HHV Records 678 Items

The Smoked Out t-shirt was done for the Madlib Medicine Show series and features the Madlib smoke cloud from the LP cover for Madlib Medicine Show #11: Low Budget High Fi Music. Artwork by Gustavo Eandi.

The Madlib Smoked Out Tee's features include:

• rib crew neck
• Smoked Out artwork printed on front
• relaxed fit
• 100% cotton

Freddie Gibbs and Madlib took these on a short tour they did for the Piñata record. Design by Mason London.

The Freddie Gibbs & Madlib Pinata T-Shirt's features include:

• rib crew neck with interior tape
• Mason London's Pinata artwork printed on front
• regular fit
• 100% cotton single jersey

Quasimoto vs P.E. Designer Jeff Jank’s take on the Public Enemy logo featuring Lord Quas in the crosshairs.

The Quasimoto QE Tee is equipped with the following features:

• rib crew neck with interior tape
• QE artwork printed on front
• relaxed fit
• 100% cotton single jersey, 6 oz

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

The Sonic Youth Dirty T-Shirt's features include:
• rib crew neck
• Dirty artwork printed on front
• regular fit
• 100% cotton single jersey

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

ATN-XP5
REPLACEMENT STYLUS FOR AT-XP5 CARTRIDGE
Elliptical bonded stylus
Carbon ABS cantilever
Durable design for DJ application

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

ATN95EX
REPLACEMENT STYLUS FOR AT95EX
Elliptical diamond stylus with Bonded Round Shank
Replacement stylus for AT95EX
Available in red

ATN91R
REPLACEMENT STYLUS FOR AT91R CARTRIDGE
Aluminium alloy tube cantilever for the pick-up of subtle details
Replacement stylus for AT91R
Bonded conical stylus

Catalogue: https://eu.audio-technica.com/resources/catalogues/Phono_Cartridges_17.pdf

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

Replacement case for our Disco Antistat record cleaning machine Generation II, with two brushes, without drying stand.

Made in Germany!

The Suicidal Tendencies Charlie T-Shirt's features include:

• rib crew neck with interior tape
• Charles Manson artwork printed on front
• ST branding plus additional writing printed on the rear
• relaxed fit
• 100% cotton single jersey

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

supplied in Flight case

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DIGITAL

Attention: Matches the new Concorde MkII only!

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

supplied in Flight case

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

With measures of approx. 9 x 11.5 cm, the Suicidal Tendencies Lance Skater Patch is the perfect edition for any denim west or motocycle jacket. It's made from rugged textile fabric and equipped with a print of the OG Suicidal Tendencies Lance Skater 1983 artwork.

The RIOT DJ-Stashpack XL Plus is a versatile and lightweight gig bag that and was designed to be flexible in order to accommodate a variety of equipment. It features a practical, height-adjustable Rolltop opening to easily stash a battle-mixer, records, production gear or a DJ-controller. With its durable material, solid processing and a unique design, the new RIOT DJ-Stashpack XL Plus is perhaps the most versatile gear bag in the market.

FITS
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DJS-1000
Numark NS6II
Numark NV2
Numark Mixtrack Pro 3
NI Kontrol S5
NI Kontrol S4
NI Kontrol S2
Reloop Terminal Mix 4
Roland DJ-202
Pioneer DDJ-SB2
Pioneer DDJ-RB
Numark Mixtrack Pro 2
Denon MC-4000
Vestax VCI-400
Vestax VCI-380
Akai MPK-25
Akai MPC Renaissance
Rane Seventy-Two
Rane Sixty-Two
Rane Sixty-Eigth
Pioneer DJM-S9
Pioneer DJM-900 SRT/NXT
NI Kontrol Z2
Laptop up to 17’
12“ Vinyl
Accessories

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
Soft-fleece lining
PVC-coated (waterproof zippers)
Lockable zippers on main and laptop compartment
Flexible height adjustment through variable Rolltop Closure
Main compartment includes removable bottom foam and padded side walls
The included (removable) Protection Panel protects jog wheels and faders and the folding top part works like an additional lid when e.g. battle-mixers are stowed.
Separate side entry compartment provides quick access to your laptop (up to 17’’)
Large front pocket with internal zip-pouches and organizers
1 side quick-access side pocket for small accessories and personal belongings
1 side bottle holder
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand-luggage compatible (up to 56 cm height)
Zippered side access laptop compartment with waterproof zippers (up to 17’’

Outer dimensions: (H/B/T): 49-65 x 38 x 26 cm
+ Inner dimensions: : 47-56 x 32 x 20 cm
+ Weight: 2,4 kg

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The RIOT DJ-BACKPACK is the latest and most compact model of the RIOT line. It was especially designed for digital-DJs travelling with a basic DVS setup such as 15” laptop, Timecode records and accessories or small controllers.
The clever interior layout of the main compartment includes two padded, removable dividers which allowing for three separate protective compartments and the featured “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.

FITS
13-15‘‘ Laptop
NI Maschine
NI Kontrol X1
NI Kontrol F1
NI Kontrol D2
Ableton Push 2
12“ Vinyl
Accessories

BASICS
Crafted from durable and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Soft-fleece lining
Lockable zippers on main and laptop compartment
Rubber corner protectors and rubber feet
Main compartment includes two padded, removable dividers
The “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.
Separate side entry compartment provides quick access to your 15,4’’ laptop
Two internal hanging mesh accessory pockets comfortably fill out the upper area of the backpack
Large front pocket with internal pouches and organizers
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand luggage compatible

SPECS
+ Outer dimensions: (H/B/T): 53 x 33 x 16-22 cm
+ Inner dimensions: : 40 x 31 x 12-16 cm
+ Weight: 2,2 kg

With a capacity of up to 50 records, the new RIOT LP- Bag 50 is a stylish solution to carry your 12-inch vinyl in comfort and style. Equipped with the same high quality material components the entire RIOT range uses, this bag also matches the new RIOT LP-TROLLEY 50 perfectly and can be easily affixed on to a trolley handle with its trolley sling.

FITS
50 12“ Vinyl
20 7“ Vinyl
13‘‘ MacBook
NI Maschine
NI Kontrol X1/F1/Z1 (inkl. Case)

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
1 cm padding on all sides
PVC-coated (waterproof zippers)
Riveted handles and straps
Soft-fleece lining
Lockable zippers on main compartment
Rubber corner protectors
Ergonomically shaped, adjustable shoulder strap and padded carrying handles
Including trolley-sling to attach on a MAGMA record or equipment trolley
Hand luggage compatible

SPECS
Outer dimensions: 33 x 35 x 20 cm
Inner dimensions: 31 x 32,5 x 16 cm
Weight: 3,7 kg

EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DON’T

Adjustable cartridge which will fit in a traditional headshell mount. Replaceable diamond tip.

• 5" mount+W36
• 0,6mil spherical diamond tip
• tracking force: 2,5g to 3,5g
• ch.separation: 26dB @ 1KHz
• output: 2,4 mV

Pure white paper inner sleeve for storing 7 inch records. This inner sleeve is lined with anti-static high density polyethylene. Equipped with a centered die-cut hole.
It's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Vinyl Innenhüllen (anti-static) - specific details:

• measures: 180 x 180 mm
• material: 80 g/m² pure white premium paper and polyethylene
• die-cut diameter: 80 mm centered
• anti-static
• selling unit: 100 pieces

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.?? These Performance Series pressings are packaged as a single vinyl and available in three classic colours.

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the color throughout a run. Every record is unique.

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

Deluxe paper inner sleeve for storing 7 inch records. This inner sleeve is made from 90 g/m² offset paper and equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen Deluxe - specific details:

• measures: 180 x 180 mm
• material: offset paper, 90 g/m²
• die-cut diameter: 80 mm centered
• selling unit: 50 pieces
• high-quality product, made in Germany

The Suicidal Tendencies DT ST Dogtown SxTx 1 T-Shirt's features include:

• rib crew neck
• Suicidal Tendencies logo printed on left chest
• Dogtown cross branding printed on back
• regular fit
• 100% cotton single jersey