HHV Clothing 6823 Items

ATTENTION: Karhu sizes turn out to be 1/2 a size smaller than tagged, so please take 1/2 size larger than your regular size!

Between his introduction in 1977 and 1984, the Mestari has been a mainstay of the Karhu range, thanks to the eye-catching design with some colorful spots and Karhu's patented air cushioning that inspired some major players. After being missing in action for many years, the Karhu Mestari recently staged a comeback as a heavyweight in the pool of the most wanted retro kicks.

Karhu Mestari - features:

• 15% nylon mesh and 85% cowhide upper
• soft and breathable fabric lining
• foam-padded insole
• foamed EVA midsole with Karhu's patented air cushioning
• outsole made from abrasion-resistant nitril rubber
• Karhu branding embossed at tongue and heel
• M synthetic leather appliqués at side walls

ATTENTION: Karhu sizes turn out to be 1/2 a size smaller than tagged, so please take 1/2 size larger than your regular size!

The Karhu Albatross Control is a modern reinterpretation of the classic Albatross 82, introducing a fresh traction design inspired by the brand's heritage. The Karhu Albatross Control combines a sturdy, slip-resistant construction with a stylish contoured heel counter and an innovative non-slip outsole for a unique and dependable grip.

Karhu Albatross Control - features:

• nylon mesh upper with suede overlays
• soft and breathable fabric lining
• foam-padded insole
• synthetic leather M-logo
• reflective heel detail
• rope laces
• EVA foam midsole layer for added comfort
• Slip-resistant outsole
• air cushioning

Dickies Poplin SS Service Shirt - features:
• turn-down collar
• button front closure
• dual self-fabric patch pockets with button closure at chest
• curved bottom hem
• back yoke with stretch pleats
• Dickies horseshoe woven label at left chest pocket and lower button facing
• regular fit
• 100% cotton poplin with vertical stripe pattern

The Dickies Dyed SS Jersey Tee is equipped with the following features:
• rib crew neck with interior tape
• self-fabric patch pocket at left chest
• Dickies woven flag label at lower left side seam
• regular fit
• 100% preshrunk cotton single jersey, pigment dyed

Dickies x Nin Truong Texture Nylon Work Pants - features:
• elastic waistband
• faux fly stitching
• reinforced waistband
• two large front pockets plus coin pocket at wearer's right
• two self-fabric patch pockets at the rear
• tool pocket at right leg's outseam
• hammer loop at left leg's outseam
• bar-tack stitching at vital stress points
• contrast stitching
• Dickies horseshoe woven label at right back pocket
• relaxed fit with straight legs and regular waistline
• 100% nylon rip-stop with water-repellent DWR coating

Dickies x Nin Truong Texture Nylon Work Short - features:
• elastic waistband
• faux fly stitching
• reinforced waistband
• two large front pockets plus coin pocket at wearer's right
• two self-fabric patch pockets at the rear
• tool pocket at right leg's outseam
• hammer loop at left leg's outseam
• bar-tack stitching at vital stress points
• contrast stitching
• Dickies horseshoe woven label at right back pocket
• relaxed fit with regular waistline
• 100% nylon rip-stop with water-repellent DWR coating

Nudie Jeans Jimmy UD Zip Jacket - features:
• turn-down collar
• semi-hidden metal front zipper with custom pull
• self-fabric flap pocket with button closure at left chest
• 2 welt pockets at lower front
• snap button-adjustable straps at rear's bottom hem
• button cuffs
• interior chest pocket at wearer's right
• vintage-inspired stainless steel trim
• Nudie Jeans woven label at chest pocket
• regular fit
• 11.8 oz rigid denim made from 80% organic cotton, 20% post-consumer recycled cotton from worn-out Nudie Jeans

