Mixers 160 Items

A Cut Above The Rest

Numark Scratch is a 24-bit two-channel mixer that redefines what you can do with an affordable 2-channel scratch mixer. With Scratch, you’ll be able to create and perform at a higher level than you ever thought was possible—especially with a mixer in the affordable price category. Scratch combines professional-level performance and outright DJing fun in a way nothing else ever has. You’ve got to experience it to really see what it’s all about!

Scratch is really something special—It brings a new look and design to the mixer category. It boasts an all-metal build with professional features such as a built-in Innofader crossfader, performance pads, instant loop encoder, and toggle paddles to trigger software-based effects. To top it off, it comes with Serato DJ Pro and Scratch is Serato DVS ready.

Performance Pads

Its soft responsive performance pads give you the freedom to access cues, rolls, and sampler quickly. The pad mode makes it very convenient to set hot cue points, roll temporary loops, and trigger samples at ease.

Software FX

Six dedicated software-based FX to apply to individual channel or both using the premium performance base toggle paddles. You can adjust your FX mix from Dry to Wet as you feel the mix.

24-Bit Digital Sound Quality

Play your best with the best! With amazing sound quality thanks to its 24-bit circuitry, the sound is pristine. Your digital song collection never sounded so good, whether you’re using Serato DJ Pro or other preferred software. This is also a great mixer to play vinyl records, with a full EQ and a dedicated low/high pass filter.

Innofader Crossfader

Our butter-smooth Innofader crossfader is designed with the turntablist in mind to perform most intricate and accurate scratches. You have two switches above the crossfader; 1.) reverse the channels and the other 2.) change the slope for a hard cut or a soft curve for mixing.

DVS Ready
Easily connect to the Numark Scratch, whether you use traditional turntables or media players. Scratch unlocks Serato DVS for Serato DJ Pro instantly.

Instant Loop Encoder

Looping made easy. Keep the beat going by pressing the encoder down, and it will lop to the default parameters set in your software. Turn the knob to the right to extend the beat and to the left to shorten the loop.

Connectivity

Scratch has all the necessities with premium features for any setup. There is an XLR main output and unbalanced booth output for the best booth/dance floor experience. There are unbalanced inputs for both line and phono inputs for each channel. A microphone/auxiliary input for XLR or ¼-inch TS controlled by the mic level knob on the mixer gives you all the versatility you could ask for.

The Numark Scratch comes with a bundle of offers when registering their Scratch on Numark.com. DJs will receive a 2-month trial period of SoundSwitch premium DJ lighting software.

The Numark Scratch was built from the ground up by DJs for DJs!

FEATURES
• Serato DJ Pro with DVS License Included Ready to Connect Timecoded Records or Deck Controllers*
• Innofader Scratch Crossfader with Reverse and Slope Control
• 6 Quick Launch Effect Triggers with Dual Paddles and Dry/Wet FX Control
• 4 Performance Pads Per Deck to Access Cues, Rolls and Samples
• Filter Knobs to Create Audio Sweeps
• Dedicated Instant Looping Knobs
• Combo Mic Input (XLR/¼-inch) with Tone Control
• Dual Headphone Output Cueing System (¼-inch/1/8-inch)
• 24-bit Digital Sound Quality
• *Serato Control Vinyl/CD available separate

Power supply
• Internal 100v – 240v

Dimensions
• 12.05" (L) x 9.61" (W) x 3.32" (H)

ETERNAL Crossfader is an inductive fade technology based on a magnetic control patented by Ecler. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field created between two sets of coils. This electromagnetic modulation controls an assigned Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless technology is combined with a custom high quality glides mechanism to offer a very smooth touch and succeed the most accurate Crossfader system.

The ETERNAL concept does have obvious advantages upon other existing Systems using optical technology. Unlike optoelectronic elements, the inductive concept is resistant to smoke, moisture, temperature and aging. Other electromagnetic systems found on the market are particularly sensible to the lateral room of the mechanism, and have heavier mobile elements (magnets or iron plates) that add an excessive weight to the crossfader. Such systems usually have a strange feel that can bother highly precise manipulations such as Scratching and Beat Juggling.

Field technology tested over 20.000.000 Operations, Eternal Crossfader is the revolutionary fader admired for turntablism djs and hip hop community. Suitable with NUO2.0, and the NUO3.0, NUO4.0 and HAK Series legacy products.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Der Kutter ist das ideale Übungstool für alle Turntablists, die auch unterwegs nicht darauf verzichten wollen, an ihren Routines zu feilen. Im Gegensatz zum Frisk Fader verfügt der Kutter über zwei Audioeingänge, wobei Kanal 2 auf „through“ gestellt werden kann um die Musik im Hintergrund auch bei bewegtem Fader durchlaufen zu lassen. Der Kutter bietet eine Crossfader-Reverse-Funktion, auch bekannt als Hamsterswitch. Das kratzfeste Gehäuse verfügt über ein elegant schlankes Design und funktioniert dank der analogen Schaltung ohne Batterien. Über den Audio Ausgang wird der Kutter beispielsweise an eine Stereoanlage oder einen aktiven Lautsprecher angeschlossen. Drei Miniklinke-Kabel gehören zum Lieferumfang.

