HiFi Turntables 21 Items

Fully Automatic Wireless Belt-Drive Turntable

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.

At the heart of the AT-LP70XBT is a top-notch phono cartridge for unmatched, high-fidelity audio. Built with Audio-Technica’s industry-leading phono cartridge expertise, the AT-VM95C is a versatile, superior-performance cartridge that other turntables in this class simply can’t match. Integrated into the J-shaped tonearm, the AT-VM95C cartridge with a 0.6 mil conical stylus offers excellent channel separation and low distortion for outstanding tonal quality. To further personalise vinyl listening, the stylus can also be easily upgraded with any other styli (elliptical, micro linear, or Shibata) in our VM95 Series, offering unprecedented customisation for a turntable in this category.

To ensure peak sound performance, the AT-LP70XBT includes a three-piece, anti-resonance chassis that provides a solid foundation to dampen unwanted noise for improved sound quality. The included AC adapter further reduces noise as the AC/DC conversion is moved to the outside of the chassis to limit any unfavorable noise.

Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33⅓ and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.

Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Replaceable / Upgradable AT-VM95 Series Styli
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any AT-VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
• A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Stylish three-piece chassis construction dampens resonance for improved sound quality*
• J-shaped tonearm is engineered to minimize tracking errors
• Tonearm lock reduces risk of stylus damage
• Built-in switchable phono/line pre-amplifier
• Anti-resonance, die-cast aluminium platter with felt mat
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.

Specifications:
Turntable
• Motor DC motor
• Drive Method Belt-drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.25% (WTD)
• Signal-to-Noise Ratio > 55 dB
• Cartridge Type This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Consumption 1.6 W
• Dimensions 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H)
• Weight Approx. 2.9 kg (6.4 lbs)
• AC Adapter *Type: FJ-SW1261200500DN / Rated Input Voltage: 100 to 240 V AC / Rated Input Current: 0.4 A max. / Rated Frequency: 50 Hz / 60 Hz / Rated Output Voltage: 12 V DC / Rated Secondary Current: 0.5 A / Cable Length: Approx. 1.5m (4.9')
• Effective Arm Length 220 mm (8.7")
• Overhang 18 mm (0.71")
• Tracking Error Angle Less than 2.0°
• Replacement Stylus AT-VMN95C (sold separately)
• Replacement Belt AT-LP70X exclusive belt (sold separately)
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2.5 mW EIRP
• Maximum Communication Range Line of sight - approx. 10 m (33')
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC

Accessories Included
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• 45 RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Notes *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

Premium Class Direct Drive Turntable System SL-1500C

The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge
Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

Simple Design with Functional Beauty
The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.

Specs:
• The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation
• Complete Turntable with a Built-in Phono Equalizer and Cartridge
• Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably
• Simple Design with Functional Beauty

Technical Data:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 and 78 r/min
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 % W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 2.0 kg (Including rubber sheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32'　(at the outer groove of 30 cm (12") record)
- Within 0° 32'　(at the inner groove of 30 cm (12") record)
• Applicable Cartridge Weight Range:
(without auxiliary weight):
- 5.6 - 12.0 g
- 14.3 - 20.7 g (including head shell)
(with auxiliary weight):
- 10.0 - 16.4 g
- 18.7 - 25.1 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1
- LINE (Pin Jack) x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2W (Standby)
• Dimensions (W x H x D): 453 x 169 x 372 mm
• Weight: Approx. 9.9 kg
• Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Cartridge(ortofon 2M Red), PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

They say clothes make the [wo]man, but in this case, they also make the stereo. Outfitted in eye-catching heather grey fabric accented with walnut wood and silver accents, the Aria Shelf System is definitely dressed for success. The Aria is more than just a pretty face, though: the three-speed turntable boasts a built-in Bluetooth receiver, FM radio, and aux input, and the speakers deliver 2x25 watts of sound. Stunning looks and personality to match? We’re absolutely swiping right on the Aria Shelf System.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Built-in speakers | 1” 6Ω 5W x 2 + 4" 6Ω 20W x 2
• NP16 needle
• Belt-driven
• FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter output 15V 3A
• Turntable dimensions: 34,3 cm (w), 11,4 (h), 31 cm (d)
• Speaker dimensions: 16.5 cm (w), 24.7 cm (h), 18.4 cm (d)
• Weight: 7,09 kg

After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raises the bar even higher.

A MILESTONE FOR THE NEXT DECADES
The Debut PRO brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.
The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality.

The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function.

DEEPLY DRIVEN
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.