Nudie Jeans Filip Checked BD Shirt - features:
• woven plaid pattern, yarn dyed
• button-down collar
• frontal button placket
• self-fabric patch pocket at left chest
• curved bottom hem
• back yoke
• relaxed fit
• 100% organic cotton flannel (Fairtrade certified)

The Porter-Yoshida & Co. Heat 2Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Briefcase - specifications:

• weight: approx. 1200 g
• dimensions: approx. 410 x 300 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 590 g
• dimensions: approx. 275 x 200 x 100 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 1875 g
• dimensions: approx. 280 x 540 x 180 mm
• capacity: 25 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Tote Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Tote Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Tote Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Tote Bag - specifications:

• weight: approx. 1070 g
• dimensions: approx. 380 x 380 x 180 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Briefcase - specifications:

• weight: approx. 750 g
• dimensions: approx. 410 x 300 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 640 g
• dimensions: approx. 280 x 190 x 105 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Sling Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Sling Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Sling Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Sling Shoulder Bag - specifications:

• weight: approx. 675 g
• dimensions: approx. 150 x 340 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 2Way Boston Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 2Way Boston Bag (S) - specifications:

• weight: approx. 1010 g
• dimensions: approx. 410 x 270 x 150 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 445 g
• dimensions: approx. 150 x 190 x 70 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Pouch is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Pouch is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Pouch a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Pouch - specifications:

• weight: approx. 105 g
• dimensions: approx. 130 x 80 x 35 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat 3Way Briefcase is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat 3Way Briefcase is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat 3Way Briefcase a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat 3Way Briefcase - specifications:

• weight: approx. 1385 g
• dimensions: approx. 420 x 305 x 115 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Messenger Bag (S) is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Messenger Bag (S) is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Messenger Bag (S) a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Messenger Bag (S) - specifications:

• weight: approx. 915 g
• dimensions: approx. 305 x 255 x 120 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Rucksack is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Rucksack is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Rucksack a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Rucksack - specifications:

• weight: approx. 825 g
• dimensions: approx. 230 x 450 x 100 mm
• capacity: 8 liters
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 515 g
• dimensions: approx. 290 x 115 x 90 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Shoulder Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Shoulder Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Shoulder Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Shoulder Bag - specifications:

• weight: approx. 415 g
• dimensions: approx. 230 x 140 x 50 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Porter-Yoshida & Co. Heat Waist Bag is part of the brand's Heat series which combines two different materials with excellent durability and water resistance, and features a rugged and stylish design.

Since the release of Porter-Yoshida & Co.'s 2001 A/W series, the company have added items that match the lifestyle of the time, and have a rich line-up that can be used by a wide range of people, from business bags to small items.

The main material is varistor nylon made in Japan woven with 66 nylon thread, which is also used for car airbags and bulletproof vests, and has excellent heat resistance, abrasion resistance, and tear strength. Some parts are made of highly water-resistant tarpaulin fabric, which is used as an industrial material. Although the Porter-Yoshida & Co. Heat Waist Bag is a one-tone black color, it has a stylish design with contrast by combining fabrics with different textures.

Military gimmicks are added everywhere, and the PALS (Pouch Attachment Ladder System), which allows you to attach pouches and small items by sewing nylon tape at regular intervals, is also a point. A D-Rings-ring and a double ring are also attached to the main unit so that you can attach small items with a snap hook or wallet chain.

The main body of the bag is made with thick nylon tape that is woven at high density at key points, giving the Porter-Yoshida & Co. Heat Waist Bag a three-dimensional silhouette that prevents the fabric from sagging and provides good handling.

All types excluding the pouch and wallet come with a detachable key chain made of tanned leather as well as a Maglite engraved with Porter-Yoshida & Co. branding. (the Maglite comes with a warranty card, key chain, battery, and attention, all in a special case.)

