HHV Records 1793 Items

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Korn Follow The Leader Tee is equipped with the following features:
• rib crew neck with interior tape
• Follow The Leader artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Type O Negative

Bloody Kisses T-Shirt

Available Sizes: S, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Type O Negative Bloody Kisses Tee is equipped with the following features:
• rib crew neck with interior tape
• Bloody Kisses artwork printed on front and back
• regular fit
• 100% cotton single jersey

Go to Item

Gojira

Fortitude Heart T-Shirt

21,99 €*

Consuming Impulse (Re-Issue)

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Gojira Fortitude Heart T-Shirt's features include:
• rib crew neck with interior tape
• Fortitude Heart artwork printed on front
• regular fit
• 100% cotton single jersey (organic)

Go to Item

Pestilence

LP | 2022 | EU | Original (Hammerheart)

26,99 €*

Release: 2022 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Psych Tubes T-Shirt

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The IDLES Psych Tubes Tee is equipped with the following features:
• rib crew neck with interior tape
• Psych Tubes artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

The House T-Shirt

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The IDLES The House Tee is equipped with the following features:
• rib crew neck with interior tape
• The House artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Gradient Heart T-Shirt

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The IDLES Gradient Heart Tee is equipped with the following features:
• rib crew neck with interior tape
• Gradient Heart artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Cartoon Flower T-Shirt

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The IDLES Cartoon Flower Tee is equipped with the following features:
• rib crew neck with interior tape
• IDLES Logo printed on left chest
• Cartoon Flower artwork printed on back
• regular fit
• 100% cotton single jersey

Go to Item

Big Daddy Kane

Half Steppin' T-Shirt

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Big Daddy Kane Half Steppin' Tee is equipped with the following features:
• rib crew neck with interior tape
• Half Steppin' artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

The Doors

Rots Sunset T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Doors Rots Sunset T-Shirt's features include:

• rib crew neck
• Rots Sunset artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Naughty By Nature

Logo T-Shirt

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Naughty By Nature Logo T-Shirt's features include:

• rib crew neck
• Naughty By Nature Logos printed on chest and top rear
• relaxed fit
• 100% cotton single jersey, 200 g/m²

Go to Item

AT-LP3XBT

279,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology.

Bringing the clarity and warmth of analogue audio to the digital generation, this Bluetooth® turntable offers all the benefits of vinyl with the convenience of enhanced connectivity. Enjoy the freedom to connect to the latest speakers or headphones with Bluetooth® wireless technology at just the touch of a button - your analogue listening journey starts here.

Audio-Technica’s LP3XBT turntable combines 60 years of high-fidelity design with the latest Bluetooth® technology, giving you cutting-edge features while drawing on decades of audio experience. Enjoy a turntable that’s built on heritage, but built with the modern listener in mind.

Featuring fully automatic operation, a built-in phono preamp, removeable universal headshell and replaceable stylus, this Audio-Technica turntable is easy to set up and use, making it an ideal choice for beginners or those looking to level up their listening experience. Play 33⅓ & 45 RPM records your way, experimenting with different styli as you begin to discover your personal audio preferences.

Integrated Bluetooth® technology gives you the flexibility to connect your turntable quickly and easily, no matter where you are or how you choose to enjoy your vinyl experience. Whether you pair your LP3XBT with speakers to provide the perfect soundtrack for a gathering with friends, or listen through a pair of Audio-Technica headphones for a deep listening session, you can expect impeccable high-fidelity audio.

Features:
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• High-fidelity audio with Bluetooth wireless technology
• Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
• Compatible with the high-quality Qualcomm® aptX™ audio codec
• Balanced straight tonearm with hydraulically damped lift control and rest
• AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
• Includes the AT-HS3 universal headshell
• Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire
• Anti-resonance, die-cast aluminum platter with felt mat
• Damped base construction for reduced low-frequency feedback coloration
• Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Specifications:
• Type Belt-drive, fully automatic operation
• Motor DC motor
• Drive Method Belt drive
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter < 0.2 % WRMS (33 RPM) at 3 kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Output Level LINE: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 100 to 240 V, 50/60 Hz, 0.6 A Max
• Power Consumption 2 W
• Dimensions 435.6mm (17") ×374 mm (15 ") ×128 mm (5.0") (W × D × H)
• Weight 5.0 kg (11 lbs)

Accessories Included:
• Dust cover
• Felt mat
• Platter (with drive belt)
• Dust cover hinges
• Counterweight
• Headshell (AT-HS3 BK) with VM stereo cartridge (AT-VM95C)
• 45-RPM adapter
• RCA audio cable (Approx. 1.0 m (3.3'))
• AC adapter (Approx. 1.5 m (4.9'))

Communication:
• Communication System Bluetooth version 5.2
• Frequency Band 2.402 GHz to 2.480 GHz
• Maximum RF Output 2,5 mW EIRP
• Maximum Communication Range Sichtlinie – ca. 10 m
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Compatible Bluetooth Profile A2DP
• Support Codec Qualcomm® aptX™ Adaptive Audio, Qualcomm® aptX™ Audio, SBC

Go to Item

Phono Box E

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Phono preamplifier

Phono Box E: Pure vinyl listening pleasure at an absolute bargain price!

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.

Features:
• Amplification and RIAA equalisation for MM cartridges
• Design principle inspired by Dr. Sykora
• SMD circuitry
• Special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black casing

Technical Specifications:
• Input impedance: 47 kohms
• Input capacitance: 120 pF
• Gain: 40 dB
• Output voltage(typically): 500mV/ 1kHz at 5mV/1kHz
• Noise floor: 88 dB (A weighted)
• THD: <0,05%
• RIAA deviation: deviation max. 0.5 dB/ 20 Hz - 20 kHz
• Input: 1 pair RCA socket
• Output: 1 pair RCA socket
• Outboard power supply: 18 V/500 mA DC; 220 - 240 V, 50 Hz
• Standby power consumption: < 1 watt
• Power consumption: 20 mA DC
• Dimension W x H x D (D with sockets): 120 x 32 x 100 (106) mm
• Weight: 269 g without power supply

Go to Item

The Notorious B.I.G.

Crown Bathrobe

39,99 €*

Distressed Classic Logo T-Shirt

Available Sizes: S-M, L-XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made from cozy fleece fabric, the Biggie Smalls Crown Bathrobe is a classic design equipped with a hood, a self-fabric waist belt, twin pockets at hip height, stylish piping details as well as Biggie Smalls branding resp. Crown graphic embroidered at left chest and on the rear. Relaxed fit; 100% polyester coral fleece, 280 g/m².

Dimensions:
Small-Medium: Length 117cm, Chest 127cm, Sleeve 58cm
Medium-Large: Length 120cm, Chest 130cm, Sleeve 60cm
Large-X Large: Length 123cm, Chest 133cm, Sleeve: 62cm

Go to Item

EPMD

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The EPMD Distressed Classic Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• EPMD Distressed Logo printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

The Doors

Daybreak T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Doors Daybreak Tee is equipped with the following features:
• rib crew neck with interior tape
• Daybreak artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Motörhead

England T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Motörhead England T-Shirt's features include:
• rib crew neck
• Motörhead England artwork printed on front
• "Everything Louder Than..." Gothic lettering plus spade symbol printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

MaiA S3

569,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Chateau Vinyl 7 Inch Cotton (60)

airbag craftworks

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

long awaited new chateau vinyl size for the small & precious ones!
chateau vinyl 7 inch offers a perfectly protected,
shock absorbing and cushioned space for up to 60 x 7inches.
two equal subdivisions that can be divided to both sides.
this unique feature makes record selecting more comfortable
in different booth situations. please check the detailed manual.

_2-way heavy duty zipper, made in germany
_adjustable 50mm shoulderstrap
_shoulderstrap can be turned to short handle.
_comfortable, cushioned shoulder pad
_easy to clean, cushioned, removable record cases
_4 flat inner side pockets to arrange pucks or cleaning brush.
_a fully packed chateau vinyl 7 inch only weighs around 5kg.

material: water-repellent cotton
colour: black

made in germany

24 x 22 x 18 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

ATH-PRO5X

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-PRO5X DJ Headphones - Over-ear style delivers exceptional isolation and long-wearing comfort, Maximum input power of 1,500mW enables operation at higher volume levels and Newly developed 40mm drivers reproduce extended frequency response.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 35,000 Hz
• Maximum Input Power: 1,500 mW
• Sensitivity: 100 dB/mW
• Impedance: 34 ohms
• Weight: 250 g (without cable and connector)
• Cable: -Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable
• Cable: -Detachable 1.2 m (3.9') straight cable
• Accessories Included: 6.3 mm (1/4") screw-on adapter

Go to Item

Gorillaz

Humanz T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Gorillaz Humanz Tee is equipped with the following features:
• rib crew neck with interior tape
• Humanz artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Led Zeppelin

Photo III T-Shirt

The Torch (Back Print) T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Led Zeppelin Photo III Tee is equipped with the following features:
• rib crew neck with interior tape
• Photo III artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Tool

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Tool The Torch Tee is equipped with the following features:
• rib crew neck with interior tape
• The Torch graphics printed on chest and back; additional branding printed on right sleeve
• regular fit
• 100% cotton single jersey

Go to Item

DMX

R.I.P. T-Shirt

Machete (Back Print) T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The DMX R.I.P. Tee is equipped with the following features:
• rib crew neck with interior tape
• R.I.P. artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Misfits

4 Faces (Back Print) T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Misfits Machete Tee is equipped with the following features:
• rib crew neck with interior tape
• Misfits Skull Machete graphic printed on left chest
• Misfits Skull artwork printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Metallica

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Metallica 4 Faces Tee is equipped with the following features:
• rib crew neck with interior tape
• 4 Faces artwork printed on front
• tour dates graphic printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Nirvana

Yellow Logo Babygrow

15,99 €*

Available Sizes: 12 MTH, 18 MTH, 0-3 MTH, 6-9 MTH, 24 MTH

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Nirvana Yellow Logo Babygrow is a romper suit made from single jersey, equipped with ringer crew neck and ringer bordering, Nirvana Yellow Logo artwork printed on front as well as triple snap button closure at the crotch. 100% cotton.

Go to Item

The Clash

London Calling T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Clash London Calling Tee is equipped with the following features:
• rib crew neck with interior tape
• London Calling artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Tool

BW Spectre T-Shirt

21,99 €*

Ruthless Records Logo T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Tool BW Spectre Tee is equipped with the following features:
• rib crew neck with interior tape
• Tool branding printed on chest and right sleeve
• Spectre artwork printed on the rear
• relaxed fit
• 100% cotton single jersey

Go to Item

Ruthless Records

Boys Don't Cry Black & White T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ruthless Records Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Ruthless Records Logo artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

The Cure

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Cure Boys Don't Cry Tee is equipped with the following features:
• rib crew neck with interior tape
• Boys Don't Cry artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Amy Winehouse

Rebel T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Amy Winehouse Rebel T-Shirt's features include:
• rib crew neck with interior tape
• Rebel artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

AT-MG10 Headshell

49,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

Beastie Boys

Logo Kids T-Shirt

14,99 €*

Available Sizes: 5-6 YRS

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys Logo Kids Tee is equipped with the following features:
• rib crew neck with interior tape
• Beastie Boys Logo printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Deep Purple

Smoke Circle T-Shirt

Smoke On The Water T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Deep Purple Smoke Circle Tee is equipped with the following features:
• rib crew neck with interior tape
• Smoke Circle artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Deep Purple

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Deep Purple Smoke On The Water Tee is equipped with the following features:
• rib crew neck with interior tape
• Smoke On The Water artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Deep Purple

Vintage Logo T-Shirt

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Deep Purple Vintage Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Deep Purple Vintage Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Eazy-E

Compton T-Shirt

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Eazy-E Compton Tee is equipped with the following features:
• rib crew neck with interior tape
• Eazy-E Compton artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Tina Turner

Red Logo T-Shirt

Summer Run 2023 London T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Tina Turner Red Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Tina Turner Red Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Travis Scott

Available Sizes: 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Travis Scott Summer Run 2023 London Tee is equipped with the following features:
• rib crew neck with interior tape
• Summer Run 2023 London artwork printed on front and back
• regular fit
• 100% cotton single jersey

Go to Item

Typ 6S Rundriemen

26,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Underground Resistance

UR003 T-Shirt

Available Sizes: XS, S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

The Underground Resistance UR003 T-Shirt's features include:
• rib crew neck
• UR003 artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Public Enemy

Logo T-Shirt

Vinyl Sounds Better T-Shirt

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Public Enemy Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Public Enemy Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Acrylick

31,99 €*

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Vinyl Sounds Better Tee is equipped with the following features:
• rib crew neck with interior tape
• Acrylick Vinyl Sounds Better artwork printed on chest and the rear
• relaxed fit
• 100% cotton single jersey

Go to Item

Retrogott

Tag T-Shirt

22,99 €*

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Retrogott Tag Tee is equipped with the following features:
• rib crew neck with interior tape
• Retrogott Tag artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Rokko Weissensee

Der Strengste T-Shirt

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Rokko Weissensee Der Strengste Tee is equipped with the following features:
• rib crew neck with interior tape
• Der Strengste artwork printed on front
• regular fit
• 100% polyester single jersey

Go to Item

The Notorious B.I.G.

Final Chapter T-Shirt

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Notorious B.I.G. Final Chapter Tee is equipped with the following features:
• rib crew neck with interior tape
• Final Chapter artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Ortofon

Record Stabilizer Heavy

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Record Stabilizer Heavy - Black - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Go to Item

Ortofon

OM 5S

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

Phono RCA-C (185cm)

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

NESSIE

Vinylcleaner ProPlus+

1.599,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Creator Denon DJ SC Live 4 Hardcase

149,99 €*

Vinyl Set Holder Smart 12"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 4? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Denon DJ SC LIVE 4, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Denon DJ SC LIVE 4

Specifications:
• Weight: 3,50 kg / 7.7 lbs
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.1 cm | 30.4 x 18.4 x 5.2 inch
• Inner Dimensions (W x H x D): 72.8 x 41.3 x 12.1 cm | 28.6 x 16.3 x 4.7 inch
• Material: Durashock molded EVA foam

Go to Item

Glorious

13,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl Set Holder Smart for up to 25 12 inch records is equipped with a purist design and an especially lightweight construction – ideal for installation on the wall in the living room, home studio or record store.

Glorious Vinyl Set Holder Smart 12" - Technical Data:

• Dimensions: 36.4 x 24 x 10.4 cm (L x H x W)
• Weight: 160 g

Glorious Vinyl Set Holder Smart 12" - Features:

• Holds up to 25 vinyls in the 12''-format
• Especially light and stable construction made of metal
• Easy assembly on the wall, incl. fixing accessories
• Supplied without decoration (12'' records)

Go to Item

Technics

Pinky Slipmat

14,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cartridge King XS

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Magma

CTRL Case MPC X

99,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The CTRL Case MPC X is custom designed to a hold the Akai MPC X workstation and is a very lightweight and convenient solution to carry your gear well protected to your next studio session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:

• Akai MPC X
• Akai MPC 5000
• Akai MPC Renaissance

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam padding to protect knobs, faders and pads
• Comfortable, rivet reinforced carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 54,5 x 47 x 12,5 cm
• Inner measures: 51 x 42 x 10 cm
• Weight: 2 kg
• Color: black (Item-No.: 48014 / EAN-Code: 4041212480149)

Go to Item

Connect it Phono RCA-C (123cm)

84,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

Go to Item

Digital Underground

Doowutchyalike T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Digital Underground Doowutchyalike Tee is equipped with the following features:
• rib crew neck with interior tape
• Doowutchyalike artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Technics

OnOff Slipmat

14,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technics

Headphone Logo Slipmat

14,90 €*

Christone Kingfish Ingram

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

black slipmat with white headphone logo

Go to Item

Live In London

2LP | 2023 | EU | Original (Alligator)

37,99 €*

Release: 2023 / EU – Original

Genre: Organic Grooves

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Donuts Smile Cover T-Shirt

J Dilla

31,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Remember J Dilla's Donuts? Besides being one of the most influential instrumental journey of the 21st Century, the amazing album cover added an extra twist and perfectly rounded out the whole project. Here you are!

The J Dilla aka Jay Dee Donuts Tee's features include:

• rib crew neck
• Donuts overspray stencil-like artwork discharge-printed on front
• regular fit
• 90% cotton, 10% polyester ringspun single jersey, pre-shrunk, 4.9 oz

Go to Item

ATH-TWX9

279,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wireless Earbuds

The ATH-TWX9 truly wireless earbuds offer the freedom to customize your sound space for an advanced audio experience. These headphones create an immersive audio experience and feature digital hybrid noise canceling technology. With unique features including deep-UV sterilization, 360 Reality Audio for a realistic 3D sound stage, and Snapdragon Sound™ platform for higher quality music, video, and calls, the ATH-TWX9 set themselves above the rest as the best truly wireless headphones.

Designed to connect people through sound, these hybrid headphones are equipped with advanced features making the ATH-TWX9 optimal workout headphones or commuter headphones. The splashproof headphone design (IPX4®-equivalent) makes these perfect for rain, water, and sweat. Choose from five preset noise-cancelling modes or optimize noise cancellation for your current environment simply by pressing the touch sensor on the left earbud. These non-slip, compact and ergonomic headphones are designed to ensure a secure, comfortable fit. Customize your experience with twelve different fitting eartip designs (4 diameter sizes, 3 stem lengths) for the most comfortable noise cancelling headphones.

With approximately 6 hours of continuous playback with up to 18.5 hours of extended use, these in-ear Bluetooth headphones are newly designed with 5.8 mm high-resolution drivers to deliver an extended high-frequency range and improved sound detail. Experience crystal clear call quality thanks to the Qualcomm® cVc™ Generation 8.0 technology. Minimize sound delay while playing games or watching videos with Low Latency mode. Compatible with Google Fast Pair , Sony’s 360 Reality Audio, multipoint pairing, and the A-T connect app, these headphones provide a customizable and seamless experience across devices.

Included Accessories: 30 cm (1.0’) USB-A/USB-C charging cable

Your Sound Space - A Premium Listening Experience
Combining innovative acoustic technology with a snug, comfortable fit and convenient controls, the ATH-TWX9 lets you create an intimate sound space that’s all your own.

Ambience Control - Customize Your Noise Cancellation
With five preset noise-cancelling modes to choose from, plus options for adapting noise cancellation to your current environment or for hearing the people around you, the ATH-TWX9 puts you in control of ambient noise.

Advanced Audio - Designed for Premium Sound
Newly designed 5.8 mm high-resolution drivers deliver an extended high-frequency range and improved sound detail – perfect for use with the advanced Qualcomm® Snapdragon Sound™, Qualcomm® aptX™ Adaptive audio, and Sony 360 Reality Audio technologies.

Features:
• Truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling and hear-through) can be employed for music playback and calls
• Use the touch sensor to choose from five preset noise-cancelling modes or optimized noise cancelling that adapts to your current environment
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Newly designed 5.8 mm high-resolution drivers deliver an extended high-frequency range and improved sound detail
• Compatible with Qualcomm® Snapdragon Sound™, Qualcomm® aptX™ Adaptive audio, and Sony’s 360 Reality Audio to deliver an advanced listening experience
• Eartips feature a hybrid structure of hard and soft silicone for best fit and sound performance, and come in three different lengths for each size (XS/S/M/L)
• Dual high-performance MEMS (micro-electromechanical system) mics, beamforming technology, and Qualcomm® cVc™ Generation 8.0 technology ensure crystal-clear call quality
• Sidetone circuitry improves conversations by letting you hear your voice in the headphones when making calls on most smartphones
• Qualcomm® TrueWireless Mirroring enables independent transmission to the left and right earbuds, reducing sound interruptions and delays for videos
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• Approximately 6 hours of continuous playback with up to 18.5 hours of extended use
• Charging case’s deep-UV LED sterilization system (with unique mirror processing) eliminates bacteria and viruses from the surface of the headphones**
• A-T Connect app gives you additional control: activate low latency mode, personalize noise-cancelling system, adjust and save EQ to the headphones, change L/R volume balance, select desired voice assistant (such as Amazon Alexa Built-in or Google Assistant), change codecs, and more
• Rain and water splashproof design (IPX4*-equivalent)
• Flexible dual- or single-ear usability
• Includes 30 cm (1.0') USB-A/USB-C charging cable

* IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.
** The system is more than 99% effective against E. coli and bacteriophage viruses, and more than 90% effective against Staphylococcus aureus, but it is not effective against all bacteria and viruses. The effectiveness against the novel coronavirus has not been verified.

Specifications Headphones:
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 10 to 40,000 Hz
• Sensitivity 102 dB/mW
• Impedance 16 ohms
• Weight Headphone: Approx. 5.4 g (0.19 oz) (L side), approx. 5.4 g (0.19 oz) (R side); Charging case: Approx. 55.9 g (2.0 oz)
• Charging Time Headphones: Approx. 2.5 hours *3
• Charging case: Approx. 3.5 hours (USB charging) *3; Approx. 5.0 hours (wireless charging) *3
• Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
• Operating Time Continuous transmission time (music playback): Max. approx. 6.0 hours *3 (headphones), Max. approx. 18.5 hours *3 (if charging case is used in combination)
• Microphone Type MEMS type
• Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response 100 to 16,000 Hz
• Microphone Polar Pattern Omnidirectional
• Power Supply Headphones: DC 3.85 V lithium ion battery
• Charging case: DC 3.85 V lithium polymer battery
• Water-Resistant (drip-proof) Performance IPX4*4
• Accessories Included • USB charging cable (30 cm (12"), USB Type-A / USB Type-C) • Eartips: Short (XS, S, M, L), Standard (XS, S, M, L), Long (XS, S, M, L)

Notes
*1 When using Qualcomm® Snapdragon Sound.
*2 When using Qualcomm® Snapdragon Sound and Qualcomm® aptX™ Adaptive audio.
*3 The figures above depend on operating conditions.
*4 Headphones only.

Specifications Bluetooth®:
• Bluetooth® Version Bluetooth version 5.2
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP
• Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
• Supported Content Protection Method SCMS-T
• Supported Sample Rates 44.1 kHz, 48 kHz, 96 kHz *1
• Supported Bit Rates 16 bit, 24 bit *2
• Transmission Band 10 Hz to 47,000 Hz; (when Qualcomm® Snapdragon Sound 96kHz sampling) 20 Hz to 20,000 Hz

Go to Item

Wu-Tang Clan

Shaolin's Finest Hoodie

59,99 €*

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan Shaolin's Finest Hoodie´s features include:
• drawstring-adjustable two-layer hood
• Shaolin's Finest artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• Wu Wear woven label at left sleeve
• relaxed fit
• 65% cotton, 35% polyester brush-back fleece

Go to Item

AIAIAI

TMA-2 MOVE XE Wireless

179,95 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RS MK2 Plate X One (Reloop Spin)

SolidCutz

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Suicidal Tendencies

OG Flip Hat

29,99 €*

Madvillain (MF DOOM & Madlib)

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Fold up the visor and sport an ST bandana to become a member of the infamous Suicidal Tendencies gang!

Suicidal Tendencies OG Flip Hat- features:

• high rise construction
• Suicidal Tendencies lettering printed on foamed front panel
• side and rear mesh panels
• tonal visor with signature Suicidal lettering on bottom
• snapback plastic closure
• interior includes plain taping and a moisture-absorbing sweatband
• 100% polyester

Go to Item

All Caps! Sweater

75,99 €*

Tablecloth 12" Slipmats Mix-Edition

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Madvillain (MF Doom & Madlib) All Caps! Sweater is equipped with the following features:
• rib crew neck with interior tape
• All Caps! cartoon artwork taken from the video directed by James Reitano printed on front
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Chest width in inches: S=20.5, M=22, L=23.5, XL=25, 2XL=26.5. Body length in inches: S=26.5, M=28, L=29.5, XL=31, 2XL=32.5.

Go to Item

Dr. Suzuki

29,99 €*

Record Box - Vinyl Record Storage

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!

Go to Item

Schallplattenturm (2x110 & 1x100)

89,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

Go to Item

Turn 3 MK2 (Ortofon 2M Red)

499,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Premium HiFi-turntable with digital USB-Audio Interface.

• Authentic HiFi turntable with digital USB-Audio Interface
• Pre-installed Ortofon 2M Red cartridge
• Low-vibration DC motor

Over 25 years experience
With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.

Quiet DC drive
The heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.

Electronic speed control for 33, 45 & 78 rpm
The TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.

Revised tonearm construction
The redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience.

Anti-skating wheel
The anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.

Headshell connection
The headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.

USB recording function
The integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.

Semi-automatic stop
With the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.

Shock-absorbing feet
Decoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal.

Precision-manufactured die-cast aluminium turntable
The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.

Solid base with piano finish
The sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image.

Immediate listening pleasure with hi-tech Ortofon cartridge
The TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.

Gold-plated connections
The gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.

High-end pre-amplifier
Equipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.

A class of it's own
The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

SPECIFICATIONS
FEATURES:
• Authentic HiFi turntable with precision belt drive
• Supplied with pre-assembled Ortofon 2M Red cartridge
• Optimised tonearm design for optimal tracking accuracy with flexible SME mounting
• Integrated high-quality preamplifier, can be switched on/off (phono/line output)
• USB recording function: recording and digitalisation of vinyl via simple USB connection for PC/Mac
• Semi-automatic stop function (can be activated optionally)
• Manual tonearm lift for analogue playback pleasure
• Low-vibration DC motor
• Integrated motor control with large speed selector switch (33/45/78 RPM)
• External DC power supply for trouble-free operation (100-230 V / 12 V / 500 mA)
• Precision-machined die-cast aluminium platter for resonance optimisation
• Infinitely adjustable anti-skating system with rotary wheel for optimum tracking accuracy
• Gold-plated, anti-corrosion connectors (all cables removable)
• Special turntable feet for effective decoupling
• High-gloss piano-finish cabinet
• On/Off switch on the back of the unit
• Incl. Ortofon 2M Red cartridge pre-mounted on headshell, counterweight, dust cover incl. hinges, felt mat, aluminium turntable, 7" aluminium adapter, RCA & USB cable and international power supply (UK/EU/US)

TECHNICAL DATA
TURN 3 MK2:
• Type of turntable: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45 & 78
• Wow and Flutter: 0.2% WRMS
• Analogue Output: Phono / Line, switchable
• Connections: RCA Audio output (gold-plated), USB type B
• Phono Output Level: 4.0 mV (with Ortofon 2M Red)
• Line Output Level: 224 mV (with Ortofon 2M Red)
• Tone Arm type: Straight
• Effective Arm Length: 223.6 mm
• Effective tonearm mass: 21.4 g
• Overhang: 18.6 mm
• Tracking force Range: 18 mN
• Platter diameter: 300 mm
• Anti-Skating adjustment: Yes
• Type of cartridge: MM (Ortofon 2M Red)
• Power consumption: 6W
• S/N: >60 dB or higher
• USB Audio Output with 48 kHz / 16-Bit
• USB Funktion: USB rec. function
• Supported Operating System: Windows & Mac
• Dimensions: 450 x 352 x 138.7 mm (incl. Dust cover)
• Weight: 6.5 kg

ORTOFON 2M RED:
• Output voltage at 1000 Hz, 5cm/sec.: 5,5 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 μMm
• Compliance, dynamic, lateral: 20 μMm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 μMm
• Tracking force range: 1,6-2,0g (16-20 mN)
• Tracking force, recommended: 1,8 g (18 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1,3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g

Manual: https://www.reloop-hifi.com/media/productattach/t/u/turn3mk2_im.pdf

Go to Item

60 Record Case

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Reloop Case, capable of holding approximately 60 records, is the perfect solution for small gigs. Two locks secure the bag against unauthorised access, the protective padding avoids unwanted damage to the vinyl.

FEATURES
• Classic record case
• Extremely robust construction made of aluminum-coated wood
• Removable top
• 2 lockable snap fits
• Foam padding
• Comfortable handle
• Rotund angles

TECHNICAL DATA
• Dimensions: 360 x 220 x 395 mm
• Weight: 2.6 kg
• Holds approximately 60 records

Go to Item

OM Black

34,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OM cartridge for headshell mounting comes with superb sound characteristics and a very sturdy construction that also lends itself to scratching.

FEATURES
•Headshell mounting
•Spherical stylus
•Low vinyl wearout
•Excellent sound characteristics
•Appropriate for scratching
•Sturdy construction

TECHNICAL DATA
•Frequency range: 20 Hz - 22 kHz
•Output voltage (5 cm/s): 4 mV
•Tracking force range: 1,75 - 2,25 g
•Recommended tracking force: 2 g
•Weight: 5 g

Go to Item

Headshell (Technics Bauform)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

minirig

Rucksack

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

550 grams weight
30 Litres capacity
60 inch laptop sleeve
4 x Minirig speakers capacity
1 x Minirig Subwoofer capacity
1x Skateboard strap

Go to Item

Keith Haring

DJ Dog Hoodie

53,99 €*

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Keith Haring DJ Dog Hoodie´s features include:
• drawstring-adjustable two-layer hood with interior tape and metal eyelets
• Keith Haring's DJ Dog artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 50% cotton, 50% polyester brush-back fleece, 280 g/m²

Go to Item

Word Up Records

Logo T-Shirt

17,54 €* 26,99 € -35%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Word Up Records Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Word Up Records Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Alkaline Trio

Skele Candle T-Shirt

22,99 €*

Love Will Tear Us Apart T-Shirt

Available Sizes: S, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Alkaline Trio Skele Candle Tee is equipped with the following features:
• rib crew neck with interior tape
• Skele Candle artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Joy Division

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Joy Division Love Will Tear Us Apart Tee is equipped with the following features:
• rib crew neck with interior tape
• Love Will Tear Us Apart artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Ultimate Flight Case Ableton Push 3 Plus (L)

209,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Ableton Push 3 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Ableton Push 3 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Adjustable laptop shelf
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners

Fits:
• Ableton Push 3

Specifications:
• Weight: 12,50 kg / 27.5 lbs
• Outer Dimensions (W x H x D): 45.6 x 43.2 x 18.3 cm | 17.9 x 17.0 x 7.2 inch
• Inner Dimensions (W x H x D): 38.2 x 31.9 x 6.8 cm | 15.0 x 12.5 x 2.7 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Vinyl Storage

LP-Box (6)

11,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-01

Creator Cartridge Hardcase

29,00 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your turntable cartridges? Then look no further, UDG developed a super light EVA hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches and liquids. This case is perfect for the traveling DJ that needs to protect their cartridges.

UDG Cartridge Hardcase - specifications:

• Durashock molded EVA foam
• fits DJs cartridges (Shure, Ortofon, Stanton, etc.)
• easy grip zipper puller
• dimensions: approx. 24.5 x 13.5 x 5.5 cm (9.6 x 5.3 x 2.2 inch)
• weight: approx. 0.26 kg (0.6 lbs)

Go to Item

Clutch

Classic Logo Hoodie

21,99 €* 39,99 € -45%

Available Sizes: M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Clutch Classic Logo Hoodie´s features include:
• drawstring-adjustable two-layer hood with metal eyelets
• Clutch logo printed on chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Ultimate SlingBag MK2

129,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Sling Bag is a functional bag with a minimalist design. It's water-resistant, padded for maximum protection of your beloved vinyl goodies, and stores about 45 12" records as well as 24 CD copies in two folders.

UDG Sling Bag - features:

• 2 CD folders for 24 CD copies, each stored in the front compartment
• front and side pockets for accessories
• rugged top handle
• padded and PVC-backed walls
• adjustable and padded shoulder strap
• UDG security lock
• rubber details at bottom to protect the fabric
• dimensions: approx. 32 x 40 x 25 cm
• shell: 100% nylon
• lining: 100% polyester

Go to Item

Creator Headphone Hardcase Large

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Creator Headphone Case is a large carrying bag for DJ headphones such as the Sennheiser HD 25-1.

Go to Item

Creator Pioneer DDJ-REV5 Hardcase

109,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-REV5 controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer DDJ-REV5 controller, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer DDJ-REV5 Controller + power adapter, extra cables

Specifications:
• Weight: 2,26 kg / 4.972 lbs
• Outer Dimensions (W x H x D): 77.2 x 46.7 x 13.0 cm | 30.4 x 18.4 x 5.1 inch
• Inner Dimensions (W x H x D): 76.2 x 44.1 x 11.0 cm | 30.0 x 17.4 x 4.3 inch
• Material: Durashock molded EVA foam

Go to Item

Goldring

D06 Stylus

179,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Goldring G1006 Cartridge

Just needle, not the complete cartridge included!

Go to Item

Ultimate Pick Foam Flight Case Multi Format XL

159,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: NI Kontrol S3, S4 MK3, S8, Pioneer DDJ-800/ RX/ SX3/ SR2, XDJ-RR, Reloop Mixon 4, Numark NS6II, NVII
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Removable front access panel
• Fully lined interior egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 69,2 x 46,7 x 18,1 cm
Inner: 68,2 x 45,7 x 17,1

Weight: 6,3 kg | 13,8 lbs

Go to Item

Ultimate Flight Case Pioneer DDJ-1000

299,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Flightcases not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flightcases provides premium professional quality in a very stylish modern black/silver colored combination.

FEATURES
• Fits: 1x Pioneer DDJ-1000
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Removable front access panel
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

Go to Item

Creator Controller Hardcase 2XL MK2

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 4,60 kg / 10.12 lbs
• EAN: 8717228279959
• Outer Dimensions (W x H x D): 92.2 x 49.2 x 16.0 cm | 36.3 x 19.4 x 6.3 inch
• Inner Dimensions (W x H x D): 91.0 x 48.0 x 8.5 cm | 35.9 x 18.9 x 3.3 inch
• Material: Durashock molded EVA foam

Protection:
• Water repellent laminated nylon exterior
• Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• Pioneer DDJ-REV7, XDJ-RX3, DDJ-RZ, DDJ-SZ2, DDJ-SZ

Go to Item

Ultimate Flight Case Portable Z-Style DJ Table Plus (Wheels)

519,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG Ultimate Flight Case Portable Z-Style DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down. A quality piece of furniture for venues, clubs and rental companies, built with industrial-strength materials. Constructed from sturdy 9mm thick plywood, the outer sides are laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern. It features edge roller wheels for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading.

• Weight: 36,50 kg / 80.3 lbs
• EAN: 8718969213998
• Outer Dimensions (W x H x D): Folded: 119.5 x 61.0 x 23.7 cm | 47.0 x 24.0 x 9.3 inch
• Outer Dimensions (W x H x D): Opened: 119.5 x 91.3 x 71.1 cm | 47.0 x 36.0 x 28.0 inch
• Material: Heavy duty construction of 9 mm thick plywood

Protection:
• Powder coated anodized hardware
• Heavy duty construction of 9 mm vinyl laminated plywood
• Laminated in a black finish with honeycomb/hexagonal "Stage Grip" pattern
• Solid aluminum profiles
• Dual anchor rivets with included washer

Extra's:
• UDG heavy-duty spring-loaded handles
• Roller wheels with high quality in-line skate bearings for convenient transport
• Utility shelf for storage
• High grade aluminum UDG logo plate
• Secure stacking due to stackable ball corners

Fits:
• Holds a Maximum Weight of 45 kg/ 100 lbs. Evenly Distributed

Go to Item

Creator Wolfmix W1 Hardcase

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A creative performer looking for a professional, durable case solution for the Wolfmix W1? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Wolfmix W1, this case is perfect for the travelling creative performers that needs to protect their equipment.

FEATURES:
• Fits Wolfmix W1
• Cover main material 600D polyester with 5 mm EVA durashock
molded body
• Mesh compartment for power adapter, extra cables
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

• OUTER DIMENSION WIDTH HEIGHT DEPTH: 22.9 25.4 11.7 CM / 9.0 10.0 4.6 INCH
• INNER DIMENSION WIDTH HEIGHT DEPTH: 19.9 22.4 6.2CM / 7.8 8.8 2.4 INCH
• WEIGHT: 0.5 kg 1.1 lbs

Go to Item

Creator Pioneer RMX1000 Hardcase MK2

44,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your Pioneer RMX1000 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer RMX-1000 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,45 kg / 0.99 lbs
• EAN: 8717228278310
• Outer Dimensions (W x H x D): cm: 37 x 19 x 7 | inch: 14.5 x 7.5 x 2.8
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper puller
• Convenient carry handles

Fits:
• Pioneer RMX-1000 Controller

Go to Item

Creator Rane One Hardcase

109,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ/Producer looking for a professional, durable case solution for your Rane One? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Rane One, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Rane One
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
72,00cm

HEIGHT
43,00cm

DEPTH
14,00cm

INNER DIMENSIONS

WIDTH
68,80cm

HEIGHT
34,70cm

DEPTH
6,80cm

WEIGHT
2,27kg

Go to Item

Creator Controller Hardcase M MK2

64,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

Go to Item

Ultimate Audio Cable USB 2.0 A-B Straight 3m

17,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Go to Item

Ultimate Audio Cable USB 2.0 A-B Straight 2m

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Suicidal Tendencies

Flipskull Windbreaker

63,99 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies Flipskull Windbreaker's features include:
• turn-down collar
• snap button front closure
• raglan sleeves
• 2 slit pockets at lower front
• drawstring-adjustable bottom hem
• stretch cuffs
• Suicidal Tendencies branding printed at left chest
• ST Flipskull artwork printed on back
• relaxed fit
• shell: 100% polyester
• lining: 100% Polyester mesh

Go to Item

Creator Controller Hardcase Extra Large MK2

109,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

Specifications:
• Weight: 2.35 kg / 5.18 lb
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ SC LIVE 2, MC7000
• Reloop Mixon 8 Pro, Mixon 4,
• Hercules DJControl Inpulse T7

Go to Item

Ultimate Audio Cable USB 3.2 C-C Orange Straight 1,5m