E you can simply put the arm on its dedicated arm-rest for a comfortable placement. The soft hair-brush guarantees that the records won‘t be harmed during the cleaning process.

Features:
• Gently cleans your vinyl while playing
• Follows the grooves
• Heavy weight base for secure placement
• Uni-pivot design
• Easy setup
• Suitable for Primary, Essential and Debut turntables
• Elegant looks
• Durable materials
• Brush made of natural hair

Technical Specifications:
• Weight: 430 g
• Arm-length: 226 mm
• Arm material: Aluminium
• Brush: Hair

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

NEW - Now with the alcohol-free Disco-Antistat Ultraclean concentrate!

Practical care set for basic cleaning.

Makes LPs permanently antistatic, with Disco-Antistat Ultraclean Concentrate a concentrate that works deep into the groove and cleans the records gently and thoroughly.

The care set consists of:
• Washing case with inserted brushes made of goat hair.
• Label cover with suspension axle for LPs, singles and 10 inch.
• 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
• Disco-Antistat Mixture replacement bottle suitable for mixing the Ultraclean concentrate
• Funnel and filter with which the liquid is filtered back into the bottle after use.
• Drip stand (drying stand) with collection tray for 15 LPs or singles (slides into the case after use)

Made in Germany!

Adapter for cleaning 10″ records with Degritter record cleaning machine.

Adapter for cleaning 7″ records with Degritter record cleaning machine.

Practical care set for basic cleaning. Lasting antistatic effect with Disco-antistat mixture, a special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Made in Germany!

plastic vacuum tube 10 inch

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

The FLUX-Hifi VINYL-BRUSH is designed to free the record on the turntable from surface dust and static charging. A completely new design combines velvet pads with an integrated carbon brush. The special office ensures a flat cleaning of the plate surface, dust particles are completely removed. The carbon brush prevents static charging of the record. How crackling and crackling noises are minimized and prevents further dusting of the record. Only when the LP is free of dust can the pickup system control the record without noise and Scan distortions. For cleaning the needle, we recommend the FLUX-Sonic, the innovative electronic needle cleaner.

• special Office for Record Cleaning
• gentle dust removal
• integrated carbon brush
• prevents static charging
• ergonomic housing
• Combination of velvet and carbon fiber brushes
• Weight: 45 g
• Dimensions: 11,5 x 5 x 3,5 cm

The carbon fiber brush is primarily used to remove static from the record. Here it is very important that the fiber and the aluminum housing are electrically connected and the aluminum is not coated, otherwise the static dissipation cannot be realized.

The velvet takes the dust from the surface. Our velvet has a pile height of 1.2mm, the fiber is a multifilament yarn with a high basis weight of 500g/lfm.

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

AT617A - CARTRIDGE STYLUS CLEANER
- Specially formulated polyurethane gel removes dirt particles from stylus
- Gel remains tacky for years
- Surface is washable for repeated use

Spare parts package for the record washers Generation II + Generation II PLUS.

• 1 sealing shell incl. crank axle *NEW* with 105mm diameter *NEW*
• 2 sealing rings
• 2 spare brushes
• 2 screws for axle holder
• 2 axle holders
• 1 set of non-slip rubber feet

Also suitable as upgrade from Generation II to II PLUS!

Made in Germany!