Features
⦁ Transportabler Crossfader
⦁ inkl. 3x Miniklinke-Kabel und Klettband zur fixierung
⦁ Stereofader (Cuts auf beiden Seiten)
⦁ 2 Eingänge
⦁ 1 Ausgang
⦁ Hamsterswitch (Crossfader-Reverse)
⦁ Post-/Throughfader (Kanal 2)
⦁ Schlankes Design
⦁ Top-Panel ohne störende Schrauben (auf Unterseite geschraubt)
⦁ Betrieb ohne Batterien
⦁ Designed by STOKYO Japan
⦁ Montiert in Japan
⦁ Verpackung aus wiederverwertetem Material
⦁ Farbe: rot

Lieferumgang:
Kutter, 3 Miniklinke-Kabel, Anleitung, Klettband
Abmessungen: 40 x 78 30mm
Gewicht: 40g

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Omni Portable Turntable Tone Arm Tension Mod by Tiny Steppa

Enhance Durability. Unleash Potential.

"The tone arm tension design in the Omni is actually very simple, with the two rubber bands doing their job well. However, we're aware that rubber bands can become hard and lose elasticity over time, much like changing a platter belt after a long while. This modification gives you an option to enhance durability, and elevate Omni's potential."

Easy stylus weight adjustment: Fine-tune the stylus weight with your fingertips.
Tone arm protection: Nylon screws prevent tonearm coating damage during setup.
Simple installation: Quick and user-friendly assembly.
Tool kit included: All necessary tools are in the package.
Omni certified: Meets quality and compatibility standards.

Installation video can be found here:
https://www.youtube.com/watch?v=ctHskU8k67c

Watch the adjustment video here:
https://www.youtube.com/watch?v=TDKhq1hTC3s

The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the mixed music style.
Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features!

Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.

Key features:
• 2 mixing channels
• 1 MICRO/LINE channel
• 2 PHONO inputs
• 3 LINE inputs
• Master output XLR and RCA
• Booth output RCA
• 3 band full cut EQ
• Extra large ergonomic EQ knobs
• 3 band EQ kill switches
• FX Send control per channel
• FX Pre/Post fader selector
• 45mm long life VCA faders
• 45mm long life VCA crossfader
• Fader and crossfader shape adjustment
• Crossfader Reverse and Cut-In
• Crossfader suitable for ETERNAL

Technical data:
• Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kΩ
PHONO: -40dBV/50kΩ
MICRO: -50dBV/>1kΩ
FX RETURN: 0dBV/>6kΩ

• Outputs Level/Minimum Load:
MASTER (BAL): 0dBV/600Ω 1V *(+6dB 2V)
MASTER (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
BOOTH (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ

• Frequency Response:
LINE: 10Hz÷30kHz -1dB
MICRO: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB

• THD+N:
LINE: <0.07%
MICRO: <0.1%
PHONO: <0.15%
FX RETURN: <0.05%

• CMRR:
MICRO: >70dB @ 1kHz

• Signal Noise Ratio:
LINE: >95dB
MICRO: >85dB
PHONO: >90dB
FX RETURN: >100dB

• Gain control:
INPUTS 1-2: ± 15dB
INPUT 3: ± 20dB

• Tone control Inputs 1-2:
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

• Tone control Input 3:
BASS: ± 15dB
TREBLE: ± 15dB

• Kill Filter, cut frequency at –6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz÷6.8kHz
TREBLE: 6.8kHz

• Phantom voltage: +18VDC/5mA max.
• Mains: 90-264VAC 47-63Hz
• Power consumption: 30VA
• Dimensions: 370x165x80mm
• Weight: 3kg

