DJ Turntables 23 Items

AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q

AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q

This fully manual turntable is modeled after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.

Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.

The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

High-fidelity audio with Bluetooth® wireless technology

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable

Compatible with the high-quality Qualcomm® aptX™ audio codec

Built-in switchable phono preamplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor DC servo motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminum
Anlaufmoment >1.0 kgf.cm
Bremssystem Electronic brake
Gleichlaufschwankung <0.2% (WTD) @ 3 kHz (JIS)
Rauschabstand >50 dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
Phono-Vorverstärkung 36 dB nominal, RIAA equalized
USB-Funktionen A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above
Betriebsspannung 100 to 240 V, 50/60 Hz, 1.5A Max
Power Consumption 2.75 W
Abmessungen 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Gewicht 8 kg (17.6 lbs.), without dust cover
Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
Tonearm Type Balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5 mm
Overhang 16 mm
Tracking Error Angle Less than 3 degrees
Applicable Cartridge Weight 3.5-8.5 g
Anti-skating Range 0-4 g
Replacement Stylus AT-VMN95E
Communication System Bluetooth Version 5.0
Maximum Communication Range Line of sight - approx. 10 m (33')
Compatible Bluetooth Profile A2DP
Support Codec SBC, Qualcomm® aptX™ audio

Manual: https://www.audio-technica.com/media/wysiwyg/product/pdfs/eu/AT-LP120XBT-USB_UM_162501910_V2_EN_web_200826.pdf

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Turntable Designed for DJs
This high-torque direct-drive deck comes with a high-output AT-XP3 DJ cartridge and is loaded with professional features.

Take Control
Whether used for DJ gigs or playing records at home, the AT-LP140XP gives you exquisite control over your vinyl listening experience.

Features:
• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
• AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Popup stylus target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
• Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)

Specifications:
Turntable
• Type: 3-speed, fully manual operation
• Motor: High-torque DC motor
• Drive: Method Direct drive
• Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
• Turntable Platter: Die-cast aluminium
• Pitch Variation: +/-8% or +/-16% or +/-24%
• Starting Torque: 2.2 kgf-cm
• Wow and Flutter: <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio: >50 dB
• Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
• Power Supply Requirements: 115/230V AC, 60/50 Hz
• Weight: 10.0 kg

Headshell
• Model: AT-HS6
• Weight: 9 g

Tone arm
• Type: Balanced S-shaped tonearm with detachable headshell
• Length: 230.5mm
• Overhang: 16mm
• tracking error: Less than 3 degree
• Tracking weight: 3.5 - 8.5 g
• Anti-skating: 0-4 g

Manual: https://eu.audio-technica.com/resources/AT-LP140XP_UM_162501390_V1_DE_web_190607.pdf

PROS
•USB port
•Removable plastic cover and built-in stereo preamp
•Mechanical tonearm lifter

PRODUCT INFORMATION
•Its trendy design and modern technology make this turntable perfect for all enthusiasts. The Lenco L-3808 is available in 4 colours: white,black, silver and matt grey.

•Do you want to play your favourite sounds of the past for your children? The Lenco L-3808 produces a superb high-quality sound. Your children will be amazed. Because this midi turntable is so easy to use, you can even let them play a record. The Lenco L-3808 is equipped with a mechanical tonearm lifter, a moving magnet cartridge (MMC) and a built-in preamp. You can play records at two speeds: 33 RPM and 45 RPM. A removable plastic cover protects the turntable from dust.

•As the years have passed, your records may have become old and fragile. To prevent your favourite music being lost for ever, you can digitise your cherished vinyl collection using the Lenco L-3808. Connect the turntable to your computer via the USB port and the job will be done in next to no time. Wherever you go, you will always have your favourite music with you.

SPECIFICATIONS
•SKU: A003073
•Product height: 15.10 cm
•Product depth: 34.80 cm
•Product width: 44.80 cm
•Number of RCA outputs: 1
•Power option: non-detachable AC-cable, Power on/off switch, AC
•USB connectors: USB A
•Type of drive: Direct drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040637
•Amplifier options: Includes (pre) amplifier, Pre-set Equaliser
•Functional storage media: USB support
•Material: Plastic
•Manufacturer's warranty: 24 months
•Maximum power consumption: 11W

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

A REBORN CLASSIC.
The PLX-1000 is precision engineered for the booth, drawing on 50 years’ experience of making high-end turntables. This high-torque direct drive turntable is equipped with a classic layout and a rubber-lined, S-shaped tone arm that improves isolation and prevents feedback. It is solidly built for excellent vibration damping and ultra-precise, high grade audio playback.

