HHV Records 184 Items

The Hamburg Spinners (Carsten Erobique Meyer, David Nesselhauf, Dennis Rux, Lucas Kochbeck) Die Hamburg Spinners Und Der Magische Kraken Tee is equipped with the following features:
• rib crew neck with interior tape
• Die Hamburg Spinners Und Der Magische Kraken artwork printed on front
• regular/relaxed fit
• 100% cotton single jersey

The Czarface Czar Noir Tee is equipped with the following features:
• rib crew neck with interior tape
• Czar Noir artwork printed on front
• regular fit
• 100% cotton single jersey, 6 oz, with super soft hand feel

The Radiohead Gawps Tee is equipped with the following features:
• rib crew neck with interior tape
• Gawps artwork printed on front
• regular fit
• 100% organic cotton single jersey

The Minor Threat Bottled Violence Tee is equipped with the following features:
• rib crew neck with interior tape
• Bottled Violence artwork printed on front
• regular fit
• 100% cotton single jersey

The Keith Haring Baby Tee is equipped with the following features:
• rib crew neck with interior tape
• Keith Haring artwork printed on front
• regular fit
• 100% cotton single jersey

The Keith Haring Radiant Baby Hoodie´s features include:
• drawstring-adjustable hood with interior tape and metal eyelets
• Radiant Baby artwork printed on chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 50% cotton, 50% polyester brush-back fleece5

The Wu-Tang Babygrow is a romper suit made from single jersey, equipped with ringer crew neck and ringer bordering, Wu-Tang artwork printed on front as well as triple snap button closure at the crotch. 100% cotton.

The UDG Ultimate Backpack Slim is a light weight, slim fit backpack for DJ’s that require a smaller version of UDG’s larger size backpacks. Constructed from high quality water resistant Nylon it contains a padded 17” laptop compartment with added neoprene iPad/tablet pocket. The zipper expandable main padded compartment can hold a Numark PT01 Scratch portable turntable or Pioneer DJM-S9 mixer and a few 7" & 12” tone control/scratch vinyl and some clothing. There are enough zipped compartments to securely store microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories. This bag comes with a built in outside USB charger connector, a quick access headphone pocket, ergonomic back padding, comfortable moisture absorbent shoulder straps and a sling so you can slide it on every UDG trolley.

Weight 1,40 kg / 3.08 lbs
Outer Dimensions (W x H x D) cm: 32 x 44 x 23 | inch: 12.6 x 17.3 x 9
Inner Dimensions (W x H x D) cm: 29.6 x 41.6 x 9.3 | inch: 11.6 x 16.4 x 3.6
Material Water Resistant Nylon 450D
Protection Padded 17” laptop compartment with added neoprene iPad/tablet pocket
Compartments to securely store microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories
Padded haul carry handles.
Extra's Zipper expandable main compartment
Outside USB charger connector
Quick access headphone pocket
Soft padded carry handle
Ergonomic back padding
Comfortable moisture absorbent shoulder straps
Trolley sling for easy transport
Fits up to 17" laptop,
Pioneer DDJ-XP2, DDJ-200, DJM-S7, DJM-S9, DJM-S3, DJM-450, DJM-250MK2, DDJ-WeGO3/4, DDJ-XP1, Toraiz Squid,
NI Maschine Jam/ MK2/ MK3, Traktor Z2,
Denon DJ Prime Go, MC2000,
Akai MPC Live/ II, MPD226,
Numark Scratch, PT01 Scratch, Omni Control, Party Mix, Stealth Control,
Reloop Elite, Beatmix, Digital Jockey III, KUT, Mixage IE,
Rane Empath, MP 2014, Sixty One, Sixty Two/Two Z, TTM 56S, TTM 57 MKII, TTM 57SL,
Novation Twitch,
Roland MC-202, TR-707, TR-8, TR-8S, Aira MX-1,
M-Audio Oxygen 25,
Mixars DUO MKII,
Gemini FirstMix Pro, Slate2, Slate4,
Hercules DJ Console 4-Mx, DJ Control Air S Series, DJ Control Wave, P32 DJ Controller, Universal DJ,
Livid CNTRL:R,
Arturia Drumbrute, Drumbrute Impact,
Vestax SPIN/ 2, TR-1, TYPHOON, VCI 100, VCI 300, VCI-100 MK2, VCI-300 MK2,
Microphone, USB sticks, SD cards, wires, cables and faders, AC power adapters and other accessories

The Okayplayer International Players Jersey is equipped with the following features:
• ribbed V neck with yarn dyed contrast stripe detail and interior tape
• curved Players appliqué with embroidered details at chest
• OkayPlayer Authentics woven label at bottom left
• curved bottom hem with side notches
• International Players patch plus OKP logo embroidery at left sleeve
• rib cuffs with yarn dyed contrast stripe details
• 36 team number appliqué on the rear
• relaxed fit
• 100% polyester mesh

The UDG courier-style Record Bag is made to hold approximately 40 vinyl records - the perfect item for DJs who care about their weight. There's an additional compartment at the front flap for documents, tickets and stuff, as well as a small zip pocket at the rear.

UDG Record Bag Courier Style - additional features/details:

• holds up to 40 records
• electroplated zippers
• detachable shoulder strap with padding
• detachable phone pocket
• 5 compartments
• dimensions (exterior): approx. 38 x 28 x 13 cm
• weight: approx. 0.55 kg
• water resistant fabric made of 100% nylon

The UDG Ultimate DIGI Trolley To Go constucted with a solid body structure trolley bag with in-line wheels and a two stage-trolley handle makes it the ideal bag for those long airport walkways. Built for the frequent flying DJ, with room for your valuable digital DJ gear, it has a large central compartment, a removable divider with an organiser section for your audio interface and headphones. A padded laptop sleeve to fit a 15" MacBook Pro is provided to protect your computer with two external pockets and a single internal mesh pocket providing storage for cables and documents. The Digi Trolley To Go is the perfect long distance travelling partner.

Weight 5,10 kg / 11.22 lbs
Outer Dimensions (W x H x D) cm: 35.5 x 52 x 28 | Inch: 14 x 20.5 x 11
Inner Dimensions (W x H x D) cm: 31 x 39 x 19 | inch: 12.2 x 15.4 x 7.5
Material Water Resistant Nylon 420D
Protection Padded main compartment
Integrated combination lock
Extra's Adjustable divider with organizer panel for audio interface & headphone
Two external accessory pockets+single internal mesh pocket
Retractable handle with 2-stage trolley system
Ergonomic detachable shoulder strap
Fits - Up to 15" laptop, headphone,
- Pioneer DDJ-XP2, DDJ-200, CDJ-800 MK2, CDJ 900, DJM-750 K/S, DJM-800, DJM 850 K/S/W, XDJ-1000, DDJ-WeGO 3/ 4,
- NI Traktor Z2,
- Numark Scratch
- Reloop Digital Jockey-2, RMP-4, RMX-60, RMX-80,
- Denon DN-S3700, DN-X1100, DN-X1600, DN-X1700,
- Akai MPD32,
- Ableton Push,
- Allen & Heath Xone 42, Xone 43C, Xone 62, Xone 92, Xone DB2, Xone DB4,
- Behringer DDM4000,
- Hercules DJ Control Wave,
- Novation Twitch,
- Rane Sixty Two/Two Z, Sixty Eight, Sixty Four,
- Roland Aira MX-1,
- Vestax VCI 100 MK2,
- or check UDG Bag Finder

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

The OutKast Blue Box Tee is equipped with the following features:
• rib crew neck with interior tape
• Blue Box artwork printed on front
• regular fit
• 100% cotton single jersey

The Beastie Boys Graff Tee is equipped with the following features:

• rib crew neck with interior tape
• Graff artwork printed on chest
• relaxed fit
• 100% cotton single jersey

Der Kutter ist das ideale Übungstool für alle Turntablists, die auch unterwegs nicht darauf verzichten wollen, an ihren Routines zu feilen. Im Gegensatz zum Frisk Fader verfügt der Kutter über zwei Audioeingänge, wobei Kanal 2 auf „through“ gestellt werden kann um die Musik im Hintergrund auch bei bewegtem Fader durchlaufen zu lassen. Der Kutter bietet eine Crossfader-Reverse-Funktion, auch bekannt als Hamsterswitch. Das kratzfeste Gehäuse verfügt über ein elegant schlankes Design und funktioniert dank der analogen Schaltung ohne Batterien. Über den Audio Ausgang wird der Kutter beispielsweise an eine Stereoanlage oder einen aktiven Lautsprecher angeschlossen. Drei Miniklinke-Kabel gehören zum Lieferumfang.

Features
⦁ Transportabler Crossfader
⦁ inkl. 3x Miniklinke-Kabel und Klettband zur fixierung
⦁ Stereofader (Cuts auf beiden Seiten)
⦁ 2 Eingänge
⦁ 1 Ausgang
⦁ Hamsterswitch (Crossfader-Reverse)
⦁ Post-/Throughfader (Kanal 2)
⦁ Schlankes Design
⦁ Top-Panel ohne störende Schrauben (auf Unterseite geschraubt)
⦁ Betrieb ohne Batterien
⦁ Designed by STOKYO Japan
⦁ Montiert in Japan
⦁ Verpackung aus wiederverwertetem Material
⦁ Farbe: rot

Lieferumgang:
Kutter, 3 Miniklinke-Kabel, Anleitung, Klettband
Abmessungen: 40 x 78 30mm
Gewicht: 40g

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Red features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, which ensures high rigidity while eliminating unwanted resonances.

2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV
Channel balance at 1 kHz - 1.5 dB
Channel separation at 1 kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 70 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1.6-2.0 g (16-20 mN)
Tracking force, recommended - 1.8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Red
2M standard and 2M Verso cartridges weight - 7.2 g
Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Blood Spencore RUS T-Shirt - features:
• rib crew neck with interior tape
• Blood Spencore RUS artwork printed on chest, left sleeve, and top rear
• relaxed fit
• 100% cotton single jersey

The Primal Scream Screamadelica Tee is equipped with the following features:
• rib crew neck with interior tape
• Screamadelica artwork printed on front
• regular fit
• 100% cotton single jersey

Made from lightweight cotton fabric, the Urban Classics Bandana is equipped with a Paisley pattern printed all over: Measures: approx. 55 x 55 cm; 100% cotton.

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

• Surface mount LED's for long life
• Illuminates outward - no reflector
• Balanced voltage - no resistors needed
• Easy installation - soldering required
• Comes as a pair - x2 LED circuit boards. (Connect with cables from SL unit.)
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

45 rpm adapter for large hole 7" records

Puzzle Heart in Cherry Red

Using the latest technology and high quality design we bring to you the new Minirig Mini 2 Bluetooth rechargeable speaker.
NOW 3dB LOUDER. NEW AND IMPROVED SOUND. With 15 watts of power this little speaker will be the soul of any party!
20% more battery life than minirig MRBT-Minir 1.

MADE WITH PASSION - DESIGNED & BUILT IN BRISTOL, UK
All minirig products go through years of passionate research and fine tuning. Then carefully hand assembled and tested in-house for the highest possible quality.

Can be used as Bluetooth Receiver.
Is linkable with other minirigs.

Comes with charging cable and 3.5mm aux cable.

•Dimensions: W = 84mm H = 53mm
•Weight: 312g
•Driver: Custom 52mm with neodymium motor system
•Frequency response(1): 65-16000Hz
•Battery life max volume: 3 hours
•Battery life average use: 12 hours
•Battery life low volume: 36 hours
•Input power: USB (5V DC @ 800mA)
•Amplifier power: 1 x 15Wrms
•Bluetooth: 4.2 with aptX, AAC and wireless stereo
•Bluetooth Reciever Mode: Yes (line out / headphones)
•Bluetooth range: >10-30 meters line-of-sight
•Charging time: 2.5-3.5 hours
•Audio input/output: 2 x 3.5mm mini jack socket
•Construction: Anodised aluminium and ABS / polycarbonate
•Weatherproofing: Splash resistant
•App: IOS and Android

Made in the UK

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

45 rpm adapter for large hole 7" records

Broken Heart in Red

Material: PLA

45 rpm adapter for large hole 7" records

Phoenix bird in Blood Orange

Material: PLA

•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

A true MAGMA classic. The LP-Bag 100 Trolley is a proven practical and convenient transportation solution to carry up to 90 12″ vinyl records. The new reinforced design has been rigorously tested to insure the highest strength and stability to carry your precious records well protected.

FITS

90 12“ Vinyl
Headphones
Needle-case
Cables

BASICS

Durable, water-repellent 480D Nylon and high quality zipper
Telescopic handle on a sturdy reinforced trolley-board system
Holds approximately 90 records
Extra-thick 2,5 cm thick padding all around the main compartment
Padded back wall to protect the telescopic handle from damage
Lockable zipper on main compartment
3 exterior pockets for headphones, needles and other accessories
Comfortable carrying handle and detachable padded shoulder strap

SPECS

Outer measures: 38 x 45 x 38 cm
Inner measures: 32 x 31 x 28 cm
Weight: 4,2 kg


Color: black/red (Item-No.: 40540/ EAN-Code: 4041212405401)

The RIOT DJ-BACKPACK XL is a high-end, extremely rugged-built backpack designed for the heavy-travelling Pro-DJ. It comfortably holds any digital gear from Kontrol S4 to battle-mixers such as Rane Sixty-Two or Pioneer DJM-S9 along with a laptop and accessories. Constructed entirely from hardwearing PVC Tarpaulin, its outer shell and all zippers are fully waterproof which ensures your gear is protected even in the worst weather. The featured “Zip-Around-Expansion-System” means the main compartment’s capacity can be doubled, turning the RIOT DJ-Backpack into the ultimate versatile packing monster.

FITS

Laptop up to 17"
Ableton Push2
Akai MPK-25
Akai MPC Renaissance
Denon MC-4000
NI Kontrol S5
NI Kontrol S4 MK2
NI Kontrol S2 MK2
NI Kontrol S2 MK3
NI Kontrol D2
NI Kontrol Z2
NI Maschine
Numark Mixtrack Pro 2
Pioneer DDJ-SB2
Pioneer DDJ-SB3
Pioneer DDJ-400
Pioneer DDJ-RB
Pioneer DJM-S9
Pioneer DJM-900 SRT/NXT
Rane Seventy-Two
Rane Sixty-Two
Rane Sixty-Eigth
Reloop Elite
Roland DJ-202
Vestax VCI-400
Vestax VCI-380
12“ Vinyl
Accessories

BASICS

Crafted from hardwearing and 100% waterproof PVC Tarpaulin
Soft-fleece lining
PVC-coated (waterproof zippers)
Lockable zippers on main and laptop compartment
Rubber corner protectors and rubber feet
Main compartment includes several removable adjustment foams, a divider and a protection panel
The “Zip-Around-Expansion-System” doubles the main compartment’s capacity
Main compartment can be packed and unloaded in the “DJ-booth-friendly” stand-up position or in the fully opened and unfolded position to gain easy access
Separate and fully padded laptop-compartment up to 17”
Two large front pockets with internal mesh pouches provide perfect organization of small accessories
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Top and side carrying handles
Detachable trolley sling
Hand luggage compatible

SPECS

+ Outer dimensions: 56 x 37 x 23 cm

+ Inner dimensions: 51 x 32 x 8 cm

+ Weight: 3,0 kg



+ Color: black/red (Item-No.: 47880 / EAN-Code: 4041212478801)

Now with 2-way Bluetooth!

Are you a true wanderer and always thinking about your next trip? The eye-catching and ear-popping Crosley Voyager will take you on this journey thanks to it's great stereo speakers and the design of the grill which really makes it stand out. Bon Voyage!
Crosley brings analog music into the 21st century with the Crosley Voyager record player. This briefcase design record
player stands out because of the grill at the front where the two speakers are located behind. Crosley kept the design
of the Voyager minimalistic and with the 2-way Bluetooth receiver this record player is perfect for everyday use.

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• Speakers: 2” x 3¾” (50 x 90mm), 8Ω, 5W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• Autostop
• Dimensions 36cm x 14 cm x 29,5 cm
• Weight 2,9 kg

The Minor Threat LP Tee is equipped with the following features:
• rib crew neck with interior tape
• Minor Threat LP artwork printed on front
• regular fit
• 100% cotton single jersey

The Rolling Stones iron-on embroidered large patch features a Classic Tongue motif. It's approximate size is 95mm high x 85mm wide. Red (PMS 185c), black and white.

The Queens Of The Stone Age Deaf Songs Tee is equipped with the following features:
• rib crew neck with interior tape
• Deaf Songs artwork printed on front
• regular fit
• 100% cotton single jersey

Stylus for Goldring E1 MM Cartridge

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

AT-VMN95EN
VM95 SERIES ELLIPTICAL NUDE REPLACEMENT STYLUS
Aluminium cantilever
Elliptical Nude Stylus
Nude Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

AT-VM95EN vormontiert auf Headshell AT-HS6BK
• Das Tonabnehmer-Set AT-VM95EN/H wird im Audio-Technica Werk in Fukui (Japan) vormontiert, getestet und verpackt.
Gesamtgewicht 15,5 g

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Bad Brains's Capital tee pays homage to their groundbreaking cassette-only debut album on ROIR that laid the foundation for Bad Brains' 1983 masterpiece Rock For Light.

The Bad Brains Capitol T-Shirt's features include:

• rib crew neck
• Capitol artwork printed on front
• regular fit
• 100% cotton single jersey

The Smoked Out t-shirt was done for the Madlib Medicine Show series and features the Madlib smoke cloud from the LP cover for Madlib Medicine Show #11: Low Budget High Fi Music. Artwork by Gustavo Eandi.

The Madlib Smoked Out Tee's features include:

• rib crew neck
• Smoked Out artwork printed on front
• relaxed fit
• 100% cotton

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

ATN-XP5
REPLACEMENT STYLUS FOR AT-XP5 CARTRIDGE
Elliptical bonded stylus
Carbon ABS cantilever
Durable design for DJ application

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

ATN91R
REPLACEMENT STYLUS FOR AT91R CARTRIDGE
Aluminium alloy tube cantilever for the pick-up of subtle details
Replacement stylus for AT91R
Bonded conical stylus

Catalogue: https://eu.audio-technica.com/resources/catalogues/Phono_Cartridges_17.pdf

REPLACEMENT STYLUS FOR VM530EN
Elliptical Nude stylus
Nude Round Shank construction
Orange

VM530EN
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Nude profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

High-end elliptical stylus model equipped with a light-weight nude elliptical stylus to reduce the execution mass of the vibration system. This enables fuller frequency reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 25,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Nude
Stylus Size 0.3 x 0.7 mil
Stylus Construction Nude Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN30EN
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM530EN_UM_V2_11L_web_161021.pdf

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DIGITAL

Attention: Matches the new Concorde MkII only!

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

supplied in Flight case

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

The RIOT DJ-Stashpack XL Plus is a versatile and lightweight gig bag that and was designed to be flexible in order to accommodate a variety of equipment. It features a practical, height-adjustable Rolltop opening to easily stash a battle-mixer, records, production gear or a DJ-controller. With its durable material, solid processing and a unique design, the new RIOT DJ-Stashpack XL Plus is perhaps the most versatile gear bag in the market.

FITS
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DJS-1000
Numark NS6II
Numark NV2
Numark Mixtrack Pro 3
NI Kontrol S5
NI Kontrol S4
NI Kontrol S2
Reloop Terminal Mix 4
Roland DJ-202
Pioneer DDJ-SB2
Pioneer DDJ-RB
Numark Mixtrack Pro 2
Denon MC-4000
Vestax VCI-400
Vestax VCI-380
Akai MPK-25
Akai MPC Renaissance
Rane Seventy-Two
Rane Sixty-Two
Rane Sixty-Eigth
Pioneer DJM-S9
Pioneer DJM-900 SRT/NXT
NI Kontrol Z2
Laptop up to 17’
12“ Vinyl
Accessories

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
Soft-fleece lining
PVC-coated (waterproof zippers)
Lockable zippers on main and laptop compartment
Flexible height adjustment through variable Rolltop Closure
Main compartment includes removable bottom foam and padded side walls
The included (removable) Protection Panel protects jog wheels and faders and the folding top part works like an additional lid when e.g. battle-mixers are stowed.
Separate side entry compartment provides quick access to your laptop (up to 17’’)
Large front pocket with internal zip-pouches and organizers
1 side quick-access side pocket for small accessories and personal belongings
1 side bottle holder
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand-luggage compatible (up to 56 cm height)
Zippered side access laptop compartment with waterproof zippers (up to 17’’

Outer dimensions: (H/B/T): 49-65 x 38 x 26 cm
+ Inner dimensions: : 47-56 x 32 x 20 cm
+ Weight: 2,4 kg

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

The RIOT DJ-BACKPACK is the latest and most compact model of the RIOT line. It was especially designed for digital-DJs travelling with a basic DVS setup such as 15” laptop, Timecode records and accessories or small controllers.
The clever interior layout of the main compartment includes two padded, removable dividers which allowing for three separate protective compartments and the featured “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.

FITS
13-15‘‘ Laptop
NI Maschine
NI Kontrol X1
NI Kontrol F1
NI Kontrol D2
Ableton Push 2
12“ Vinyl
Accessories

BASICS
Crafted from durable and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Soft-fleece lining
Lockable zippers on main and laptop compartment
Rubber corner protectors and rubber feet
Main compartment includes two padded, removable dividers
The “Zip-Around-Expansion-System” doubles the main compartment’s capacity, providing useful extra space for even more gear or clothing for overnight trips.
Separate side entry compartment provides quick access to your 15,4’’ laptop
Two internal hanging mesh accessory pockets comfortably fill out the upper area of the backpack
Large front pocket with internal pouches and organizers
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand luggage compatible

SPECS
+ Outer dimensions: (H/B/T): 53 x 33 x 16-22 cm
+ Inner dimensions: : 40 x 31 x 12-16 cm
+ Weight: 2,2 kg

With a capacity of up to 50 records, the new RIOT LP- Bag 50 is a stylish solution to carry your 12-inch vinyl in comfort and style. Equipped with the same high quality material components the entire RIOT range uses, this bag also matches the new RIOT LP-TROLLEY 50 perfectly and can be easily affixed on to a trolley handle with its trolley sling.

FITS
50 12“ Vinyl
20 7“ Vinyl
13‘‘ MacBook
NI Maschine
NI Kontrol X1/F1/Z1 (inkl. Case)

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
1 cm padding on all sides
PVC-coated (waterproof zippers)
Riveted handles and straps
Soft-fleece lining
Lockable zippers on main compartment
Rubber corner protectors
Ergonomically shaped, adjustable shoulder strap and padded carrying handles
Including trolley-sling to attach on a MAGMA record or equipment trolley
Hand luggage compatible

SPECS
Outer dimensions: 33 x 35 x 20 cm
Inner dimensions: 31 x 32,5 x 16 cm
Weight: 3,7 kg

EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DON’T

Adjustable cartridge which will fit in a traditional headshell mount. Replaceable diamond tip.

• 5" mount+W36
• 0,6mil spherical diamond tip
• tracking force: 2,5g to 3,5g
• ch.separation: 26dB @ 1KHz
• output: 2,4 mV

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.?? These Performance Series pressings are packaged as a single vinyl and available in three classic colours.

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the color throughout a run. Every record is unique.

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

factory – melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in arpeggio and chord play styles
parameter locks.
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-14/en

Technical data:
• Frequency range 20-22.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Red
• Recommended for following cartridges 2M Red / 2M Red Verso(Interchangeable with 2M Blue / 2M Blue Verso)