HHV Records 494 Items

Release: 2023 / Original

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Barbra Streisand 3" Limited Edition

Stokyo x Duck Sauce

3" | 2023 | Original (Stokyo)

Release: 2023 / Original

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

C60 Type One Blank Audio Cassette (HHV Bundle)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Bundle contains 5x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Go to Item

C60 Type One Blank Audio Cassette

6,49 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Go to Item

C60 Type One Blank Audio Cassette (HHV Bundle)

58,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Bundle contains 10x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Go to Item

C60 Type One Blank Audio Cassette (HHV Bundle)

18,59 €*

Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Bundle contains 3x RTM C60 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Go to Item

We Are Rewind x RTM

154,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We Are Rewind x RTM - Portable BT Cassette Player + RTM Tape C60 (HHV Bundle)
The Bundle contains 1x We Are Rewind Portable BT Cassette Player (Serge Orange) and 1x RTM Tape C60.

We Are Rewind Portable BT Cassette Player (Serge Orange)

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

RTM Tape C60

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2018 ONWARDS
• MADE IN FRANCE

60 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 87.5m
• Recording time: 60min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 12 µm
• Coating thickness: 4,7 µm
• Total thickness: 16,7 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

Go to Item

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Simple, to the point, and with a strong message. A tribute to the greatest underground artist who made a powerful impact on hip hop during the last 20 years.

The MF Doom Throw Tee is equipped with the following features:

• rib crew neck with interior tape
• 2-color Doom artwork printed on chest
• oversized fit with dropped shoulders
• 100% cotton heavyweight single jersey, 8.2 oz (pre-shrunk to minimize shrinkage)

Go to Item

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Available Sizes: S, M, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Disk Union

Reco-Cloth

7,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disk Union official Record Cleaner "Reco-Cloth".

Wiping cloths developed by diskunion for professional use.

It quickly adsorbs cleaning solution that incorporates dirt. Special non-woven fabrics are used that do not fluff or leave fibers behind, and have low electrostatic properties.

*Please be careful not to press down harder than necessary, as this may cause scratches on the surface. Cannot be used on surfaces other than the record sound groove or disc signal surface. Use on label surface or sleeves may damage the materials.

VOLUME: 50 sheets

- 3 Main Features as a Professional Cleaner -

Superior Workability - Simple and speedy adsorption and water absorption performance.

Low Cost - Focused on a balance between durability and usability, and acheved both performance maintenance and low running cost.

Harmless and Environmentally Friendly - Additive-free cellulose non-woven fabric made only from non-petroleum based raw materials.

Go to Item

Looptroop Rockers

Baseball Script T-Shirt

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Looptroop Rockers Baseball Script Tee is equipped with the following features:
• rib crew neck with interior tape
• Baseball Script artwork printed on front and back
• relaxed fit
• 100% cotton single jersey

Go to Item

L.I.E.S. Cards S/S T-Shirt

34,96 €* 49,95 € -30%

Available Sizes: 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Cards S/S Tee is equipped with the following features:
• rib crew neck with interior tape
• L.I.E.S. dices branding printed on left chest
• Cards artwork printed on the rear
• relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

Broken Heart L/S T-Shirt

50,95 €* 59,95 € -15%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Broken Heart Longsleeve Tee's features include:
• rib crew neck with interior tape
• L.I.E.S. graphic printed on left chest
• stretch rib cuffs
• Broken Heart artwork printed on the rear
• relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

Cloud of Smoke S/S T-Shirt

42,45 €* 49,95 € -15%

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Cloud of Smoke S/S Tee is equipped with the following features:
• rib crew neck with interior tape
• L.I.E.S. Records branding printed on left chest
• Cloud of Smoke artwork printed on the rear
• regular/relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

L.I.E.S. Statue L/S T-Shirt

44,96 €* 59,95 € -25%

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Statue Longsleeve Tee's features include:
• rib crew neck with interior tape
• L.I.E.S. Statue artwork printed on front
• stretch rib cuffs
• additional Serious Jack Noise lettering printed on right sleeve
• relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

1UP

One Love T-Shirt

44,99 €*

Jesse Dean Stanton STX Decal Kit

Available Sizes: L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 1UP One Love Tee is equipped with the following features:
• rib crew neck with interior tape
• 1UP One Love graphic printed at left chest
• regular fit
• 100% organic cotton single jersey, 190 g/m²
• made in Portugal

Go to Item

Jesse Dean Designs

12,99 €*

Jesse Dean Stanton STX Corner Pads

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Go to Item

Jesse Dean Designs

15,99 €*

Musikkassetten / Tapes Holzregal

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Go to Item

Cassette Rack

31,99 €* 39,99 € -20%

12" Vinyl Schallplatten Metallständer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Store your mixtapes and radio plays in style in our cassette rack. The 385 x 385 x 50 mm shelf, which is made of pine wood and painted white, has space for a total of 48 cassettes.
The cassette rack is part of the Vinyl Care by HHV product range, which stands for high-quality, clearly designed and affordable solutions for passionate vinyl collectors.

Go to Item

Vinyl Record Stand

26,39 €* 32,99 € -20%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

There is space for around 40-50 records in this practical record stand, which invites you to browse. Thanks to its powder-coated metal construction, dimensions of 25 x 25 x 23 cm and clear design, the stand fits into any room and is also suitable for professional use.
We have developed Vinyl Care by HHV for passionate vinyl collectors. In addition to practical cleaning products for vinyl, we offer storage solutions and gift ideas under this label that will make every record lover's heart beat faster.

Go to Item

Acrylick

BBQ Bangers T-Shirt

28,49 €* 29,99 € -5%

DJ Q-Bert x Shortkut x D-Styles

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Acrylick BBQ Bangers T-Shirt - Features:
• rib crew neck with interior tape
• Acrylick branding printed on left chest
• Acrylick BBQ Bangers artwork printed on the rear
• relaxed fit
• 100% cotton single jersey, 6 oz

Go to Item

FUGITIVES OF FUNK Algoriddim djay PRO AI Control Vinyl

35,99 €*

DJ Q-Bert x Shortkut x D-Styles

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" Orange).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on STOKYO Thin Press©️ Orange 12" Vinyl

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

Go to Item

FUGITIVES OF FUNK Algoriddim djay PRO AI Control Vinyl

35,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" White).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on WHITE on STOKYO Ultra-Thin Press©️ Vinyl (6% Lighter than Orange!)

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

Go to Item

7" Schallplatten Aufbewahrung (100)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.
Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Go to Item

Connect it LS S2 (400cm)

65,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

Beastie Boys

Canned Socks

19,95 €*

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Step out of line with the Stance x Beastie Boys Canned Socks. This item is equipped with fine yarn dyed details, a solid color scheme, Stance logo embroidery as well as reinforced toe and heel, seamless toe closure, and terry loops for cushioning, plus deep heel pockets complement your arch with that feel-good fit. Comfortable, soft stretch fabric made from 77% polyester, 19% combed cotton, 2% nylon, 2% elastane.

Go to Item

Ultimate Fold Out DJ Table MK2 Plus (Wheels)

299,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Fold Out DJ Table is the perfect companion piece for the DJ who likes to go completely modular. Use it for a home studio set up or on stage. Constructed from sturdy 9mm thick plywood, the outer sides are laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern. It features built-in center wheels on one side with high quality in-line skate bearings for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading.

UDG Ultimate Fold Out DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down.

FEATURES:
• Increased product dimension over earlier version
• Updated with rounded corner table
• Includes new cable access with cover
• Improve powder coated anodized hardware
• Heavy duty construction of 9 mm vinyl laminated plywood
• Laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern
• Solid aluminum profiles and spring-loaded latches
• Powder coated and anodized hardware
• Sturdy construction
• UDG heavy-duty spring-loaded handles
• Built-in center wheels with high quality in-line skate bearings for convenient transport
• Utility shelf for storage
• Recessed butterfly twist latch lock
• Holds a Maximum Weight of 45 kg/ 100 lbs. Evenly Distributed

DIMENSIONS:
(Width x Height x Depth)

Folded: Folded: 83.5 x 91.0 x 12.0 cm | 32.9 x 35.8 x 4.7 inch
Opened: 136.0 x 91.0 x 48.0 cm | 53.5 x 35.8 x 18.9 inch

Weight: 24,30 kg / 53.46 lbs

Go to Item

DMX Krew

Still Got It T-Shirt

29,69 €* 32,99 € -10%

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Screen printed on Continental 100% Combed Organic Cotton (CO2 neutral, vegan)

Go to Item

Hello Nasty Crewneck Sweater

74,96 €* 99,95 € -25%

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Champion x Beastie Boys Hello Nasty Soft Fleece Crewneck Sweatshirt's features include:

• rib crew neck with interior tape
• self-fabric side panels
• stretch rib cuffs and bottom band
• Beastie Boys lettering printed on left chest
• Beastie Boys Hello Nasty artwork printed on the rear
• Champion "C" logo embroidery at left cuff
• regular fit
• 86% cotton, 14% polyester heavyweight TCV reverse weave brush-back fleece, 400 g/m²

Go to Item

Hello Nasty Sardine Can Cover T-Shirt

49,95 €*

Available Sizes: L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The basic classic for sporty guys, including a vintage Beastie Boys print for an authentic retro look. Great quality and processing, nice shape.

The Champion x Beastie Boys Hello Nasty Sardine Tin Cover T-Shirt's features include:

• rib crew neck with interior tape
• Beastie Boys original graphic printed on front
• Champion C logo embroidered on left sleeve
• regular fit
• 100% combed cotton single jersey, 180 g/m²

Go to Item

Hello Nasty Intergalactic T-Shirt

34,96 €* 49,95 € -30%

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The basic classic for sporty guys, including a vintage Beastie Boys print for an authentic retro look. Great quality and processing, nice shape.

The Champion x Beastie Boys Hello Nasty Intergalactic T-Shirt's features include:

• rib crew neck with interior tape
• Beastie Boys lettering printed on front
• Beastie Boys Hello Nasty Intergalactic artwork printed on the rear
• Champion C logo embroidered on left sleeve
• regular fit
• 100% combed cotton single jersey, 180 g/m²

Go to Item

Hello Nasty Intergalactic Photo T-Shirt

49,95 €*

Music From Patch Cord Productions Longsleeve

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The basic classic for sporty guys, including a vintage Beastie Boys print for an authentic retro look. Great quality and processing, nice shape.

The Champion x Beastie Boys Hello Nasty Intergalactic Photo T-Shirt's features include:

• rib crew neck with interior tape
• Beastie Boys original graphic printed on front
• Champion C logo embroidered on left sleeve
• regular fit
• 100% combed cotton single jersey, 180 g/m²

Go to Item

Mort Garson

37,99 €*

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Mort Garson Music From Patch Cord Productions Longsleeve - Features:
• rib crew neck with interior tape
• Music From Patch Cord Productions artwork printed on front and back
• additional graphics printed on sleeves
• stretch cuffs
• regular fit
• 100% cotton single jersey

Go to Item

Ba Dum Tish

Logo T-Shirt

27,99 €* 34,99 € -20%

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ba Dum Tish Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Ba Dum Tish logos printed on left chest and on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Discogs

Shark T-Shirt

37,99 €* 39,99 € -5%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Discogs Shark Tee is equipped with the following features:
• rib crew neck with interior tape
• Shark artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Ultimate Audio Cable Set RCA Straight-RCA Angled Orange 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack White Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack Orange Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA White Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA Orange Straight 3m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack Orange Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA White Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set RCA - RCA Orange Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ultimate Audio Cable Set 1/4'' Jack-1/4'' Jack White Straight 1,5m

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Nas

Stillmatic Photo T-Shirt

10x 12" Record Inner Sleeves

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Nas Stillmatic Photo Tee is equipped with the following features:
• rib crew neck with interior tape
• Stillmatic Photo artwork printed on front
• Nas Stillmatic lettering printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Innenhüllen GRS-LP10 (Japan Sleeves / weiß)

19,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

• Made from environmentally friendly glassine paper
• including fold-over flap
• perfect for long term storage of high quality vinyl
• 10 pack
• for records with a diameter of 12' (30.48cm), dimensions approx.: 308 x 308 mm
• Made in Japan

Go to Item

Madlib

Headlib T-Shirt

34,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Madlib Headlib Tee is equipped with the following features:
• rib crew neck with interior tape
• Headlib artwork printed on front
• regular fit
• 100% cotton tubular jersey, 6 oz
• preshrunk to minimize shrinkage

Go to Item

Led Zeppelin

Electric Magic T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Led Zeppelin Electric Magic Tee is equipped with the following features:
• rib crew neck with interior tape
• Electric Magic artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Sun Records & Elvis

Rock & Roll T-Shirt

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sun Records & Elvis Rock & Roll Tee is equipped with the following features:
• rib crew neck with interior tape
• Rock & Roll artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Beach Boys

1988 Tour T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beach Boys 1988 Tour Tee is equipped with the following features:
• rib crew neck with interior tape
• 1988 Tour artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Pop Trading Company

Corn Skateboard

69,95 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Pop Trading Company Corn Skateboard is an 8.375 inch wide deck made in china by Dwindle from 7-ply Canadian maple, equipped with a seasonal POP graphic. Attention: The stain color may vary!

Go to Item

Dubreq

Stylophone S-1 Bowie

37,99 €*

Flying Record Strapback Cap

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

Go to Item

Don't Sleep Records

32,99 €*

Montero Bluetooth Speaker

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Custom stitched 6 panel strap back hat with brass clasp, embroidered logo on front, woven label on back of cap and custom Don't Sleep in-seam tape.

Don't Sleep Records Flying Record Strapback Cap - Features:

• mid rise 6-panel construction
• Don't Sleep Records branding embroidered on front
• tonal eyelet stitching
• curved contrast visor
• adjustable leather strap with metal buckle plus Don't Sleep Records woven flag label at the rear
• interior includes branded tapes and a moisture-absorbing sweatband
• 100% cotton twill

Go to Item

Crosley

137,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Turn it up to 11 with the Montero Speaker! With 15 hours of uninterrupted play on a single charge of the built-in lithium battery, this small-but-mighty 20 watt powerhouse will rock your party from beginning to end. You don’t have to be tech savvy to enjoy this speaker, short press the power button once to turn on and short press twice to power off. The aux input enables you to hook up the Montero to your existing stereo setup, or you can transmit your digital tunes wirelessly using the built-in Bluetooth receiver. There’s also a built-in USB charger for those times when your phone battery is hovering way too close to 1%. Never again will a dead phone battery ruin your good time! Keep your party going all night with the stylish and powerful Montero Speaker.

Specifications:
• Built-in Bluetooth® Receiver
• 20 Watt Amplifier
• Built-in Lithium Battery
• Auxiliary Input
• USB Phone Charger
• Unplug Unit Before Powering Off
• Dimensions: 26 cm (w), 16,5 cm (h), 5,7 (d)
• Weight: 1,25 kg

Go to Item

Operation Doomsday T-Shirt

33,99 €* 39,99 € -15%

Portable BT Cassette Player

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MF DOOM Operation Doomsday Tee is equipped with the following features:

100% cotton, 6 oz heavyweight white shirt.
Features multi-color discharge screen printed front.
Printed Gas Drawls label on inside neckline.
Made with sustainable, fairly grown US cotton.
Set-in rib collar with shoulder to shoulder taping.
Seamless double needle ⅞” collar.
Double needle sleeve and bottom hem.
Pre-shrunk.

Go to Item

We Are Rewind

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

(Re)discover all the pleasure of analog sound with our modernized cassette players: Serge, Keith and Kurt.

Like the old-school cassette players, our players have fast forward/rewind buttons, a headphone output, a volume control and an audio input so you can create your own mixtapes.

But because you have to keep up with the times, we've added a few modern touches.

First, we've replaced the batteries with a rechargeable lithium battery that provides up to 12 hours of continuous playback. It's more practical and environmentally friendly. We also built in a Bluetooth 5.1 connection so you can connect the player to your headphones or wireless speaker in seconds. It may not sound like much, but it's a world first!

On the audio side, our engineers worked hard to optimize the mechanism to be as close as possible to the best of the time. And the result is there. Today, you won't find better on the new market!

Finally, we paid special attention to the design and materials used. As for the very first Sony Walkman, the TPS-l2, we avoided plastic and preferred an aluminum case for a "cool touch" and a real quality feeling. The result is a cassette player with a sober and elegant design, which will last in time. The kind of object that one would almost want to display on a shelf in the living room.

So, ready to rewind?

Available in 3 colors: Orange (SERGE), Blue (KURT) and Grey (KEITH).