The WARM4 is a professional analogue rotary DJ mixer with four channels, developed and produced by ECLER in Barcelona.
It has 4 phono/line channels, 2 microphone inputs, classic sharp filters and a 4th order isolator. The WARM4 also includes a unique feature: an analogue subharmonics synthesizer that can be selected per channel and is specifically designed to generate and amplify ultra-low frequencies.
The WARM4 is ECLER's latest analogue rotary mixer, inspired by New York's disco "Paradise Garage", also referred to by François Kevorkian as the "Temple of Music", whose influence has been instrumental in shaping some of today's best clubs. Designed and manufactured in the Barcelona factory, the WARM4 is a mixer that keeps the classic structure of ECLER mixers in mind, but incorporates completely redesigned circuitry and mechanics. This ranges from new circuit boards that further improve the noise floor and dynamic range, to the rotary pots that are carefully hand-assembled by our production team.
Staying true to the innovative spirit since the first A4 mixer in 1971, ECLER presents a DJ tool never before included in a mixer: an analogue subharmonics synthesiser. Inspired by the original device from the "Paradise Garage" DJ booth, we have developed our own circuit that allows the subharmonic generator to be tuned to different frequencies so that the DJ can adapt it individually to the track and the respective sound system.
The WARM4 also features the 4th order isolator already included in the WARM2, as well as 4 mixing channels, 3-band equaliser with full cut per channel and high quality potentiometers from Alps with metal axis. Using an external effects module has also never been easier. The WARM4 can output a PRE/POST fader signal and lets you control and pre-listen to the return signal.
The WARM4 is designed specifically for sound systems that can reproduce subsonic frequencies - for clubs, festivals and events where bass response is crucial.
Unleash a whole new dancefloor experience and take the music experience to the next level!

Technical details:
AUDIO PERFORMANCE
INPUTS:
-
Number of inputs:
LINE: 4 stereo unbalanced inputs
PHONO: 4 stereo unbalanced inputs
MIC: 2 mono balanced inputs
FX RETURN: 1 stereo unbalanced input
Connection types:
LINE 1-2-3-4: RCS STEREO
PHONO 1-2-3-4: RCS STEREO
MIC 3: XLR3-F
MIC 4: Combo XLR3-F/6.3mm jack balanced
FX RETURN: RCS STEREO
Input sensitivity nominal / impedance:
LINE: 0 dBV / 50kΩ
PHONO: -40 dBV / 50kΩ
MIC: -50 dBV / >1kΩ
FX RETURN: 0 dBV / >6kΩ
POWER:
-
Frequency response:
LINE: 10Hz÷30kHz -1dB
MIC: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB
THD+N:
LINE: <0.004%
MIC: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%
CMMR (Common-Mode Rejection Ratio):
MIC: >75dB at 1kHz
Signal-to-noise ratio:
LINE: >105dB
MIC: >90dB
PHONO: >100dB
FX RETURN: >110dB
Trim control / tone control for inputs 1-2-3-4:
INPUTS 1-2-3-4: ±15dB
BASS: +10/-30dB
MIDDLE: +10/-25dB
TREBLE: +10/-30dB
Trim control / tone control for the isolator:
BASS: +12/-70dB
MIDDLE: +12/-40dB
HIGH: +12/-70dB
Sound filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MIDDLE: 200Hz÷6.8kHz
HIGH: 6.8kHz
Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz÷4kHz
MIDDLE:
HIGH: 4kHz
Analogue subharmonics synthesiser:
Input selective filter: 50÷120Hz
Harmonics synthesis: 25÷60Hz
Maximum output level: +12dBV
OUTPUTS:
-
Number of outputs:
HOUSE: 1 stereo balanced outputs / 1 stereo unbalanced outputs.
BOOTH: 1 stereo balanced outputs / 1 stereo unbalanced outputs
HEADPHONES: 2 stereo unbalanced outputs
FX SEND: 1 stereo unbalanced output
REC: 1 stereo unbalanced output
Connection types:
HOUSE: XLR3-M STEREO / RCS STEREO
BOOTH: XLR3-M STEREO / RCS STEREO
HEADPHONES: jack stereo 6.3mm / jack stereo 3.5mm
FX SEND: RCS STEREO
REC: RCS STEREO
Output level / Minimum load:
HOUSE (balanced): 0dBV/600Ω 1V *(+12dB 4V).
HOUSE (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (balanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
BOOTH (unbalanced): 0dBV/2.2kΩ 1V *(+12dB 4V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ
Maximum undistorted output level:
HOUSE (electrically balanced): 21dBV (23dBu)
BOOTH (electrically balanced): 21dBV (23dBu)
HOUSE (unbalanced): 21dBV (23dBu)
BOOTH (unbalanced): 21dBV (23dBu)
ELECTRICAL
Power supply: Internal
AC mains voltage: 90-264VAC 47-63Hz
AC mains plug: 15A IEC inlet plug
Rated power consumption: 39 VA
OTHER
Control mode: Rotary with Alps Blue Velvet potentiometers and Alps RK09L potentiometers
Phantom power: 18VDC/5mA max (ON by default)
Input VU meter: LED 12 segments (-38dBV ÷ +10dBV)
House Mix Booth VU meter: LED 12 segments (-30dBV ÷ +20dBV)
Subharmonics output VU meter: LED 3 segments (-20dBV / 0dBV / +4dBV)
PHYSICAL
Operating temperature: -5˚C ÷ 45˚C
Operating humidity: 20 - 90% RH (no condensation).
Storage temperature: -10°C ÷ 50˚C
Storage humidity: <90% RH (no condensation)
Installation options: Desktop or rack mounting with optional accessories.
Accessories included: IEC cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm
Weight: 5.32 kg
Shipping dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm
Shipping weight: 6.74 kg

