HHV Records 1867 Items

Happy Face (Distressed) Logo Cap

Available Sizes: M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ska For Life Tee is equipped with the following features:
• rib crew neck with interior tape
• Ska For Life artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Nirvana

14,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Nirvana Happy Face (Distressed) Logo Cap is an adjustable hat that's on par with all the big players' stuff - a high-quality design single-handedly produced by the Nirvana merch department.

Nirvana Happy Face (Distressed) Logo Cap - Features:

• high rise 6-panel construction
• Nirvana 3D logo embroidery on front
• tonal eyelet stitching
• curved visor
• 7 eye snapback plastic closure at the rear
• interior includes plain tapes and a moisture-absorbing sweatband
• 100% cotton twill

Go to Item

Vinyl Junkie

Vinyl Addict T-Shirt

21,99 €*

Northern Soul Labels T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl Junkie Vinyl Addict Tee is equipped with the following features:
• rib crew neck with interior tape
• Vinyl Addict artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Northern Soul

19,79 €* 21,99 € -10%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Northern Soul Northern Soul Labels Tee is equipped with the following features:
• rib crew neck with interior tape
• Northern Soul Labels artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Underground Resistance

Workers T-Shirt

32,99 €*

Available Sizes: XS, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Underground Resistance Workers Tee is equipped with the following features:
• rib crew neck with interior tape
• Underground Resistance branding printed on left chest
• Underground Resistance Workers artwork printed on the rear
• regular fit
• 100% cotton single jersey, 203 g/m² (Gildan Ultra Cotton™)

Go to Item

Creator Pioneer Opus-Quad Hardcase

159,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your Pioneer OPUS-QUAD? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer OPUS-QUAD, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle
• Easy grip zipper pulls

Fits:
• Pioneer OPUS-QUAD Controller + power adapter, extra cables

Specifications:
• Weight: 3,30 kg / 7.26 lbs
• Outer Dimensions (W x H x D): 98.1 x 53.5 x 15.8 cm | 38.6 x 21.1 x 6.2 inch
• Inner Dimensions (W x H x D): 97.1 x 52.5 x 14.8 cm | 38.2 x 20.7 x 5.8 inch
• Material: Durashock molded EVA foam

Go to Item

Ultimate Audio Cable Set RCA Straight-RCA Angled Green 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA Straight-RCA Angled Black 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack Green Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack Black Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA Green Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack Green Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack Black Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA Green Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA Black Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Flight Case Rane Four Plus (Wheels)

359,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/ hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Wheels) also features roller wheels with high quality in-line skate bearings for convenient transport and heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• Rane Four Controller

Specifications:
• Weight: 14,50 kg / 31.9 lbs
• Outer Dimensions (W x H x D): 85.4 x 53.1 x 21.3 cm | 33.6 x 20.9 x 8.4 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 8.4 cm | 30.8 x 15.4 x 3.3 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Creator Reloop Flux Hardcase

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ/ Producer looking for a professional, durable case solution for your Reloop Flux? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Reloop Flux, this case is perfect for the travelling DJ/ Producer that needs to protect their equipment.

Weight 0,20 kg / 0.44 lbs
Outer Dimensions (W x H x D) 21.0 x 18.5 x 6.2 cm | 8.3 x 7.3 x 2.4 inch
Inner Dimensions (W x H x D) 16.0 x 13.0 x 5.2 cm | 6.3 x 5.1 x 2.0 inch
Material Durashock molded EVA foam
Protection Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam
Extra's Easy grip zipper pulls
Fits Reloop Flux

Go to Item

Creator Pioneer DJM-A9 Hardcase

129,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital Producer looking for a professional, durable case solution for your Pioneer DJM-A9? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DJM-A9, this case is perfect for the travelling Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Convenient carry handles
• Convenient shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer DJM-A9

Specifications:
• Weight: 1,54 kg / 3.388 lbs
• Outer Dimensions (W x H x D): 45.2 x 48.3 x 14.0 cm | 17.8 x 19.0 x 5.5 inch
• Inner Dimensions (W x H x D): 41.2 x 46.3 x 13.0 cm | 16.2 x 18.2 x 5.1 inch
• Material: Durashock molded EVA foam

Go to Item

Creator Pioneer DDJ-FLX4 Hardcase

79,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-FLX4, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Pioneer DDJ-FLX4 Controller

Specifications:
• Weight: 1,78 kg / 3.916 lbs
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 48.8 x 27.9 x 8.5 cm | 19.2 x 10.9 x 3.4 inch
• Material: Durashock molded EVA foam

Go to Item

Creator Denon DJ SC Live 4 Hardcase

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 4? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Denon DJ SC LIVE 4, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Denon DJ SC LIVE 4

Specifications:
• Weight: 3,50 kg / 7.7 lbs
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.1 cm | 30.4 x 18.4 x 5.2 inch
• Inner Dimensions (W x H x D): 72.8 x 41.3 x 12.1 cm | 28.6 x 16.3 x 4.7 inch
• Material: Durashock molded EVA foam

Go to Item

Ultimate 7" Record Case (200)

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

Go to Item

Ultimate Flight Case Pioneer DJM-A9

269,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DJM-A9 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DJM-A9 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Removable cable & PSU storage cover panel

Fits:
• 1x Pioneer DJM-A9

Specifications:
• Weight: 7,90 kg / 17.38 lbs
• Outer Dimensions (W x H x D): 56.1 x 45.9 x 21.6 cm | 22.1 x 18.1 x 8.5 inch
• Inner Dimensions (W x H x D): 42.3 x 40.9 x 15.6 cm | 16.6 x 16.1 x 6.1 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Ultimate Flight Case Rane Four Plus (Laptop Shelf + Wheels)

379,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide silver solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Roller wheels with high quality in-line skate bearings for convenient transport

Fits:
• 1 x Rane Four + 1 x Laptop + Accessories

Specifications:
• Weight: 16,00 kg / 35.2 lbs
• Outer Dimensions (W x H x D): 89.0 x 53.1 x 23.3 cm | 35.0 x 20.9 x 9.2 inch
• Inner Dimensions (W x H x D): 78.4 x 39.3 x 9.0 cm | 30.8 x 15.4 x 3.5 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Creator Rane Four Hardcase

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your Rane Four? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Rane Four, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Rane Four Controller

Specifications:
• Weight: 3,30 kg / 7.26 lbs
• Outer Dimensions (W x H x D): 83.8 x 45.9 x 12.4 cm | 32.9 x 18.1 x 4.9 inch
• Inner Dimensions (W x H x D): 78.8 x 41.0 x 10.7 cm | 31.0 x 16.1 x 4.2 inch
• Material: Durashock molded EVA foam

Go to Item

Nas

Nas York City T-Shirt

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Nas York City Tee is equipped with the following features:
• rib crew neck with interior tape
• Nas York City artwork printed on front
• Nas Stillmatic 20th Anniversary graphic printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Madlib

Headlib T-Shirt

34,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Madlib Headlib Tee is equipped with the following features:
• rib crew neck with interior tape
• Headlib artwork printed on front
• regular fit
• 100% cotton tubular jersey, 6 oz
• preshrunk to minimize shrinkage

Go to Item

Koss

Y88 - Splitter

6,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

TK MS You Can't Bring Me Down Tank Top

Suicidal Tendencies

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Suicidal Tendencies TK MS You Can't Bring Me Down Tank Top - Features:
• rib details at neckline and arm openings
• You Can't Bring Me Down artwork printed on chest & on the rear
• regular fit
• 100% cotton single jersey

Go to Item

The Cure

Boys Don't Cry T-Shirt

22,49 €* 24,99 € -10%

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Cure Boys Don't Cry Tee is equipped with the following features:
• rib crew neck with interior tape
• Boys Don't Cry artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Automat A2 (Ortofon 2M Red)

