HHV Records 1290 Items

Chateau Vinyl Solo Flight Cover

58,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

if it"s time for a new protective cover for your chateau vinyl bag, you can order it here as a seperate item.
all djs know about the hard and sometimes rather shortlife of a record case...
the flight cover is the best way to expand the lifetime of your chateau vinyl or chateau vinyl solo bag.

we strongly recommend not to travel especially fly without it. at work the flight cover can stay on the lower part of the case and doesnt need to be taken off completely.

satisfaction is reported by our frequent flying customers.

material: waterproof cordura nylon, produced in germany.
colour: black

made in germany

pictures: airbagcraftworks.com

Go to Item

Taunus 1.5 Com Fi Backpack Premium Nylon (40)

198,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

taunus 1.5 | com-fi pro | premium nylon night sky

largest and most comfortable version of
our puristic and lightweight backpack
for vinyllovers, travellers and minimalists.

_additional spacious pocket on the inner backside
_smaller inside zip pocket
_holds 16inch+ laptops or up to 40 x 12" records
_cushioned back
_extra double-layered breathable mesh cushioned back
_double-layered breathable cushioned shoulder straps
_4x unique adjustable buttons closure made from recycled
genuine leather
_hidden pocket-dock velcro patch for additional pouch options
_40mm wide straps with cushioning: 55mm

material: italian premium nylon with water-repellent coating
colour: black

h:46-49 x w:42 x d:11 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Sub Pop

Logo T-Shirt

23,99 €* 31,99 € -25%

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This t-shirt features Sub Pop's classic logo in blue and yellow, as a gesture of solidarity with the Ukrainian people and refugees, and in an effort to raise much needed support for these hard-pressed people. Profits from the sale of these items will be donated to World Central Kitchen and the important work they do through their Chefs for Ukraine campaign.

The Sub Pop Logo Tee is equipped with the following features:

• rib crew neck with interior tape
• Sub Pop Logo artwork printed on chest
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

Turntable 2.0 T-Shirt

32,99 €*

Take You On A Ride T-Shirt

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Turntable 2.0 Tee is equipped with the following features:
• rib crew neck with interior tape
• Acrylick Turntable 2.0 artwork printed on left chest and on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Infectious Grooves

31,99 €*

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Infectious Grooves Take You On A Ride T-Shirt's features include:
• rib crew neck with interior tape
• Infectious Grooves Take You On A Ride artwork printed on front
• Infectious Grooves vertical branding printed on back
• regular fit
• 100% cotton single jersey

Go to Item

Innovative Leisure

Flamingo T-Shirt

17,99 €* 29,99 € -40%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Innovative Leisure Flamingo Tee is equipped with the following features:
• rib crew neck with interior tape
• Innovative Leisure Flamingo logo printed on left chest
• regular fit
• 100% cotton single jersey

Go to Item

Innovative Leisure

Dot Logo T-Shirt

16,49 €* 29,99 € -45%

Available Sizes: S, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Innovative Leisure Dot Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Innovative Leisure logo printed on left chest
• regular fit
• 100% cotton single jersey

Go to Item

Reloop

Turn 7 (Ortofon 2M Red)

849,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

PREMIUM BELT DRIVE USB TURNTABLE SYSTEM

HIGHLIGHTS:
Belt-driven HiFi turntable with Ortofon 2M Red
20 mm acrylic platter with LED lighting
Decentralised drive motor with external belt guide

SOUND MEETS DESIGN
The Turn 7 bridges the gap between high-end HiFi turntables and uncompromising design. The belt-driven turntable meets the exacting demands of audiophile music fans thanks to precisely manufactured components. The acrylic platter with LED lighting and the external drive belt make the Turn 7 an absolute eye-catcher.

POWERFUL AND STEADY DRIVE
A decentralised, low-vibration DC motor drives the Turn 7. The integral flat belt runs gracefully along the turntable exterior, ensuring smooth operation and a sophisticated appearance. The start/stop rotary switch allows you to select between the turntable's two speeds (33 and 45 RPM).

HEART OF ACRYLIC: THE TURNTABLE PLATTER
The acrylic platter is 20 mm thick, weighs 1.7 kg, and has outstanding evenness thanks to precision manufacturing. It also has excellent antistatic characteristics. As a result, crystal-clear audio is possible without using a platter mat. The satin finish of the material creates a focal point and contrasts with the otherwise plain design of the belt-driven turntable.

LET THERE BE LIGHT – LEDS INSIDE
One of the unique features of the Turn 7 is the optional, blue platter illumination. Inconspicuously placed beneath the platter, multiple LEDs with a diffuser cover sets the mood and creates a warm and inviting ambience.

TOP-CLASS TONE ARM
The high-quality carbon tone arm has exceptional acoustic properties. The turntable's authentic sound is brought out to its full potential by effectively cancelling out vibrations. The ability to adjust the height (vertical tracking angle – VTA) and an anti-skating adjustment ensure maximum precision.