2-CHANNEL BLUETOOTH DJ MIXER IN COMPACT CONSTRUCTION
The RMX-10 BT is a compact 2-channel DJ mixer, which facilitates wireless music streaming directly to the mixer via the integrated Bluetooth interface.

BUILT-IN BLUETOOTH CONNECTIVITY
This way it is possible to use a smartphone or tablet as playback source and route the signal through the mixer. The Bluetooth signal can be routed to both channels.

45 MM CROSSFADER AND TWO SMOOTH-RUNNING LINE FADERS
Moreover, the 45-mm crossfader is user-replaceable and the smooth linefaders make mixing more comfortable.

CHANNEL STRIPS WITH 3-BAND EQ AND GAIN ADJUSTMENT
Each channel has an individual gain control and 3-band EQ that raises or lower the frequencies at 100 Hz, 1 kHz and 10 kHz.

6.3 MM HEADPHONES OUTPUT & MIC INPUT
The RMX-10 BT has a 6.3-mm microphone input with separate volume adjustment, as well as a 6.3-mm headphones output with volume adjustment and cue-mix function.

ROBUST ALL-METAL CONSTRUCTION
Master output volume can be monitored via LED level chains. The space-saving and sturdy construction is made of metal.

•2-channel Bluetooth DJ mixer in compact design
•Bluetooth connectivity: wireless music streaming directly to your mixer
•Extremely space-saving and robust all-metal construction

FEATURES
•2-channel Bluetooth DJ mixer in compact construction
•Built-in Bluetooth connectivity: wireless music streaming from your smartphone/tablet directly to your mixer
•Flexible Bluetooth routing on both channels
•Replaceable 45 mm crossfader and two smooth-running line faders for mixing
•Channel strips with 3-band EQ and gain adjustment
•6.3 mm headphones output with volume control and cue mix function
•6.3 mm mic input with dedicated volume control
•Master signal LED level chains
•Extremely space-saving and robust all-metal construction

TECHNICAL DATA
•Power supply: AC 100 - 240V, 50/60 Hz
•Power consumption: 3.5W
•Frequency response: 20 Hz - 20 kHz
•Inputs: 2x Phono RCA, 2x Line RCA, Mic TS, 1x Bluetooth In
•Outputs: Master RCA, Rec RCA, headphones 6.3 mm jack
•EQ range at 100 Hz, 1 kHz, 10 kHz
•Dimensions: 180 (w) x 260 (d) x 70 (h) mm (potentiometers: 21.5 mm)
•Weight: 1.72 kg
•Accessories included: Power cord and operating instructions

ELITE

• High Performance DVS Mixer for Serato DJ Pro, developed in close collaboration with renowned international turntable artists
• 16 large, velocity sensitive RGB performance pads: Control up to 12 performance modes per deck
• DUAL 24-bit interface & 3x non-contact Innofader Pro with high-resolution technology

POWER UP YOUR PERFORMANCE POTENTIAL
Reloop ELITE is a professional DVS mixer for Serato DJ Pro, developed in close cooperation with international turntable artists. Due to the combination of a performance-oriented layout and powerful features, ELITE allows you to fully realise your DJ potential. The full version of Serato DJ Pro, including the DVS Expansion Pack, is provided plug 'n' play. Additionally, ELITE comes with two Serato control records with NoiseMap™ technology.

DUAL 10 IN/OUT USB 2.0 AUDIO INTERFACE & ERGONOMIC BROWSE SECTION
ELITE comes equipped with a powerful DUAL 10 In/Out USB 2.0 Audio Interface, which offers outstanding sound characteristics in 24-bit resolution. Two computers can be connected at the same time via both USB ports. This way a seamless transition from one DJ to another during performance becomes as easy as possible. In the battle mixer's center you find the ergonomically designed browse section, that allows efficient one-handed control and which can be switched independently from the source selection (USB A or B) via the Focus computer control.

2x OLEDs & DEDICATED LOOP CONTROL
The two OLED displays show real-time information regarding effects, BPM, beat parameters and setup menu. Each deck has a separate loop section which can be controlled intuitively, thanks to the push encoder which also disposes of a manual loop function. Via the LED bar the selected loop length is directly visible.