1.199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Rage Against The Machine

Evil Empire T-Shirt

24,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Rage Against The Machine Evil Empire Tee is equipped with the following features:
• rib crew neck with interior tape
• Evil Empire artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

New Order

Blue Monday T-Shirt

22,49 €* 24,99 € -10%

Love Will Tear Us Apart T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The New Order Blue Monday Tee is equipped with the following features:
• rib crew neck with interior tape
• Blue Monday artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Joy Division

24,99 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Joy Division Love Will Tear Us Apart Tee is equipped with the following features:
• rib crew neck with interior tape
• Love Will Tear Us Apart artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

AIAIAI

S01 MKII Speaker Unit

59,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AIAIAI

TMA-2 DJ XE

139,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Modular DJ headphones.

Features:
• Balanced sound
• High isolation PU leather earpads
• Clear sound at high volume levels
• High sound isolation on-ear cushions
• Weighing only 168g
• Modular headphone design

Go to Item

IsoAcoustics

zaZen I

239,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Yukio Decks T-Shirt

20,99 €* 29,99 € -30%

Available Sizes: S, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Yukio Decks Tee is equipped with the following features:
• rib crew neck with interior tape
• Acrylick Yukio Decks artwork printed on chest
• regular fit
• 100% cotton single jersey, 6 oz

Go to Item

Gone Diggin' T-Shirt

Available Sizes: S, M, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Acrylick Gone Diggin' T-Shirt - Features:
• rib crew neck with interior tape
• Acrylick branding printed on left chest
• Gone Diggin' artwork printed on the rear
• regular fit
• 100% cotton single jersey, 6 oz

Go to Item

Raised By Hip Hop Hoodie

59,99 €*

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Raised By Hip-Hop Hoodie's features include:
• drawstring-adjustable hood with, jersey lining metal eyelets and interior tape
• Raised By Hip-Hop artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Gone Diggin' T-Shirt

Only One Night Coloured Vinyl

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

The Hurricanes

12" | 1988 | EU | Reissue (ZYX Music)

16,99 €*

Release: 1988 / EU – Reissue

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pop Trading Company

Corn Skateboard

69,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Pop Trading Company Corn Skateboard is an 8.375 inch wide deck made in china by Dwindle from 7-ply Canadian maple, equipped with a seasonal POP graphic. Attention: The stain color may vary!

Go to Item

Dubreq

Stylophone S-1 Bowie

37,99 €*

Numark x Jesse Dean Designs

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

Go to Item

PT01 Scratch x JDDX2RS-A Fader (HHV Bundle)

199,99 €*

Stylophone S-1 Bowie Carry Case

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The New Era of Scratch
It’s a new era for DJs! With the PT01 Scratch portable turntable, you can scratch and cut—anywhere. Built with Numark’s exclusive Adjustable Scratch Switch™, PT01 Scratch enables you to grab your favorite scratch record (not included) and perform any turntablist scratch routine, whether you have access to AC wall power or you’re outdoors with your friends.

While keeping FRESH with a dope paint job, PT01 Scratch is designed for any DJ that is passionate for the art of turntablism and enjoy digging for vinyl records.

Transform, Cut, and Scratch
Yes! There’s an Adjustable Scratch Switch™ that gives you the perfect way to scratch, plus it’s adjustable for either right-handed or left-handed scratching styles. You can simply unscrew the scratch switch and adjust it to your style. Our scratch and slide switch performs longer than ordinary sliders, plus, unlike others, it’s user-replaceable, so the action never stops! PT01 Scratch comes equipped with a red slip-mat to perform light to heavy-handed scratches with your scratch records.

Battle anybody—we don’t care who you tell!
Connect your phone or any audio source to play a background beat through the 1/8” stereo input and scratch along to the beat. Increase the volume with the gain control and play it loud and strong on the built-in speaker. You can also connect PT01 Scratch to other equipment via the RCA stereo outputs or use the headphone output for private listening.

