HHV Records 580 Items

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Czarface Czar Noir Tee is equipped with the following features:
• rib crew neck with interior tape
• Czar Noir artwork printed on front
• regular fit
• 100% cotton single jersey, 6 oz, with super soft hand feel

Go to Item

Questlove

Sketch T-Shirt

37,99 €*

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The QuestLove Sketch Tee is equipped with the following features:
• rib crew neck with interior tape
• QuestLove Sketch artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Glorious

Record Box Advanced 110

37,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Suicidal Tendencies

Longsleeve

37,99 €* 39,99 € -5%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies Longsleeve Tee's features include:

• rib crew neck
• Suicidal Tendencies lettering printed on front and back
• Suicidal lettering printed on sleeves
• relaxed fit
• 100% cotton single jersey

Go to Item

Numark

HF 175 DJ Headphones

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

WCL-222 Argento Micro - Vinyl Record Velvet Brush

Nagaoka

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Micro Wet Brush

Spray a cleaning fluid onto the velvet brush and brush along the sound groove of the record. Then wipe with a soft cloth. After use, dry the brush thoroughly, remove any dust and store it in its box. If the body becomes brown and dirty, we recommend that you replace it as soon as possible.

Go to Item

VNL \\\ Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\ Stylus

V.Raeter x Laser Barcelona

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

Alltimers Tee

39,95 €*

Available Sizes: 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The V.Raeter x Laser Barcelona Alltimers Tee is equipped with the following features:
• rib crew neck with interior tape
• V.Raeter x Laser Barcelona Alltimers artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Top- & Baseboard für 12" Aufbewahrung (3x110)

45A - Glow N Dark 45 Adapter

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For the production of furniture for the storage of records Record Box offers two sets, each consisting of a top and base board. The set for three 12-inch boxes, with a length of 108 cm and a width of 36 cm, is ideal for individual combinations with the 12-inch 110 storage boxes or 12-inch 50 storage boxes.

The set is available in two colors and accommodates three 12-inch 110 or six 12-inch 50 storage boxes. Depending on the color choice, arrangement of the modules and the use of additional register boxes and add-ons, hi-fi furniture, sideboards, highboards and even DJ racks or flat record racks can be realized. Creative storage space can also be created with the help of the boxes and sets for storing folders, books, clothes and other items.

Baseboard is a pedestal board equipped with adjustable feet, which can compensate for minor unevenness of the floor. The topboard provides the top finish and a smooth top for the furniture piece. 12-inch 100-boxes or 12-inch 50-boxes can be stacked between the boards and connected together using Record Box's specially designed adhesive dots. Top and base boards are made of high-quality MDF and feature a durable melamine finish.

Record Box stands for design diversity and flexibility. The modular system can be optimally arranged in any room according to the individual wishes of the user.

Technical details:
• Dimensions: approx. 108 x 36 x 4 cm
• Permissible total height: maximum three 12-inch 110 storage boxes on top of each other
• Material: 15 mm MDF with melamine coating – white, black
• Connecting element: adhesive dots from »Record Box«
• Boxes for self-assembly - screwdriver required!

Go to Item

Wax Rax

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Glow N Dark version of our world famous 45A seven inch vinyl record adapter.

World's best 45 adapter - 45A color anodized 7 inch vinyl record adapters

Spin your 45s right with the 45A seven inch vinyl record adapter by WAXRAX.

The 45A is a professional turntable accessory. Our patented shape fits the record and your hand like a glove. Not too light or heavy, the 45A weighs in at 39 grams for the perfect feel. This adapter won't lift up when scratching or changing discs.

Spin your singles in style with a WAXRAX 45A today.

Great for DJ's spinning in clubs or the perfect night light for vinyl fiends.

Made in New York City at the Wax Rax lab.

Go to Item

Beef Rapp T-Shirt

Available Sizes: S, M, L, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

The MF Doom Beef Rapp Tee is equipped with the following features:

• Regular fit
• Midweight, 5.3 oz, 28-singles, 100% combed cotton
• Neck ribbing, side seamed, shoulder-to-shoulder tape, double needle hems, preshrunk
• Five-color screen printed front badge with multi-color print detailing on the back, printed inner label
• Illustrations by Sam Rodriguez.