INDIVIDUAL PAD MODES
In combination with the RP-8000 MK2 it is possible for the first time to control the pad modes on various devices individually and simultaneously.

SMART LINK USB HUB
External devices, such as MIDI controllers, storage media or smartphones can be connected and loaded via the two smart link USB ports. When connecting RP-8000 MK2 turntables, these will automatically recognize the corresponding deck (1 or 2). All of ELITE's control elements are MIDI compatible and can be used to control any compatible software.

STURDY METAL CONSTRUCTION WITH RESISTANT FINISH IN DEEP BLACK METALLIC
Thanks to the sturdy construction of robust metal and high-quality control elements, such as the screwed metal potentiometers, ELITE is built and ready for rough daily life. The two high-retention USB ports guarantee a safe connection and offer protection against unwanted signal loss. The surface is processed with a hard-wearing finish, which is especially resistant against scratches and is finished in a timeless deep metallic black.

INCLUDING BPM SUPREME VOUCHER
With any purchased ELITE the DJ record pool adds a 90 days Premium Membership with a value of 60 $ for their huge audio and video library - containing latest releases directly received from the record labels.

FEATURES
• Professional DVS Performance Mixer for Serato DJ Pro
• Developed in close collaboration with renowned international turntable artists
• Control up to 12 performance modes per deck
• 3x mini Innofader Pro (latest generation) on-board, featuring twice the resolution and innovative non-contact technology, allowing for ultra precise cuts and smooth operation
• 2 high-contrast OLED displays showing real-time information of effects, BPM, beat divisions and setup menu
• Colour-coded Tweak FX: stand-alone effects with bipolar control
• Toggle between Filter, Crush, Flanger, White Noise and user mode via the mode button with RGB indication
• DUAL 10 In/Out USB 2.0 audio interface with superb sound quality in 24-bit
• Two independent effect units for controlling Serato DJ Pro FX
• 3 assignable effect slots: each with dedicated activation buttons
• Dedicated and flexible effect controls for each channel
• Mini-fader for FX Level/Depth control
• 2 FX activation modes: either hold or toggle on/off
• Combines a performance-oriented layout with powerful features
• 16 large, velocity sensitive RGB performance pads
• 4 mode buttons, three layers with 12 performance modes (Hot Cue, Loop Roll, Slicer, Sampler, Pitch Play, Saved Loop, Slicer Loop, Saved Flips, Platter Play, Transport, user mode and the brand new scratch bank mode) and dual layer parameter buttons per side
• Performance pad modes can be controlled independently on each deck
• Enhanced performance with RP-8000 MK2 turntables: for the first time, pad modes can be controlled individually on each device simultaneously
• Customisable fader curves and reverse function (hamster switch)
• Digital adjustment of cut in/out points in the setup menu
• Dedicated loop section with push encoder, loop length LED bar & manual loop control
• Ergonomically designed browse section for efficient one-handed use
• Convenient cue fader system with dedicated controls for volume and mix
• Easily switch between 2 computers using the Focus PC controls
• Extensive USB routing capabilities: sampler and AUX channel can be individually routed through the Serato FX units (send/return)
• 3-band isolator EQ with full kill characteristic
• Smart Link USB ports: auto RP-8000 MK2 deck recognition
• Can also be used as an active USB hub for external devices
• Mic/line input with 2-band EQ, independent echo effect and on/off talkover switch
• 2 headphone outputs via 6.3/3.5 mm stereo jack
• Booth ouput in stereo or mono
• MIDI-compatible control elements
• High retention USB ports
• Rock-solid construction in a durable metal design
• High-quality and hard-wearing deep black, metallic finish
• Kesington Lock to secure the device
• Incl. full version of Serato DJ Pro with DVS Expansion Pack, 2x Serato Control Vinyls with NoiseMap™ technology, USB cable, power cord, operating instructions and 90 days BPM Supreme membership

TECHNICAL DATA
• Frequency response: 20 Hz - 20 kHz
• Inputs: 2x phono RCA, 2x line RCA, AUX RCA, mic/line TRS, 2x Smart - Link USB ports (type A), 2x USB ports (type B)
• Outputs: Master XLR (balanced), master RCA (unbalanced), booth TRS (balanced), rec RCA (unbalanced), headphones 6.3/3.5 mm stereo jack
• EQ range at 70 Hz, 1 kHz, 13 kHz: -∞ dB (total kill)/+9 dB
• EQ range Mic at 100 Hz, 10 kHz: -12 dB/+12 dB
• Dimensions: 290 (w) x 414 (d) x 107.5 (h) mm (potentiometers: 18.5 mm)
• Weight: 6 kg
• Software requirements: Serato DJ Pro 2.1.2

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238128_Reloop_IM.pdf

Two-Channel Analogue Rotary Mixer

WARM2 is a professional two-channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring two phono/line channels and a micro/line channel, classic sharp filters, a 4th order Isolator and a narrow portable format, it will deliver a warm and crystal clear analogue sound. All circuits are strictly designed, mounted and tested at Ecler facilities in Barcelona, in order to offer the best professional grade in quality and reliability. With over 50 years of experience in analogue audio design and for the first time after 13 years, Ecler proudly presents our WARM2 rotary mixer.