Specifications:
• Compatible with compact audio cassettes, all Types I to IV
• 2-track stereo playback
• Frequency response: 30Hz - 12500Hz with Type I cassette
• Signal-to-noise ratio: 50dB
• Distortion: 0,3% typ.
• Wow & Flutter: 0,2% typ.
• Headphones output power: 2x2mW into 32 ohms
• Bluetooth 5.1 (headphones and speakers compatible)
• Not compatible with earbuds
• Stereo recording via 3,5mm RCA jack
• Input level 50mVrms to 200mVrms typ.
• Frequency response: 30Hz - 10000Hz with Type I cassette
• Signal-to-noise ratio: 45dB
• Distortion: 1% typ.
• Built-in Lithium-Ion rechargeable battery
• Nominal voltage 3,7V
• Nominal capacity 2000mAh
• Battery life: approx. 10 to 12 hours
• Dimensions: 140,8 x 88,8 x 33,5mm
• Weight: approx. 404g

Go to Item

Sumiko

Stylus Rainier

120,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sumiko

Rainier MM-Tonabnehmer

175,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

"Cause I Can Do It In The Mix" Slipmat

Ortofon

19,90 €*

"DJs Are The New Rockstars" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome logo design developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

Go to Item

Ortofon

19,90 €*

FLUX-Sonic Nadelreiniger (Limited Edition)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Flux Hifi

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

Go to Item

Debut PRO White Edition (Ortofon 2M White)

799,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raises the bar even higher.

A MILESTONE FOR THE NEXT DECADES
The Debut PRO brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.
The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality.

The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function.

DEEPLY DRIVEN
The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.

A NEW PLATTER – A DEEPPER DISH
The new Debut PRO platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO has to offer!
The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO.

HYBRID TONEARM
The new Debut PRO features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges!

AZIMUTH & VTA ADJUSTMENT
The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

Features:
Pick it PRO
Lively and robust sound
The perfect combination of components is the key to achieve the great sound of the Pick it PRO.

Nickel Coating
Sustainable components
The nickel finish of the aluminium components results in a hard, resistant surface.

Hybrid Tonearm
Carbon Aluminium Sandwich
This super stiff and uniquely dampened tonearm ensures perfect tracking of the record groove.

VTA & Azimuth
Fully adjustable
The Debut PRO comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.

33/45/78 RPM
High precision motor control
The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.

Bearing block
Complete new design
The precision CNC milled and nickel coated tonearm bearing parts are completely new and designed just for the PRO.

Special Platter
TPE damped & anti magnetic
The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.

Metal Feet
Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Technical Specifications:
• Speed: 33, 45/(78) (electronic speed change)
• Drive principle: belt drive with electronic speed control
• Platter: 300mm, die cast aluminium platter with TPE damping and felt mat
• Platter bearing: high precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0,16%; 45: +/-0,14%
• Speed drift: 33: +/-0,40%; 45: +/-0,50%
• Signal to noise: 68dB
• Tonearm: 8,6” one-piece carbon-aluminium tonearm
• Effective arm length/mass: 218,5 mm / 10,0 g
• Overhang: 18,5mm
• Included accessories: 15V DC / 0,8A power supply, dust cover, 78 RPM round belt, 7‘‘ single adapter
• Power consumption: 4W / 0W standby
• Dimensions: 415 x 113 x 320mm (WxHxD)
• Weight: 6 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2021/07/PJ-Phono-DebutPro-Manual.pdf

Go to Item

Speaker Box 5 (Paar)

279,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2-way bookshelf speakers

And these are comments from audio testers:
• Well tuned and upbeat basslines
• Lively dynamics
• Surprisingly low coloration
• Good transparency and reasonable image depth
• Bass is fast and tuneful, this is what really matters!

Scope of delivery:
• 2x Speaker Box 5
• 2x speaker grill black
• 1x pair of gloves

Features:
• Audiophile bass-reflex design
• Gold-plated speaker terminal (single-wired)
• Simple Wall-mount included
• Magnetically shielded
• Front cover with magnetic attachment
• Speaker-Box Wall Bracket available as an option

Technical Specifications:
• Sensitivity (1W/1m): 86 dB
• Recommended amplifier power: 10 to 150 watts
• Tweeter: 25 mm Ø silk-dome Neodymium magnet
• Woofer: 130 mm Ø fiberglass cone
• Frequency response: 55 Hz - 20 kHz
• Impedance: 4 - 8 Ohms
• Dimensions: W x H x D 160 x 255 x 210 mm
• Weight: 4.2 kg

Go to Item

INXS

Kick T-Shirt

20,99 €*

VNL Premounted x SH-4 Headshell Black

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The INXS Kick Tee is equipped with the following features:
• rib crew neck with interior tape
• Kick artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Ortofon

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

Unearthed Sounds

Ravepoor T-Shirt

33,24 €* 34,99 € -5%

Jesse Dean Stanton STX Fader Skully Face Plate

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UE Ravepoor T-Shirt's features include:
• rib crew neck with interior tape
• Ravepoor Lettering printed on chest
• Unearthed Sounds logo prited at top rear
• regular fit
• 100% cotton single jersey

Go to Item

Jesse Dean Designs

8,39 €* 11,99 € -30%

Innovative Leisure x Cody Hudson

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Go to Item

Smoke T-Shirt

Innovative Leisure x Yung Lenox

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Chicago-based designer and artist Cody Hudson (Struggle Inc.) has become widely recognized for his creations of clean, multidimensional graphics, with elements of urban modernism and abstract compositions of shapes. His innovative graphic work and paintings have been exhibited throughout tje U.S., Europe, and Japan in numerous museums and galleries alongside collaborations with the likes of Nike, Stüssy & now Innovative Leisure.

Limited Edition Design by Cody Hudson (Struggle Inc) for 4/20. This year, it's not just a day, but an entire month.

The Innovative Leisure x Cody Hudson Smoke is equipped with the following features:

• rib crew neck with interior tape
• self-fabric patch pocket at left chest
• Innovative Leisure Smoke logo printed on chest pocket and the rear
• regular fit
• 100% cotton single jersey

Go to Item

Leisure Rules T-Shirt

26,99 €*

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Limited "Leisure Rules" tee designed by Yung Lenox. Yung Lenox is an 8 yr old renowned rap portraitist and Lego enthusiast from Seattle.

The Innovative Leisure x Yung Lenox Leisure Rules T-Shirt's features include:

• rib crew neck with interior tape
• Leisure Rules artwork printed on front
• logo printed at top rear
• regular fit
• 100% cotton single jersey

Go to Item

Khun Narin

Acid Cobra T-Shirt

23,99 €* 29,99 € -20%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Khun Narin Acid Cobra Tee is equipped with the following features:
• rib crew neck with interior tape
• Acid Cobra artwork printed on left chest
• regular fit
• 100% cotton single jersey

Go to Item

Beastie Boys

Check Your Head T-Shirt

22,49 €* 24,99 € -10%

Eine Gute Nachricht T-Shirt

Available Sizes: S, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys Check Your Head Tee is equipped with the following features:
• rib crew neck with interior tape
• Check Your Head artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Danger Dan

27,99 €*

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Danger Dan Eine Gute Nachricht Tee is equipped with the following features:
• rib crew neck with interior tape
• Eine Gute Nachricht artwork printed on front
• regular fit
• Organic unisex T-Shirt with reduced CO₂ emissions, material composition: 100% organic cotton (GOTS), jersey 155g/m²

Go to Item

Schallplattenturm (2x110 & 1x100)

89,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

Go to Item

Oliver Hart (Eyedea)

Cover T-Shirt

34,99 €*

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Oliver Hart (Eyedea) Cover Tee is equipped with the following features:
• rib crew neck with interior tape
• Cover artwork 4-color screen printed on chest
• regular fit
• 100% combed ring-spun cotton single jersey (5.1oz)

Go to Item

Großes Rollboard für 12" Aufbewahrung (2x110)

26,39 €* 32,99 € -20%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

Go to Item

Hifi-Rack für 12" Aufbewahrung (3x110)

35,99 €* 44,99 € -20%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record Box stands for high-quality and creative furniture for the presentation and storage of records. With the Record Box Hi-Fi-Rack, HHV responds to the desire to develop solutions for the safe storage of technology.