Porter-Yoshida & Co. Heat Waist Bag - specifications:

• weight: approx. 410 g
• dimensions: approx. 230 x 130 x 75 mm
• fabrics - front: Barrister nylon ox with urethane coating / back: 500D polyester ox with acrylic coating / attachment: polyurethane tarpaulin
• made in Japan

The Chrome Industries Barrage Freight Backpack is equipped with the following features:
• roll-top construction
• adjustable external 5-point cargo net system
• side pockets including asy-access U-lock holder
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 15 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 33.5 x 58.5 (rolled) resp. 77.5 (unrolled) x 25.5 cm
• volume: 34-38 liters
• weight: approx. 2,130 g
• exterior: abrasion-resistant 1050D nylon
• lining: weatherproof 500D TPE tarpaulin made from 100% nylon

The Chrome Industries Barrage Freight Backpack is equipped with the following features:
• roll-top construction with reflective details
• adjustable external 5-point cargo net system
• side pockets including asy-access U-lock holder
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 15 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 33.5 x 58.5 (rolled) resp. 77.5 (unrolled) x 25.5 cm
• volume: 34-38 liters
• weight: approx. 2,130 g
• exterior: abrasion-resistant RedX fabric made from custom 210d recycled nylon X grid laminated sail cloth
• lining: weatherproof 500D TPE tarpaulin made from 100% nylon

The Carhartt WIP Script Embroidery Sweater is a timeless sweatshirt with a super-clean, understated design, based on superior processing. Still number one in the streetwear business.

The Carhartt WIP Script Embroidery Sweater is equipped with the following features:

• rib crew neck with interior tape
• Carhartt script logo stitched at left chest
• stretch rib cuffs and bottom band
• garment washed
• regular fit
• 74% cotton, 26% polyester brushed fleece, 350 g/m²
• garment washed

Carhartt WIP Linus Shirt - features:
• turn-down collar
• branded metal button front closure
• self-fabric patch pocket with Carhartt crest logo embroidery at left chest
• curved bottom hem
• button closure at cuffs
• horizontal back yoke
• box pleat at the rear
• contrast stitching
• loose fit
• 100% cotton poplin, 3.9 oz, with yarn dyed pinstripe details

The Urban Ex collection by Chrome Industries was designed for one purpose. Keeping your stuff out of the elements. The custom knurled-welded technique makes for some of the lightest, toughest and most waterproof seams out there.

The Chrome Industries Urban Ex Rolltop 20L is equipped with the following features:

• lightweight Knurled Welded™ construction
• roll top with magnetic closure
• front pocket with waterproof YKK zip closure
• holder loops at front
• reflective Molle webbing on face and harness for maximum night visibility
• adjustable, padded, and ergonomic shoulder straps
• removable and adjustable sternum strap with custom push plate buckle
• interior padded 15 inch laptop sleeve
• quick-access storage compartment
• durable synthetic rubber bottom panel
• padded back panel
• top handle
• radio-frequency welds for lightweight, waterproof construction
• Chrome Industries label on front
• dimensions: approx. 25.5 x 53.5/61 x 13 cm
• volume: 20-25 liters
• exterior: lightweight 500D fabric with PU coating at the rear, made from 100% nylon
• lining: 150D fabric made from 100% recycled polyester
• weight: approx. 800 g

The Chrome Industries Barrage 22L Cargo Backpack is equipped with the following features:
• roll-top construction
• adjustable exterior cargo net at front
• side pockets
• easy-access U-lock holder at side wall
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 13 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 30 x 51-56 x 15 cm
• volume: 18-22 liters
• weight: approx. 1.36 kg
• exterior: abrasion-resistant 1050D nylon & 500D TPE tarp
• lining: weatherproof 18 oz truck tarpaulin made from 100% nylon with PU coating