Key features:
• 2+1 Mixing channels
• 1 MICRO input
• 2 PHONO inputs
• 3 LINE inputs
• Master Output (HOUSE) on XLR and RCA connectors
• Booth Output on RCA connectors
• 6.3mm J ack and 3.5mm mini-jack Headphone Monitor Outputs
• 3 band full cut EQ for main channels and 2 band full cut EQ for MICRO/LINE channel
• 3 bands isolator (300Hz and 4KHz, -∞ /+12dB, 4th order 24dB/oct )
• Maximum Output without distortion: 21dBV (23dBu)
• Mechanized from a solid block of aluminum knob, without visible screw. Ecler Unique design
• Alps Blue Velvet Potentiometers
• FX Send control and Pre/Post fader selector
• Screen-printed faceplate by selective anodizing
• Wooden side panels included

Technical data:
• Control Mode: Rotary with Alps Blue Velvet Potentiometers
• Phantom Voltage: 18VDC/5mA Max (Default ON)
• MIX and PFL VU-Meter: LED 12 segments (-30dBV ÷ +20dBV)
• Operation Temperature: -5˚C - 45˚C / 23˚F - 113˚F
• Humidity: 20 - 90% RH (no condensation)
• Mains voltage: 90-264VAC 47-63Hz
• Rated power consumption: 30VA
• Dimensions (without wooden sides): 400 x 185 x 100mm / 15.7” x 7.2” x 3.9”
• Weight: 3.6Kg / 7.94 lbs

MULTI-FUNCTIONAL
The Reloop RMX-44 BT is a 4-channel Bluetooth DJ club mixer in classic design, including a Bluetooth input with cue function, which offers numerous application possibilities. The intuitive Club mixer layout guarantees a simple overview and allows experienced artists to find their way around immediately.

FLEXIBLE USABILITY
With 9 inputs and 4 outputs, as well as a 3-band EQ and bipolar filter unit per channel, the RMX-44 BT is not only a full-fledged DJ club mixer, but thanks to Bluetooth compatibility and the 2-band EQ microphone section with talk-over function, it is also ideal for bars, mobile DJs and home setups.

UNIVERSAL CONNECTIVITY
Thanks to the Smart Connectivity Bluetooth input, Smartphones, laptops as well as iPad’s and other devices can be connected quick and easily. In combination with its numerous other connection opportunities, the RMX-44 BT is up to any challenge and adapts perfectly to any application.

FREQUENCY MIXING IN DIGITAL SOUND ARCHITECTURE
For creative frequency mixing, the RMX-44 BT offers dedicated, bi-polar sound filters per channel to allow smooth low- and high-pass fading. The fully digital sound architecture enhances your sound to be clear and punchy in every situation.

HIGH QUALITY DESIGN
The sturdy metal construction and scratch-resistant surface with a deep black metallic finish make the RMX-44 BT extremely durable, despite frequent use and transport. The fabrication meets the industry’s highest quality standards and is visually and haptically particularly attractive. In addition, the stylish and timeless design blends perfectly into any DJ setup.

FEATURES
• 4-channel Bluetooth DJ club mixer
• 9 inputs, 4 outputs
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs
• Smart connectivity Bluetooth input with cue function
• 3-band EQ
• Sound filter, bi-polar filter unit with LPF and HPF
• High-quality surface in deep black metallic
• Fully digital architecture for outstanding sound
• Sturdy metal construction
• RMX Innofader compatible
• Crossfader curve adjust
• Mic channel with 2-band EQ & talk-over ''Active Ducking Technology'' for mic channel
• Headphones output (6.3 mm jack)
• Incl. power cord, instruction manual

TECHNICAL DATA
• Frequency range 20 Hz – 20kHz
• Inputs: 2x Phono RCA, 6x Line RCA, 1x Mic XLR/Jack
• Outputs: 1 Master XLR (balanced), Master RCA (unbalanced), Booth RCA (unbalanced), Rec RCA (unbalanced), headphones (6,3 mm jack)
• EQ range classic at 70 Hz, 1 kHz, 13 kHz: -8 dB/+9 dB
• Dimensions: 320 x 106.4 x 379.4 mm
• Weight: 5,4 Kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/4/3/243591_Reloop_IM.pdf

Mix instinctively with pro-grade features
The DJM-250MK2 has inherited some of the professional features of the popular DJM-900NXS2, such as the Magvel crossfader and Sound Color FX filter. Straightforward controls, a clear layout, and dedicated 3-band isolators let you scratch and mix instinctively.