ORTOFON 2M RED PRE-INSTALLED
The turntable comes with the Ortofon 2M Red cartridge system pre-installed. The Ortofon 2M Red has an elliptical stylus tip and excellent sonic characteristics, including first-rate sound accuracy and reproduction. The Ortofon 2M Red is a highly versatile cartridge system with an open, dynamic sound and warm tones. The universal headshell connection (SME) adds more options for cartridge systems.

METICULOUSLY PERFECTED
In addition to its high-quality preamplifier, the Turn 7 also features versatile switching between line and phono signals. The gold-plated corrosion-resistant RCA connectors ensure the best possible signal transmission. The built-in USB output allows you to digitise vinyl records.

SIMPLE DESIGN & PURE FUNCTIONALITY
The sturdy MDF wooden plinth and height-adjustable isolator feet with aluminium surround provide effective decoupling for the turntable. The high-gloss piano lacquer is a classy contrast to the timeless minimalism while emphasising the Turn 7's superior quality.

FEATURES:
• Premium belt-driven HiFi turntable
• Decentralised DC motor with external drive belt on the acrylic platter
• Fully manual operation with motor control switch for switching between speeds (33/45 RPM)
• Precision-machined, 20 mm thick solid acrylic platter (1.7 kg) with outstanding levelling and electrostatic properties for a crystal-clear sound
• Indirect blue LED lighting on the acrylic platter (can be switched on/off)
• Audiophile carbon tonearm with height adjustment (VTA) and anti-skating adjustment
• Pre-installed Ortofon 2M Red cartridge for optimised sound reproduction and fidelity
• Universal headshell connection (SME) for additional flexibility
• USB recording function: Recording and digitisation of vinyl via the simply USB connection for PC/Mac
• High-quality integrated preamp (switchable phono/line output)
• Gold-plated, corrosion-resistant audio connections (removable power and RCA cable)
• Height-adjustable, shockproof aluminium feet for effective decoupling
• Solid MDF plinth with piano finish and a timeless design
• Incl.: dust cover, 2x hinges, felt mat, international power supply (UK/EU/US), RCA cable, headshell with Ortofon 2M Red (pre-installed), 7" aluminium adapter, acrylic turntable platter, allen key, USB-cable, instruction manual & counterweight

TECHNICAL SPECIFICATIONS:
Turntable Section:
• Type of turntable: Belt-Driven manual Turntable System with USB Interface
• Drive: Belt drive
• Motor: DC Motor
• Rotation speeds: 33 1/3, 45
• Starting Torque: //
• Start-up time / rpm change: //
• Wow and Flutter: 0,2% WRMS
• S/N Ratio: >45dB or higher
• Breaking System: Manually
Turntable Platter:
• Turntable Platter: Acrylic glass
• Diameter: 300 mm
• Weight: 1.7 kg
Tonearm Section:
• Type: Straight Tonearm
• Effective Length: 223.6 mm
• Overhang: 18.61 mm
• Tracking Error Angle: ±1.5°
• VTA Adjustment Range: - 2 ~ 4 mm
• Applicable Cartridge Weight: 7.2 ~ 11.2 g (incl. Headshell)
• Anti-Skating Range: 0 - 4 mm
• Terminals: 1x PHONO/LINE Out
Cartridge:
• Ortofon 2M Red
• Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
• Channel balance at 1 kHz: 1.5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency response: 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force: 70 µ Mm
• Compliance, dynamic, lateral: 20 µ Mm
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.6-2.0 g (16-20 mN)
• Tracking force, recommended: 1.8 g (18 mN)
• Tracking angle: 24.7°
• Internal impedance, DC resistance: 1.3 kOhm
• Internal inductance: 700 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 150-300 pF
• Cartridge colour, body/stylus: Black/Red
• Cartridge weight: 7.2 g
General:
• Power Supply: 12V, 1A DC
• Power consumption: 12W
• Dimensions: 420(W) x 356(D) x 148(H) mm
• Weight: 8.2 kg

Go to Item

Frame Your Records

Jimmy Cage Jr.

66,75 €* 89,00 € -25%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jimmy Cage Jr. is part of the Frame Your Records product series Record Jack, which includes shelves made of MDF that can be perfectly integrated into the room. Capacity: approx. 40 7 inch singles. Material: MDF & plastic.

Made in Germany!

Go to Item

Frame Your Records

Record Jack

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Frame Your Records product series Record Jack includes shelves made of Multiplex, which can be perfectly integrated into the room. Not every LP cover necessarily matches every shelf color, so this item comes in different shades. Outside dimensions: 390 x 390 x 133 mm / Inside dimensions: 320 x 320 x 95 mm; Capacity: 13 - 25 LPs. Material: Multiplex & plastic.

Made in Germany!

Go to Item

Classic 12inch Recycled Air Mattress (50)

129,00 €*

Jesse Dean Stanton STX Fader Skully Face Plate

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: red

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Jesse Dean Designs

11,99 €*

12" | 2023 | UK | Original (Intergalactic Research Institute For Sound)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Go to Item

V.A.

Staub007

19,59 €* 27,99 € -30%

Release: 2023 / UK – Original

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Outline T-Shirt

34,99 €*

Available Sizes: S, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The KMD Outline Tee is equipped with the following features:
• rib crew neck with interior tape
• KMD logo screenprinted on front
• KMD lettering on back
• printed inner labels
• relaxed fit
• heavy weight, 6.5 oz/yd2, 22-singles
• 100% combed cotton

Go to Item

Logo Knit Hat

39,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The KMD Logo Knit Hat is a vintage rib-knit, two-layer beanie equipped with a 2-colored KMD embroidered patch at the cuff. Made from 100% acrylic.

Go to Item

MF DOOM

DOOM Rugby Shirt

142,49 €* 149,99 € -5%

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MF DOOM Rugby Shirt is equipped with the following features:
• color-blocked cut and sew construction
• contrast turn-down collar
• hidden button placket at upper chest
• stretch rib cuffs
• side notches at bottom hem
• tackle twill collegiate white “DOOM” lettering on front
• woven GasDrawls sewn tag on inside neck
• Herringbone Tape
• Rubber Buttons
• Appliqué
• Woven Trim
• regular fit
• 100% cotton
• CARE INSTRUCTIONS: DRY CLEAN ONLY

Go to Item

MF DOOM

DOOM 5 Panel Cap

47,99 €* 59,99 € -20%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For ages, a headgear item like the Rhymesayers MF DOOM five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Rhymesayers MF DOOM 5 Panel Cap is equipped with the following features:

• "DOOM" lettering on front panel
• flat visor
• adjustable nylon strap with side-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• woven GasDrawls sewn tag on inside
• 100% cotton twill

Go to Item

Brothers Longsleeve

54,99 €*

Available Sizes: S, M, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The KMD Brothers Longsleeve Tee is equipped with the following features:
• rib crew neck with interior tape
• KMD brothers artwork screenprinted on chest
• KMD lettering on back
• custom printed inner label
• stretch rib cuffs
• regular fit
• mid weight, 5.3 oz/yd2, 28-singles
• 100% cotton single jersey

Go to Item

Outline Hoodie

109,99 €*

Available Sizes: S, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The KMD Outline Hoodie´s features include:
• drawstring-adjustable two-layer hood with interior tape, metal eyelets plus aglets at the draw cord
•Split stitch double-needle sewing on all seams
• raglan sleeves
• KMD logo printed on front
• KMD embroidery on left sleeve
• kangaroo pocket
• twill neck tape
• custom sewn tag on inner neckline
• stretch rib cuffs and bottom band
• regular fit
• heavy weight 10.3oz, 80% cotton / 20% recycled polyester anti-pill fleece

Go to Item

Beastie Boys

Grand Royal Hoodie

49,99 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys Grand Royal Hoodie´s features include:
• drawstring-adjustable two-layer hood with metal eyelets
• Grand Royal artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• regular fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Beastie Boys

Graffiti Logo Hoodie

49,99 €*

FLUX-Turbo Ersatz-Filter (2 Stk.)

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys Graffiti Logo Hoodie´s features include:
• drawstring-adjustable two-layer hood with metal eyelets
• Beastie Boys Graffiti logo printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• regular fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Flux Hifi

29,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement filter for the FLUX-Turbo.
The replacement filter must be changed approx. every 2 to 3 months or after 20 aspirations to ensure a good suction result. Two filters are supplied in a double pack.
The inner filter material is selected to retain the coarse particles. At the same time, the suction power is not reduced too much by the pressure loss.
The FLUX-Filter is compatible with FLUX-Turbo and the FLUX-Turbo 2.0.

Weight: 3 g
Size: 3 x 3 x 3.5 cm

Go to Item

Flux Hifi

FLUX-Turbo Ersatz-Kufen

19,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement skids for the FLUX-Turbo.
After approximately one year of use, we recommend replacing the skids. In the set all 3 skids are included: 2 short ones for the sides an one long one for the suction channel.

Measures short:
Weight: 0.1 g
Size: 2 x 0.6 x 0.5 cm

Measures long:
Weight: 0.3 g
Size: 10.5 x 0.6 x 0.4 cm

Go to Item

Taunus 1.2 Com Fi Backpack Ballistic Nylon (25)

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

taunus 1.2 | com fi | ballistic nylon black

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: certified cordura® ballistic nylon, water-repellent
colour: black
size: 48 x 38 x 8 cm

aw2019 / 2020 collections instruments

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

RCA-C (123cm)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RCA-C (20,5cm)

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Phono RCA-C (82cm)

75,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

Power Box S3 Phono

179,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MaiA S3

569,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Q UP

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VNL Premounted x SH-4 Headshell Black

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Get ready to Plug’n Play

Designed to fit any standard DJ turntable. Features high quality tonearm terminal connections.

Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern
turntablists and portablists.
The plug'n play solution has become an expected and necessary asset for the user, and
with the new VNL Premounted, it’s not getting easier!
The VNL has been paired with our popular black SH-4 Headshell, which securely frames
the VNL cartridge to deliver its absolute best. The VNL Premounted fits any standard DJ
turntable and tonearm and features high quality tonearm terminal connections. We've
created the perfect kit, where you'll have the high standard of the VNL matched with our
favorite headshell to deliver superb convenience and great value.

Just the stylus VNL II is product content!

Features:
• Mounted on Ortofon SH-4 Black headshell with universal mount.
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data:
• Stylus Type: Sperical
• Tracking Force: 4,0 g
• Output Voltage: 6mV
• Frequency Range: 20-20.000 Hz
• Output voltage at 1000Hz, 5cm/sec. - 6 mV
• Channel separation at 1kHz - 20 dB
• Frequency response 20 Hz - 20 kHz -2/+4 dB

• Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

• Tracking force range - 3 - 5 g
• Tracking force recommended - 4 g
• Antiskating - for best backcueing performance use “0”
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-600 pF
• Cartridge weight - 6,5 g

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

El Jazzy Chavo

S950 Funk T-Shirt

23,99 €* 29,99 € -20%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The El Jazzy Chavo S950 Funk Tee is equipped with the following features:
• rib crew neck with interior tape
• S950 Funk artwork printed on chest
• additional branding printed at top rear
• regular fit
• 100% cotton single jersey

Go to Item

Jetpack

Glide System

519,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jetpack

339,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Speaker Box 5 S2 (Paar)

649,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

warp x airbag craftworks

19.4 Recordbag

279,00 €*

Campaign Volume I & II: 1979 - 2020

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

warp x airbag craftworks | 19.4

the 19.4 model is a wider version of warp x airbag craftworks 14.7 with additional capacity for up to 17" laptops.
ideally suited to djs or as an overnight bag perfect for travelling and everyday use.

_water-repellent ykk zippers with 2 sliders
_matt black coated metal carabiners & d-rings
_debossed leather warp logo patch with detailing in warp purple
_leather zipper tags in warp purple
_adjustable shoulder strap with leather shoulder pad
_shoulder pad leather debossed with a2 logo
& warp x airbag craftworks detail
_doubleface heavy duty leather handles with push button
_soft-cushioned back with pocket function
_leather feet/stands with circle debossing
_inside laptop holder space for up to 17" laptops

material: certified cordura® nylon
colour: black

made in germany

42 x 33 x 14 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Sutcliffe Jügend

Box Set | 2023 | Original (Vinyl On Demand)

399,99 €*

Release: 2023 / Original

Genre: Rock & Indie

Available Sizes: BOX SET+S, BOX SET+M, BOX SET+L, BOX SET+XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sutcliffe Jügend Tee is equipped with the following features:
• rib crew neck with interior tape
• XXX logo/artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Run DMC

Photo Poster T-Shirt

19,99 €*

Available Sizes: M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Run DMC Photo Poster Tee is equipped with the following features:
• rib crew neck with interior tape
• Run DMC Photo Poster artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Stylus Guard for 2M Series (1 Stück)

2,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Guard for 2M Series (1 Stück)

2,39 €* 2,99 € -20%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Guard for VNL

8,41 €* 9,90 € -15%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Styli protection caps for VNL cartridges and styli

The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.

The protection caps come in pairs.

Go to Item

"In ViNyL We Trust" Slipmat

19,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

High quality 12" professional grade slipmat. Ideal for scratching and turntablists. Provides durability and will not scuff or damage vinyl.

• Made out of a smooth but strong material
• Unique matte surface
• Far more resistant to dust and other particles
• Extra thin and provide optimum feel for DJs
• Comes in pairs packaged inside a sleeve

Awesome 3D design
The VNL 3D design is developed in collaboration with DJ ND and Maxime Bouchat, Graphic Designer, Blue Marine Productions Associées.

The slipmat design uses several elements linked to the DJ culture:
• Scissors stand for "Cutting sounds"
• Equalizer levels picture refers to the mixers' levels
• Spiral symbolises turntable platter when spinning

The effect of animation is fully obtainable when the pitch is set to 33 +8.