Record digitally to your laptop
In addition to scratching and having fun, you also have the capability to record your vinyl digitally via USB to your laptop (with free downloadable software).

Portability and Battery
PT01 Scratch plugs into a wall outlet (AC wall adapter included) and it also runs on batteries. It’s enclosed in a hard case for protection and has a sleek red handle to carry it anywhere.

FEATURES:

• Built-in adjustable Scratch Slide Switch
• User-replaceable scratch slide-switch keeps the action going
• Protective dust cover and integrated carrying handle
• Wall-powered with included AC adapter or six batteries(not included)
• Built-in speaker
• Cartridge included
• Removable slip-mat
• Class-compliant USB connection for PC recording
• 33 1/3, 45 and 78 RPM settings
• RCA line and headphone outputs
• 1/8" Aux input with adjustable volume

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE: THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS-A.

Go to Item

Dubreq

11,19 €* 15,99 € -30%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OFFICIAL BOWIE STYLOPHONE CARRY CASE

Bowie Stylophone Logo on the front

SPECIAL SECURE FIT DESIGN

Special secure-fit design – Made from stress-resistant EVA Internal mesh pocket for accessories

BOWIE ZIPPER TAG

Embossed Bowie logo and Stylophone logo zip tags

The Stylophone S-1 Bowie fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S-1 Bowie synthesizer

Go to Item

Keep Them Spinning

Vinyl Break

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

Go to Item

Ultimate Pick Foam Flight Case Wolfmix W1

169,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Flight Case Wolfmix W1 Black not only transport your Wolfmix W1 easily & securely, but also facilitates the Wolfmix W1 to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Wolfmix W1 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Wolfmix W1 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

Weight 4,15 kg / 9.13 lbs
Outer Dimensions (W x H x D) 31.7 x 22.6 x 13.4 cm | 12.5 x 8.9 x 5.3 inch
Inner Dimensions (W x H x D) 22.2 x 19.6 x 5.5 cm | 8.7 x 7.7 x 2.2 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corner
Extra's Convenient 80 mm space at rear for connections & PSU storage
Fits Wolfmix W1

Go to Item

Ultimate Flight Case Set PLX9/SL1200 MK2 Plus (Laptop Shelf + Wheels)

419,99 €*

Flying Record Strapback Cap

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES:
• Fits: 2x Pioneer PLX-1000 / Technics SL1200 turntable and 1x Pioneer DJM-S7 Mixer + 1 x Laptop + Accessories
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Built-in corner wheels with high quality in-line skate bearings for convenient transport
• Adjustable laptop shelf
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

DIMENSIONS:
(Width x Height x Depth)

Outer: 134,5 x 51 x 23 cm
Inner turntable compartment: 45,4 x 38,7 x 7,6 cm
Inner mixer compartment: 47 x 27,7-39,5 x 7,6 cm

Weight: 25 kg | 55 lbs

Go to Item

Don't Sleep Records

32,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Custom stitched 6 panel strap back hat with brass clasp, embroidered logo on front, woven label on back of cap and custom Don't Sleep in-seam tape.

Don't Sleep Records Flying Record Strapback Cap - Features:

• mid rise 6-panel construction
• Don't Sleep Records branding embroidered on front
• tonal eyelet stitching
• curved contrast visor
• adjustable leather strap with metal buckle plus Don't Sleep Records woven flag label at the rear
• interior includes branded tapes and a moisture-absorbing sweatband
• 100% cotton twill

Go to Item

Creator Denon DJ SC Live 2 Hardcase

129,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Denon DJ SC LIVE 2, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Denon DJ SC LIVE 2

Specifications:
• Weight: 3,50 kg / 7.7 lbs
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 66.1 x 39.9 x 11.2 cm | 26.0 x 15.7 x 4.4 inch
• Material: Durashock molded EVA foam