Go to Item

Edward

Eddie Green T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Smallville Edward Eddie Green Tee is equipped with the following features:
• rib crew neck with interior tape
• Eddie Green artwork printed on front
• regular fit
• 100% cotton single jerse

Go to Item

Roland

Xlarge Roland T-Shirt

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Roland Xlarge Roland T-Shirt's features include:
• rib crew neck with interior tape
• Xlarge Roland artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

The Notorious B.I.G.

Crown Hoodie

Marcus Mumford (Mumford & Sons)

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Notorious B.I.G. Crown Hoodie's features include:
• drawstring-adjustable hood with metal eyelets
• Biggie Crown artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

(self-titled) Red Vinyl Edition

LP | 2022 | EU | Original (Island)

40,99 €*

Release: 2022 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PANDA presents Isaac Haze X DJ C.S.P.

ACAP / 10 Y Bundle

| Original (DUSTONWAX)

41,99 €*

Cloud of Smoke S/S T-Shirt

Release: Original

Genre: Hip Hop

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

We celebrate our 10th anniversary with two own songs created in collaboration with Isaac Haze and DJ C.S.P.
The limited 7“ on clear pink vinyl is pressed 150 times. The bundle contains the 7″ vinyl, one premium Russell Athletics T-Shirt and an ACAP cutout sticker.
Go support this project – the complete income of PANDA will be donated to the following social institutions:
• KreativWerkstatt & Atelier bhz
• Nachsorgeklinik Tannheim
• Viva con Agua

Bundle facts:
• 7″ on pink wax
• Download code
• Plastic sleeve
• Analog mastering
• 45 rpm
• Limited to 150 copies (120 for sale)
• Hand-numbered
• Heavy quality t-shirt
• Sticker included

Go to Item

L.I.E.S.

42,45 €* 49,95 € -15%

Plantasia "Plant Your Face" Baseball Jersey

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Cloud of Smoke S/S Tee is equipped with the following features:
• rib crew neck with interior tape
• L.I.E.S. Records branding printed on left chest
• Cloud of Smoke artwork printed on the rear
• regular/relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

Mort Garson

42,99 €*

12" Control Vinyl Performance-Serie

Available Sizes: S, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Mort Garson Plantasia "Plant Your Face" Baseball Jersey is equipped with the following features:
• contrast rib crew neck and raglan sleeves
• Plantasia "Plant Your Face" artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Serato

42,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

L.I.E.S. Statue L/S T-Shirt

L.I.E.S.

44,96 €* 59,95 € -25%

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Statue Longsleeve Tee's features include:
• rib crew neck with interior tape
• L.I.E.S. Statue artwork printed on front
• stretch rib cuffs
• additional Serious Jack Noise lettering printed on right sleeve
• relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

Presspop Inc.

Sun Ra Pocket T-Shirt

Available Sizes: M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

CELEBRATING THE FIRST 110 YEARS OF SUN RA 1914-2024
Pocket t-shirt to commemorate the launch of the SUN RA FIGURINE and the 110th anniversary of his birth.

Officially approved by the © Sun Ra LLC
© Archer Prewitt

The Presspop Inc. Sun Ra Pocket Tee is equipped with the following features:
• rib crew neck with interior tape
• Presspop Inc. Sun Ra Pocket artwork printed on front and back
• regular fit
• 100% cotton single jersey (6.0 oz, GILDAN)

Go to Item

1UP

One Love T-Shirt

Available Sizes: L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 1UP One Love Tee is equipped with the following features:
• rib crew neck with interior tape
• 1UP One Love graphic printed at left chest
• regular fit
• 100% organic cotton single jersey, 190 g/m²
• made in Portugal

Go to Item

Chef DOOM T-Shirt

Available Sizes: S, M, L, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

The MF Doom Chef DOOM Tee is equipped with the following features:

• Regular fit
• Heavy weight, 6.5 oz, 22-singles, 100% combed cotton
• Neck ribbing, side seamed, shoulder-to-shoulder tape, double needle hems, preshrunk
• Single-color screen printed front with a printed inner label
• Illustrations by Sam Rodriguez.