A NEW PLATTER – A DEEPPER DISH
The new Debut PRO platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO has to offer!
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO.

HYBRID TONEARM
The new Debut PRO features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges!

AZIMUTH & VTA ADJUSTMENT
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

Features:
Pick it PRO
Lively and robust sound
The perfect combination of components is the key to achieve the great sound of the Pick it PRO.

Nickel Coating
Sustainable components
The nickel finish of the aluminium components results in a hard, resistant surface.

Hybrid Tonearm
Carbon Aluminium Sandwich
This super stiff and uniquely dampened tonearm ensures perfect tracking of the record groove.

VTA & Azimuth
Fully adjustable
The Debut PRO comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.

33/45/78 RPM
High precision motor control
The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.

Bearing block
Complete new design
The precision CNC milled and nickel coated tonearm bearing parts are completely new and designed just for the PRO.

Special Platter
TPE damped & anti magnetic
The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.

Metal Feet
Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Technical Specifications:
• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt drive with electronic speed control
• Platter: 300mm, die cast aluminium platter with TPE damping and felt mat
• Platter bearing: high precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
• Speed drift: 33: +/-0,40%; 45: +/-0,50%
• Signal to noise: 68dB
• Tonearm: 8,6” one-piece carbon-aluminium tonearm
• Effective arm length/mass: 218,5 mm / 10,0 g
• Overhang: 18,5mm
• Included accessories: 15V DC / 0,8A power supply, dust cover, 78 RPM round belt, 7‘‘ single adapter
• Power consumption: 4W / 0W standby
• Dimensions: 415 x 113 x 320mm (WxHxD)
• Weight: 6 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2021/07/PJ-Phono-DebutPro-Manual.pdf

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Uncompromised heavyweight design combined with high-end features. The big brother of our X1 sets new standards.

Real high-end features.

Azimuth & VTA - Fully adjustable
The X2 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X2 as you want it.

Pick it 2M Silver - High-end cartridge
This cartridge uses internal silver plated copper coils, which guarantees outstanding sonic results! The X2 is available with or without the Pick it 2M Silver.

2 kg Platter - Resonance free acryl
The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character.

33/45/78 RPM - High precision motor control
A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button.

New motor suspension
A good motor by itself, is already very quiet. To get the best performance out of it, we have improved the motor suspension. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt - this way the motor chassis is effectively decoupled from the main plinth for optimal performance.

The Tonearm - 9'' Carbon-Aluminium Tonearm
Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight.
Compared with its little brother the X1, the tonearm is longer - 9“ in length - and the tube has a wider diameter. The carbon/aluminium sandwhich construction results in better internal damping. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges.

Metal Feet - Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Phono Cable - Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Technical Specifications:
•Speed: 33, 45, 78 (electronic speed change)
•Principle: belt drive
•Speed variance: 33: 0.25% 45: 0.20%
•Wow & flutter: 33: 0.12% 45: 0.10%
•Signal to noise: 70 dB
•Platter: 30mm thick, 2 kg heavy acryl
•Main bearing: stainless steel/brass
•Tonearm: 9” carbon/aluminium sandwich
•Effective arm length: 230 mm
•Overhang: 18 mm
•Effective tonearm mass: 13,5g
•Tracking force range: 0 - 30mN
•Included accessories: 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
•Power consumption: 4,5 watts max / 0.3 watt standby
•Dimensions: 460 x 150 x 340 mm (WxHxD)
•Weight: 10 kg

Manual: https://www.project-audio.com/wp-content/uploads/2021/01/X2-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Belt Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Belt Drive – With simple electronic push button speed control.
• Pre-installed Moving Magnet Cartridge – A well-regarded choice, play records in minutes.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
There’s nothing quite like vinyl: the tactile pleasure of removing a record from its sleeve and carefully placing it on a deck is unique. We designed the original Alva TT to honour that tradition, and Alva ST to share that pleasure with more people.
With a pre-fitted cartridge –so you’ll be playing records in minutes – the belt-drive Alva ST also features switchable Hi-Res Bluetooth streaming and integrated phono stage.
Everyone should be able to enjoy the freedom Alva brings.

King of Convenience
Alva ST is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. Alva ST keeps it simple with perfectly matched cartridge pre-installed. Alva ST connects to pretty much any audio system too, as it has a switchable integrated phono-stage. It even works wirelessly with Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva ST has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect Alva ST to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MM Cartridge Pre-installed
After hours of listening, we selected an Audio Technica Moving Magnet cartridge to be ready fitted on Alva ST. With no fiddly set-up you’ll be playing records in minutes. The elliptical stylus provides a greater contact area with your records’ grooves, producing accurate tracking of information and, of course, great sounding music.

Belt Drive
Alva ST uses the proven belt-drive method, supplemented with electronic motor speed control. After connecting the belt for the first time, you won’t need to look under the platter again. Rotation speed selection is made by 2 neat electronic buttons on the ST’s aluminium top surface – so you can effortlessly switch between playing albums and singles.

Aluminium, Tuned
Alva ST’s platter is aluminium die-cast, finished by CNC to ensure a totally level and smooth surface. The 17mm high aluminium platter is finished with a 5mm rubber mat – a combination proven to reduce unwanted resonance.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva ST to do just that, with a 1mm aluminium top plate, and a layer of EVA to absorb vibration sitting on top of MDF. It’s cradled in a composite chassis and weighs 9kg. Reassuring solid, and with great sound absorption qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva ST shares our minimalist house style. It’s the perfect match for our best-selling Evo and CX Series hi-fi separates. Designed and engineered in London with the emphasis on classic timeless style.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Belt Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.12%
• TURNTABLE PLATTER: Die Cast Aluminium
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 645.3g (930.5g inc. rubber mat)
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 6W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.3W
• DIMENSIONS (W X H X D): 435 x 139 x 366.7mm
• WEIGHT: 9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: Moving Magnet
• CARTRIDGE FREQUENCY RESPONSE: +/- 0.5dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Alloy Tube
• CARTRIDGE OUTPUT LEVEL: 1.8~3.6mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-st

Direct Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Direct Drive – Consistent drive speed with pitch-perfect audio reproduction.
• Pre-installed High-Output MC Cartridge – Pristine musical detail, custom design. Easy setup.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
You’ve spent years curating the perfect record collection, searching for hidden gems in record shops and online – because you love music. Our shared love means that we didn’t stop with Alva TT.
We pushed on to create Alva TT V2; with a direct drive system, bespoke MC cartridge, an all-new tone-arm, and Hi-Res Bluetooth with an integrated phono stage – both now switchable.
We believe that your records deserve to sound as fantastic as they look.

King of Convenience
Alva TT V2 is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. TT V2 comes with a bespoke designed cartridge pre-installed. It connects to pretty much any audio system too, thanks to a switchable integrated phono-stage. It even works wirelessly with high quality Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva TT V2 has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect TT V2 to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MC Cartridge Pre-installed
Alva TT V2’s bespoke cartridge is ready fitted – so there’s no tricky set-up, and its sound is perfectly matched to the other components in the turntable. We designed the high-output Moving Coil (MC) cartridge with an exposed cantilever. It reduces unwanted resonance and vibration, delivers high levels of gain and outstanding musical detail during playback.

Direct Drive
Alva TT V2 has a medium-torque Direct Drive motor, like its predecessor the TT. The 8 pole, 3 phase, brushless DC motor is quartz controlled to ensure accurate turntable speed. With precision control, and silent running, Alva TT V2 achieves just 0.06% wow and flutter. This means excellent pitch stability – particularly during longer, more sustained, musical notes.

Reassuringly Solid Platter
Complimenting the direct drive motor, Alva TT V2’s platter has the feel of finely polished stone. It’s made from Polyoxymethylene, a semi-crystalline thermoplastic used in precision engineering applications, where high stiffness and dimensional stability are demanded. The weight of the platter, coupled with our medium torque direct drive motor, ensures excellent speed stability during playback of records.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva TT V2 to endure, starting with a top plate hewn from 6mm aluminium plate, and layer of EVA to absorb vibration sitting on MDF. It’s cradled in a composite chassis and weighs an impressive 10.9kg. Reassuring solid construction, with great acoustic qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva TT V2 celebrates our timeless house-style. It’s the perfect match for our best-selling CX Series hi-fi separates and shares the laser-etched brand logo with our premium Edge Series.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Direct Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.1%
• TURNTABLE PLATTER: POM (Polyoxymethylene)
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 2.2kg
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 5.5W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.25W
• DIMENSIONS (W X H X D): 435 x 139 x 368mm
• WEIGHT: 10.9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: High Output Moving Coil
• CARTRIDGE FREQUENCY RESPONSE: *+/- 1dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Aluminium
• CARTRIDGE OUTPUT LEVEL: 2mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-tt-v2

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

Audiophile Plug & Play turntable - Made in Europe!

Built-in phono stage and switchable phono/line output

With a smart tonearm design we were able to combine pure sound quality with an easy setup. Our Plug & Play design with pre-adjusted tracking force and anti-skating for the included Ortofon OM cartridge has saved us costs and is extremely efficient in handling for our customers.

No compromise in sound: On contraire, the lightweight and low friction aluminium tonearm is optimized for the Ortofon cartridge and will bring out its maximum potential. Also the vibration absorbing feet isolate the turntable from the surface it is place on to deliver the best sound possible. The Primary E Phono is equipped with a switchable phono/line output, so it can be run with a dedicated external phono preamp or with the integrated phono preamp connected to a line input (for example AUX, CD, Tuner, Tape, etc.). With intelligent construction and without needless features we were able to keep the price attractive, despite this product being handmade in Europe. This way we‘re able to offer our customers the sound quality they deserve!

In the box:

Primary E Phono with Ortofon OM cartridge
Gold-plated RCA Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Built-in phono stage
Switchable phono and line output
Belt-drive with synchronous motor
Ortofon quality OM cartridge
Vibration absorbing feet
Machined special composit fibre chassis
Light-weight, high-precision aluminium tonearm
Sapphire tonearm bearing
Gold-plated contacts
Stainless steel bronze bushing
Elegant dust cover with adjustable hinges
Silicon belt with optimum damping
Handmade in Europe

Technical Specifications
Outputs RCA Phono/Line
Speed 33, 45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.8% 45: 0.7%
Wow & Flutter 33: 0.29% 45: 0.27%
Platter 300 mm with felt mat
Main bearing Stainless steel
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 3 - 7 g (supplied)
Tracking force range 0 - 25mN (18mN pre-adjusted)
Included accessories Dust cover
Power consumption 4.5 Watts max
Dimensions 420 x 112 x 330mm (WxHxD)
Weight 4.0 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2018/09/PJ-Phono-Primary-E-Phono_Userguide-140818.pdf

This record player with external speakers and its minimalistic design has a satisfying listening experience due to the aluminium platter, NP15 diamond needle and tone arm with adjustable counterweight. In combination with the Bluetooth function the T150 record player has everything you need.

• 2-speed record player
• Plays 7”, 10” or 12” records
• 2 external speakers - 4”, 4Ω, 15W
• NP15 diamond needle
• Belt-driven
• Pitch Control
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC power adapter
• Aluminium tonearm with adjustable counterweight
• Full-size aluminium platter
• Dimensions: 40.5 cm (l), 31.5 cm (w), 5.5 cm (h)
• Speakers: 13 cm (l) 15 cm (w) 20 cm (h)
• Weight: 3.3 kg

3-speed Analog Turntable with Phono EQ and Bluetooth
The simplest way of enjoying vinyl records

The TN-180BT brings you a totally new way of listening to vinyl records with its Bluetooth capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT delivers the true sound of vinyl records.

Main Features

3-speed Belt-drive turntable supporting 33/45/78 rpm
Built-in Bluetooth transmitter to BT speakers or headphones
Built-in Phono equalizing amplifier and Phono and Line outputs
High-density MDF cabinet for improved resonance reduction
Sleek design in black, white or cherry finish
Auto-return and manual arm lifter

 Specifications
TURNTABLE section
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-1/3, 45, 78 rpm
Deviation of Speed +/-2%
Wow-and-Flutters 0.25%
Signal-to-Noise Ratio more than 64 dB (A-weighted, 20kHz, LPF)
Turntable (Platter)
Material Plastic
Diameter 30 cm
Tone-arm section
Type Straight, Static-balanced
Effective Arm Length 200mm
Head-shell and Cartridge sections
Type MM-type
Output Voltage 2.4mV (+/-3dB)
Analog Output section
Connectors RCA Pin Jack x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4 mV (+/-3dB)
LINE 149 mV (-16.5dBV)
Bluetooth section
Range Approx. 10m
Supported Codec SBC

Operation Power AC Adapter
Input AC 100-240V, 50/60Hz
Output DC 12V 500mA
Power Consumption 1.5 Watts or less
Standby Power 0.2 Watts or less
Dimensions (W x H x D) 420 × 105× 356 mm / 16.5” x 4.1” x 14.0”
Weight (Net) 4.9 kg / 10.8 lbs.
Operating Temperature +5˚C to +35˚C
Included Accessories
Rubber Mat x 1
EP Adapter x 1
MM-type Cartridge x 1 (Installed)
Dust Cover x 1
Dust Cover Hinges x 2
RCA Audio Cable x 1
AC Adapter (GPE053A-V120050-Z) x 1
Owner’s Manual (including Warranty Card)

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs