HiFi Turntables 43 Items

New motor, developed exclusively for direct-drive turntables

The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.

Knife-edge, pivot-point tonearm bearings

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).

Precision anti-skating and stylus-pressure adjustment

As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.

Pre-installed Oyster cartridge by SUMIKO

The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.

Built-in PHONO EQ amplifier supporting MM cartridges

The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.

Die-cast aluminium platter

In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.

Insulating feet with excellent shock absorption

The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.

2-speed turntable for 33-⅓ and 45 rpm

The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Features at a glance:
• Direct-drive analog turntable
• Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
• Die-cast aluminium platter
• Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
• Multi-layer piano black or natural walnut veneer finish
• Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
• Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
• 2-speed drive offering 33-⅓ and 45 rpm
• Gold-plated oxidation-resistant output connectors
• Oyster MM cartridge by SUMIKO
• Shock-absorbing insulating feet
• GND terminal
• RoHS compliant
• Included Accessories
• Felt Mat
• EP Adapter
• Counter Weight
• Head-shell (SUMIKO Oyster installed)
• Platter
• Dust Cover
• Hinges × 2
• RCA Audio cable with GND terminal
• AC Adapter (GPE036W-24015)
• Owner's Manual (including Warranty Card)

TURNTABLE FEATURES
• Type: Manual
• Drive method: Direct-drive
• Speed: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1%
• Built-in preamp: Yes
• S/N ratio: 67dB
• Cartridge: SUMIKO Oyster
• Cartridge type: MM
• Cartridge output: 4.0mV (1kHz)
• Tracking force: 2.3g
• Cartridge weight: 5.3g
• Including headshell: 15.3g
• Rec. cartridge weight: 4-13g
• Rec. cartridge weight (incl. headshell): 14-23g

AUDIO OUTPUTS
• Output level & impedance phono (MM): 4.0mV (1kHz)
• RCA: 1
• Output level & impedance RCA: 224mV (–13dBV)

ENERGY MANAGEMENT
• Power consumption (standby): 0.5W
• Power consumption: 2W
• AC adapter power
- Input: AC 100 V – AC 240 V, 50/60 Hz
- Output: DC 24 V, 1500 mA

DIMENSIONS AND WEIGHT
• Product height: 11.7cm
• Product width: 42cm
• Product length: 35.6cm
• Product weight: 6.1kg
• Packsize height: 24cm
• Packsize width: 52.5cm
• Packsize length: 43.8cm

New motor, developed exclusively for direct-drive turntables

The TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.

Knife-edge, pivot-point tonearm bearings

In collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g).

Precision anti-skating and stylus-pressure adjustment

As you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.

Pre-installed Oyster cartridge by SUMIKO

The TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.

Built-in PHONO EQ amplifier supporting MM cartridges

The TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.

Die-cast aluminium platter

In conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.

Insulating feet with excellent shock absorption

The insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.

2-speed turntable for 33-⅓ and 45 rpm

The TN-4D-SE supports 33-⅓ and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Features at a glance:
• Direct-drive analog turntable
• Crystal-locked speed stability, thanks to a new brushless DC motor with feedback control
• Die-cast aluminium platter
• Knife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAEC
• Multi-layer piano black or natural walnut veneer finish
• Built-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)
• Audiophile-grade NJM8080 op-amp used in PHONO EQ stage
• 2-speed drive offering 33-⅓ and 45 rpm
• Gold-plated oxidation-resistant output connectors
• Oyster MM cartridge by SUMIKO
• Shock-absorbing insulating feet
• GND terminal
• RoHS compliant
• Included Accessories
• Felt Mat
• EP Adapter
• Counter Weight
• Head-shell (SUMIKO Oyster installed)
• Platter
• Dust Cover
• Hinges × 2
• RCA Audio cable with GND terminal
• AC Adapter (GPE036W-24015)
• Owner's Manual (including Warranty Card)

TURNTABLE FEATURES
• Type: Manual
• Drive method: Direct-drive
• Speed: 33 rpm, 45 rpm
• Wow & flutter: ≤ 0.1%
• Built-in preamp: Yes
• S/N ratio: 67dB
• Cartridge: SUMIKO Oyster
• Cartridge type: MM
• Cartridge output: 4.0mV (1kHz)
• Tracking force: 2.3g
• Cartridge weight: 5.3g
• Including headshell: 15.3g
• Rec. cartridge weight: 4-13g
• Rec. cartridge weight (incl. headshell): 14-23g

AUDIO OUTPUTS
• Output level & impedance phono (MM): 4.0mV (1kHz)
• RCA: 1
• Output level & impedance RCA: 224mV (–13dBV)

ENERGY MANAGEMENT
• Power consumption (standby): 0.5W
• Power consumption: 2W
• AC adapter power
- Input: AC 100 V – AC 240 V, 50/60 Hz
- Output: DC 24 V, 1500 mA

DIMENSIONS AND WEIGHT
• Product height: 11.7cm
• Product width: 42cm
• Product length: 35.6cm
• Product weight: 6.1kg
• Packsize height: 24cm
• Packsize width: 52.5cm
• Packsize length: 43.8cm

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features
•Belt-driven
•Built-in phono stage and Bluetooth for wireless use
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Satin White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed: 33,45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.7% 45: 0.6%
•Wow & Flutter: 33: 0.25% 45: 0.23%
•Platter Heavy: 8mm, blasted-glass platter with felt mat
•Main bearing: Stainless steel/brass
•Signal to noise: 65dB
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 5 - 10g (pre-mounted)
•Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
•Outputs: RCA Line, RCA Phono, Bluetooth
•Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
•Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
•Power consumption: 3 Watt max
•Dimensions: 415x100x335 mm (WxHxD)
•Weight: 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/T1_T1_Phono_SB_T1_BT_Manual.pdf

Manual Belt-Drive Turntable (Wireless & Analogue)

Audio-Technica’s AT-LPW50BT-RW wireless turntable provides optimal high-fidelity audio reproduction with the option of wired or Bluetooth® listening. The manual record player’s stunning rosewood-finished veneer adds to the turntable’s refined style, and also dampens low-frequency acoustic feedback to ensure you experience crystal clear, uninterrupted sound.

Incorporating a top-quality tonearm and the critically-acclaimed AT-VM95E, Audio-Technica’s AT-LPW50XBT-RW record player with Bluetooth® comes complete with everything a vinyl enthusiast needs to enjoy an immersive, rich analog audio experience.

The LPW50BT-RW takes Audio-Technica’s range of wooden turntables to the next level, incorporating a variety of enhanced features and wireless connectivity. This Bluetooth® vinyl player is the culmination of Audio-Technica’s 60 years of dedication to analog listening, creating a record player that produces unrivalled sound quality while featuring innovative audio technology.

Integrated Bluetooth® technology gives listeners the unique option to operate the AT-LPW50XBT-RW belt-drive turntable wirelessly. Whether you prefer wired listening to enjoy the distinct warmth of analog audio with no compromise on sound quality, or want to try out pairing your turntable with your brand new wireless headphones or speakers, you can do it all with this versatile record player.

Wired or Wireless Listening
Pair seamlessly to the latest wireless earbuds, headphones and speakers or use the included stereo RCA output cable for a traditional wired connection and optimal sound reproduction.

Plug-In and Play
AT-LPW50BTRW is equipped with a built-in selectable pre-amplifier for phono or line-level output, so you can choose whether to use the turntable’s built-in preamp and plug your vinyl player straight into a device with line-level input, or expand your setup with an external preamplifier.

Fully Manual Operation
Audio-Technica’s LPW50BTRW features manual, belt-drive operation with two speeds - 33-1/3 and 45 RPM - so you can make your way through your full vinyl collection. The sensor-monitored motor maintains accurate platter rotation speed and an adjustable dynamic anti-skate control minimizes distortion.

Refine Your Sound
The turntable includes a straight carbon-fibre tonearm with adjustable tracking force, hydraulically damped lift control and lockable rest, plus a matching matte-silver AT-HS4 universal ½"-mount headshell. The LPW50BTRW also includes one of Audio-Technica’s most versatile cartridges, the high-performance AT-VM95E. The dual moving magnet phono cartridge is compatible with any VM95 series replacement stylus, offering a wide choice of options for every budget and application.

Audio Aesthetics
The 30mm thick MDF plinth, with rosewood veneer dampens low-frequency acoustic feedback and minimises distortion while the professional anti-resonance, die-cast aluminium platter with rubber mat also works to ensure you enjoy superb audio clarity with minimal disturbance.