The Chrome Industries Barrage 22L Cargo Backpack is equipped with the following features:
• roll-top construction with reflective details for visibility in the dark
• adjustable exterior cargo net at front
• side pockets
• easy-access U-lock holder at side wall
• adjustable, padded, and ergonomic shoulder straps
• adjustable sternum strap with custom push plate buckle
• interior padded 13 inch laptop compartment with elastic hook and loop fastener closure
• EVA foam-padded back panel
• top handle
• Chrome Industries label on front
• dimensions: approx. 30 x 51-56 x 15 cm
• volume: 18-22 liters
• weight: approx. 1.36 kg
• exterior: abrasion-resistant 210D recycled nylon X grid laminated sail cloth & 500D TPE tarp
• lining: weatherproof 18 oz truck tarpaulin made from 100% nylon with PU coating

Introduced in the 1980s, the Puma Slipstream is a solid basketball low-top that also made its way to the street, thanks to the sleek look and the supportive construction that offers best protection, especially at the ankle. For the current season, Puma reintroduced a couple of reimagined versions of the Slipstream including this full leather Neverworn edition with a clean finish.

Puma Slipstream Lo Neverworn III - features:

• leather upper
• soft and breathable fabric lining
• padded collar
• Formstripe suede appliqués at side panels
• foam-padded insole
• EVA foam midsole
• non-slip cupsole made from abrasion-resistant rubber
• Puma woven label on tongue

According to designer Yohji Yamamoto, Y-3 stands for the ultimate crossover of sport and style and a progressive mix of tradition and modernity. We can co-sign that. Once again, Y-3 presents performance wear in a new context, relying on Yohji Yamamoto's rebellious creativity. The basis is provided by classic silhouettes from the adidas archive. The result is innovative looks that invite for experimentation.

The Y-3 Running Cap is equipped with the following features:

• Y-3 branding printed on front panel
• taped vent holes
• flexible visor
• adjustable strap with hook and loop fastener at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 100% recycled polyester Gore-Tex

Inspired by the glorious past of adidas Originals ZX series, the new ZX 8000 running shoe keeps your feet cool with premium materials, comfortable adiPRENE® cushioning and a FORMOTION™ design that helps you run stronger and longer. By the way, the adidas ZX 8000 has been made in part with recycled content generated from production waste, e.g., cutting scraps and post-consumer household waste, to avoid the larger environmental impact of producing virgin content.

adidas Originals ZX 8000 - features:

• Formotion™ adapts to the ground to ensure the smoothest, most comfortable run possible
• textile, leather and synthetic upper
• non-slip breathable fabric lining
• anatomically molded EVA insole for comfort
• adiPRENE®+ in the forefoot maintains propulsion and efficiency
• Torsion® technology for midfoot integrity
• adiPRENE® under the heel for superior cushioning at impact
• adiWEAR® outsole offers the ultimate in high-wear durability
• blown rubber outsole for lightweight grip and cushioning

Straight out of the archives, Puma presents the Puma Star Neverworn edition. As an integral part of the brand's current collection, this version of the Puma Court Star was updated with suede upper, while the original design and silhouette stays untouched. By the way, the traces of glue are intentional to emphasize the special character of this model.

Puma Court Neverworn III - features:

• durable leather upper
• synthetic leather lining
• perforated Formstripe branding at side panels
• foam-padded insole
• cupsole construction
• Puma woven label at tongue
• additional Puma branding embossed at heel window
• Puma Star branding embossed at side panel

With the Clyde Neverworn III, Puma has created another tribute to an important design from the archive. By the way, the traces of glue are intentional to emphasize the special character of this model.

Established in the early 1970s, the Puma Clyde is a legendary basketball low-top shoe co-developed by no less than NBA all-time great, Mister Walt "Clyde" Frazier. This world-famous footwear icon still kicks it with the minimalist design, clean and stylish lines, and an old school-inspired in-ya-face approach. While technology changed over the years, the Puma Clyde stays true to its roots and keeps it real with purist aesthetics. Time to blow the dust off your old school boom box to pump the "Critical Beatdown" tape and do some breakdance moves at the street corner, b-boys 'n' b-girls!

Puma Clyde Neverworn III - features:

• durable leather upper
• synthetic leather lining
• Puma Formstripe hairy suede appliqués at side panels
• foam-padded insole
• flexible rubber sole construction
• Puma woven label at tongue
• Puma Clyde signature branding at side panel

adidas Premium Originals Crepe Tracksuit Pants - features:
• stretch waistband with drawstring adjustment
• 2 front pockets with hidden zip closure
• adidas Trefoil logo embroidery beneath left pocket
• contrast 3 stripe tapes at outseams
• raised seams at legs
• loose fit, straight legs
• 63% recycled polyester, 33% viscose, 4% elastane

Introduced in late 70s city series, the adidas Originals Bali blends the silhouette of adidas classics such as the Samba or Handball with a slim rubber sole reminiscent of 60s-style trainers and a nice retro colorway.

adidas Originals Bali - features:

• slim signature silhouette
• suede upper
• synthetic leather lining at heel plus fabric lining
• 3 Stripes appliqués at side panels
• foam-padded insole
• rubber outsole with lawn tennis tread-inspired pattern
• adidas Bali label on suede tongue

According to designer Yohji Yamamoto, Y-3 stands for the ultimate crossover of sport and style and a progressive mix of tradition and modernity. We can co-sign that. Once again, Y-3 presents performance wear in a new context, relying on Yohji Yamamoto's rebellious creativity. The basis is provided by classic silhouettes from the adidas archive. The result is innovative looks that invite for experimentation.

The Y-3 M Running Short Tights are running shorts made from perforated fabric with integrated tights, a drawstring-adjustable waistband, a zip pocket at the back of the waistband as well a a Y-3 print on the left leg. 83% recycled polyester, 17% elastane.

According to designer Yohji Yamamoto, Y-3 stands for the ultimate crossover of sport and style and a progressive mix of tradition and modernity. We can co-sign that. Once again, Y-3 presents performance wear in a new context, relying on Yohji Yamamoto's rebellious creativity. The basis is provided by classic silhouettes from the adidas archive. The result is innovative looks that invite for experimentation.

The Y-3 M Running LS Tee Longsleeve Tee's features include:

• crew neck
• Y-3 branding printed on left chest
• additional Yohji Yamamoto signature printed on the rear
• regular fit
• perforated performance jersey made from 86% recycled polyester, 14% elastane

With the Neverworn edition of the Suede VTG, Puma pays homage to the OG version of the legendary Suede design. Back in 1968, Puma introduced the classic Suede, the world-famous basketball low-top b-boys and b-girls made famous during the days of pop-locking, electric boogaloo, and breakdancing in the 1980s. If you like an authentic hip hop style, you definitely love these kicks, but make sure to add fat laces for a complete look!

Puma Suede VTG Neverworn III - features:

• hairy suede upper
• synthetic leather lining
• Puma Formstripe suede appliqués at side panels
• foam-padded insole
• EVA foam midsole
• cupsole construction made from abrasion-resistant rubber
• woven Puma label at tongue
• Puma gold branding embossed at heel window
• Puma gold branding embossed at side panel

The Easy Carry 5 Panel by Kangol is a visor hat with a high utility factor and outdoor ambitions. Kangol's adjustable Easy Carry 5 Panel not only offers sun protection, but also a total of three pockets in which you can store small items plus mini snap hooks for additional attachment options. Added to this is the excellent workmanship and the comfortable interior with tapes on the seams and a moisture-absorbing band.

The Kangol Easy Carry 5 Panel is equipped with the following features:

• self-fabric pocket with hook and loop fastener plus tonal Kangol kangaroo logo appliqué on front panel
• tonal eyelet stitching at vent holes
• self-fabric flap pocket with hook and loop fasteners on side panels
• flexible visor
• contrast loops with mini snap hooks at the bottom of both side panels
• adjustable nylon strap with front-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 60% cotton, 40% polyester

The Kangol Growth Bucket Hat is an update of the legendary design that has been sported by famous rappers during the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. Made from braid linen-poly fibers, the iconic Kangol Growth Bucket Hat is equipped with basic features such as the unique bell-like shape, a bungee toggle adjuster at the rear, colored metal eyelets at vent holes, a moisture-absorbing sweatband at the interior, as well as a seasonal Kangol graphic embroidered at wearer's left. 100% polyester.

The Kangol Easy Carry Fisherman Hat is an update of the legendary bucket hat. Made from twill fabric, the features of the Kangol Easy Carry Fisherman Hat include a flap pocket with hook and loop fastener attached to the crown, an adjustable chin cord as well as a press stud that can be used to fold up and fix the brim, while interior features a moisture-absorbing sweatband. 60% cotton, 40% polyester twill.

For ages, a headgear item like the Kangol Soft Touch five panel hat has been the smartest choice if you’re looking for a hat with visor. The smooth silhouette with the mid rise front as well as the closure strap for a personalized fit set the stage for a long-lasting friendship.

The Kangol Soft Touch 5 Panel is equipped with the following features:

• Kangol logo appliqué on front panel
• tonal eyelet stitching at vent holes
• flexible visor
• adjustable nylon strap with front-release buckle at the rear
• interior includes taped seams and a moisture-absorbing sweatband
• 57% nylon, 43% polyester

The Kangol 504 is an update of the legendary flat cap that has been sported by famous rappers in the golden era of the 80s...remember Kool Keith, LL Cool J, Slick Rick and other flamboyant guys with outstanding microphone skills. Made from synthetic wool felt-inspired fabric, the Kangol Bermuda Hawker is equipped with basic features such as the barely seen small visor as well as a moisture-absorbing sweatband at the interior. 50% acrylic, 28% modacrylic, 22% nylon; headband: 100% nylon.

The Carhartt WIP Dawson T-Shirt is equipped with the following features:
• rib crew neck with interior tape
• Carhartt woven square label at bottom left
• loose fit
• 100% organic cotton single jersey, 230 g/m²

The Carhartt WIP S/S Class of 89 Tee is equipped with the following features:
• rib crew neck with interior tape
• Carhartt WIP Class of 89 branding printed on left chest
• loose fit
• 100% organic cotton single jersey, 200 g/m² (garment dyed)
• made in EU

The Carhartt WIP S/S Link Script Tee is equipped with the following features:
• rib crew neck with interior tape
• Carhartt lettering embroidered at lower left front
• loose fit, boxy cut
• 100% organic cotton single jersey, 230 g/m²

Carhartt WIP S/S Linus Shirt - features:
• turn-down collar
• branded metal button front closure
• self-fabric patch pocket with Carhartt crest logo embroidery at left chest
• curved bottom hem
• horizontal back yoke
• box pleat at the rear
• loose fit
• 100% cotton poplin, 3.9 oz, with yarn dyed pinstripe details

The Carhartt WIP Hooded Script Embroidery Sweater is a timeless hoodie with a super-clean, understated design, based on superior processing. Still number one in the streetwear business.

The Carhartt WIP Hooded Script Embroidery Sweater is equipped with the following features:

• drawstring-adjustable two-layer hood with interior tape
• Carhartt script logo stitched at left chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• regular fit
• 74% cotton, 26% polyester brushed fleece, 350 g/m²
• garment washed

The Carhartt WIP Hooded Script Embroidery Sweater is a timeless hoodie with a super-clean, understated design, based on superior processing. Still number one in the streetwear business.

The Carhartt WIP Hooded Script Embroidery Sweater is equipped with the following features:

• drawstring-adjustable two-layer hood with interior tape
• Carhartt script logo stitched at left chest
• kangaroo pocket
• stretch rib cuffs and bottom band
• regular fit
• 74% cotton, 26% polyester brushed fleece, 350 g/m²
• garment washed