Go to Item

Black Star

Icon T-Shirt

Available Sizes: S, M, L, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Black Star Icon T-Shirt - Features:
• Regular fit
• Midweight, 5.3 oz, 28-singles, 100% combed cotton
• Neck ribbing, side seamed, shoulder-to-shoulder tape, double needle hems, preshrunk
• Flag icon sewn onto sleeve
• Single color print on front.

A portion of proceeds will go to savethechildren.org benefiting relief efforts in DRC, Sudan, Haiti and Gaza.

The artist formerly known as Mos Def, now Yasiin Bey, teams up with Talib Kweli again for a second Black Star album. This merch drops with the first widely available vinyl edition that is also available at HHV.

Go to Item

Sonic Youth

Nurse Hoodie

47,49 €* 49,99 € -5%

Emoji "Hands" 2x12" Picture Control Vinyl

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sonic Youth Nurse Hoodie's features include:
• drawstring-adjustable two-layer hood with metal eyelets
• Nurse artwork printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 80% cotton, 20% polyester brush-back fleece

Go to Item

Serato

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Emoji "Thinking/Crying" 2x12" Picture Control Vinyl

Serato

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Reloop

Ersatznadel VIBE

49,90 €*

Basketball ABC Classic Kids Sweatshirt

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

Go to Item

Awesome ABCs x The Dudes

Skateboard ABC Classic Kids Sweatshirt

Available Sizes: 3-4 YRS, 5-6 YRS, 7-8 YRS, 9-11 YRS

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

The Awesome ABCs x The Dudes Basketball ABC Classic Sweatshirt is equipped with the following features:
• rib crew neck with interior tape
• Basketball ABC Classic artwork printed on front
• stretch rib cuffs and bottom band
• regular fit
• 100% cotton

Go to Item

Awesome ABCs x The Dudes

Rap ABC Classic Kids Sweatshirt

Available Sizes: 3-4 YRS, 5-6 YRS, 7-8 YRS, 9-11 YRS

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

The Awesome ABCs x The Dudes Skateboard ABC Classic Sweatshirt is equipped with the following features:
• rib crew neck with interior tape
• Skateboard ABC Classic artwork printed on front
• stretch rib cuffs and bottom band
• regular fit
• 100% cotton

Go to Item

Awesome ABCs x The Dudes

Hello Nasty Sardine Can Cover T-Shirt

Available Sizes: 3-4 YRS, 5-6 YRS, 7-8 YRS, 9-11 YRS

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

The Awesome ABCs x The Dudes Rap ABC Classic Sweatshirt is equipped with the following features:
• rib crew neck with interior tape
• Rap ABC Classic artwork printed on front
• stretch rib cuffs and bottom band
• regular fit
• 100% cotton

Go to Item

Champion x Beastie Boys

Hello Nasty Intergalactic Photo T-Shirt

Available Sizes: L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The basic classic for sporty guys, including a vintage Beastie Boys print for an authentic retro look. Great quality and processing, nice shape.

The Champion x Beastie Boys Hello Nasty Sardine Tin Cover T-Shirt's features include:

• rib crew neck with interior tape
• Beastie Boys original graphic printed on front
• Champion C logo embroidered on left sleeve
• regular fit
• 100% combed cotton single jersey, 180 g/m²

Go to Item

Champion x Beastie Boys

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The basic classic for sporty guys, including a vintage Beastie Boys print for an authentic retro look. Great quality and processing, nice shape.

The Champion x Beastie Boys Hello Nasty Intergalactic Photo T-Shirt's features include:

• rib crew neck with interior tape
• Beastie Boys original graphic printed on front
• Champion C logo embroidered on left sleeve
• regular fit
• 100% combed cotton single jersey, 180 g/m²

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

12" Vinyl DJ-Bag

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Black Star

Flag T-Shirt

Nxworries (Anderson.Paak & Knxwledge)

Available Sizes: S, M, L, XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Black Star Flag T-Shirt - Features:
• Oversized fit
• Heavyweight, 7.1 oz, 16-singles, 100% carded cotton
• Dropped shoulders, wide neck ribbing with twin stitching, side seamed, shoulder-to-shoulder tape, double needle hems, garment dyed, preshrunk
• 5-color printed front design

A portion of proceeds will go to savethechildren.org benefiting relief efforts in DRC, Sudan, Haiti and Gaza.

The artist formerly known as Mos Def, now Yasiin Bey, teams up with Talib Kweli again for a second Black Star album. This merch drops with the first widely available vinyl edition that is also available at HHV.

Go to Item

Kawaii T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

NxWorries Why Lawd? Kawaii T-shirt in white. Designed by Knxwledge and Yosuke Ando for the 'X Records' LA album pop-up.

The NxWorries Kawaii Tee is equipped with the following features:
• rib crew neck with interior tape
• Kawaii artwork printed on left chest and on the rear
• regular fit
• 100% cotton single jersey
• limited edition

Go to Item

Available Sizes: S, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Simple, to the point, and with a strong message. A tribute to the greatest underground artist who made a powerful impact on hip hop during the last 20 years.

The MF Doom Throw Tee is equipped with the following features:

• rib crew neck with interior tape
• 2-color Doom artwork printed on chest
• oversized fit with dropped shoulders
• 100% cotton heavyweight single jersey, 8.2 oz (pre-shrunk to minimize shrinkage)

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

2LP | 2021 | EU (Ava Editions)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

The Beatles

Beatles In Tokyo

I Was So Far In I Was Out Long Sleeve

Release: 2021 / EU

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Used Vinyl

Medium: VG+, Cover: VG+

Limited Edition. No. 0331.
Small light scuff on side 2.
Inculdes poster and DVD in NM condition.
Obi included with small tear.
Hardcover book as new with a dented corner.

Go to Item

Feel Free Hi Fi

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Digital Sting I Was So Far In I Was Out Long Sleeve is equipped with the following features:
• rib crew neck with interior tape
• I Was So Far In I Was Out artwork printed on chest & back
• I Was So Far In I Was Out graphic printed on both sleeves
• stretch rib cuffs and bottom band
• regular fit
• 100% cotton single jersey

Hand printed in house on 100% cotton.

Go to Item

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Available Sizes: S, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Available Sizes: S, M, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Goldring

E1 Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Goldring E1 MM Cartridge

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery

• sturdy construction

• front pocket for cell phone

• accessories front compartment

• removable shoulder strap

• weight: approx. 1.090 g

Go to Item

12" Vinyl DJ-Bag

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

L.I.E.S.

Broken Heart L/S T-Shirt

50,95 €* 59,95 € -15%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The L.I.E.S. Broken Heart Longsleeve Tee's features include:
• rib crew neck with interior tape
• L.I.E.S. graphic printed on left chest
• stretch rib cuffs
• Broken Heart artwork printed on the rear
• relaxed fit
• 100% cotton heavyweight single jersey (Gildan tee)

Go to Item

DOOM 5 Panel Cap

50,99 €* 59,99 € -15%

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

For ages, a headgear item like the Rhymesayers MF DOOM five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Rhymesayers MF DOOM 5 Panel Cap is equipped with the following features:

• "DOOM" lettering on front panel
• flat visor
• adjustable nylon strap with side-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• woven GasDrawls sewn tag on inside
• 100% cotton twill

Go to Item

Suicidal Tendencies

Brick Baseball Jersey

54,99 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies Brick Baseball Jersey is the Venice version of a vintage baseball shirt, equipped with pinstripe details as well as a V neck, curved bottom hem, S.T. appliqué at left chest, plus Suicidal Brick artwork printed on the rear. Relaxed fit; 100% polyester.

Go to Item

Magma

LP-BAG 40 II

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

Scratch Stylus

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Go to Item

Aesop Rock X Blockhead

Litter Hoodie

55,24 €* 64,99 € -15%

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Aesop Rock X Blockhead Litter Hoodie´s features include:
• drawstring-adjustable two-layer hood with interior tape and metal eyelets
• Litter artwork printed on chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 70% ringspun cotton, 30% polyester brush-back fleece

Go to Item

Rollcontainer 12" Aufbewahrung (110)

56,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record Box stands for creative furniture that gives vinyl collectors the chance to create unique pieces of furniture for storing and presenting records. The Record Box roll container is a furniture piece that can be moved around the room.
The set consists of a 12-inch record box that stands on a rollboard. The box offers space for around 110 records. The storage box is connected to the rollboard by specially developed glue dots. The set can be used as side table, roll container, office container for folder storage, a coffee table or a mobile record shelf.
The set offers a price saving compared to buying the elements individually. It is ideal as a creative addition to individually built vinyl furniture from the Record Box system and is available in black and white.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x46cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x glue dots
• Assembly instructions
• Material: 15 mm MDF with melamine coating – white or black
• Boxes for self-assembly - screwdriver required!

Go to Item

Chi Modu

WYS Hoodie

58,45 €* 64,95 € -10%

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Chi Modu pays tribute to BK's finest who brought us some of the most deadly rhymes in hip-hop history.

The Chi Modu WYS Hoodie's features include:

• drawstring-adjustable two-layer hood with interior tape
• Biggie photo out of Chi Modu's archives printed on front
• kangaroo pocket
• stretch rib cuffs and bottom band
• Chi Modu signature printed on right sleeve
• relaxed fit
• 100% cotton brush-back fleece, 330 g/m²

Go to Item

Concorde MkII SCRATCH Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

Go to Item

ATH-SQ1TW

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

Go to Item

MFS Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Go to Item

ATN-XP5 Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP5
REPLACEMENT STYLUS FOR AT-XP5 CARTRIDGE
Elliptical bonded stylus
Carbon ABS cantilever
Durable design for DJ application

Go to Item

Concorde MkII DIGITAL Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DIGITAL

Attention: Matches the new Concorde MkII only!

Go to Item

Stokyo

Black Box Cartridge Case

59,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Degritter

7" Record Adapter

60,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Adapter for cleaning 7″ records with Degritter record cleaning machine.

Go to Item

Stokyo

Kutter

62,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Der Kutter ist das ideale Übungstool für alle Turntablists, die auch unterwegs nicht darauf verzichten wollen, an ihren Routines zu feilen. Im Gegensatz zum Frisk Fader verfügt der Kutter über zwei Audioeingänge, wobei Kanal 2 auf „through“ gestellt werden kann um die Musik im Hintergrund auch bei bewegtem Fader durchlaufen zu lassen. Der Kutter bietet eine Crossfader-Reverse-Funktion, auch bekannt als Hamsterswitch. Das kratzfeste Gehäuse verfügt über ein elegant schlankes Design und funktioniert dank der analogen Schaltung ohne Batterien. Über den Audio Ausgang wird der Kutter beispielsweise an eine Stereoanlage oder einen aktiven Lautsprecher angeschlossen. Drei Miniklinke-Kabel gehören zum Lieferumfang.

Features
⦁ Transportabler Crossfader
⦁ inkl. 3x Miniklinke-Kabel und Klettband zur fixierung
⦁ Stereofader (Cuts auf beiden Seiten)
⦁ 2 Eingänge
⦁ 1 Ausgang
⦁ Hamsterswitch (Crossfader-Reverse)
⦁ Post-/Throughfader (Kanal 2)
⦁ Schlankes Design
⦁ Top-Panel ohne störende Schrauben (auf Unterseite geschraubt)
⦁ Betrieb ohne Batterien
⦁ Designed by STOKYO Japan
⦁ Montiert in Japan
⦁ Verpackung aus wiederverwertetem Material
⦁ Farbe: rot

