Mixer Accessories 66 Items

ETERNAL Crossfader is an inductive fade technology based on a magnetic control patented by Ecler. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field created between two sets of coils. This electromagnetic modulation controls an assigned Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless technology is combined with a custom high quality glides mechanism to offer a very smooth touch and succeed the most accurate Crossfader system.

The ETERNAL concept does have obvious advantages upon other existing Systems using optical technology. Unlike optoelectronic elements, the inductive concept is resistant to smoke, moisture, temperature and aging. Other electromagnetic systems found on the market are particularly sensible to the lateral room of the mechanism, and have heavier mobile elements (magnets or iron plates) that add an excessive weight to the crossfader. Such systems usually have a strange feel that can bother highly precise manipulations such as Scratching and Beat Juggling.

Field technology tested over 20.000.000 Operations, Eternal Crossfader is the revolutionary fader admired for turntablism djs and hip hop community. Suitable with NUO2.0, and the NUO3.0, NUO4.0 and HAK Series legacy products.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Jesse Dean Contactless Scratch Fader for your Stanton STX portable turntable.

The all new high performance fader for ultra fast cuts.

Digitally controlled.

The fader features billet aluminum rail blocks for a robust construction.

Extremely easy cut-In adjustment without having to remove your fader.
Simply calibrate your fader from the top!

45mm glider travel with standard mounting hole pattern for preferred alignment.

Kit includes:

• JDDX2R-SX fader
• Black JDD fader plate
• Black fader cap
• Mini screwdriver for cut adjustment

JDDX2R-SX calibration instructions: https://www.youtube.com/watch?v=Gm3RpM8ughI&t=3s
Stock fader calibration instructions: https://www.youtube.com/watch?v=4o4nG07CUcA

REVOLUTIONARY NON-CONTACT TECHNOLOGY
The internationally lauded Innofader by Audio Innovate is now retro-fittable to all Reloop devices that are identified as „Innofader Compatible“.

MORE THAN 4 MILLION CYCLES: OPTIMIZED FOR THE HARDEST SCRATCHING APPLICATIONS
The RMX Innofader has been specially developed to give users an effortless, professional performance even under the most rigorous use in the toughest conditions. Audio Innovate‘s revolutionary non-contact technology has created a fader that is perfect for the needs of professional DJs. The RMX Innofaders are accurately calibrated and ready for immediate use in any compatible Reloop product; however, the performance can also be personalised with the added ability to fine-tune the Cut-in and Cut-out points.

EASY AND QUICK MOUNTING
The RMX Innofader represents the utmost quality throughout its design. The fader shaft is grounded to protect the integrity of the audio signal, and the design is tested to work for 4 million movement cycles – ensuring a long and reliable lifespan. The Reloop RMX Innofader is quick and easy to install on the professional RMX-22i/33i/60/80 and RMX-90 DVS mixers. Inside the box, a blue performance fader cap is included to complete the package.

FEATURES
• Revolutionary non-contact fader (mini Innofader by Audio Innovate)
• Designed to last more than 4 million cycles
• Quick mounting
• Cut-in and cut-out points can be calibrated
• Buttery smooth operating tension for perfect scratching
• Factory pre-calibrated for tight cut points
• 3-pin adapter cable for Reloop mixers included
• Fader shaft with brush grounding for even more reliable applications
• Compatible with Reloop RMX-22i/33i/44 BT/60/80/90 and all future Reloop products with INNOFADER compatible logo
• Incl. blue fader cap

TECHNICAL DATA
• Dimensions: 72 x 14.5 x 17 mm
• Weight: 26 g

Manual:
https://www.reloop.com/media/custom/upload/Reloop-Calibration_PDF_RMX_innofader_Web.pdf
https://www.reloop.com/media/catalog/product/pdf/2/3/4/234052_Reloop_IM.pdf

Contactless Fader by Jesse Dean for your Reloop SPIN turntable.

The JDDX2R-SP is the same design built of the legendary JDDX2RS-A - with extra capability!

No need to take out and calibrate each time - calibrate from the top!

It’s dual rail slide contactless element gives it durability for an aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors and circuitry. There is virtually no cleaning needed with this contactless element.

- Dual rail 45mm slider for stability and smooth action
- Magnetic sensor contactless circuitry
- Two side cut-in adjustment
- Switchable from double cut to 2 channel capability
- FR4 fiberglass PCB faceplates
- Full size fader cap by Cooler Caps!
- 30 second easy installation
- Comes with cut adjuster screw driver

JDDX2R-SP calibration instructions: http://www.zendell.uk/LINKS/JDDX2RS-A_calibration.pdf

JDDX2R-SP double cut instructions: http://www.zendell.uk/LINKS/JDDX2R-SP.pdf