Features:
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4(silver) universal 1/2"-mount headshell and AT-VM95E (black) Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
• The AT-VM95Ecartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specifications:
Turntable
• Type Belt-drive manual turntable
• Motor DC servo with Active Speed Stabilization
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminum
• Wow and Flutter < 0.15 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.5 A Max
• Power Consumption 1.8 W
• Dimensions 420 mm (16.54") x 340 mm (13.39") x 126 mm (4.96") (W x D x H)
• Weight 5.5 kg (12 Ibs)
• Accessories Included: • Dust cover • Rubber mat • Platter (with drive belt) • Dust cover hinges • Counterweight • Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK) • 45-RPM adapter • RCA audio cable (Approx. 1.0m (3.3')) • AC adapter (Approx. 1.5m (4.9'))
• AC Adapter 12 V, 1.0 A
• Tonearm Type Static balanced straight carbon tonearm
• Effective Arm Length 223.6 mm
• Overhang 18.6 mm
• Tracking Error Angle Less than 2.0°
• Stylus Pressure Adjustment Range 0 to 3.0 g
• Applicable Cartridge Weight (including headshell) 11.5 to 16.5 g
• Replacement Stylus AT-VMN95EBK (sold separately)
• Replacement Headshell AT-HS4 SV (sold separately)
• Replacement Belt AT-LPW50BT exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 15 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec SBC

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

AT-LP5X
Fully Manual Direct Drive Turntable
Building on Audio-Technica’s analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.

The LP5x retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and ’70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.

Direct-drive, low noise motor
Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM
AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus
Lightweight AT-HS6 headshell
J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input
Anti-resonance, die-cast aluminum platter
Heavy rubber damping mat for improved low-frequency reproduction
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Elegant matte black finish
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable
Included dust cover and mounting hardware

Specifications

Drive Method Direct Drive
Type 3-speed, fully manual operation
Motor DC motor
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum
Starting Torque >1.0 kgf.cm
Braking System Electronic brake
Wow and Flutter <0.2% WRMS (33 RPM) at 3 KHz
Signal-to-Noise Ratio >50 dB
Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE 250 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized MC: 56dB nominal, RIAA equalized
USB Function A/D, - 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface - USB 2.0 compliant Windows 7 or above, MAC OS X or above
Power Supply Requirements 100-240V AC, 50/60 Hz
Power Consumption 3 W
Dimensions 450.0 mm (17.72") W x 352.0 mm (13.86")D x 157.0 mm (6.18")H
Weight 7.3 kg (16.1 lbs.)
Accessories Included AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus; AT-HS6 lightweight headshell; AC adapter ; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; dust cover with hinges.

Manual: https://eu.audio-technica.com/resources/AT-LP5X_UM_162501850_V1_EN_web_190927.pdf

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed: 33,45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.7% 45: 0.6%
•Wow & Flutter: 33: 0.25% 45: 0.23%
•Platter: Heavy 8mm, blasted-glass platter with felt mat
•Main bearing: Stainless steel/brass
•Signal to noise: 65dB
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 5 - 10g (pre-mounted)
•Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories: dustcover, feltmat
•Built-in Power Supply: 230V 50Hz (US: 110V 60Hz)
•Power consumption: 3 Watt max
•Dimensions: 415x100x335 mm (WxHxD)
•Weight: 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

2-speed Analog Turntable with Phono EQ and Bluetooth
A wireless turntable for new way of enjoying vinyl records

The TN-280BT is not only a great-sounding turntable for music enthusiastic who wants to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records

The TN-280BT also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.

The belt-drive motor on the TN-280BT reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.

For music enthusiasts who want to hear every sensuous note of their vinyl collection.

Main Features

2-speed Belt-drive turntable
Built-in Bluetooth transmitter
Built-in MM phono equalizer and Phono, Line, and Bluetooth outputs
High-performance MM cartridge included (Made in Japan)
Aluminum die-cast platter
Anti-skating mechanism
High-density MDF cabinet for better vibration and resonance

Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.2%
Signal-to-Noise Ratio more than 67 dB (A-weighted)
60 dB (unweighted, 20kHz, LPF)
Turntable (Platter)
Material Aluminum Die-cast
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Length 223 mm
Stylus Pressure Range 0 to 5 g
Compatible Cartridge 3.5 to 6.5 g
Anti-skating Adjustment Supported
Head-shell and Cartridge sections
Type MM-type
Stylus Shape Elliptical
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Output Impedance 47k ohms
Output Voltage 4.5 mV (+/-3dB)
Stylus Pressure 2.0 g (+/-0.5 g)
Cartridge Weight 5.7 g (+/- 0.5 g)
Head-shell Weight 10 g (including nuts, screws, and wires)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 4.5 mV (+/-3dB)
LINE 120 mV (-13dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