Lieferumgang:
Kutter, 3 Miniklinke-Kabel, Anleitung, Klettband
Abmessungen: 40 x 78 30mm
Gewicht: 40g

Go to Item

Pro-Ject

Connect it LS S2 (400cm)

65,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

Stylus 2M Red

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical data:
• Frequency range 20-22.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Red
• Recommended for following cartridges 2M Red / 2M Red Verso(Interchangeable with 2M Blue / 2M Blue Verso)

Go to Item

Stylus Concorde Music Red

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

Go to Item

Teenage Engineering

OB-4 Mesh Bag

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Teenage Engineering

Field Bag (OP-Z) Medium

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Nagaoka

JN-P100 - Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

Go to Item

DigiTrack Limited Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

Go to Item

DigiTrack Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The world's first needle designed specifically for coded vinyl with low wear!

The DigiTrack is the perfect marriage of easy and function. You can now manupulate MP3's with the style and feel of a turntablist and the tradition of a turntable.

The DigiTrack responds to the generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

High output and the best mix and scratch ability!

Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +3 dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
• -
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
•
Internal impedance, DC resistance
•
Internal inductance
•
Recommended load resistance
•
Recommended load capacitance
•
Cartridge weight
18,5 g

Go to Item

Pop Trading Company

Corn Skateboard

69,95 €*

Ultimate Height Adjustable Laptop Stand

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Pop Trading Company Corn Skateboard is an 8.375 inch wide deck made in china by Dwindle from 7-ply Canadian maple, equipped with a seasonal POP graphic. Attention: The stain color may vary!

Go to Item

UDG

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

Go to Item

ATH-S220BT

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Experience exceptional sound clarity with Audio-Technica's ATH-S220BT wireless headphones, featuring up to 60 hours’ battery life and multipoint connectivity.

ATH-S220BT are lightweight, relaxed-fit headphones built to provide extended comfort. Weighing in at just 180g (6.3 oz) - around the same weight as a 12" vinyl record - the ATH-S220BT headphones’ intelligent design helps prevent neck and shoulder strain so you can enjoy album after album or gaming sessions with friends.

From listening to your favourite tunes through your smartphone to browsing the latest viral videos on a laptop or tablet, you’ll experience powerful sound from every source.

Since 1962, Audio-Technica has been devoted to providing listeners with the very best in sound quality and there’s no compromise to that dedication when it comes to our truly immersive ATH-S220BT best budget wireless headphones

These affordable wireless headphones also have a quick charge feature - they can be charged in ten minutes for 3.5 hours of listening time. Plus, with a USB type A to USB Type C™ cable included, you’re able to charge with ease using a variety of different devices.

If you’re looking for the best headphones under £100, look no further. Incorporating an abundance of features, the ATH-S220BT headphones are also compatible with both Siri and Google Assistant, so you’re able to access your device’s speech recognition function at the touch of a button. Receive notifications, send messages and control your audio playback without lifting a finger.

Features:

60 Hr Battery
The Audio-Technica ATH-S220BT is an ideal choice for those looking for Bluetooth headphones with a long battery life – making them a reliable travel companion or top selection for settling down to listen to your favourite album or podcast.

Multipoint Pairing
Connect to your smartphone, PC or tablet simultaneously and take the stress away from having to switch between multiple devices.

Built-In Mic and Controls
You’ll experience exceptionally clear audio thanks to the ATH-S220BT’s high-quality built-in microphone.

Wired and Wireless Listening
For a wired audio experience, use the included 1.2m cable. With a built-in microphone and remote, the plug-in option provides the ultimate flexibility for those wishing to experience superior sound whilst conserving battery power.

Immediate Voice Sync on Videos
Whether you’re watching TikTok videos on your daily commute or enjoying the latest Netflix series, even the slightest audio lag can impact your experience. With low latency mode on the Audio-Technica ATH-S220BT, you can enjoy minimal sound delay and crystal-clear audio.