Featuring next generation improvements, the PLX-1000 is the perfect score for professional DJs and vinyl enthusiasts. Combine this turntable with your Pioneer DJM mixer and get the ideal DJ system set-up.

TURN THE TABLES
The high-torque direct drive makes sure that your tracks reach a rotation speed of 33⅓ rpm in merely 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more). Plus it ensures stable rotation and exceptional control.

PICK UP THE PACE
Unique to this turntable is the multi-pitch tempo control. Next to a standard variable width of ±8%, you can also select a variable width from ±16% and ±50%. A simple reset button instantly reverts to the fixed rotation speed at ±0%.

EASILY CONNECTED
For low impendance and amazing sound quality output, you can easily connect to the professional-grade, gold-plated RCA jacks. Ideal for a DJ on the road, the PLX-1000 has interchangeble power and audio cables.

ncluded Accessories
Turntable sheet
Slip mat and sheet
Dust cover
Head shell
Balance, sub and shell weights
Audio cable
Ground wire

Width
453 mm
Height
159 mm
Depth
353 mm
Weight
13.1 kg
Power Requirements
220-240 V / 50/60 Hz

Drive Method
Quartz lock, servo-type, direct drive
Platter
Aluminium, die-casting diameter: 332 mm
Motor
3-phase, brushless DC motor
Braking System
Electronic brake
Rotation Speed
33⅓-45 rpm
Rotation Adjustment Range
±8, ±16, ±50 %
Wow and Flutter
<0.01% (Measured by obtaining signal from built-in frequency generator of motor assembly.)
Signal-to-Noise Ratio
70 dB
Starting Torque
> 4.5 kg/cm
Start Time
0.3 sec (at 33⅓ rpm)

Arm Type
Universal type S-shape tone arm
Gimbal-supported type bearing structure
Static balance type
Overhang
15 mm
Effective Length
230 mm
Tracking Error
Within 3°
Height Adjustment Range
6 mm
Stylus Pressure Variable Range
0-4 g (1 scale 0.1 g)
Single Cartridge Weight
3.5-13 g

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

The PLX-500 inherits the layout of the PLX-1000 professional turntable and produces a warm, clear analogue sound. The perfect deck if you want to start playing with vinyl or if you just want to listen to your record collection at home.

Solidly built with excellent vibration damping and precise audio playback, this high-torque deck has a USB out so you can make digital recordings of your vinyl collection in our free rekordbox software. You can also combine the PLX-500 with the rekordbox dvs Plus Pack, a compatible mixer and the RB-VS1-K Control Vinyl to play and scratch with digital files.

EXCELLENT SOUND DESIGN

Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.

EASY DIGITAL RECORDING

Record your vinyl collection to high-quality digital files by simply connecting the turntable to your PC or Mac via the USB out.

SMOOTH DJ PLAY

Use the PLX-500 to mix and scratch your vinyl records or combine the turntable with rekordbox dvs, a compatible DJ mixer and the RB-VS1-K Control Vinyl to play and perform with your digital files.

COVER ART DISPLAY

Put your record covers on display while listening to your vinyl thanks to the sleeve stand inside the dust cover.

Included Accessories:
• PLX-500
• Power cord
• USB cable
• Slip mat
• Dust cover
• Adapter for EP records
• Head shell (with cartridge)
• Balance and shell weights
• Audio adaptor cable: 1 Stereo pin plug (female) & 1 Stereo mini plug (male)
• Operating instructions

Specifications:
• Width: 17.72 in
• Height: 6.26 in
• Depth: 14.49 in
• Weight: 23.59 lb

Turntables:
• Drive Method: Servo-type direct drive
• Platter: Aluminium, die-casting diameter: 332 mm
• Motor: 3-phase, brushless DC motor
• Braking System: Electronic brake
• Rotation Speed: 33⅓, 45, 78 rpm
• Rotation Adjustment: Range ±8 %
• Wow and Flutter: < 0.15% WRMS
• Signal-to-Noise Ratio: 50 dB
• Starting Torque: > 1.6 kgf cm
• Start Time: Within 1 sec (at 33⅓ rpm)