General
Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.5 Watts or less
Dimensions (W x H x D) 420 × 117× 356 mm / 16.5” x 4.6” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Felt Mat x 1
EP Adapter x 1
Counter Weight x 1
Head-shell x 1 (MM-type cartridge installed)
Turntable (Platter) x 1
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

2-speed Analog Turntable with Phono EQ and Bluetooth
A wireless turntable for new way of enjoying vinyl records

The TN-280BT is not only a great-sounding turntable for music enthusiastic who wants to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records

The TN-280BT also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.

The belt-drive motor on the TN-280BT reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.

For music enthusiasts who want to hear every sensuous note of their vinyl collection.

Main Features

2-speed Belt-drive turntable
Built-in Bluetooth transmitter
Built-in MM phono equalizer and Phono, Line, and Bluetooth outputs
High-performance MM cartridge included (Made in Japan)
Aluminum die-cast platter
Anti-skating mechanism
High-density MDF cabinet for better vibration and resonance

Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.2%
Signal-to-Noise Ratio more than 67 dB (A-weighted)
60 dB (unweighted, 20kHz, LPF)
Turntable (Platter)
Material Aluminum Die-cast
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Length 223 mm
Stylus Pressure Range 0 to 5 g
Compatible Cartridge 3.5 to 6.5 g
Anti-skating Adjustment Supported
Head-shell and Cartridge sections
Type MM-type
Stylus Shape Elliptical
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Output Impedance 47k ohms
Output Voltage 4.5 mV (+/-3dB)
Stylus Pressure 2.0 g (+/-0.5 g)
Cartridge Weight 5.7 g (+/- 0.5 g)
Head-shell Weight 10 g (including nuts, screws, and wires)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 4.5 mV (+/-3dB)
LINE 120 mV (-13dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

General
Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.5 Watts or less
Dimensions (W x H x D) 420 × 117× 356 mm / 16.5” x 4.6” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Felt Mat x 1
EP Adapter x 1
Counter Weight x 1
Head-shell x 1 (MM-type cartridge installed)
Turntable (Platter) x 1
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

Fully Manual Belt-Drive Turntable
•Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Motor with speed-sensor system to maintain accurate platter rotation speed
•Adjustable dynamic anti-skate control
•High-isolation, height-adjustable feet
•Professional anti-resonance, die-cast aluminum platter with rubber mat
•AT-HS4 ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
•Adjustable dynamic anti-skate control
•AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
•Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
•High-isolation, height-adjustable feet
•AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Drive Method: Belt-Drive
Type: 2-speed, fully manual operation
Motor: DC servo with Active Speed Stabilization
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Signal-to-Noise Ratio: > 60 dB
Output Level: Pre-amp: "PHONO": 4.0 mV nominal at 1 kHz, 5 cm/sec Pre-amp "LINE": 200 mV nominal at 1 kHz, 5 cm/sec
Power Supply Requirements: 100 to 240 V, 50/60 Hz
Power Consumption: 220 V 50 Hz
Working: 1.3 W
Motor off: 1.1 W
Power off: 0.1 W
Dimensions: With dust cover 126.0 x 420.0 x 340.0 (H x W x D mm) Without dustcover and hinges:114.0 x 420.0 x 340.0 (H x W x D mm)
Weight: 4.81 kg (without dustcover)
Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus in black
• Detachable RCA output cable (dual RCA male to dual RCA male)
• Platter
• AC adapter
• 45 RPM adapter
• Counterweight
• Turntable mat
• Removable hinged dust cover

Manual: https://www.audio-technica.com/cms/resource_library/literature/e89c31b269914a97/at_lpw50pb_um_162502020_v1_en_web_191220.pdf

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Smart Styling - Combining Audio and Aesthetics:
The LPW40WN was designed to give you optimal high-fidelity audio reproduction with smart styling.

Optimal High-fidelity Audio Reproduction - Stylish Wood Turntable:
A stunning addition to any system, the AT-LPW40WN features an anti-resonance plinth with simulated walnut wood veneer to limit low-frequency acoustic feedback.

Features:
• Plays 33-1/3 and 45 RPM Records with Speed Control
• Built-in Switchable Phono Pre-amplifier
• Straight Carbon-fiber Tonearm
• AT-VM95E Dual Magnet™ Phono Cartridge
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Fully manual operation
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
• AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
• Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
• Built-in switchable phono pre-amplifier for phono or line-level output
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Specifications:
• Type: 2-speed, fully manual operation
• Motor: DC servo motor w/speed stability control
• Drive Method: Belt-drive
• Speeds: 33-1/3 RPM, 45 RPM
• Wow and Flutter: < 0.15 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio: > 60 dB
• Output Level: Pre-amp: ""PHONO"": 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level: Pre-amp ""LINE"": 200 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
• Power Supply Requirements: 100 to 240 V, 50/60 Hz
• Dimensions: 117 x 420 x 340 (H x W x D mm)
• Weight: 5.0 kg

Accessories Included:
• AT-HS4BK Headshell,
• AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus
• Detachable RCA output cable (dual RCA male to dual RCA male)
• AC adapter
• 45 RPM adapter
• Counterweight
• Rubber mat

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

Analogue HiFi Turntable for Audio Purists

The TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.

Smooth belt drive & low-noise DC motor

The precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.

Static balanced, straight tone arm with optimal tracking performance

The TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.

Flexible Headshell Connection

The headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.

Classy, matt slimline housing with high-quality terminal

Alongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.

FEATURES
•Belt-driven Hi-Fi turntable
•Factory fitted with Ortofon OM10 cartridge
•New straight tonearm design with optimal tracking performance
•Manual arm lift
•Low vibration DC motor
•Integrated motor control with Speed-Switch for conveniently selecting
two different speeds 33 / 45 rpm
•External DC power supply
•Die-cast Aluminum Platter with chrome edging
•Anti-Skating Wheel-System
•Gold-plated, corrosion resistant connections (all cables detachable)
•Slim-line wooden Plinth with mat black finish
•Convenient power switch at the side bottom
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

TECHNICAL DATA

Turntable Section:
•Type: Belt-Driven Analogue Turntable System
•Drive: Belt drive
•Motor: DC Motor
•Turntable Speeds: 2 speeds (33 1/3, 45)
•Wow and flutter: 0.2% WRMS
•S/N Ratio: >65 dB (a-weight)

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 300 mm
•Weight: 550 g

Tonearm Section:
•Type: Static Balanced Straight Tonearm
•Effective Length: 224 mm
•Overhang: 19 mm
•Tracking Error Angle: 25°
•Tracking Force: 1.5 g
•Applicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)
•Anti-Skating Range: 0 – 3 g

Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:
•Power supply: DC 12 V, 500 mA
•Power Consumption: 6 W
•Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
Weight: Approx. 4.6 kg

Included Accessories:
Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price.
Created with an eye for interior design the (ready to go, straight out of the box) C62 record player and speakers have a veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the design complete. You can pump up the volume because of the two great quality speakers and NP5 diamond needle.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

Top quality made affordable
This is the best kid in class, the Crosley C62 is a unique straight-out-of-the-box turntable that's unmatched on the market. It comes with external speakers, aluminum platter, tone arm and adjustable counterweight, built-in Bluetooth receiver and a stylish Walnut finish. This turntable is the perfect way to step up your vinyl game without breaking the bank.
The C62 is designed by Crosley to give record collectors the opportunity to upgrade their record player system for an accessible price. Created with an eye for interior design this record player and speakers have a Walnut or Grey veneer finish and a matt black aluminium tonearm with counter weight. The three anti vibration control feed and sturdy steel platter make the upgrade complete.

• 2-speed turntable (Speed 331/3, 45 RPM)
• Plays 7”, 10” or 12” records
• 2 External Full-range speakers: 8Ω 10W x 2 4” speakers
• NP5 Diamond needle
• Adjustable Tonearm Counterweight
• Aluminium Tonearm
• Low-Vibration Synchronous Motor
• Switchable Preamp
• Built-in amplifier
• Bluetooth input
• Belt-driven
• Anti-skate adjustment
• Special turntable feet for effective vibration control
• Dust cover
• Dimensions: 41.9 cm (l), 35.8 (w), 13.3 (h)
• Weight: 5.5 kg
• EU & UK AC Power adapter, DC output 15 V 2.4A
• Power Consumption 70W
• Speed Variance +1.5%
• Wow and Flutter < 0.15%
• Signal to Noise 72 dB
• Downforce Range 3.0-6.0g
• Effective Tonearm Length 8.6” (218.5mm)
• Overhang 0.73