The dithering technology on this mixer results in warm, high-quality audio from both analogue and digital sources. Plus its built-in sound card lets you connect the mixer to your PC/Mac and use rekordbox to perform with CDJs. Or hook up the DJM-250MK2 to turntables and use rekordbox in combination with our control vinyl to scratch and mix with digital files stored on your computer.

KEY FEATURES

Clear Layout & Magvel faders
The clear layout of the DJM-250MK2’s lower half gives you freedom to perform complicated scratch techniques. Our robust Magvel Faders ensure smooth control over long-term use. 2 metal shafts support the fader knobs, while the contact-free magnetic system is designed to endure millions of movements.

Smooth Mixing
Precise, fluid mixes are a breeze using the mixer’s channel faders, and the 3-band isolators give precision across the highs, mids and lows. You can use them to totally eliminate each frequency range when you turn the knob all the way to the left.

Flagship Filter FX
Each channel comes with its own dedicated Sound Colour FX filter, a feature inherited from the DJM-900NXS2 mixer. Simply turn the knob on each channel to apply the filter, Twist the parameter knob for texture, playing with resonance and tension.

Built in USB Sound Card
Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer’s hard drive.

Performance features
Unlock rekordbox performance features by simply connecting the unit to your PC/Mac. And, if you subscribe to the Creative plan, use Cloud Library Sync for seamless library management across multiple devices, and easily make custom versions of tracks in Edit mode.

DVS control
Make full use of rekordbox's low-latency DVS control for intuitive, smooth scratching.

High-quality sound
Whether you’re playing from digital or analogue sound sources, a warm, high-quality sound is created by the 64-bit digital signal processor using dithering technology.

Two headphone outputs
The DJM-250MK2 lets you plug both an ¼-inch stereo jack and 3.5-mm mini jack. Pick your size or attach 2 headphones when playing back-to-back.

Independent MIC section
Use a microphone and the AUX input at the same time.

Flexible connectivity
The XLR terminal and RCAs deliver premium sound quality on all connections. And the signal GND terminal easily attaches ground wires from analogue turntables.

TRAKTOR DVS control
This mixer supports DVS control of Native Instruments’ TRAKTOR PRO 3 DJ software. Plug your PC/Mac into this unit and use the TRAKTOR SCRATCH control media (control vinyl or CDs) to intuitively control and scratch with digital audio files stored on your computer.
Find out more about the Pioneer DJ Certified program.

Firmware Update Manager
You’ll be automatically notified when firmware updates become available. You can download the Firmware Update Manager.

SPECIFICATIONS

Main Features:
DVS Control:
• rekordbox

Accessories:
• DJM-250MK2
• Power cord
• AC adaptor
• USB cable
• Operating Instructions (Quick Start Guide)
• Warranty

Specifications:
• Width: 230 mm
• Height: 108 mm
• Depth: 320 mm
• Sampling Rate: 48 kHz
• A/D Converter: 24 bit
• D/A Converter: 24 bit
• Power Supply: AC adaptor (DC 12 V)
• S/N Ratio Line: 94 dB
• Frequency Range: 20 - 20000 Hz
• Distortion: < 0.005 % (LINE)

Channels:
• EQ/ISO: 3 band
• EQ/ISO Range: -∞ ~ +6 dB

Performance Control
• Channels: 2
• Sound Colour FX: Filter

Terminals:
Inputs:
• 3 LINE (RCA)
• 2 PHONO (RCA)
• 1 MIC (1/4 inch TS Jack)
Outputs:
• 1 MASTER (XLR)
• 1 MASTER (RCA)
• 2 HEADPHONE MONITOR (1/4 inch Jack, mini-jack)
USB:
• 1 USB B port

FIRST-CLASS DJ MIXER
The RMX-60 Digital is a first-class mixer for any DJ application. With its extensive range of connection options, robust construction and fully-digital audio architecture; Reloop’s latest mixer takes the classic 4+1 channel mixer design and updates it to suit modern performance standards. Whether you’re using CD players, Turntables, DJ controllers or DVS systems – the RMX-60 Digital’s 11 input and 6 output options bring true versatility into the DJ booth.

ADJUSTABLE LINE- AND CROSSFADER CURVES
To suit different mixing and scratching styles the RMX-60 Digital’s line- and crossfader-curves are adjustable, and there’s also a linefader start function. The crossfader is freely assignable between all channels, and the stock fader can also be switched for the new RMX Innofader by Audio Innovate, which is specifically designed for Reloop mixers to offer a gentle, gliding performance.

ACTIVE DUCKING TECHNOLOGY
The RMX-60 Digital is a true all-round club mixer. Neat finishing touches such as the “Active Ducking Technology” for the mic channel, and the future-proof firmware system that can be retro-updated by connecting to a computer, elevate this to a mixer that can support any type of DJ for years to come.

FEATURES
• Classic 4+1 channel performance club mixer
• 11 inputs, 6 outputs
• Fully digital architecture for outstanding sound and flexibility
• 8 high-quality performance effects in studio quality (flanger, delay, echo, reverb, gate, pitch shift, phase, bit crusher, noise)
• Large, clearly arranged parameter display
• Bipolar filter per channel
• Adjustable EQ characteristics (kill & classic)
• InnoFader compatible (RMX InnoFader available separately)
• Crossfader assign switch per channel
• Mic channel with 2-band EQ & talkover ''Active Ducking Technology'' for mic channel
• 2 headphones outputs (jack and mini jack)
• Intelligent 1-knob equalizer and mono/stereo switch for headphones
• Future-proof due to innovative, updateable firmware system (USB service port)
• Fader & crossfader-start and curve adjust
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs

TECHNICAL DATA
• Inputs: 2 Phono, 7 Line, 1 Combo-Mic
• Outputs: 1 XLR, 1 Jack, 2 RCA, 2 headphones
• Frequency range: 20 Hz - 20 kHz
• EQ range classic: +12 dB / -8 dB
• EQ range isolator: +12 dB / -26 dB (Total Kill)
• Dimensions: 320 x 107.5 x 386.7 mm
• Weight: 6.8 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/2/232553_Reloop_IM.pdf

Carbon Fibre Tone Arm for the Stanton STX Portable Turntable.

Available with Black gimble.

Engineered to work with:

• 3K carbon fibre tube and aluminum head shell
• Billet aluminum gimbal with ball bearings
• Custom engineered limited bounce tension system
• Phono analogue pre-amp included
• Easy wire installation kit, including cartridge mounting screws
• Engineered to work flawlessly with: Ortofon VNL/OM, Reloop OM-GT and Shure M44-7

Please note: The JDDPTA-SX does not include a cartridge and stylus.

Why not get the tonearm with a Ortofon VNL Cartridge & Stylus?

Installation video can be found here:
https://www.youtube.com/watch?v=pQsXTqpkfjQ

Features:
• Suitable for 12" mixers (suitable for: Pioneer DJM-500, DJM-600, DJM-700, DJM-750, DJM-800, DJM-850, Allen&Heath Xone:43/62/92/PX5/DB2/DB4, Denon DNX1100, DN1600, DN1700, Numark M6)
• Protects against dust, dirt, liquids and impacts
• Custom-made, it fits your equipment like a second skin without having to unplug the cables
• Milky transparent surface
• High quality
• Made from polycarbonate
• Easy to use
• Dimensions (LxWxH): 36 x 32.5 x 3.5 cm
• Weight: 0.482kg

Since the introduction of the first portable DJ Fader, the Frisk Fader, STOKYO has been working on the next generation...here it is the, KUTTER.
Designed to work on portable turntables, iPads and other audio sources, the KUTTER now can work as a full on fader cutting on both sides.
With two inputs, one out, post and thru assignments for audio, reverse switch for the scratcher in you, this fader has everything.
Connect one turntable or even two for mixing!

Quality assurance from STOKYO

Features
portability (keeping’ it portable)
stereo fader (cut on both sides)
2

inputs and 1 output
reverse switch (hamster capability)
pre/post for stereo fader to use with 2 x sound sources and 1 Kutter (use with
2 TTs)
slim design (just a bit larger than Frisk Fader)
custom casing, (non generic case, scratch resistant sand blast finish)
clean design, screw-less top panel (screws on bottom) for scratchers
analog build (no batteries or charging necessary)
1
year limited warranty
Designed by STOKYO Japan
Assembled in Japan
Rohs and CE compliant
Packaging made from recycled material and recycable
Package includes 3 x 1/8" mini jack cables
\Manufactured and Distributed by STOKYO

Made in Japan

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

FEATURES

Inputs: two phono/line switchable (RCA), two line (RCA), mic (1/4")
Outputs: Master (RCA), Record (RCA), Headphone (1/4" stereo)
Three-band EQ and gain on each channel
EQ and gain on mic channel
Replaceable crossfader with reverse and slope-controls
Crossfader-style cueing

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Product Dimensions: 11.4" x 9.5" x 3.6"

Manual: http://www.numark.com/images/product_downloads/m2_quickstart_guide_v1_0.pdf