• Up to 60 hours of continuous use on a full charge and up to 3.5 hours of use on a 10-minute rapid charge (via USB-C connection)
• Slim housings with sleek, lightweight earpads exert less pressure on your ears for a comfortable fit with good sound isolation
• 40 mm drivers provide powerful audio reproduction from a Bluetooth wireless signal
• Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
• Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
• High-quality, built-in microphone ensures crystal-clear calls
• Easy-touch buttons in the earcup provide intuitive control of volume, music/video playback, and calls, and give you access to Siri and Google Assistant
• Google Fast Pair lets you quickly pair headphones with an Android smartphone or other device
• Voice guidance function provides helpful notifications, including power and pairing status, and remaining battery level
• Includes 1.2 m (3.9") cable with in-line mic and control for optional wired connection

Specifications:
• Type: Closed‐back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 - 32,000 Hz
• Sensitivity: 105 dB/mW
• Impedance: 32 ohms
• Battery: DC 3.7 V lithium polymer battery
• Battery Life: Approx. 60 hours continuous use (music playback)
• Weight: Approx. 180 g (6.3 oz)
• Charging Time: Approx. 4 hours
• Cable: Detachable 1.2 m iS controller cable with mic
• Connector: 3.5 mm (1/8″) stereo mini
• Microphone Type: Electret condenser
• Microphone Sensitivity: ‐42 dB (1 V/Pa, at 1 kHz)
• Microphone Frequency Response: 50 - 4,000 Hz
• Microphone Polar Pattern: Omnidirectional
• Accessories Included: USB charging cable (30 cm (12”), USB Type‐A / USB Type‐C) cable with in‐line mic and control (1.2 m (3.9’) /3.5 mm (1/8”) gold‐plated stereo mini‐plug (4 pole/L‐shaped))
• Bluetooth® Version: Bluetooth version 5.0
• Operating Range: Line of sight ‐ approx. 10 m (33')

Go to Item

Zomo

VS-Rack Loft

69,99 €*

JDDPTA-PCB Tone Arm (incl. pre-amp)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Brand new from Zomo: The vinyl stand Zomo VS-Rack "Loft" is an innovative and elegant way to store your vinyl records in a modern design.
The vinyl stand is not only used to store your favourite vinyl treasures, but also as a decorative element it is a great eye-catcher for any living room.
The material is made of powder-coated steel and combines durability with timeless design.

Features:
• Offers space for 45-50 LPs (depending on the thickness of the vinyl)
• Innovative, elegant design
• An eye-catcher in every apartment
• Powder-coated steel
• High quality from Zomo

Technical specifications:
• Dimensions (W x D x H): 233 x 333 x 253 mm
• Weight: 1,2 kg

Go to Item

Jesse Dean Designs

71,99 €*

JDDX2RS-A Numark PT01 Scratch Fader

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Go to Item

Jesse Dean Designs

71,99 €*

JDDX2RS-A Numark PT01 Scratch Fader

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Go to Item

Jesse Dean Designs

71,99 €*

Hello Nasty Crewneck Sweater

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Champion x Beastie Boys

74,96 €* 99,95 € -25%

World's Smallest Portable Record Player (V2.0)

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Champion x Beastie Boys Hello Nasty Soft Fleece Crewneck Sweatshirt's features include:

• rib crew neck with interior tape
• self-fabric side panels
• stretch rib cuffs and bottom band
• Beastie Boys lettering printed on left chest
• Beastie Boys Hello Nasty artwork printed on the rear
• Champion "C" logo embroidery at left cuff
• regular fit
• 86% cotton, 14% polyester heavyweight TCV reverse weave brush-back fleece, 400 g/m²

Go to Item

Record Runner

75,99 €* 79,99 € -5%

Disco-Antistat Schallplatten-Waschgerät - Generation 2 PLUS (Set)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Go to Item

Knosti

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

Go to Item

Rollcontainer 12" Aufbewahrung (110) & (100)

79,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With the set of roll container, register and storage boxes, Record Box is making an attractive offer for passionate vinyl collectors: Buying a set represents a price advantage compared to buying the components individually and offers an uncomplicated and individual solution for the mobile storage of records and more.
When developing the Record Box furniture system, the specific needs of vinyl collectors were directly taken into account. In this way, the storage box and the register box can be easily attached to the rollboard and added to a piece of furniture that is as practical as it is attractive. The register box is the top end and invites you to leaf through the records stored in it.
The three modular pieces are connected using specially developed glue dots that can be easily removed at any time. In the blink of an eye you can create a side table, a roll container, coffee table or record shelf that can be moved freely around the room.
The furniture is made of high quality MDF with a robust melamine coating and offers an attractive price-performance ratio.
The set is available in black and white, offering space for around 200 records and, like the other modules of the Record Box furniture system, is used to implement creative and individual solutions for vinyl storage and presentation.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x78cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x 12-inch 100 register box
• 1x connecting elements glue dots from »Record Box«
• Assembly instructions
• Material: 15 mm MDF with melamine coating - white or black
• Boxes for self-assembly - screwdriver required!

Go to Item

DOOM's Diner Old Dad Hat

79,99 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-15

The MF Doom DOOM's Diner Old Dad Hat is equipped with the following features:

• Lightweight, 100% cotton
• Mid profile, five-panel cap, curved peak, plastic snapback, tonal eyelets
• Three-color embroidered front, two-tone snapback
• One size fits all
• Illustrations by Sam Rodriguez.

Go to Item

Glorious

Record Box 230

Teenage Engineering x Cheap Monday

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

Go to Item

Pocket Operator PO-32 Tonic (8-bit Synthesizer und Sequencer)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Qbert

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Go to Item

AT-XP5

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

Go to Item

Schallplattenturm (2x110 & 1x100)

89,99 €*

Manchester Turntable Stand

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg

Go to Item

Crosley

89,99 €*

Show And Listen Flip Frame (Pack of 4)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - White Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Go to Item

Display Your Records

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

Go to Item

Akai

MIDImix

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Total Mixing Performance in a Small Package
MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you’d like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved!
Akai Professional’s portable MIDImix solves this problem completely. With Akai Professional’s famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer’s settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW’s functionality. This is great—it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like it
Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site—at the same time.

Midi mixer to control virtually any DAW
8 individual line faders, 1 master fader
24 knobs, arranged 3 per channel
16 buttons arranged in 2 banks provide mute, solo and record arm functionality per channel
Sends all mixer settings to the DAW with a single button press
1 to 1 mapping with Ableton Live (Ableton Live Lite included)

Requirements:
Macintosh: 1.25 GHz G4/G5 or faster (Intel Mac recommended); 1GB RAM (2GB recommended); Mac OS X 10.4.11 (10.5 or later recommended)
PC: 1.5 GHz Pentium 4 Celeron-compatible CPU or faster (multicore CPU recommended); 1 GB RAM (2GB recommended); Windows 8, Windows 7, Windows Vista, or Windows XP; Windows-compatible sound card (ASIO driver support recommended); QuickTime recommended
Available USB port

Manual: http://6be54c364949b623a3c0-4409a68c214f3a9eeca8d0265e9266c0.r0.cf2.rackcdn.com/1415/documents/MIDImix-UserGuide-v1.0.pdf

Go to Item

Throw Sweatpants

97,99 €* 139,99 € -30%

Available Sizes: S, M, L, XL, 2XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MF Doom Throw Sweatpants's features include:
• cut & sew custom dyed construction
• elastic, drawstring-adjustable waistband with sturdy eyelets plus aglets including debossed Doom branding
• 2 side-entry front pockets
• welt pocket at wearer’s right rear
• drawstring-adjustable leg opening hemlines with sturdy eyelets
• MF Doom Mask logo embroidered at upper left leg
• brushed interior
• relaxed fit
• 80% cotton, 20% polyester fleece, 450 g/m²

Go to Item

2MR Red

99,00 €*