AT-LPW30TK
Manual Belt-Drive Wood Base Turntable

• Teak effect wood veneer finish
• Connect directly to speakers at home with the built-in phono preamplifier
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge

Video: https://www.youtube.com/watch?v=gmWsctJ8Kzk

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W

PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

This neat record player with a wooden look will easily blend into any kind of interior. The Crosley Gig will be the centre piece in the room, but it’s still modest enough to leave space for the rest.
Round out your mid-century modern decor with functional art from Crosley. Inspired by furniture from the 50s and early 60s, the Gig’s minimalistic design features sleek rounded edges and a faux wood finish with a matte black front face for contrast. Three knobs on the front allow you to easily crank up the volume, adjust pitch, switch between vinyl, aux-in or the built-in Bluetooth receiver, letting you play digital music through the record player. Use the matching speakers or the RCA outputs on the back to easily integrate into your existing music system. The Gig is a complete two-speed turntable system that’s ready to jam right out of the box.

• 2-speed record player (33 1/3 & 45 RPM)
• Plays 7”, 10” or 12” records
• 2 external full-range stereo speakers - 3”, 8Ω, 5W
• Built-in Bluetooth Receiver
• Pre-Mounted Moving Magnet Cartridge
• NP5 diamond needle
• Belt-driven
• Adjustable Pitch Control
• Bluetooth input
• Aux in
• RCA out
• AC power adapter (EU & UK PLUG)
• Dimensions: 43 cm (l), 28 cm (w), 10 cm (h) | Speakers: 18 cm (l), 10 cm (w), 10 cm (l)
• Weight: 5.8 kg

PROS
•Modern turntable
•Bluetooth
•33 or 45 RPM

PRODUCT INFORMATION
•The Lenco LBT-188 is a turntable with Bluetooth functionality. Connecting this turntable to your Bluetooth speaker is child’s play. The ideal set-up for enjoying a full and warm sound while lounging on your couch at home. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your vinyl record at the right speed.

•The LBT-188 from Lenco features a metal turntable, belt drive, an RCA connection and a tone arm with a counterweight. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it against knocks. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003117
•Product height: 12.40 cm
•Product depth: 34.40 cm
•Product width: 41.70 cm
•Number of RCA outputs: 2
•12V car: Yes
•Power option: Power on/off switch
•USB connectors: USB A
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902041139
•Amplifier options: Includes (pre) amplifier
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 5 W

PROS
•Modern turntable
•Bluetooth
•33 or 45 RPM

PRODUCT INFORMATION
•The Lenco LBT-188 is a turntable with Bluetooth functionality. Connecting this turntable to your Bluetooth speaker is child’s play. The ideal set-up for enjoying a full and warm sound while lounging on your couch at home. Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your vinyl record at the right speed.

•The LBT-188 from Lenco features a metal turntable, belt drive, an RCA connection and a tone arm with a counterweight. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it against knocks. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003117
•Product height: 12.40 cm
•Product depth: 34.40 cm
•Product width: 41.70 cm
•Number of RCA outputs: 2
•12V car: Yes
•Power option: Power on/off switch
•USB connectors: USB A
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902041139
•Amplifier options: Includes (pre) amplifier
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 5 W

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes

PROS
•Modern turntable
•Built-in speakers
•Adjustable speed
•Output for headphones

PRODUCT INFORMATION
•The Lenco LS-10 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-10 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you connect external speakers via the RCA jack on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also has an output for headphones so that you can listen to your favourite music without disturbing anybody else.

•The Lenco LS-10 is supplied with a removable dust cover that protects the turntable from dirt. You can also easily clean the appliance with a soft, dry cloth. The stylus is easy to replace. The manual supplied with the turntable tells you how. The Lenco LS-10 guarantees you years of pleasure listening to music from the past, played on modern equipment.

SPECIFICATIONS
•SKU: A003102
•Product height: 10.30 cm
•Product depth: 31.80 cm
•Product width: 32.90 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040965
•Material: Plastic
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 0.5W
•Maximum power consumption: 6W
•Headphone connector: Yes