HHV Records White 441 Items

Forever Tour '97 T-Shirt

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan Forever Tour '97 Tee is equipped with the following features:
• rib crew neck with interior tape
• distressed Forever Tour '97 artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

The Beatles

Nothing Is Real T-Shirt

17,99 €* 19,99 € -10%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beatles Nothing Is Real Tee is equipped with the following features:
• rib crew neck with interior tape
• Nothing Is Real artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Scratch Stylus

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Scratch White stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 g / 5g

Compatible with cartridges: OM Scratch White

Go to Item

OM Qbert

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Q.Bert for scratch and back-cueing
• High tracking ability, unsurpassed handling
• Ultra high output!
• Low wear characteristics that literally put it in a class of its own

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Technical Data
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

Go to Item

OM Scratch x SH-4 Headshell Blue

139,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

OM Scratch White pre-mounted on SH-4 Blue headshell
The OM Scratch White on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.

Features:
• Universal mount fitting a wide range of S-shaped tonearms
• Correct Baerwald alignment with the major part of tonearms with universal mount
• Spherical stylus minimizes scratching
• Increased tracking ability
• Reinforced rubber suspension

High output and maximum scratch performance guaranteed!

OM Scratch White technical data
Stylus Type Spherical
Tracking Force 4.0 g (40 mN)
Output Voltage 7 mV
Frequency Range 20-15.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°

Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
OM cartridge weight - 5 g
OM pre-mounted on SH-4 weight incl. screws - 14,5 g

Replacement stylus unit - Scratch White

Go to Item

DigiTrack Limited Stylus

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

Go to Item

MFS Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Go to Item

Concorde MkII Fingerlift

9,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Exchangeable reinforced finger lift for Concorde MkII series
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange, Yellow and White colors which is perfect to personalize the cartridge the way you want it.

Go to Item

Pulp Fiction

Bad M Fucker T-Shirt

7,99 €* 19,99 € -60%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Pulp Fiction Bad M Fucker T-Shirt's features include:
• rib crew neck with interior tape
• Bad M Fucker artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Sick Of It All

Pete T-Shirt

21,99 €*

Sign O' The Times T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sick Of It All Pete T-Shirt's features include:
• rib crew neck with interior tape
• SOIA Pete artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Prince

21,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Prince Sign O' The Times T-Shirt's features include:
• rib crew neck with interior tape
• Sign O' The Times artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Obey Records

Supreme Cuts Slipmat

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Go to Item

Los Retros

Los Retros T-Shirt

24,69 €* 25,99 € -5%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Los Retros T-Shirt's features include:
• rib crew neck with interior tape
• Los Retros artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

VNL

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \ Stylus

35,10 €* 39,00 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL \ compliance, dynamic lateral 16 μm/m N - Flexible

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm

VNL I 16 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\ Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL II compliance, dynamic lateral 15 μm/m N - Rigid

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL II 90 μm

VNL II 15 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

VNL \\\ Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus for Ortofon VNL.

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

VNL III compliance, dynamic lateral 14 μm/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL III 90 μm

VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

Go to Item

Retrogott

Tag T-Shirt

22,99 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Retrogott Tag Tee is equipped with the following features:
• rib crew neck with interior tape
• Retrogott Tag artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Suicidal Tendencies

Brick Baseball Jersey

54,99 €*

Check Your Head Photo T-Shirt

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Suicidal Tendencies Brick Baseball Jersey is the Venice version of a vintage baseball shirt, equipped with pinstripe details as well as a V neck, curved bottom hem, S.T. appliqué at left chest, plus Suicidal Brick artwork printed on the rear. Relaxed fit; 100% polyester.

Go to Item

Beastie Boys

Available Sizes: S, M, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys Check Your Head Photo Tee is equipped with the following features:
• rib crew neck with interior tape
• Check Your Head Photo artwork printed on front
• Check Your Head lettering printed on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Sichtexot

Logo Slipmat

12,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sichtexot "Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Go to Item

Stones Throw

Tilted Logo T-Shirt

26,99 €*

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Stones Throw Tilted Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• oversized Stones Throw Tilted Logo printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Public Enemy

4Logos T-Shirt

20,99 €*

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Public Enemy 4Logos Tee is equipped with the following features:
• rib crew neck with interior tape
• 4Logos artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Freddie Mercury

Mask T-Shirt

21,59 €* 23,99 € -10%

Ready To Die Tracklist T-Shirt

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Freddie Mercury Mask Tee is equipped with the following features:
• rib crew neck with interior tape
• Mask artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

The Notorious B.I.G.

25,99 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Notorious B.I.G. Ready To Die Tracklist Tee is equipped with the following features:
• rib crew neck with interior tape
• "The Notorious BIG / Ready To Die" lettering printed at left chest
• Ready To Die Tracklist artwork printed on the rear
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

Ice Cube

Logo T-Shirt

16,19 €* 26,99 € -40%

Stankonia Oversize T-Shirt

Available Sizes: S, M, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ice Cube Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Ice Cube Logo printed on front
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

OutKast

29,90 €*

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The OutKast Stankonia Oversize Tee is equipped with the following features:
• rib crew neck with interior tape
• Stankonia artwork printed on front
• loose fit
• 100% cotton single jersey, 240 g/m²

Go to Item

2Pac

F*ck The World T-Shirt

21,59 €* 26,99 € -20%

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2Pac F*ck The World T-Shirt's features include:
• rib crew neck with interior tape
• F*ck The World artwork printed on front
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

Criminal Minded

Boogie Down Jersey

30,39 €* 75,99 € -60%

Schallplatten Wandleiste aus Holz

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Criminal Minded Boogie Down Jersey is equipped with the following features:
• rib crew neck with interior tape
• curved Boogie Down appliqué with embroidered details at chest
• OkayPlayer Authentics woven label at bottom left
• curved bottom hem with side notches
• South South Bronx patch plus OKP logo embroidery at left sleeve
• rib cuffs with yarn dyed contrast stripe details
• 1 team number appliqué on the rear
• relaxed fit
• 100% cotton single jersey

Go to Item

Vinyl Display

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sacred Bones

Logo T-Shirt

23,74 €* 24,99 € -5%

Sacred Bones x Cristina Daura

Available Sizes: S, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sacred Bones Logo T-Shirt's features include:
• rib crew neck with interior tape
• golden SB logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Sacred Bones Logo T-Shirt

24,29 €* 26,99 € -10%

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sacred Bones x Cristina Daura Sacred Bones Logo T-Shirt's features include:
• rib crew neck with interior tape
• Cristina Daura's alternate Sacred Bones logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Ultimate Audio Cable USB 2.0 A-B Straight 1m

12,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Go to Item

Ultimate Audio Cable USB 2.0 A-B Angled 1m

12,99 €*

Indigo Sparke x Emma Kohlmann T-Shirt

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Indigo Sparke

28,49 €* 37,99 € -25%

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Produced in celebration of Indigo Sparke's full length album Echo, these four-color double sided tees and were designed by the inimitable artist Emma Kohlmann.

The Indigo Sparke x Emma Kohlmann Tee is equipped with the following features:

• rib crew neck with interior tape
• Indigo Sparke artwork by Emma Kohlmann silkscreen-printed on front and rear
• regular fit
• 100% cotton single jersey

Go to Item

Popeye

Standing T-Shirt

17,24 €* 22,99 € -25%

Available Sizes: S, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Popeye Standing Tee is equipped with the following features:
• rib crew neck with interior tape
• Popeye Standing artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Megaloh

21 Crown T-Shirt

18,74 €* 24,99 € -25%

Bugs Bunny Basketball T-Shirt

Available Sizes: M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Megaloh 21 Crown Tee is equipped with the following features:
• rib crew neck with interior tape
• 21 Crown artwork printed on front
• Megaloh branding printed at top rear
• regular fit
• 100% cotton single jersey

Go to Item

Space Jam

24,29 €* 26,99 € -10%

Available Sizes: 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Space Jam Bugs Bunny Basketball Tee is equipped with the following features:
• rib crew neck with interior tape
• Bugs Bunny Basketball artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Brand Nubian

One For All T-Shirt

35,99 €*

Available Sizes: S, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Brand Nubian One For All Tee is equipped with the following features:
• rib crew neck with interior tape
• One For All artwork printed on front
• relaxed fit
• 100% cotton single jersey

Go to Item

Benny Sings

Benny Sings T-Shirt

12,79 €* 31,99 € -60%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Benny Sings Tee is equipped with the following features:
• rib crew neck with interior tape
• Benny Sings artwork printed on left chest and on the rear
• regular fit
• 100% cotton single jersey

Go to Item

Green Day

Flower Pot Babygrow

15,19 €* 15,99 € -5%

Available Sizes: 3-6 MTH, 12 MTH, 18 MTH, 0-3 MTH, 6-9 MTH, 24 MTH

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Green Day Flower Pot Babygrow is a romper suit made from single jersey, equipped with ringer crew neck and ringer bordering, Flower Pot artwork printed on front as well as triple snap button closure at the crotch. 100% cotton.