Go to Item

"Cause I Can Do It In The Mix" Slipmat

19,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Stylus Moonstone

275,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Pearl

110,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Black Pearl

75,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moonstone MM-Tonabnehmer

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Olympia MM-Tonabnehmer

249,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Rainier MM-Tonabnehmer

175,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pearl MM-Tonabnehmer

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Black Pearl MM-Tonabnehmer

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Oyster MM-Tonabnehmer

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Little Fwend

Little Disco Fwend

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

12" | 2023 | EU | Original (Odd Even)

Eddie Hale

Bad Sector

13,99 €*

Unkraut Vergeht Nicht T-Shirt

Release: 2023 / EU – Original

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Eddie Hale with 4 slamming Detroit heads moving tracks on Andre Kronerts label ODD Even. Athmospheric, driving and deeply impressive! Then a brilliant remix of the old master Ken Ishi. 150g Colored Vinyl.

Go to Item

Danger Dan

27,99 €*

LP Storage Box "A Vulgar Display of Vinyl" (68)

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Danger Dan Unkraut Vergeht Nicht Tee is equipped with the following features:
• rib crew neck with interior tape
• Unkraut Vergeht Nicht artwork printed on front
• regular fit
• Organic unisex T-Shirt with reduced CO₂ emissions, material composition: 100% organic cotton (GOTS), jersey 155g/m²

Go to Item

Musicbox Designs

69,99 €* 99,99 € -30%

7" Storage Box "Singles Going Steady" (140)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Your record collection is a reflection of you. So, show off your vinyl in our beautiful display box.

We designed the Vulgar Display of Vinyl box to be used as a stand alone vinyl storage unit or to be placed on top of one of our 12 inch Music Boxes to further enhance, maximize storage space and organize any listening room. The convenient top flipping makes finding your current rotation favorites easy as pie. It's a bit like crate digging in your own home.

This brand new addition to our line of vinyl storage products is made of solid 18mm thick Oak wood and sanded to seductively smooth finish then topped off with our delicious wood oil.

Each Vulgar Display Box can hold at least 68 LP's (depending on the thickness)

Please note that unlike our other products, you will have to assemble it yourself. All you'll need is a screwdriver and a few minutes, then BAM!! Vinyl Heaven Awaits.

External Dimensions:
• Back Height: 23 cm
• Front Height: 12 cm
• Length: 34cm
• Width: 36.7cm
• Weight : 4.96kg

Sourced and crafted in Europe!

Go to Item

Musicbox Designs

74,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.
After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

Go to Item

LH-4000 Headshell

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

Go to Item

LH-2000 Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Go to Item

MC Quintet Red

349,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Enter the Exclusive world of Ortofon’s famous moving coil sound!
The Quintet Red is a perfect introduction to the world of Ortofon moving coils.
It features an Elliptical diamond which is cut and polished to Ortofon’s standards.

This entry-level MC cartridge has very high price-to-performance ratio and is a perfect all-rounder for the newcomers to the world of Moving Coil cartridges.

MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The ST-7 transformer is a perfect match for the MC Quintet Red cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.

MC Quintet Red Technical data:
• Output voltage at 1 kHz 5 cm/sec - 0.5 mV
• Channel balance - < 1.5 dB
• Channel separation at 1 kHz - > 21 dB
• Channel separation at 15 kHz - > 14 dB
• Frequency response 20-20.000 Hz - +/-2.5 dB
• Tracking ability at 315 Hz at recommended tracking force *) - 65 μm
• Compliance, dynamic, lateral - 15 μm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 μm
• Tracking force range - 2.1-2.5 g (21-25 mN)
• Tracking force recommended - 2.3 g (23 mN)
• Tracking angle - 20º
• Internal impedance, DC resistance - 7 Ohm
• Recommended load impedance - >20 Ohm
• Cartridge body material - ABS/Aluminium
• Coil wire material - Copper
• Cartridge colour - Red
• Cartridge weight - 9 g
*) Typical value

Compatibility with Rega brand TT/TA:
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.
3.2 - 4 mm spacers should be enough for Quintet cartridge.

Ease of use
Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell.

The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. The Quintet Series gives excellent results with most common tonearms.

Go to Item

Super OM 5E

85,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

Go to Item

OM 5E

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

• OM 5E Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5E
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

OM 5S

45,00 €*

Jesse Dean Stanton STX Fader Skully Face Plate

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OM 5S is a moving magnet cartridge for general purpose application
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g.

The OM 5S features Spherical stylus, robust and economic solution for play back of vinyl records.

For more than 50 years, Ortofon has been designing and manufacturing Moving Magnet cartridges. Along with our well-regarded Moving Coil cartridges, Moving Magnet models have established a good reputation among music lovers and Hi-Fi enthusiasts the world over.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

OM 5S Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV
• Channel balance at 1 kHz - 2 dB
• Channel separation at 1 kHz - 20 dB
• Channel separation at 15 kHz - 12 dB
• Frequency response - 20-22.000 Hz
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 750 Ohm
• Internal inductance - 450 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5S
*) Typical value

Styli types and interchangeability
By adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget.
In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

Go to Item

Jesse Dean Designs

11,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Go to Item

One Nation Crewneck Sweater

49,99 €*

Available Sizes: S, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick One Nation Crewneck Sweater's features include:
• rib crew neck with interior tape
• vinyl record graphic printed at left chest
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Stylus 20

199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 25 µm/mN
• Stylus type - Nude Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: Super OM 20, OM 20, OMP 20, OMB 20, LM 20, Concorde 20, LM 20H, TM 20U, TM 20H
*) Typical value

Go to Item

Stylus 510 MK II

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 3 /- 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended - 1.5 g (15 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for Series 500 Mkll, 510, 510 P, Alfa
*) Typical value

Go to Item

Stylus 14

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Go to Item

Stylus D 25 M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Go to Item

Stylus 78

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Go to Item

Stylus 7

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response: 20-18.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *): 60 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 7 and TM 7U cartridges models
*) Typical value

Go to Item

Stylus 3E

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Go to Item

Stylus 5S

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical specifications:
• Frequency response - 20-20.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17,5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 5S and OM 1S
*) Typical value

Go to Item

Magma

CTRL Case DJM-V10/DJM-A9

139,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Introducing the CTRL CASE DJM-V10/DJM-A9 - the perfect protective solution for DJs on the go. This durable case is custom-designed to fit both, the latest Pioneer DJM-A9 and DJM-V10 club-mixer models, providing maximum protection with a Durashock molded EVA shell and fully padded interior. Plus, it features a convenient slot for storing audio cables and power adapters.

FITS:

• Pioneer DJM-A9
• Pioneer DJM-V10

BASICS:

• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-foam plus fully padded interior
• Comfortable, rivet reinforced carrying handles and shoulder strap (with metal buckles)
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 57 x 56 x 15 cm
• Inner measures DJM-V10: 46 x 44 x 7 cm / DJM-A9: 43 x 41 x 7 cm (Equipment slot)
• Weight: 2,3 kg

Go to Item

Phono RCA-C (185cm)

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Nagaoka

DJ-44G - Stylus

59,00 €*

Montero Bluetooth Speaker

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

Go to Item

Crosley

137,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Turn it up to 11 with the Montero Speaker! With 15 hours of uninterrupted play on a single charge of the built-in lithium battery, this small-but-mighty 20 watt powerhouse will rock your party from beginning to end. You don’t have to be tech savvy to enjoy this speaker, short press the power button once to turn on and short press twice to power off. The aux input enables you to hook up the Montero to your existing stereo setup, or you can transmit your digital tunes wirelessly using the built-in Bluetooth receiver. There’s also a built-in USB charger for those times when your phone battery is hovering way too close to 1%. Never again will a dead phone battery ruin your good time! Keep your party going all night with the stylish and powerful Montero Speaker.

Specifications:
• Built-in Bluetooth® Receiver
• 20 Watt Amplifier
• Built-in Lithium Battery
• Auxiliary Input
• USB Phone Charger
• Unplug Unit Before Powering Off
• Dimensions: 26 cm (w), 16,5 cm (h), 5,7 (d)
• Weight: 1,25 kg

Go to Item

RCA-CC (82cm)

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Chateau Vinyl Cotton (75)

328,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

chateau vinyl offeres a perfectly protected, shock-absorbing and cushioned space for 75 x 12inches with two equal subdivisions that can be divided to both sides. this unique feature makes record selecting more comfortable in different club situations. the extra outside pouch holds smaller cd cases, effect machinery and headphones. djs that fly to work can use this bag on board. the flight cover, an easy, lightweight and highly sustainable solution to protect and extend the life of your chateau vinyl, is included. advise to all the flying djs: don't check-in without!

_attached outside pouch that works like a stand alone shoulder bag
_2-way zipper
_adjustable 50mm shoulderstrap
_comfortable, cushioned shoulder pads
_easy to clean, cushioned record cases

material: water-repellent cotton
colour: black

made in germany

chateau: 35 x 34 x 24 cm pouch: 35 x 24 x 8 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Go to Item

Cambridge Audio

SX60

369,00 €*

Impact Tonabnehmer mit N44-7 DJ IMP NUDE

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Standmount Speakers

• 25mm silk dome tweeter – for refined presentation
• 165mm treated paper cone – for a smooth & even frequency response
• Precisely optimised crossovers – for a neutral, phase linear, response
• CAD modelled rigid MDF cabinet – reduces standing waves, keeping internal vibration to a minimum
• Refreshed clean design – designed to complement today’s interiors

SX60. Sound Comes First
SX60 standmount speakers build on the strengths of SX50, taking on a larger form-factor for an assured musical performance. They can work happily in bigger spaces, while still offering you flexibility in terms of placement. Speaker stands or a cabinet top, it’s your call. SX60’s combination of engineering, confident sound reproduction, and price makes them a winning combination.

Rock Solid Foundations
Hi-fi speaker engineering starts with the cabinet. Computer-aided design (CAD) was used extensively to refine SX60’s internal structures, to ensure that while the drivers are vibrating with your music, the cabinet isn’t. This means that every millimetre of movement from the drivers is directed where it should be – at you.

Stand and Deliver
SX60 speakers have a 165mm (6.5") woofer made from treated paper. Hi-fi manufacturers have used it for years, as paper’s impressive strength-to-weight ratio is matched by excellent tonality – so instruments sound rich, well defined, and real. 25mm (1") soft dome tweeters, made from treated silk, take care of the higher frequencies – with the same balance of realism and refinement.

Two Drivers, One Voice
Our team in London took great care and attention when designing the crossovers in SX60 – as they’re responsible for ensuring that each driver receives the correct frequency. Accuracy of timing and stereo imaging depend on phase remaining completely linear, from top to bottom. The result? Your music sounds engaging, energetic and real.

Engineered, Front to Back
Attention to detail on SX60 runs from front to back. There’s a neat bass reflex port, directly under the woofer, which emphasises lower frequencies to provide rich engaging sound. Spin SX60 around to reveal a pair of high-quality speaker binding posts (connectors), which can accept thick speaker cable – with or without banana plugs.

Designed for Real Life
New look SX60’s clean, understated design allows them to sit in a variety of spaces, and work well in all. Leave the grilles on to protect the drivers from little fingers, or to gain acceptance from your interior designer – alternatively take them off to celebrate your great taste in music (and speakers).

Technical specifications:
• SENSITIVITY: 89dB
• FREQUENCY RESPONSE: 41Hz - 22 kHz
• IMPEDANCE: 8 Ohms
• RECOMMENDED AMPLIFIER POWER: 20-100 watts
• DRIVERS: Tweeter: 1 x 25mm (1") silk dome tweeterMid/Bass: 1 x 165mm (6.5") doped paper cone
• CROSSOVER: 2 way
• PORTED: 1 front
• COLOUR: Black Matte
• DIMENSIONS (HXWXD): 340 x 200 x 272mm (13.3 x 7.9 x 10.7")
• WEIGHT: 5.0kg (11lbs)

Go to Item

Jico

229,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

myVolts

Pocket Operator Case

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Flying Record Strapback Cap

Don't Sleep Records

32,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Custom stitched 6 panel strap back hat with brass clasp, embroidered logo on front, woven label on back of cap and custom Don't Sleep in-seam tape.

Don't Sleep Records Flying Record Strapback Cap - Features:

• mid rise 6-panel construction
• Don't Sleep Records branding embroidered on front
• tonal eyelet stitching
• curved contrast visor
• adjustable leather strap with metal buckle plus Don't Sleep Records woven flag label at the rear
• interior includes branded tapes and a moisture-absorbing sweatband
• 100% cotton twill

Go to Item

Creator Denon DJ SC Live 2 Hardcase

129,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ SC LIVE 2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Denon DJ SC LIVE 2, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Denon DJ SC LIVE 2

Specifications:
• Weight: 3,50 kg / 7.7 lbs
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 66.1 x 39.9 x 11.2 cm | 26.0 x 15.7 x 4.4 inch
• Material: Durashock molded EVA foam

Go to Item

Keep Them Spinning

Vinyl Break

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Vinyl Record Storage • Record Holder Wall Mount for 50 LPs • Storage for Records with Now Playing Stand included

The Vinyl Record Holder Wall Mount for 50 LPs is the perfect way to display your vinyl collection in style.
This eco-friendly steel wall mount can hold up to 50 LPs, making it an ideal storage solution for music enthusiasts.
The unique vintage design adds a touch of nostalgia to any room and comes in two sleek colors – Vintage White and Matte Black – to match your personal taste.
The included “Now Spinning” stand highlights your favorite album, making it the perfect conversation piece. The minimalist and practical design not only helps you keep your collection organized but also provides a visually appealing display.

Specifications:
• Capacity: 50 Vinyl Records
• Material: Steel
• Colors: Matte Black

Go to Item

Dubreq

Stylophone S-1 Bowie

37,99 €*

Stylophone S-1 Bowie Carry Case

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BOWIE STYLOPHONE - LIMITED EDITION
GET THE 'SPACE ODDITY' SOUND

Ground control to Major Tom: introducing the limited-edition Bowie Stylophone, a stylish reimagining of the original pocket synthesizer. Featuring a sleek white casing and classic Bowie design, this quirky instrument celebrates the buzzy space-age sound at the core of David Bowie’s 1969 classic ‘Space Oddity’ in true retro style – the ultimate collectible for any Bowie fan.

RETRO BOWIE STYLE
This Stylophone has had a makeover. Now with a dazzling white frame, speaker surround and back panel, and the spaceship-silver grill has the electrifying Bowie logo embossed on it – fit for Ziggy himself.

THE ORIGINAL POCKET SYNTHESIZER
Beneath the Starman exterior, you’ll enjoy the much-loved analog experience that’s entertained millions since the ‘60s. Fun stylus operation, authentic analog sound, 3 different modes with a wobbly vibrato button – great for all kinds of classic synth and bass sounds. Once you pick it up, you won’t want to put it back down…

PORTABLE & EASY TO USE
At less than 12cm wide, it’ll fit right in your coat pocket, rucksack, or handbag. Better still, it runs on 3 x AA batteries, and features a built-in speaker and headphone socket, so you can play it everywhere you go. Tune it up with the control on the back, choose your sound, and play along to your favourite songs – perfect for synth enthusiasts and beginners alike!

Video: https://youtu.be/b7AciDoQtgM

Go to Item

Dubreq

11,19 €* 15,99 € -30%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OFFICIAL BOWIE STYLOPHONE CARRY CASE

Bowie Stylophone Logo on the front

SPECIAL SECURE FIT DESIGN

Special secure-fit design – Made from stress-resistant EVA Internal mesh pocket for accessories

BOWIE ZIPPER TAG

Embossed Bowie logo and Stylophone logo zip tags

The Stylophone S-1 Bowie fits perfectly into this carry case.

Please note: CASE ONLY. Does not include the Stylophone S-1 Bowie synthesizer

Go to Item

Yukio Decks T-Shirt

23,99 €* 29,99 € -20%

Available Sizes: S, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Acrylick Yukio Decks Tee is equipped with the following features:
• rib crew neck with interior tape
• Acrylick Yukio Decks artwork printed on chest
• regular fit
• 100% cotton single jersey, 6 oz

Go to Item

Gone Diggin' T-Shirt

29,99 €*

Available Sizes: S, M, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Acrylick Gone Diggin' T-Shirt - Features:
• rib crew neck with interior tape
• Acrylick branding printed on left chest
• Gone Diggin' artwork printed on the rear
• regular fit
• 100% cotton single jersey, 6 oz

Go to Item

IsoAcoustics

zaZen I

239,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AIAIAI

S01 MKII Speaker Unit

59,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AIAIAI

TMA-2 DJ XE

139,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Modular DJ headphones.

Features:
• Balanced sound
• High isolation PU leather earpads
• Clear sound at high volume levels
• High sound isolation on-ear cushions
• Weighing only 168g
• Modular headphone design

Go to Item

Automat A2 (Ortofon 2M Red)

1.199,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

TK MS You Can't Bring Me Down Tank Top

Suicidal Tendencies

29,99 €*

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Suicidal Tendencies TK MS You Can't Bring Me Down Tank Top - Features:
• rib details at neckline and arm openings
• You Can't Bring Me Down artwork printed on chest & on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Koss

Y88 - Splitter

6,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Madlib

Headlib T-Shirt

34,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Madlib Headlib Tee is equipped with the following features:
• rib crew neck with interior tape
• Headlib artwork printed on front
• regular fit
• 100% cotton tubular jersey, 6 oz
• preshrunk to minimize shrinkage

Go to Item

Nas

Nas York City T-Shirt

22,99 €*

Available Sizes: M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Nas York City Tee is equipped with the following features:
• rib crew neck with interior tape
• Nas York City artwork printed on front
• Nas Stillmatic 20th Anniversary graphic printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Ultimate 7" Record Case (200)

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
Protection:
• Corrosion resistant aluminium profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Strong butterfly lock & solid metal hinges
• Rubber feet at the bottom for support in standing

Extra's:
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Ergonomic & sturdy carry handle

Fits:
• Approximately up to 200 7"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Specifications:
• Weight: 2,50 kg / 5.5 lbs
• Outer Dimensions (W x H x D): 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
• Inner Dimensions (W x H x D): 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
• Material: Aluminum

Go to Item

Ultimate Flight Case Pioneer DJM-A9

269,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Pioneer DJM-A9 Black also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Pioneer DJM-A9 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corner

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Removable cable & PSU storage cover panel

Fits:
• 1x Pioneer DJM-A9

Specifications:
• Weight: 7,90 kg / 17.38 lbs
• Outer Dimensions (W x H x D): 56.1 x 45.9 x 21.6 cm | 22.1 x 18.1 x 8.5 inch
• Inner Dimensions (W x H x D): 42.3 x 40.9 x 15.6 cm | 16.6 x 16.1 x 6.1 inch
• Material: Heavy duty construction of 9 mm thick plywood

Go to Item

Ultimate Flight Case Rane Four Plus (Laptop Shelf + Wheels)

379,99 €*