Headshells 13 Items

Nagaoka Headshell HSAL-01

This headshell has been designed with the utmost precision to give you an outstanding listening experience.

Design for maximum ease of use:
When placing the needle, the finger lift design provides an excellent view of the needle tip. The finger hook is easy to use and the angle can be easily held with your fingers. Every detail has been designed with the utmost care to ensure uncomplicated and pleasant use.

Ideal for NAGAOKA JT-80 Series and many other pickups:
This high-quality headshell was developed specifically for the NAGAOKA JT-80 series to ensure an optimal combination of precision and performance. Enjoy music in its purest form with this perfectly coordinated combination.

Of course, the Nagaoka HSAL-01 can also be combined with other pickups. The elongated holes allow the perfect positioning of your pickup and the included cables leave enough room for adjustment.

Easy installation:
The Nagaoka Headshell HSAL-01 comes with an installation guide to give you an effortless setup. The package contains all the necessary items including mounting screws to make the installation process easier for you.

Product specifications:
• Housing material: aluminum
• Pin: Gold plated
• Weight: 6.8g (approximate value, excluding mounting screws)
• Frequency response: 20Hz - 20kHz
• Box contents: headshell housing, lead wire, 2 × 12mm screws, 2 × 6mm screws, compatible nuts, washers.

Made in Japan, STOKYO turntable replacement headshell

Official STOKYO headshell same type as you will find on Technics SL-1200
High Quality finish (Matte)
Lead wires (Shielded)

The LH-4000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-4000 is great for a wide variety of cartridges, specially recommended for the MC Quintet series.

Special features:
• Azimuth adjustable, which is beneficial for optimal channel separation
• Ergonomic fingerlift for easy handling
• Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-4000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Azimuth adjustable by means of hexagon wrench
• PIN conductor - Gold plated
• Weight - 14.3 grams without screws
• Mounting distance min. - 39.5 mm
• Mounting distance max. - 45.6 mm
• Headshell length - 51.9 mm
• Headshell width - 19.1 mm

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Ortofon SH-4 headshells are high-quality, solid headshells for variety of applications

The SH-4 headshell has an ergonomic design with a long finger that is easy to pick-up. The big finger grip and shorter construction makes movement and placement of the headshell easy and visible.
The wire terminals on the rear side are also gold plated for better signal transmission.

Dimensions and weight:
• Weight: 9.4g
• Shell length: 51.5mm
• Finger Length: 27mm

The SH-4 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Ortofon SH-4 headshell PINs and Ortofon cartridges' terminal PINs diameter is 1.2 mm. Leadwires supplied fit all right on the cartridges' terminal PINs.

For TN-200 Turntable

The AT-HS4BK is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.
The AT-HS4BK features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Available in black (AT-HS4BK) and silver (AT-HS4SV).

Functions:
• Universal ½"-mount headshell for 4-pin tonearms
• Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
• Angled shape suitable for straight tonearms
• Finger lift enables precise stylus placement
• Includes lead wires and mounting screws

Specifications:
• Material: Aluminum
• Connector: Aluminum
• Weight: 8.5 g (0.3 oz), including lead wire
• Dimensions: 12.5 mm (0.5") H × 20.7 mm (0.8") W × 54.0 mm (2.1") D
• Accessories: Installation screws (10 mm × 2, 8 mm × 2), nuts x 2, plastic washers x 2

Die-cast aluminium body
Integral finger lift
Includes terminals quad wire
1 pair of 10mm screws and 1 pair of 8mm screws
1 pair of M2.6 nuts with plastic washer
Available in Black and Silver

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

aluminum, weight: 9g.