Go to Item

Guns N' Roses

Classic Logo Babygrow

14,39 €* 15,99 € -10%

Available Sizes: 24 MTH

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Guns N' Roses Classic Logo Babygrow is a romper suit made from single jersey, equipped with ringer crew neck and ringer bordering, Classic Logo artwork printed on front as well as triple snap button closure at the crotch. 100% cotton.

Go to Item

Syd Barrett

Swirly Portrait T-Shirt

20,99 €*

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Syd Barrett Swirly Portrait Tee is equipped with the following features:
• rib crew neck with interior tape
• Swirly Portrait artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Keith Haring

Barking Dog T-Shirt

30,39 €* 31,99 € -5%

Available Sizes: S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Keith Haring Barking Dog Tee is equipped with the following features:
• rib crew neck with interior tape
• Barking Dog artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Feathers Slipmat

13,99 €* 19,99 € -30%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sun Mask #1 Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sun Mask #2 Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sun Mask #3 Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Opek

Corners T-Shirt

28,49 €* 29,99 € -5%

Available Sizes: S, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Opek Corners Tee is equipped with the following features:
• rib crew neck with interior tape
• Corners artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Sa-Roc

Smudge Women T-Shirt

27,74 €* 36,99 € -25%

Available Sizes: GIRLS S, GIRLS M, GIRLS L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sa-Roc Smudge Tee is equipped with the following features:
• rib crew neck with interior tape
• Smudge artwork printed on chest
• slim fit
• 100% cotton single jersey

Go to Item

Sa-Roc

Smudge T-Shirt

36,99 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Sa-Roc Smudge Tee is equipped with the following features:
• rib crew neck with interior tape
• Smudge artwork printed on chest
• regular fit
• 100% cotton single jersey

Go to Item

Cable USB 2.0 C-B Straight 1,5m

17,99 €*

Gucci Piggy (Back Print) T-Shirt

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Length 1.5 m | 4.92 ft
Weight 0,10 kg / 0.22 lbs
Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 C-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Go to Item

Radiohead

14,29 €* 21,99 € -35%

Trapped (Back Print) T-Shirt

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Radiohead Gucci Piggy Tee is equipped with the following features:
• rib crew neck with interior tape
• Gucci Piggy artwork printed on front and back
• additional graphic printed at top rear
• regular fit
• 100% organic cotton single jersey

Go to Item

Radiohead

21,99 €*

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Radiohead Trapped Tee is equipped with the following features:
• rib crew neck with interior tape
• Trapped artwork printed on front and back
• regular fit
• 100% organic cotton single jersey

Go to Item

Lil Nas X

Vertical Text Longsleeve

22,49 €* 24,99 € -10%

Available Sizes: S, M, L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Lil Nas X Vertical Text Longsleeve Tee is equipped with the following features:
• rib crew neck with interior tape
• Vertical Text artwork printed on left front
• stretch rib cuffs
• regular fit
• 100% cotton single jersey

Go to Item

The Rolling Stones

Vintage 70s Logo T-Shirt

Available Sizes: S, M, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Rolling Stones Vintage 70s Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Rolling Stones Vintage 70s Logo printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Czarface

Czar Noir T-Shirt

Available Sizes: XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Czarface Czar Noir Tee is equipped with the following features:
• rib crew neck with interior tape
• Czar Noir artwork printed on front
• regular fit
• 100% cotton single jersey, 6 oz, with super soft hand feel

Go to Item

Aesop Rock X Blockhead

Litter Hoodie

55,24 €* 64,99 € -15%

Available Sizes: XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Aesop Rock X Blockhead Litter Hoodie´s features include:
• drawstring-adjustable two-layer hood with interior tape and metal eyelets
• Litter artwork printed on chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• relaxed fit
• 70% ringspun cotton, 30% polyester brush-back fleece

Go to Item

2Pac

A River ... T-Shirt

14,99 €* 19,99 € -25%

Available Sizes: S, M, L, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 2Pac A River ... Tee is equipped with the following features:
• rib crew neck with interior tape
• A River ... artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Jefferson Airplane

Lips T-Shirt

Available Sizes: L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Jefferson Airplane Lips Tee is equipped with the following features:
• rib crew neck with interior tape
• Lips artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Mutombo

Mutombo Comic T-Shirt

23,99 €* 29,99 € -20%

Available Sizes: L, XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Mutombo Comic Tee is equipped with the following features:
• rib crew neck with interior tape
• Mutombo Comic artwork printed on chest and the rear
• relaxed fit
• 100% cotton single jersey, Heavy Organic Cotton

Go to Item

Sophia Kennedy

Monsters T-Shirt

25,19 €* 27,99 € -10%

Available Sizes: XS, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sophia Kennedy Monsters T-Shirt - Features:
• rib crew neck
• Front print of the Monsters T-Shirt artwork
• relaxed fit
• 100% cotton

Go to Item

Sophia Kennedy

Monsters Hoodie

21,99 €* 54,99 € -60%

Available Sizes: XS, S, M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sophia Kennedy Monsters Hoodie - Features:
• two-layer, drawstring-adjustable hood
• Sophia Kennedy logo printed centrally on the chest
• raglan sleeves
• stretch rib cuffs and bottom band
• Monsters Hoodie artwork printed on back
• brushed interior
• relaxed fit
• 100% cotton

Go to Item

Blueprint

Cover T-Shirt

19,19 €* 23,99 € -20%

Tumbling Blocks 45 Adaptor

Available Sizes: L, XL, 3XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Blueprint Cover Tee is equipped with the following features:
• rib crew neck with interior tape
• Blueprint Cover artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Love And Victory

17,99 €*

World's Smallest Portable Record Player (Bluetooth Version)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Flair for your vinyl. Slide one of our weighted 45 rpm adaptors onto the spindle of your turntable to play your favorite 7”. The heavy duty enameled metal disc comes packaged in our custom muslin pouch, perfect for toting along to a party or your next spin session.

Go to Item

Record Runner

99,99 €*

LP | 2021 | EU | Original (Cleopatra)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

BT-Version! Now with Bluetooth!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• NEW with Blutooth
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Go to Item

Screams For Tina

26,99 €*

Release: 2021 / EU – Original

Genre: Rock & Indie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

2LP | 2021 | EU (Ava Editions)

The Beatles

Beatles In Tokyo

49,99 €*

Release: 2021 / EU

Genre: Electronic & Dance

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Used Vinyl

Medium: VG+, Cover: VG+

Limited Edition. No. 0331.
Small light scuff on side 2.
Inculdes poster and DVD in NM condition.
Obi included with small tear.
Hardcover book as new with a dented corner.

Go to Item

Beastie Boys

Marker Logo T-Shirt

CLV-30 - Record Cleaning Cloth

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys Marker Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• Marker Logo artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Nagaoka

19,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

Go to Item

T1 (Ortofon OM 5E)

350,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

Go to Item

T1 Phono SB (Ortofon OM 5E)

426,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Go to Item

Debut Carbon EVO (Ortofon 2M Red)

569,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

Go to Item

Ultimate Height Adjustable Laptop Stand

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

Go to Item

Beastie Boys

B&W Logo T-Shirt

Available Sizes: S, L, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Beastie Boys B&W Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• black Beastie Boys logo printed on chest
• regular fit (unisex fit)
• 100% cotton single jersey

Go to Item

Audio-Technica

ATH-SQ1TW

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

Go to Item

Dragon T-Shirt

29,99 €*

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan Dragon T-Shirt's features include:
• rib crew neck with interior tape
• Wu-Tang Clan W logo printed on left chest
• Dragon artwork printed on back
• regular fit
• 100% cotton single jersey (180 gsm)

Go to Item

Dripping Logo T-Shirt

22,49 €* 24,99 € -10%

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan Dripping Logo T-Shirt's features include:
• rib crew neck with interior tape
• Wu-Tang Clan Dripping Logo artwork printed on front
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

Fear And Loathing

Logo T-Shirt

22,99 €*

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Fear And Loathing Logo T-Shirt's features include:
• rib crew neck with interior tape
• Fear And Loathing Logo artwork printed on front
• regular fit
• 100% cotton single jersey (160 gsm)

Go to Item

Split Logo T-Shirt

24,99 €*

Available Sizes: S, M, XL, 2XL

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Wu-Tang Clan Split Logo T-Shirt's features include:
• rib crew neck with interior tape
• Wu-Tang Clan Split Logo artwork printed on front
• regular fit
• 100% cotton single jersey, 180 g/m²

Go to Item

Glorious

Record Rack 330

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Record Rack 330 is an advanced 2-piece vinyl station, which was originated by combining the Record Box 230 with the Record Box Advanced 110 and it can hold up to 330 12''-records.

Direct access to records
Thanks to its slanted sides, quick access to the records is possible. The Record Rack 330 is therefore ideally suited for record stores and DJs who need direct access to their records or the home vinyl collection.

Especially stable construction
Compared to conventional furniture solutions, the rack offers an especially stable construction and is also very easy to set up.

Record Box Display Door
With the perfectly designed Record Box Display Door, you can also extend your Record Rack to protect your record compartments from dust and light, as well as to elegantly highlight your vinyl covers.

Clearly arranged
The clearly arranged storage solution is made of robust wood and is available with black or white finish.

Features:
• Advanced vinyl station with 2-piece layout
• Combination of Record Box Advanced 110 and Record Box 230
• Holds up to 330 12''-records
• Slanted sides for quick access to records
• Especially stable construction, unlike traditional furniture solutions
• Easy set-up in just a few simple steps
• Matches the look of the Mix Station and Mix Extension
• Available with black or white finish
• Supplied without decoration (12''-records)
• Extendable with the Record Box Display Door to keep the record compartments closed and to artfully hang up your vinyl covers

Technical Data:
• Material: MDF wood
• External dimensions: 356 x 956 x 342 mm (L x H x W)
• Weight: 12.7 kg

Go to Item

Reloop

Knob Cap Set

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Reloop Knobs bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple caps are a great addition to your set-up. Supplied in packs of 8, they're also perfectly complemented by Reloop's new Fader Caps. Customise your gear and stand out from the crowd.

FEATURES
• 8 knob caps
• Suitable for all potentiometers with d-shaft
• Rubber coating for tight grip
• Ergonomic knob cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 20 g (packaging unit)
• Dimensions: 7 x 12 x 7 mm

Go to Item

Reloop

Fader Cap Set

14,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Reloop Fader Caps bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple fader caps are a great addition to your set-up. Supplied in packs of 5, they're also perfectly complemented by Reloop's new Knob Caps. Customise your gear and stand out from the crowd.

FEATURES
• 5 fader caps
• Rubber coating for tight grip
• Ergonomic fader cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with the most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 14 g (packaging unit)
• Dimensions: 15 x 8 x 3 mm

Go to Item

Glorious

CD Box 90

36,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Holds up to 90 slim cases or 62 jewel cases - perfectly fitting the Record Box look. The solid construction even allows wall mounting. These CD boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Features:
• Holds up to 90 slim cases or 62 jewel cases
• Combination system: Easy stacking with other CD Boxes
• With divider (45 CDs per compartment)
• Matches the look of Mix Station and Mix Extension
• Wall mounting possible
• Supplied without decoration (i.e. CDs)

Technical Data:
• Material: solid MDF wood
• Dimensions: 705 x 155 x 170 mm
• Weight: 4.4 kg

Go to Item

Descendents

9th & Walnut T-Shirt

18,39 €* 22,99 € -20%

CL-120 Argento - Vinyl Record Velvet Brush

Available Sizes: L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Descendents 9th & Walnut Tee is equipped with the following features:
• rib crew neck with interior tape
• 9th & Walnut artwork printed on front
• regular fit
• 100% cotton single jersey

Go to Item

Nagaoka

19,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The tightly woven velvet on the brush surface is ideal for cleaning the sound grooves of the record and also enhances the cleaning effect. Fine dust adhering to the record is removed. In addition to the CL-120 velvet brush, a special brush is supplied to keep the cleaning surface of the brush clean.

Go to Item

Typ 8W Rundriemen

26,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 (Ortofon OM 5E)

299,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

E1 Phono (Ortofon OM 5E)

329,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

All My Favorite Rappers Are Dead T-Shirt

32,29 €* 37,99 € -15%

Available Sizes: M, L

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new 101 Apparel tees are made from US American cotton, so this textile is beefy, durable, and absorbent, and is virtually shrink free as a result of garment dyeing. The garment is washed with natural enzymes, resulting in a broken-in feel, just like a t-shirt that was washed or worn for a decade or two. Its special features include its heavy and sturdy feel and combined with a more generous fit and higher neck line.

The 101 Apparel All My Favorite Rappers Are Dead T-Shirt's features include:

• rib crew neck with interior tape
• cassette graphic printed on chest
• All My Favorite Rappers Are Dead artwork printed on the rear
• 101 Apparel clip label at bottom hem
• relaxed fit
• 100% cotton single jersey
• made in USA

Go to Item

Beat Selecter T-Shirt

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new 101 Apparel tees are made from US American cotton, so this textile is beefy, durable, and absorbent, and is virtually shrink free as a result of garment dyeing. The garment is washed with natural enzymes, resulting in a broken-in feel, just like a t-shirt that was washed or worn for a decade or two. Its special features include its heavy and sturdy feel and combined with a more generous fit and higher neck line.

The 101 Apparel Beat Selecter T-Shirt's features include:

• rib crew neck with interior tape
• Beat Selecter branding printed on left chest
• Beat Selecter artwork printed on the rear
• 101 Apparel clip label at bottom hem
• relaxed fit
• 100% cotton single jersey
• made in USA

Go to Item

Pirate Radio T-Shirt

Available Sizes: S

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new 101 Apparel tees are made from US American cotton, so this textile is beefy, durable, and absorbent, and is virtually shrink free as a result of garment dyeing. The garment is washed with natural enzymes, resulting in a broken-in feel, just like a t-shirt that was washed or worn for a decade or two. Its special features include its heavy and sturdy feel and combined with a more generous fit and higher neck line.

The 101 Apparel Pirate Radio T-Shirt's features include:

• rib crew neck with interior tape
• Pirate Radio artwork printed on front and rear
• 101 Apparel clip label at bottom hem
• relaxed fit
• 100% cotton single jersey
• made in USA

Go to Item

Shapes And Sounds T-Shirt

Available Sizes: S, M

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new 101 Apparel tees are made from US American cotton, so this textile is beefy, durable, and absorbent, and is virtually shrink free as a result of garment dyeing. The garment is washed with natural enzymes, resulting in a broken-in feel, just like a t-shirt that was washed or worn for a decade or two. Its special features include its heavy and sturdy feel and combined with a more generous fit and higher neck line.

The 101 Apparel Shapes And Sounds T-Shirt's features include:

• rib crew neck with interior tape
• Shapes And Sounds artwork printed on left chest and on the rear
• 101 Apparel woven clip label at bottom hem
• relaxed fit
• 100% cotton single jersey
• made in USA

Go to Item

E1 BT (Ortofon OM 5E)

399,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

12" Vinyl Frame - Aluminium

11,19 €* 13,99 € -20%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g

Go to Item

12" Vinyl Frame Set (3 Stück) - Aluminium

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. This Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Record Box - Vinyl Frame 12" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• rugged, lightweight aluminum frame for 12 inch records with acrylic glass cover
• outer dimensions: approx. 320x320 x 15 mm
• inner dimensions: 316 x 316 mm
• max. LP thickness: approx. 10 mm
• weight: 525 g (per frame)

Go to Item

7" Vinyl Frame Set (3 Stück) - Aluminium

22,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum (Triple Pack) - features/specifications:

• color: white
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g (per frame)

Go to Item

7" Vinyl Frame - Aluminium

7,19 €* 8,99 € -20%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

As a new member of the HHV Record Box family we would like to introduce the special 7 inch vinyl frame made from lightweight aluminum. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame is a rugged yet lightweight aluminum construction with a acrylic glass cover, which protects the artwork of the 7 Inch and emphasizes the noble design.

Record Box - Vinyl Frame 7" Vinyl Frame Aluminum - features/specifications:

• color: white
• lightweight, rugged aluminum frame for 7 inch records with acrylic glass cover
• outer dimensions: approx. 192x192 x 15mm
• inner dimensions: 188 x 188 mm
• weight: 270 g

Go to Item

12" Vinyl Frame Set (3 Stück) - MDF

33,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

Go to Item

7" Vinyl Frame - MDF

8,79 €* 10,99 € -20%