Mixer Accessories 140 Items

ETERNAL Crossfader is an inductive fade technology based on a magnetic control patented by Ecler. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field created between two sets of coils. This electromagnetic modulation controls an assigned Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless technology is combined with a custom high quality glides mechanism to offer a very smooth touch and succeed the most accurate Crossfader system.

The ETERNAL concept does have obvious advantages upon other existing Systems using optical technology. Unlike optoelectronic elements, the inductive concept is resistant to smoke, moisture, temperature and aging. Other electromagnetic systems found on the market are particularly sensible to the lateral room of the mechanism, and have heavier mobile elements (magnets or iron plates) that add an excessive weight to the crossfader. Such systems usually have a strange feel that can bother highly precise manipulations such as Scratching and Beat Juggling.

Field technology tested over 20.000.000 Operations, Eternal Crossfader is the revolutionary fader admired for turntablism djs and hip hop community. Suitable with NUO2.0, and the NUO3.0, NUO4.0 and HAK Series legacy products.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Carbon Fibre Tone Arm for the Stanton STX Portable Turntable.

Available with Black gimble.

Engineered to work with:

• 3K carbon fibre tube and aluminum head shell
• Billet aluminum gimbal with ball bearings
• Custom engineered limited bounce tension system
• Phono analogue pre-amp included
• Easy wire installation kit, including cartridge mounting screws
• Engineered to work flawlessly with: Ortofon VNL/OM, Reloop OM-GT and Shure M44-7

Please note: The JDDPTA-SX does not include a cartridge and stylus.

Why not get the tonearm with a Ortofon VNL Cartridge & Stylus?

Installation video can be found here:
https://www.youtube.com/watch?v=pQsXTqpkfjQ

REVOLUTIONARY NON-CONTACT TECHNOLOGY
The internationally lauded Innofader by Audio Innovate is now retro-fittable to all Reloop devices that are identified as „Innofader Compatible“.

MORE THAN 4 MILLION CYCLES: OPTIMIZED FOR THE HARDEST SCRATCHING APPLICATIONS
The RMX Innofader has been specially developed to give users an effortless, professional performance even under the most rigorous use in the toughest conditions. Audio Innovate‘s revolutionary non-contact technology has created a fader that is perfect for the needs of professional DJs. The RMX Innofaders are accurately calibrated and ready for immediate use in any compatible Reloop product; however, the performance can also be personalised with the added ability to fine-tune the Cut-in and Cut-out points.

EASY AND QUICK MOUNTING
The RMX Innofader represents the utmost quality throughout its design. The fader shaft is grounded to protect the integrity of the audio signal, and the design is tested to work for 4 million movement cycles – ensuring a long and reliable lifespan. The Reloop RMX Innofader is quick and easy to install on the professional RMX-22i/33i/60/80 and RMX-90 DVS mixers. Inside the box, a blue performance fader cap is included to complete the package.

FEATURES
• Revolutionary non-contact fader (mini Innofader by Audio Innovate)
• Designed to last more than 4 million cycles
• Quick mounting
• Cut-in and cut-out points can be calibrated
• Buttery smooth operating tension for perfect scratching
• Factory pre-calibrated for tight cut points
• 3-pin adapter cable for Reloop mixers included
• Fader shaft with brush grounding for even more reliable applications
• Compatible with Reloop RMX-22i/33i/44 BT/60/80/90 and all future Reloop products with INNOFADER compatible logo
• Incl. blue fader cap

TECHNICAL DATA
• Dimensions: 72 x 14.5 x 17 mm
• Weight: 26 g

Manual:
https://www.reloop.com/media/custom/upload/Reloop-Calibration_PDF_RMX_innofader_Web.pdf
https://www.reloop.com/media/catalog/product/pdf/2/3/4/234052_Reloop_IM.pdf

Omni Portable Turntable Tone Arm Tension Mod by Tiny Steppa

Enhance Durability. Unleash Potential.

"The tone arm tension design in the Omni is actually very simple, with the two rubber bands doing their job well. However, we're aware that rubber bands can become hard and lose elasticity over time, much like changing a platter belt after a long while. This modification gives you an option to enhance durability, and elevate Omni's potential."

Easy stylus weight adjustment: Fine-tune the stylus weight with your fingertips.
Tone arm protection: Nylon screws prevent tonearm coating damage during setup.
Simple installation: Quick and user-friendly assembly.
Tool kit included: All necessary tools are in the package.
Omni certified: Meets quality and compatibility standards.

Installation video can be found here:
https://www.youtube.com/watch?v=ctHskU8k67c

Watch the adjustment video here:
https://www.youtube.com/watch?v=TDKhq1hTC3s

UDG CD Player/Mixer dust cover made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your gears from dust and liquid drops.

UDG CD-Player/Mixer Dust Cover - features:

• fabric: water-resistant nylon 210D
• UDG logo printed in plastisol
• fits CD player/mixer
• protect various equipment
• outer dimensions: approx. 32 x 38 x 13 cm (12.6 x 15 x 5.1 inch)
• weight: approx. 0.09 kg (0.19 lbs)