Go to Item

myVolts

Pocket Operator Case

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylophone S-1 Carry Case

Dubreq

13,49 €* 14,99 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PICK UP AND PLAY ON THE GO

Stylophone S1 Carry Case

EMBOSSED LOGO: Embossed logo on front
PERFECT FIT: Your Stylophone fits neatly and securely into the case.
PROTECTION: The Carry Case is made of EVA to protect your Stylophone
ZIP TAGS: with Stylophone logo
MESH: The Stylophone Carry Case has an internal black mesh which can store accessories

The Stylophone S1 fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S1 synthesizer

Go to Item

Cambridge Audio

SX60

369,00 €*

Chateau Vinyl Cotton (75)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Standmount Speakers

• 25mm silk dome tweeter – for refined presentation
• 165mm treated paper cone – for a smooth & even frequency response
• Precisely optimised crossovers – for a neutral, phase linear, response
• CAD modelled rigid MDF cabinet – reduces standing waves, keeping internal vibration to a minimum
• Refreshed clean design – designed to complement today’s interiors

SX60. Sound Comes First
SX60 standmount speakers build on the strengths of SX50, taking on a larger form-factor for an assured musical performance. They can work happily in bigger spaces, while still offering you flexibility in terms of placement. Speaker stands or a cabinet top, it’s your call. SX60’s combination of engineering, confident sound reproduction, and price makes them a winning combination.

Rock Solid Foundations
Hi-fi speaker engineering starts with the cabinet. Computer-aided design (CAD) was used extensively to refine SX60’s internal structures, to ensure that while the drivers are vibrating with your music, the cabinet isn’t. This means that every millimetre of movement from the drivers is directed where it should be – at you.

Stand and Deliver
SX60 speakers have a 165mm (6.5") woofer made from treated paper. Hi-fi manufacturers have used it for years, as paper’s impressive strength-to-weight ratio is matched by excellent tonality – so instruments sound rich, well defined, and real. 25mm (1") soft dome tweeters, made from treated silk, take care of the higher frequencies – with the same balance of realism and refinement.

Two Drivers, One Voice
Our team in London took great care and attention when designing the crossovers in SX60 – as they’re responsible for ensuring that each driver receives the correct frequency. Accuracy of timing and stereo imaging depend on phase remaining completely linear, from top to bottom. The result? Your music sounds engaging, energetic and real.

Engineered, Front to Back
Attention to detail on SX60 runs from front to back. There’s a neat bass reflex port, directly under the woofer, which emphasises lower frequencies to provide rich engaging sound. Spin SX60 around to reveal a pair of high-quality speaker binding posts (connectors), which can accept thick speaker cable – with or without banana plugs.

Designed for Real Life
New look SX60’s clean, understated design allows them to sit in a variety of spaces, and work well in all. Leave the grilles on to protect the drivers from little fingers, or to gain acceptance from your interior designer – alternatively take them off to celebrate your great taste in music (and speakers).

Technical specifications:
• SENSITIVITY: 89dB
• FREQUENCY RESPONSE: 41Hz - 22 kHz
• IMPEDANCE: 8 Ohms
• RECOMMENDED AMPLIFIER POWER: 20-100 watts
• DRIVERS: Tweeter: 1 x 25mm (1") silk dome tweeterMid/Bass: 1 x 165mm (6.5") doped paper cone
• CROSSOVER: 2 way
• PORTED: 1 front
• COLOUR: Black Matte
• DIMENSIONS (HXWXD): 340 x 200 x 272mm (13.3 x 7.9 x 10.7")
• WEIGHT: 5.0kg (11lbs)

Go to Item

airbag craftworks

328,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: black

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

RCA-CC (82cm)

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ecler

Eternal Crossfader

175,00 €*

Montero Bluetooth Speaker

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-01

ETERNAL Crossfader is an inductive fade technology based on a magnetic control patented by Ecler. An extremely light aluminium screen (0,5 gr.) cuts the flux lines of a magnetic field created between two sets of coils. This electromagnetic modulation controls an assigned Voltage Controlled Amplifier that modifies the gain/attenuation of the signal. The contactless technology is combined with a custom high quality glides mechanism to offer a very smooth touch and succeed the most accurate Crossfader system.

The ETERNAL concept does have obvious advantages upon other existing Systems using optical technology. Unlike optoelectronic elements, the inductive concept is resistant to smoke, moisture, temperature and aging. Other electromagnetic systems found on the market are particularly sensible to the lateral room of the mechanism, and have heavier mobile elements (magnets or iron plates) that add an excessive weight to the crossfader. Such systems usually have a strange feel that can bother highly precise manipulations such as Scratching and Beat Juggling.

Field technology tested over 20.000.000 Operations, Eternal Crossfader is the revolutionary fader admired for turntablism djs and hip hop community. Suitable with NUO2.0, and the NUO3.0, NUO4.0 and HAK Series legacy products.

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Go to Item

Crosley

137,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Turn it up to 11 with the Montero Speaker! With 15 hours of uninterrupted play on a single charge of the built-in lithium battery, this small-but-mighty 20 watt powerhouse will rock your party from beginning to end. You don’t have to be tech savvy to enjoy this speaker, short press the power button once to turn on and short press twice to power off. The aux input enables you to hook up the Montero to your existing stereo setup, or you can transmit your digital tunes wirelessly using the built-in Bluetooth receiver. There’s also a built-in USB charger for those times when your phone battery is hovering way too close to 1%. Never again will a dead phone battery ruin your good time! Keep your party going all night with the stylish and powerful Montero Speaker.

Specifications:
• Built-in Bluetooth® Receiver
• 20 Watt Amplifier
• Built-in Lithium Battery
• Auxiliary Input
• USB Phone Charger
• Unplug Unit Before Powering Off
• Dimensions: 26 cm (w), 16,5 cm (h), 5,7 (d)
• Weight: 1,25 kg

Go to Item

Nagaoka

DJ-44G - Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

Go to Item

Phono RCA-C (185cm)

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Magma

CTRL Case DJM-V10/DJM-A9

139,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Introducing the CTRL CASE DJM-V10/DJM-A9 - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit both, the latest Pioneer DJM-A9 and DJM-V10 club-mixer models, providing maximum protection with a Durashock molded EVA shell and fully padded interior. Plus, it features a convenient slot for storing audio cables and power adapters.

FITS:

• Pioneer DJM-A9
• Pioneer DJM-V10

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam plus fully padded interior
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 57 x 56 x 15 cm
• Inner measures DJM-V10: 46 x 44 x 7 cm / DJM-A9: 43 x 41 x 7 cm (Equipment slot)
• Weight: 2,3 kg

Go to Item

Magma

CTRL Case Four

139,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Introducing the CTRL CASE FOUR - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit the latest Rane Four DJ-controller, providing maximum protection with a Durashock molded EVA shell and fully padded interior.

FITS:

• Rane Four

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam and 4 EVA foam-corners
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 87 x 46 x 14 cm
• Inner measures: 78,5 x 39,5 x 11 cm
• Weight: 2,65 kg

Go to Item

Stylus 20

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-05

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 25 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H
*) Typical value

Go to Item

Stylus 510 MK II

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Go to Item

Stylus 14

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Go to Item

Stylus D 25 M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Go to Item

Stylus 78

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Go to Item

Stylus 7

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Go to Item

Stylus 3E

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Go to Item

Stylus 5S

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Go to Item

One Nation Crewneck Sweater

49,99 €*

Available Sizes: S, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick One Nation Crewneck Sweater's features include:
• rib crew neck with interior tape
• vinyl record graphic printed at left chest
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

OD Tag Hoodie

125,99 €* 139,99 € -10%

Available Sizes: M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MF DOOM OD Tag Hoodie´s features include:

Premium alpine green 13.5oz/450gm heavyweight crossgrain fleece hoodie.
Features multi-color discharge screen printed front.
Includes 2 color multi-level embroidered mask on sleeve.
Custom GasDrawls sewn tag on inside neck line.
Antique silver eyelets and drawcord tips.
70% Cotton / 30% Polyester.
Double fleece lined hood.
Heavy duty 100% cotton shoestring drawcord.
21 singles face yarn for a durable and textured fabric face.
Double ribbing side panels for stretch.
Reverse coverstitch sewing on all seams for durability and a premium finish.
Body and hood panels sewn cross-grain to limit shrinkage and shortening after wash.
520gsm 100% cotton 1x1 ribbing at cuff and waistband.

Go to Item

OD Tag Youth Shirt

26,99 €* 29,99 € -10%

Available Sizes: YOUTH S, YOUTH M, YOUTH L, 2T, 4T, 5/6T

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MF DOOM OD Tag Youth Shirt is equipped with the following features:

100% ringspun cotton, 4.5 oz black unisex youth shirts.
Features multi-color discharge screen printed front.

Go to Item

OD Tag T-Shirt

Jesse Dean Stanton STX Fader Skully Face Plate

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MF DOOM OD Tag Tee is equipped with the following features:

100% cotton, 6 oz heavyweight green shirt.
Features multi-color discharge screen printed front.
Printed Gas Drawls label on inside neckline.
Made with sustainable, fairly grown US cotton.
Set-in rib collar with shoulder to shoulder taping.
Seamless double needle ⅞” collar.
Double needle sleeve and bottom hem.
Pre-shrunk.

Go to Item

Jesse Dean Designs

11,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Go to Item

LH-4000 Headshell

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

Go to Item

LH-2000 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Go to Item

Super OM 5E

85,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Go to Item

OM 5E

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

OM 5S

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

SH-4 Headshell

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

Go to Item

High Power it

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Unkraut Vergeht Nicht T-Shirt

Danger Dan

27,99 €*

LP Storage Box "A Vulgar Display of Vinyl" (68)

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Danger Dan Unkraut Vergeht Nicht Tee is equipped with the following features:
• rib crew neck with interior tape
• Unkraut Vergeht Nicht artwork printed on front
• regular fit
• Organic unisex T-Shirt with reduced CO₂ emissions, material composition: 100% organic cotton (GOTS), jersey 155g/m²

Go to Item

Musicbox Designs

74,99 €* 99,99 € -25%

7" Storage Box "Singles Going Steady" (140)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

Go to Item

Musicbox Designs

74,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.
After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Go to Item

Little Fwend

Little Disco Fwend

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Olympia

180,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Pearl

110,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Black Pearl

75,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moonstone MM-Tonabnehmer

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Olympia MM-Tonabnehmer

249,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Rainier MM-Tonabnehmer

175,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pearl MM-Tonabnehmer

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Black Pearl MM-Tonabnehmer

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Oyster MM-Tonabnehmer

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Throw Up T-Shirt

Highend Dual Absorber (Set of 4)

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Simple, to the point, and with a strong message. A tribute to the greatest underground artist who made a powerful impact on hip hop during the last 20 years.

The MF Doom Throw Up Tee is equipped with the following features:

100% cotton, 6oz heavy weight green shirt.
Features 2 color “DOOM” throw chest print in yellow & white.
Printed GasDrawls label on inside neckline.
Made with sustainable, fairly grown US cotton.
Set-in rib collar with shoulder to shoulder taping.
Seamless double needle ⅞” collar.
Double needle sleeve and bottom hem.
Pre-shrunk.

Go to Item

Dynavox

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dual

CS 329

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf

Go to Item

Stylus Guard for VNL

7,42 €* 9,90 € -25%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Styli protection caps for VNL cartridges and styli

The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.

The protection caps come in pairs.

Go to Item

"In ViNyL We Trust" Slipmat

19,90 €*