Tone Arm:
• Arm Type: Universal type S-shape tone arm, Gimbal-supported type bearing structure, Static balance type
• Overhang: 0.63 in
• Effective Length: 9.07 in
• Tracking Error: Within 3°
• Height Adjustment Range: 0.24 in
• Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
• Cartridge Weight Single: < 9.5 g
• Cartridge type: VM

Terminals:
• Outputs: 1 PHONO/LINE (RCA)
• USB: 1 USB B port

•Quartz-driven DJ turntable with direct drive motor
•Reinforced construction with optimized damping features
•Redesigned metal top panel and tactile buttons

FEATURES
•NEW in the MK2 version:
•Newly developed top panel and reinforced housing construction
•Reworked metallic buttons with improved feel & tactile response
•Precision Pitch with selectable ranges of +/-8 %
•Superior finish in deep black metallic
•Quartz-driven DJ turntable with direct drive
•Perfect for beginners
•Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
•Precision-engineered, die-cast aluminium platter with stable rotation
•Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
•Universal connection for pick-up systems (SME)
•Extendible needle illumination
•Shock-absorbing feet for vibration isolation
•Sturdy, heavy construction with optimized damping features
•Prepared for dust cover (available as optional accessory)
•Incl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, operating instruction manual

TECHNICAL DATA

Turntable:
•Type: direct drive turntable
•Drive: quarz-driven direct drive
•Motor: 8-pol., 2-phase, brushless DC motor
•Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
•Starting torque: > 1kg/cm
•Brake time: < 1 sec.
•Start-up / rpm change: < 1 sec.
•Wow and flutter: < 0.15% WRMS
•Signal-to-noise ratio: > 50 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: aluminium die-cast
•Diameter: 332 mm

Tone arm:
•Type: universal, statically balanced, s-shaped
•Effective length: 230.5 mm
•Overhang: 16 mm
•Tracking angle error: < 3°
•Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)
•Anti-skating range: 0 - 7 g

Connections:
•1x PHONO out (gold-plated), 1x GND

General:
•Power supply: AC 115/230 V, 60/50 Hz (US/EU)
•Power consumption: 13 W
•Dimensions: 450 (w) x 352 (d) x 144 (h) mm
•Weight: appr. 6.75 kg

•Quartz-driven DJ turntable with high-torque direct drive
•Powerful motor with more than 1.8 kg/cm torque
•Redesigned metal top panel, tactile buttons and reinforced housing construction

FEATURES
•NEW in the MK2 version:
•Newly developed top panel and reinforced housing construction
•Reworked metallic buttons with improved feel & tactile response
•Precision Pitch with selectable ranges of +/-8 % & +/-16 %
•Tempo reset (Quartz Lock) feature
•Superior finish in deep black metallic
•Quartz-driven DJ turntable with high-torque direct drive
•Designed for professional use
•Powerful brushless DC motor with more than 1.8 kg/cm torque
•Precise motor control with 3 speeds selectable (33 1/3, 45 & 78 rpm)
•Reverse function: switch for forward/reverse playback
•Precision-engineered die-cast aluminium platter with stable rotation
•Statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•Extendible needle illumination
•Shock-absorbing feet for vibration isolation
•Sturdy, heavy construction with optimized damping features
•Prepared for dust cover (available as optional accessory)
•Incl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, instruction manual

TECHNICAL DATA

Turntable:
•Type: direct drive turntable
•Drive: quartz-driven high-torque direct drive
•Motor: 8-pol., 3-phase, brushless DC motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 rpm)
•Starting torque: > 1.8 kg/cm
•Brake time: < 1 sec.
•Start-up / rpm change: < 1 sec.
•Wow and flutter: < 0.2 % WRMS
•Signal-to-noise ratio: > 50 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: aluminium die-cast
•Diameter: 332 mm

Tone arm:
•Type: universal, statically balanced, s-shaped
•Effective length: 230.5 mm
•Overhang: 16 mm
•Tracking angle error: < 3°
•Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)
•Anti-skating range: 0 – 7 g

Connections:
•1x PHONO out (gold-plated), 1x GND

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 12 W
•Dimensions: 450 (w) x 352 (d) x 144 (h) mm
•Weight: appr. 9.8 kg

•NextGen Turntable for professional Club DJs and Turntablists
•Power-Torque Direct Drive with precise motor control and stable rotation
•Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

FEATURES
NEW features of the MK2 version:
•Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
•More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
•Fine-tuned motor control for further optimization of wow and flutter and rotation
•Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
•Particularly light weight and rigid, satin aluminium material used for tone arm
•Adjustable Pitch scale for precise adjustments
•Optional ground terminal offers additional protection in complex club & studio environments
•Easily replaceable, freely rotatable LED needle light in new unibody aluminium design
•High-quality and hard-wearing deep black, metallic finish
•Quartz driven DJ turntable with upper-torque direct drive
•Adjustable stop speed (0.2 - 6 sec.)
•Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
•Precision manufactured, die cast aluminium turntable
•Rubber inlays for reduction of vibrations and background noise
•Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
•Quartz lock
•Additional start/stop button for vertical positioning
•Reverse function: switch for forwards and reverse operation
•Recessed connection cavity for easy installation in cases & seamless adjustment
•Phono and line out (no grounding required)
•Removable mains and RCA cable
•Safety mains switch
•Shock-absorbing feet against vibrations
•Incl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructions

•Comes without cartridge!

TECHNICAL DATA

Turntable:
•Type: direct-drive turntable
•Drive: quartz driven upper-torque direct drive
•Motor: 16-pole, 3-phase, brushless motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
•Starting torque: 2.8 – 4.5 kg/cm (adjustable)
•Adjustable stop time (0.2 - 6 sec.)
•Start-up time / change to RPM: <0.2 sec
•Wow and flutter: 0.01% WRMS*
•S/N ratio: > 55dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: die cast aluminium
•Diameter: 332 mm
•Weight: approx. 1.5 kg

Tone arm:
•Type: universal, static balanced, S-shaped
•Effective length: 230 mm
•Overhang: 15 mm
•Tracking error range: < 3°
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•VTA setting range: 0-6 mm
•Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
•Anti-skating range: 0 – 3 g
•Effective tone arm mass: 12.8 g (incl. headshell)

Connections:
•1x PHONO/LINE Out (gold-plated), 1x GND earth connection

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 13 W
•Dimensions: 458 x 354 x 144,6 mm
•Weight: approx. 11.7 kg

RP-7000 MK2 SILVER

• NextGen Turntable for professional Club DJs and Turntablists
• Power-Torque Direct Drive with precise motor control and stable rotation
• Extra-heavy body design with high-rigidity for excellent damping, isolation and sound

PROFESSIONAL UPPER TORQUE TURNTABLE SYSTEM
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

STURDY CASING CONSTRUCTION
By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASE
The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

DUAL START/STOP BUTTONS, PRECISE MOTOR CONTROL AND REVERSE FUNCTION
As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

HIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADER
Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMP
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIES
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

FEATURES
New features of the MK2 version:
• Built for the club: rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and molding compound for high vibration damping and isolation
• More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
• Fine-tuned motor control for further optimization of wow and flutter and rotation
• Newly developed, height-adjustable tone arm base (VTA) and anti-skating control
• Particularly lightweight and rigid, satin aluminium material used for tone arm pipe
• Pitch scale for precise adjustments
• Optional ground terminal offers additional protection in complex club & studio environments
• Easily replaceable, freely rotatable LED needle illumination in new unibody aluminium design
• High-quality and hard-wearing silver metallic finish
• Quartz driven DJ turntable with upper-torque direct drive
• Adjustable brake speed (0.2 - 6 sec.)
• Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
• Precision manufactured, die cast aluminium turntable
• Rubber inlays for reduction of vibrations and background noise
• Statically-balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
• Universal connection for pick-up systems (SME)
• Pitch range +/-8 %, +/-16 %, +/-50 % (ultra pitch)
• Quartz lock
• Additional start/stop button for vertical positioning
• Reverse function: switch for forward and reverse playback
• Recessed connection cavity for easy flight-case installation & seamless adjustment
• Phono and line out (no grounding required)
• Removable mains and RCA cables
• Safety mains switch
• Shock-absorbing feet against vibrations
• Incl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructions, without cartridge

TECHNICAL DATA
Turntable:
• Type: direct-drive turntable
• Drive: quartz driven upper-torque direct drive
• Motor: 16-pole, 3-phase, brushless motor
• Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
• Starting torque: 2.8 – 4.5 kg/cm (adjustable)
• Adjustable stop time (0.2 - 6 sec.)
• Start-up time / change to RPM: <0.2 sec
• Wow and flutter: 0.01% WRMS*
• S/N ratio: > 55dB (DIN-B)
• Brake system: electronic brake
• Record weight: recommended 800g