The Hi-Fi Rack spans the width of three Record Box modular boxes and provides space to hold an amplifier, receiver and other Hi-Fi technology. The piece of furniture with a continuous support surface is connected to the boxes stacked underneath with the help of silicone adhesive dots developed especially for Record Box.

With its multiple uses, sturdy construction and unbeatable value for money, the Hi-Fi Rack is a must-have for any household where vinyl collections and the associated technology are to be presented in an attractive and space-saving manner. Part of the Record Box system, the Hi-Fi Rack, available in black and white, is made of high-quality MDF and coated with a durable melamine resin surface.

Technical details:

• Available in black and white
• Material: 15 mm MDF with melamine coating
• Outer dimensions: 108x36x20cm (LxWxH)
• Inner dimensions: two compartments of 51,8x34,5x17cm (LxWxH)
• Connecting element: "Record Box" adhesive dots
• Width corresponds to the three-module boxes of the Record Box series
• Boxes for self-assembly - screwdriver required!

Please note that due to safety reasons, the Hi-Fi rack must rest fully on the boxes stacked underneath it.

Go to Item

Suicidal Tendencies

OG Flip Hat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Fold up the visor and sport an ST bandana to become a member of the infamous Suicidal Tendencies gang!

Suicidal Tendencies OG Flip Hat- features:

• high rise construction
• Suicidal Tendencies lettering printed on foamed front panel
• side and rear mesh panels
• tonal visor with signature Suicidal lettering on bottom
• snapback plastic closure
• interior includes plain taping and a moisture-absorbing sweatband
• 100% polyester

Go to Item

Descendents

Everything Sucks T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Descendents Everything Sucks Tee is equipped with the following features:
• rib crew neck with interior tape
• Everything Sucks artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

audio pro

Addon T3+

199,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Dark Entries

Logo T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Celebrating the "IRL outpost in the TL" with new white cotton Dark Entries logo tees to match the walls and new website launched. Printed by Bad Skulls in Oakland, CA.

The Dark Entries Logo Tee is equipped with the following features:

• rib crew neck with interior tape
• Dark Entries Logo printed on front
• regular fit
• 100% cotton single jersey

Go to Item

DiKi

Logo Slipmat

12,59 €* 17,99 € -30%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

DIKI logo slipmat for those Technics (pair).

Go to Item

Acrylick

Yukio Decks T-Shirt

19,49 €* 29,99 € -35%

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Yukio Decks Tee is equipped with the following features:
• rib crew neck with interior tape
• Acrylick Yukio Decks artwork printed on chest
• relaxed fit
• 100% cotton single jersey

Go to Item

Acrylick

Flavors T-Shirt

This Is What We Do White Opaque Vinyl Edition

Available Sizes: S, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Flavors Tee is equipped with the following features:
• rib crew neck with interior tape
• Acrylick branding printed on left chest
• Flavors artwork printed on the rear
• relaxed fit
• 100% cotton single jersey

Go to Item

Leftfield

2LP | 2022 | EU | Original (Virgin Music)

32,39 €* 35,99 € -10%

Release: 2022 / EU – Original

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disco-Antistat Schallplatten-Waschgerät - Generation 2 PLUS Ultraclean (Set)

Knosti

109,00 €*

Here Comes The Whistleman

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

NEW - Now with alcohol-free Disco-Antistat Ultraclean concentrate - NEW

Practical care set for record cleaning.
Disco-Antistat Ultraclean Concentrate, works deep into the groove and cleans your records gently and thoroughly even from stubborn dirt.

The care set consists of:
* Washing housing with inserted brushes made of goat hair and practical axle lock.
* Exchangeable cleaning brushes
* Label cover with suspension axle for LPs, singles and 10 inch
* 200ml Disco-Antistat Ultraclean concentrate (article no. 1302000) for record cleaning (makes 5 liters of cleaning solution)
* Bottle for mixing the cleaning agent
* Funnel and filter with which the liquid can be filtered back into the bottle after use.
* Drip stand (drying stand) with collection tray for up to 15 LPs or singles (slides into the case after use).
* Housing with NEW - non-slip rubber feet - NEW
* NEW - Label cover with sealing rubber and hand crank for LPs/Singles/10".
* NEW - Filling line "max." - NEW for marking the filling level of the cleaning liquid.

Made in Germany!

Go to Item

Roland Kirk

LP | 1967 | EU | Reissue (Modern Harmonic)

28,99 €*

Release: 1967 / EU – Reissue

Genre: Organic Grooves

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Coral Fang White Vinyl Edition

Distillers

LP | 2003 | EU | Reissue (Music On Vinyl)

28,99 €*

Release: 2003 / EU – Reissue

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

After the success of their second studio album, the punk rock band The Distillers signed to Sire Records in 2002. There, they released their major label debut Coral Fang the year after. The album was primarily influenced by grunge and lyrically was inspired by the fallout of Brody Dalle’s marriage and the media attention of it. It became their mainstream breakthrough. The album spawned three charting singles, “Drain The Blood”, “The Hunger” and “Beat Your Heart Out” and was received largely positive reviews from critics. Coral Fang featured explicit artwork by Tim Presley, but as many US retailers refused to stock the album, the band created an additional “safe” cover. This edition of Coral Fang features its original explicit artwork and is available as a limited edition on white coloured vinyl. It also includes an insert. T

Go to Item

Audio-Technica

AT-LP3XBT

289,00 €*

The Struggle Continues Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Go to Item

Looptroop Rockers

9,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

NESSIE

Trichter

6,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Upstruct

Original T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Upstruct Original Tee is equipped with the following features:
• rib crew neck with interior tape
• Upstruct Original artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

X2 B (Ortofon MC Quintet Red)

1.519,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PopartUK

12" Album Cover Frame

10,19 €* 11,99 € -15%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Look after your records and turn them into a work of art with this 12" frame. Make a centerpiece out of your favourite records, the perfect addition to any room in your home! The Lasgo 12" Album Cover Frame is perfect accompaniment for any music lover's music collection, made from compressed wood. Size: 36 x 36 cm (14" x 14").

Go to Item

X2 (Pro-Ject Pick it 2M Silver)

1.234,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Uncompromised heavyweight design combined with high-end features. The big brother of our X1 sets new standards.

Real high-end features.

Azimuth & VTA - Fully adjustable
The X2 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X2 as you want it.

Pick it 2M Silver - High-end cartridge
This cartridge uses internal silver plated copper coils, which guarantees outstanding sonic results! The X2 is available with or without the Pick it 2M Silver.

2 kg Platter - Resonance free acryl
The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character.

33/45/78 RPM - High precision motor control
A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button.

New motor suspension
A good motor by itself, is already very quiet. To get the best performance out of it, we have improved the motor suspension. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt - this way the motor chassis is effectively decoupled from the main plinth for optimal performance.

The Tonearm - 9'' Carbon-Aluminium Tonearm
Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight.
Compared with its little brother the X1, the tonearm is longer - 9“ in length - and the tube has a wider diameter. The carbon/aluminium sandwhich construction results in better internal damping. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges.

Metal Feet - Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Phono Cable - Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Technical Specifications:
•Speed: 33, 45, 78 (electronic speed change)
•Principle: belt drive
•Speed variance: 33: 0.25% 45: 0.20%
•Wow & flutter: 33: 0.12% 45: 0.10%
•Signal to noise: 70 dB
•Platter: 30mm thick, 2 kg heavy acryl
•Main bearing: stainless steel/brass
•Tonearm: 9” carbon/aluminium sandwich
•Effective arm length: 230 mm
•Overhang: 18 mm
•Effective tonearm mass: 13,5g
•Tracking force range: 0 - 30mN
•Included accessories: 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
•Power consumption: 4,5 watts max / 0.3 watt standby
•Dimensions: 460 x 150 x 340 mm (WxHxD)
•Weight: 10 kg

Manual: https://www.project-audio.com/wp-content/uploads/2021/01/X2-Manual.pdf

Go to Item

X1 (Pro-Ject Pick it S2 MM)

854,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Go to Item

Rage Against The Machine

Anger Gift T-Shirt

21,99 €*

12" Vinyl Frame Set (3 Stück) - MDF

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Rage Against The Machine Anger Gift Tee is equipped with the following features:
• rib crew neck with interior tape
• Anger Gift artwork printed on front and back
• regular fit
• 100% cotton single jersey

Go to Item

Record Box - Vinyl Frame

33,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

Go to Item

Record Box - Vinyl Frame

7" Vinyl Frame - MDF

8,79 €* 10,99 € -20%