Platter:
• Material: die cast aluminium
• Diameter: 332 mm
• Weight: approx. 1.5 kg

Tone arm:
• Type: universal, statically balanced, S-shaped
• Effective length: 230 mm
• Overhang: 15 mm
• Tracking error range: < 3°
• Offset Angle: 22°
• Stylus Pressure: 0 - 4 g
• VTA setting range: 0-6 mm
• Useable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)
• Anti-skating range: 0 – 3 g
• Effective tone arm mass: 12.8 g (incl. headshell)

Connections:
• 1x Phono/Line Out (gold-plated), 1x GND earth connection

General:
• Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
• Power consumption: 13 W
• Dimensions: 458 x 144.6 x 354 mm
• Weight: approx. 11.7 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/8/238928_Reloop_IM.pdf

•The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musicians
•Designed for Serato DJ Pro: control 7 new colour-coded performance modes
•Platter Play mode: performance pads can be used to control the speed of the platter to enable melodic and musical live performances

FEATURES
•NEW in the MK2 version:
•The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musicians
•Designed for Serato DJ Pro: control 7 new RGB colour-coded performance modes
•Platter Play: in this mode, the performance pads can be used to control the speed of the platter to enable melodic and more musical live performances
•Extra large, highly responsive performance pads with multi-colour LEDs
•22 scales are available with the option to create up to 9 custom scales
•Pitch bending function via speed select buttons in Platter Play mode
•Reworked control section: more streamlined multi-encoder and intuitive mode section
•First of its kind: independent pad modes (when used in conjunction with the ELITE mixer)
•Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation
•More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
•Fine-tuned motor control for further optimization of wow and flutter and rotation
•Newly-developed, height-adjustable MK2 tone arm base (VTA)
•Particularly lightweight and rigid satin aluminium material used for tone arm
•Adjustable pitch scale for precise adjustments
•Additional output: the turntable can be connected to two mixers at the same time and also allows easy switching from DVS to vinyl
•Optional ground terminal offers additional protection in complex club & studio environments
•Easily replaceable, freely rotatable LED needle light in new unibody aluminium design
•High-quality and hard-wearing deep black, metallic finish
•Quartz driven hybrid turntable instrument with upper-torque direct drive
•Takes your DJ performances to a new level of creativity and musicality
•MIDI compatible control section consists of multi-encoder, 8 large LED pads, three layers with 7 performance modes (cue, sampler, saved loops, pitch play, loop, loop roll, slicer) and 2 user modes
•Digital LC display for pitch, BPM, scale, key, deck assignment and firmware settings
•Seamlessly combines a powerful musical instrument and a world class professional DJ turntable
•Adjustable stop time (0.2 - 6 sec.)
•Precise motor control with 3 speeds (33 1/3, 45 & 78 RPM)
•Precision manufactured, die cast aluminium turntable
•Rubber inlays reduce vibrations and background noise
•Statically balanced, universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
•Universal connection for pick-up systems (SME)
•High-resolution pitch fader (0.02 % resolution)
•Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
•Quartz lock
•Reverse function: switch for forward and reverse operation
•Smart USB link for up to 4 turntables
•Auto deck-assign feature when linked
•Recessed connection cavity for easy installation in cases & seamless adjustment
•Phono and line out (no grounding required)
•Removable mains and RCA cables
•Safety mains switch
•Shock-absorbing feet insulate against vibrations
•Incl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

TECHNICAL DATA

Turntable:
•Type: direct-drive turntable
•Drive: quartz driven upper-torque direct drive
•Motor: 16-pole, 3-phase, brushless motor
•Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
•Starting torque: 2.8 - 4.5 kg/cm (adjustable)
•Adjustable stop time (0.2 - 6 sec.)
•Start-up time / change to RPM: < 0.2 sec
•Wow and flutter: 0.01% WRMS*
•S/N ratio: > 55 dB (DIN-B)
•Brake system: electronic brake

Platter:
•Material: die cast aluminium
•Diameter: 332 mm
•Weight: approx. 1.5 kg

Tone arm:
•Type: universal, static balanced, S-shaped
•Effective length: 230 mm
•Overhang: 15 mm
•Tracking error range: < 3°
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•VTA setting range: 0 - 6 mm
•Usable weight of pick-ups: 3.5 ~ 8.5 g (incl. headshell 13 ~ 18 g)
•Anti-skating range: 0 - 3 g
•Effective tone arm mass: 30 g

Connections:
•1x PHONO/1x LINE out (gold-plated), 1x GND earth connection, 1x USB port (type B)

General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power consumption: 17 W
•Dimensions: 458 (w) x 354 (d) x 144,6 (h) mm
•Weight: approx. 11.8 kg
•Incl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1200MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model.

The SL-1200 – A New Chapter Begins
As the go-to choice of DJs the world over, the SL-1200 Series has long been a dominant presence on the global music scene. Today the brand continues to set the industry standard as the direct drive turntable par excellence.
*European Market Model No. is SL-1210MK7

The Relentless Pursuit of Perfection
The SL-1200 Series has constantly evolved with the times to meet the exacting requirements of DJs everywhere. It epitomizes Technics’ unwavering dedication to quality engineering that fuses sound, technology and design.

Features:
Significance
of the SL-1200
The SL-1200 Direct Drive Turntable has continued evolving as the world standard DJ turntable. It is the mission imposed only on SL-1200 series.

Rediscover Music for All
Technics has pursued all possibilities for delivering a premium music experience to all music fans, and will continue to do so into the future. This commitment is also demonstrated clearly in the SL-1200MK7. Packed with accumulated technologies and knowhow, it aims to contribute to the further development of the club DJ culture.

D.D.Motor:
The Direct Drive System That Pioneered the DJ Culture
The direct drive motor (D.D. Motor) formed the core of the SL-1200 Series. In addition to providing unparalleled accuracy, the D.D. Motor technology that was introduced in 1970 offered reliability for long-term use with its excellent durability. This further evolved with the SL-1200MK7, and achieved even higher sound quality as the Coreless Direct Drive Motor.

Tonearm:
S-shaped Tonearm, a Technics Tradition
The SL-1200MK7 comes with a static balance S-shaped tonearm to carry on the Technics tradition. The tonearm moves in a unique arc as it tracks the record disc, and reproduces music with high fidelity. The bearing section features a high-precision bearing structure. The tonearm provides high tracking performance without stylus skipping even under hard usage such as scratching.

Insulator:
Stable Operation under All Conditions
Each insulator foot consists of an internal spring and rubber, and the bottom surface is covered with a cushion material. They effectively shut out vibration even in a loud sound environment. If the turntable cannot be set up on a perfectly level surface, its height and inclination can be adjusted by turning individual insulator feet.

Pitch Contorol:
Pitch Control for a New Chapter in Music History
Pitch control on the SL-1200 was originally utilised for the precise adjustment of rotation speed. Club DJs began using this function to match the pitch between two tracks to achieve smooth transition. This technique led to the explosive popularity of the SL-1200 worldwide. The current vertical fader was first installed on the SL-1200MK2. This change was made to simplify use for DJs. The MK7 has newly incorporated full digital control to enable accurate and stable adjustment within the range of ±8/16%.

Stylus Light:
User-friendly Stylus Light
The light that illuminates the stylus and its position on the record was featured for the first time on the SL-1200MK2. Technics opted for a popup-type light, not a detachable type, for easier use. The SL-1200MK7 comes with a white LED that offers high brightness and a long life. The illumination was improved and its range was reviewed to ensure optimal visibility.

Strobe:
Symbol of the SL-1200 Series
The original purpose of the strobe light, a standard feature on all models from the first-generation SL-1200, was to enable an accurate visual adjustment of the rotation speed. Since Technics incorporated quartz control, in models starting with the MK2, the rotation speed became extremely stable; thus, there was no need for the strobe anymore. However, DJs wanted the familiar strobe on the turntables they use, so it is still provided on the current model. The SL-1200MK7 comes with an LED strobe that can be set to illuminate in red or blue

Sound and Design:
Sound Quality Backed by Functional Beauty
The SL-1200 Series was originally developed in pursuit of pure audio performance. The vibration-absorbing cabinet and insulators suppress undesirable noise, while the gimbal suspension tonearm provides high tracking performance for high-fidelity sound reproduction. The design has not been changed much for more than 40 years, thus retaining the ultimate functional beauty achieved in the first-generation model. The SL-1200MK7 has also further unified the all black design scheme, even in every part, to become more stylish and attractive.

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual