DJ Equipment 1791 Items

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

If you love your vinyl goodies, you'll brush 'em with the Velvet Brush to clean and dust 'em. Also, this tool eliminates most of the static charge, so there's no chance for dust to make itself comfortable on the grooves. Mini saphir brush to clean the velvet surface also included.

Go to Item

HF 125 DJ Headphones

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

CLARITY AND COMFORT FOR THE MODERN DJ

One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.

Go to Item

Pro S Stylus

35,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Entry-level cartridge for all-purpose use

New DJ? This entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 26 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

Go to Item

Pro Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

General purpose model for scratch and back-cueing

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for. It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music.

Output voltage at 1000Hz, 5cm/sec.
5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
20 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-20.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
70 μm
Compliance, dynamic lateral
7 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
PRO cartridge weight
18,5 g

Go to Item

Om Pro S System

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Headphone Logo Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

black slipmat with white headphone logo

Go to Item

DJ S Stylus

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

DJ S is a solid-built cartridge in a new blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

Output voltage at 1000Hz, 5cm/sec.
6 mV
Channel balance at 1kHz
2 dB
Channel separation at 1kHz
23 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz 3dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
9 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g
Compatibility
DJ Series

Go to Item

Scratch Stylus

49,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by various DJs. Especially developed for scratch and back-cueing. Very high output!

As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing. Like the QBert, DJs had a say in designing this cartridge so it would match the needs of dance floor kings.

It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task.

Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec.
7 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
5 g

Go to Item

Q-Bert Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Co-designed by DJ Q.Bert for scratch and back-cueing. High tracking ability. Ultra high output

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own.

Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Output voltage at 1000Hz, 5cm/sec.
11 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
•
Frequency range at -3dB
20-18.000 Hz
Frequency response
20-18.000 Hz -3 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
20°
Internal impedance, DC resistance
1.680 Ohm
Internal inductance
920 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-400 pF
Cartridge weight
18,5 g

Go to Item

Ultimate SlingBag MK2

129,99 €*

7" Single Puck (Edelstahl)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Sling Bag is a functional bag with a minimalist design. It's water-resistant, padded for maximum protection of your beloved vinyl goodies, and stores about 45 12" records as well as 24 CD copies in two folders.

UDG Sling Bag - features:

• 2 CD folders for 24 CD copies, each stored in the front compartment
• front and side pockets for accessories
• rugged top handle
• padded and PVC-backed walls
• adjustable and padded shoulder strap
• UDG security lock
• rubber details at bottom to protect the fabric
• dimensions: approx. 32 x 40 x 25 cm
• shell: 100% nylon
• lining: 100% polyester

Go to Item

45 RPM Adapter

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 7 Inch Single Puck is the companion piece of your big hole 7 inch records, made with high-grade steel.

Made in Germany

Go to Item

Concorde Fingerbügel (Paar)

9,90 €*

7" Single Puck (halbrund) (Edelstahl)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ortofon Fingerbügel is a rubber coat for all Concorde cartridges to avoid the slipping of the tone arm. 2 pieces included.

Go to Item

45 RPM Adapter

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The curved 7 Inch Single Puck is the companion piece of your big hole 7 inch records, made with high-grade steel.

• Weight: approx. 140 g.
• Ø 37 cm
• Height: ca. 23 mm.

Made in Germany

Go to Item

Magma

LP-Bag 40 II

53,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Jamaica Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

slipmat in the shape of the Jamaican flag with black Technics writing

Go to Item

Logo Slipmat

16,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics Slipmat is made from lightweight felt and equipped with a timeless graphic print that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

Go to Item

Mirror 1 Logo Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

black slipmat with mirrored white writing

Go to Item

Headshell 1 Logo Slipmats

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

black slipmat with white logo and weapon

Go to Item

Elektro Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Techno cartridge co-designed by DJs. Rubber tube especially developed for scratch and back-cueing. Very high output. Every professional ought to try the Electro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches. Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio. Unaffected by extreme sound pressure and repeated vibrations, it has a high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.

Ortofon Elektro Replacement Styles - Specs:

Output voltage at 1000Hz, 5cm/sec.
7.5 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
25 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-22.000 Hz
Frequency response
20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force
80 μm
Compliance, dynamic lateral
6 μm/m N
Stylus type
Spherical
Stylus tip radius
R 18 μm
Tracking force range
3,0-5,0 g (30-50 mN)
Tracking force recommended
4,0 g (40 mN)
Tracking angle
20°
Internal impedance, DC resistance
750 Ohm
Internal inductance
450 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge weight
18,5 g

Go to Item

Night Club MKII E/E Ersatznadel

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

DigiTrack Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The world's first needle designed specifically for coded vinyl with low wear!

The DigiTrack is the perfect marriage of easy and function. You can now manupulate MP3's with the style and feel of a turntablist and the tradition of a turntable.

The DigiTrack responds to the generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

High output and the best mix and scratch ability!

Output voltage at 1000Hz, 5cm/sec.
8 mV
Channel balance at 1kHz
1,5 dB
Channel separation at 1kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range at -3dB
20-20.000 Hz
Frequency response
20-18.000 Hz +3 dB/-2 dB
Tracking ability at 315 Hz at recommmende tracking force
90 μm
Compliance, dynamic lateral
12 μm/m N
Stylus type
Spherical
Stylus tip radius
• -
Tracking force range
2,0-4,0 g (20-40 mN)
Tracking force recommended
3,0 g (30 mN)
Tracking angle
•
Internal impedance, DC resistance
•
Internal inductance
•
Recommended load resistance
•
Recommended load capacitance
•
Cartridge weight
18,5 g

Go to Item

Arkiv Stylus

50x 12" Record Outer Sleeves

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ausgangsspannung bei 1000Hz, 5cm/sec.
6 mV
Kanalbalance bei 1kHz
2 dB
Kanaltrennung bei 1kHz
23 dB
Kanaltrennung bei 15 kHz
15 dB
Frequenzbereich bei -3dB
20-22.000 Hz
Frequenzgang
20-20.000 Hz +/- 2 dB
Rillenfestigkeit bei 315 Hz mit empfohlener Auflagekraft
80 μm
Nadelnachgiebigkeit, dynamisch, seitlich
9 μm/m N
Nadeltyp
Special Elliptical
Durchmesser Nadelspitze
r/R 13/25 μm
Auflagekraftbereich
2,0-4,0 g (20-40 mN)
Auflagekraft empfohlen
3,0 g (30 mN)
Tracking Neigung
20°
Interne Impedanz, Gleichspannungswiderstand
750 Ohm
Interne Induktion
450 mH
Lastwiderstand empfohlen
47 kOhm
Belastungskapazität empfohlen
200-600 pF
Tonabnehmergewicht
18,5 g

Go to Item

Außenhüllen (0,15mm / Made in Germany)

10,59 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 50 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

Go to Item

Tonarmwaage

9,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ortofon Tonarmwaage is a scale that helps to adjust the perfect tone arm weight. A great tool for perfectionists! Range: 0.8 up to 3.0 g.

Go to Item

Archifix Box 50 LPs

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Archifix Box was made to organize your record collection and store up to 50 12 inch vinyl pieces. Dimensions: approx. 180 (B) x 345 (H) x 330 (T) mm.

Made in Germany!

Go to Item

Ecler

Nuo 2.0

415,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the mixed music style.
Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features!

Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.

Key features:
• 2 mixing channels
• 1 MICRO/LINE channel
• 2 PHONO inputs
• 3 LINE inputs
• Master output XLR and RCA
• Booth output RCA
• 3 band full cut EQ
• Extra large ergonomic EQ knobs
• 3 band EQ kill switches
• FX Send control per channel
• FX Pre/Post fader selector
• 45mm long life VCA faders
• 45mm long life VCA crossfader
• Fader and crossfader shape adjustment
• Crossfader Reverse and Cut-In
• Crossfader suitable for ETERNAL

Technical data:
• Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kΩ
PHONO: -40dBV/50kΩ
MICRO: -50dBV/>1kΩ
FX RETURN: 0dBV/>6kΩ

• Outputs Level/Minimum Load:
MASTER (BAL): 0dBV/600Ω 1V *(+6dB 2V)
MASTER (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
BOOTH (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ

• Frequency Response:
LINE: 10Hz÷30kHz -1dB
MICRO: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB

• THD+N:
LINE: <0.07%
MICRO: <0.1%
PHONO: <0.15%
FX RETURN: <0.05%

• CMRR:
MICRO: >70dB @ 1kHz

• Signal Noise Ratio:
LINE: >95dB
MICRO: >85dB
PHONO: >90dB
FX RETURN: >100dB

• Gain control:
INPUTS 1-2: ± 15dB
INPUT 3: ± 20dB

• Tone control Inputs 1-2:
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

• Tone control Input 3:
BASS: ± 15dB
TREBLE: ± 15dB

• Kill Filter, cut frequency at –6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz÷6.8kHz
TREBLE: 6.8kHz

• Phantom voltage: +18VDC/5mA max.
• Mains: 90-264VAC 47-63Hz
• Power consumption: 30VA
• Dimensions: 370x165x80mm
• Weight: 3kg

Go to Item

Adam Hall

Laptop Stand BLACK

7" Single Vinyl Cover (Mittelloch) (Weiß)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Thanks to its adjustable Height the Adam Hall Laptop Stand will offer every DJ flexibility to the fullest!

• Material: Steel
• Material Thickness: 2 mm
• Surface: Black coated
• Height: adjustable 165 - 280 mm
• Adapted for all laptop formats (12" – 17")

Go to Item

Record Sleeve

7,99 €*

50x 10" Record Inner Sleeves

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Blank, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 90 mm centered
• selling unit: 20 pieces
• Made in Germany

Go to Item

Innenhüllen (antistatisch / weiß 90 g/m²)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pure white paper inner sleeve for storing 10 inch records. This inner sleeve is lined with anti-static high density polyethylene (18µ), equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening. It's suited for 25 cm diameter vinyl and Schellack records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 10" Vinyl Innenhüllen (anti-statc) - specific details:

• measures: 258 mm x 258 mm
• material: 90 g/m² pure white premium paper and polyethylene
• die-cut diameter: 100 mm centered
• anti-static
• selling unit: 50 pieces
• Made in Germany

Go to Item

Ultimate SlingBag Trolley DeLuxe MK2

199,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Sling Bag Trolley Deluxe is equipped with the following features:

• stows approx. 60 12" vinyl records
• 2 CD folders (each one stows up to 24 CDs)
• rugged nylon upper
• front and side pockets with zip closure
• sturdy top handle
• adjustable, padded shoulder strap
• UDG security combination lock

• Weight 4,50 kg / 9.9 lbs
• Outer Dimensions cm: 40 x 45.5 x 31 | inch: 15.7 x 17.9 x 12.2
• Inner Dimensions cm: 31.5 x 32 x 20 | inch: 12.4 x 12.6 x 7.9
• Material Water Resistant Nylon 420D
• Protection Foam padded main compartment
• Extra's Retractable handle with 3 stage internal trolley system.
• Large front pocket + 2 side pocket for Accessories and smaller gears.
• Smooth rolling in-line wheels.
• Integrated combination lock.
• UDG Headphone Bag can buckled up.
• Fits 60 LP's or 1 CD Wallet 128 + 1 CD Wallet 280 or 1 CD Wallet + CD Player of MIDI Controller. Trolley fits up to 13" laptop.

Go to Item

Moon Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Strobe Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Simple Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Simple Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moon Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Moon 3 Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

100x 7" Record Inner Sleeves

Innenhüllen (weiß)

9,99 €*

10" Vinyl Cover (Mittelloch) (Weiß)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Paper inner sleeve for storing 7 inch records. This inner sleeve is equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen (Mittelloch) - specific details:

• measures: 180 x 180 mm
• material: paper
• die-cut diameter: 80 mm centered
• selling unit: 100 pieces

Go to Item

Record Sleeve

15,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Blank, unprinted cardboard sleeve for storing 10 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 25 cm diameter vinyl records as well as Schellack records, including lined or unlined inner sleeves.

Record Sleeve 10" Vinyl Cover (Mittelloch) - specific details:

• measures: 265 mm x 265 mm x 3 mm
• material: 300 g GC1 cardboard
• die-cut diameter: 100 mm centered
• selling unit: 25 pieces
• Made in Germany

Go to Item

Digi BackPack

189,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The UDG Digi BackPack was specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style. A cleverly designed side entry compartment for a laptop up to 15.4 inch allows access without having to rummage through the main body of the bag. The spacious main compartment can hold an extra laptop or used for magazines/paperwork whilst in transit.
The front compartment features a detachable interface pouch and accessories organizer pocket. There are also 5 additional exterior pockets that provide storage for personal items, one of these has an ear bud access point with a hinged storage pocket so that you can listen to your mp3 player whilst on the go.

UDG Digi BackPack - specifications:

• water resistant nylon 450D shell
• easy access size entry padded compartment for 15.4 inch laptop with vertical file organization
• main compartment for laptop, LPs, books or magazine
• front compartment with organization panel and detachable pouch for audio interface
• 5 exterior pockets for personal essentials, including one with ear bud pass-through for mp3 players and unique hinged headphone pocket
• S-curved shoulder straps for ultimate comfort
• outer dimensions: approx. 33.5 x 48 x 27 cm (13.2 x 18.9 x 10.6 inch)
• inner dimensions: approx. 30 x 42 x 13 cm (11.8 x 16.5 x 5.1 inch)
• weight: 1.8 kg (4 lbs)

Go to Item

Producer Bag Large

199,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Inspired by the legendary UDG Producer Bag, the UDG Ultimate Producer Bag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

The UDG Producer Bag Large offers increased space for performers using laptops up to 18.4 inch and larger MIDI controllers.

Constructed from high quality fabrics, the backpack style UDG Producer Bag Large features padded walls with an adjustable divider so that you can create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

UDG Producer Bag Large - specifications:

Weight 3,25 kg / 7.15 lbs
EAN 8717228276675
Color Black, Orange inside
Outer Dimensions (W x H x D) cm: 46 x 56 x 25 | inch: 18.1 x 22 x 9.8
Inner Dimensions (W x H x D) cm: 32 x 46.5 x 15 | inch: 12.6 x 18.3 x 5.9
Material Water Resistant Nylon 420D
Protection Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.
Extra's 6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.
Fits Up to 18.4" laptop,
Pioneer Toraiz SP-16, DJS-1000, DJM-750MK2,
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2,
Denon DJ Prime Go, MC6000 MK2, MC3000,
Numark iDJ Live II, Mixtrack II / Pro II,
Rane Seventy, Seventy-Two,
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32,
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2,
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25,
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S,
M-Audio Oxygen 25, Trigger Finger Pro, Xponent,
Stanton SCS.4DJ, DJC.4,
Livid OHM 64,
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25,
various pedalboards,

Go to Item

Compost

45 Twister

17,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 45 Twister is the ultimate tool for every DJ playing 45 singles (7“). This product guarantees that the 7 inches are able to scratch, mix and cut perfectly as a 12 inch! Beatjuggling, contest scraching – no problem anymore! The 45 Twister works on every turntable, because it is a precision product made in EU of best stabile material, perfect measured 45 compatible, plus a super soft-rubber surface mat. This high grade tool guarantees the fastest and safest way to play your 7 inches. The 45 Twister was developed and designed by DJ Enne. The base colour of the 45 Twister is: Transparent with slight glitter!

Approved by Florian Keller, DJ Mirko Machine, Jon Kennedy & others!

Just in case the middle hole is tight:
Take a scissor , put it from bottom in the hole, screw it 2-3 time slightly, test it, if still too tight, repeat it. Then it should fit perfectly.

Go to Item

Creator Cartridge Hardcase

29,00 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A Digital DJ looking for a professional, durable case solution for your turntable cartridges? Then look no further, UDG developed a super light EVA hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches and liquids. This case is perfect for the traveling DJ that needs to protect their cartridges.

UDG Cartridge Hardcase - specifications:

• Durashock molded EVA foam
• fits DJs cartridges (Shure, Ortofon, Stanton, etc.)
• easy grip zipper puller
• dimensions: approx. 24.5 x 13.5 x 5.5 cm (9.6 x 5.3 x 2.2 inch)
• weight: approx. 0.26 kg (0.6 lbs)

Go to Item

CD-Player/Mixer Dust Cover

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

UDG CD Player/Mixer dust cover made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your gears from dust and liquid drops.

UDG CD-Player/Mixer Dust Cover - features:

• fabric: water-resistant nylon 210D
• UDG logo printed in plastisol
• fits CD player/mixer
• protect various equipment
• outer dimensions: approx. 32 x 38 x 13 cm (12.6 x 15 x 5.1 inch)
• weight: approx. 0.09 kg (0.19 lbs)

Go to Item

Headshell

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Headshell (Technics Bauform)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

One-Two Mixed Set Slipmat

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics One-Two Mixed Set Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

Go to Item

Berlin Slipmat (2 Pieces)

16,90 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Technics Berlin Slipmat is made of anti-static felt and equipped with a graphic print to make your turntable look good, even when it's temporarily out of action.

Go to Item

Wasserwaage Libelle

9,90 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Ortofon Libelle is a water level that helps to adjust the head shells or to counterbalance the turntables, CD player and other high fidelity equipment.

Go to Item

Alignment Tool SME-Schablone

7,90 €*

Available Sizes: One Size

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Go to Item

Vinyl Divider 12"

3,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Tape

129,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Vinyl Set Holder Superior (25)

50x 12" Record Outer Sleeves

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl Set Holder accommodates 25 LPs and is a real solid luxury record holder made of solid metal - simply a shapely fitment for all vinyl lovers. The most beautiful solution for presenting one''s records.

Technical Data
•Incl. fixing accessories

Features
•Holds up to 25 records
•Solid metal
•Easy assembly

Go to Item

Außenhüllen (0,10mm / Premium Deluxe / High Clear)

22,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With this high clear record protective sleeve, you can minimize the risk of the record cover getting ring wear, without blurring the view to the artwork. These premium deluxe sleeves also protect against dust and dirt, they are suitable for 30.5 mm diameter vinyl records and made from transparent high clear polypropylene.

Record Outer Sleeve 12" Vinyl Records Premium Deluxe (High Clear) with flap closure - specific details:

• dimensions: 325 x 315 x 0.1 mm
• material: transparent high clear polypropylene
• selling unit: 50 Stück

Go to Item

Record Box Advanced 110

37,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Vinyl Storage

LP Winkel 80 (Set of 2)

21,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

LP Winkel im Doppelpack 2er Set aus Kunststoff für 80 LPs

317 x 317 x 160 mm

Schrauben für die Wandmontage sind nicht im Lieferumfang enthalten.

Go to Item

Vinyl Storage

7" Album (20)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Single Album mit press button for 20x 7" singles.

Dimension BxTxH: 205 x 205 x 40 mm

Größe BxTxH: 205 x 205 x 40 mm

Go to Item

Vinyl Storage

LP Album (12)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pioneer DJ

PLX-1000

769,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

A REBORN CLASSIC.
The PLX-1000 is precision engineered for the booth, drawing on 50 years’ experience of making high-end turntables. This high-torque direct drive turntable is equipped with a classic layout and a rubber-lined, S-shaped tone arm that improves isolation and prevents feedback. It is solidly built for excellent vibration damping and ultra-precise, high grade audio playback.

Featuring next generation improvements, the PLX-1000 is the perfect score for professional DJs and vinyl enthusiasts. Combine this turntable with your Pioneer DJM mixer and get the ideal DJ system set-up.

TURN THE TABLES
The high-torque direct drive makes sure that your tracks reach a rotation speed of 33⅓ rpm in merely 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more). Plus it ensures stable rotation and exceptional control.

PICK UP THE PACE
Unique to this turntable is the multi-pitch tempo control. Next to a standard variable width of ±8%, you can also select a variable width from ±16% and ±50%. A simple reset button instantly reverts to the fixed rotation speed at ±0%.

EASILY CONNECTED
For low impendance and amazing sound quality output, you can easily connect to the professional-grade, gold-plated RCA jacks. Ideal for a DJ on the road, the PLX-1000 has interchangeble power and audio cables.

ncluded Accessories
Turntable sheet
Slip mat and sheet
Dust cover
Head shell
Balance, sub and shell weights
Audio cable
Ground wire

Width
453 mm
Height
159 mm
Depth
353 mm
Weight
13.1 kg
Power Requirements
220-240 V / 50/60 Hz

Drive Method
Quartz lock, servo-type, direct drive
Platter
Aluminium, die-casting diameter: 332 mm
Motor
3-phase, brushless DC motor
Braking System
Electronic brake
Rotation Speed
33⅓-45 rpm
Rotation Adjustment Range
±8, ±16, ±50 %
Wow and Flutter
<0.01% (Measured by obtaining signal from built-in frequency generator of motor assembly.)
Signal-to-Noise Ratio
70 dB
Starting Torque
> 4.5 kg/cm
Start Time
0.3 sec (at 33⅓ rpm)

Arm Type
Universal type S-shape tone arm
Gimbal-supported type bearing structure
Static balance type
Overhang
15 mm
Effective Length
230 mm
Tracking Error
Within 3°
Height Adjustment Range
6 mm
Stylus Pressure Variable Range
0-4 g (1 scale 0.1 g)
Single Cartridge Weight
3.5-13 g

Go to Item

Magma

Headshell-Case

19,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Lamp Plate SFUP122-03

5,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Neon (for Serato DJ)

114,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

100x 7" Record Inner Sleeves

Innenhüllen Deluxe (weiß 90 g/m²)

12,99 €*

Technics RP-DJ 1200 / 1210 Velour

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Deluxe paper inner sleeve for storing 7 inch records. This inner sleeve is made from 90 g/m² offset paper and equipped with a centered die-cut hole, so label infos are available at first glance, and it's suited for 17.8 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 7" Single Vinyl Innenhüllen Deluxe - specific details:

• measures: 180 x 180 mm
• material: offset paper, 90 g/m²
• die-cut diameter: 80 mm centered
• selling unit: 100 pieces
• high-quality product, made in Germany

Go to Item

Zomo

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-08

7" Single Vinyl Cover (Mittelloch) (Schwarz)

Record Sleeve

7,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Black, unprinted cardboard sleeve for storing 7 inch records. This cover is equipped with a centered die-cut hole, so label infos are available at first glance. This sleeve is also perfect for getting printed or inscribed, and it's suited for 17.8 cm diameter vinyl records, including lined or unlined inner sleeves.

Record Sleeve 7" Single Vinyl Cover (Mittelloch) - specific details:

• measures: 185 mm x 185 mm x 3 mm
• material: 300g GC1 cardboard
• die-cut diameter: 80 mm centered
• selling unit: 20 pieces
• Made in Germany

Go to Item

M6 USB

249,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

M6 enables you to step up to a four-channel mixer. This club-style design not only works with any standard audio sources including turntables and CD players, but it also has a USB computer connection. When connected to your Mac or PC, the plug-and-play connection empowers you to mix in audio in from music-player software and record your sets into virtually any audio recording application.

You will enjoy a complete range of performance essentials in M6, including three-band EQ and LED metering per channel. M6 has a replaceable crossfader with slope control, and you can assign any channel to either side of the crossfader.

You can talk over the mix with M6’s dedicated XLR microphone channel and a secondary mic input on channel four. And for the best possible sound, M6 has balanced outputs.

Get all the flexibility of a four-channel mixer plus the power of computer connection with M6.

FEATURES

Four input channels, each with gain, three-band EQ, and LED metering
USB computer connection for playing and recording with Mac or PC
Play music from music-player software
Record your mix to your computer
Multiple phono, line, and mic inputs
Dedicated XLR mic channel and additional mic input on channel 4
Replaceable crossfader with slope control
Assign any channel to either side of the crossfader
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M6 USB Mixer
Power Cable
Quickstart Guide

Weight: 9.6 lbs
Dimensions (WxDxH): 12.625" x 14.25" x 4"

Go to Item

M101 USB BLACK

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Get up and running quickly at any gig.

READY FOR DIGITAL OR ANALOG

DJs always need a dependable mixer. M101USB fits the bill perfectly as a highly adaptable two-channel mixer for virtually any DJ. M101USB lets you get up and running quickly whether you’re using a computer, turntables or CDs. M101USB is right at home at weddings, parties, clubs and everything in-between.

MIX YOUR MUSIC YOUR WAY

Beginners and seasoned DJs alike who want a durable USB-equipped two-channel solution will find M101USB a perfect fit. M101USB builds on the two-channel M101 mixer with the addition of an easy-to-use USB audio interface for DJs who want the option of working with their computer as well as traditional analog I/O.

TWEAKABLE TUNES

Beyond simply mixing, M101USB has a built-in EQ so that you can fine tune your mix depending on the room or the tracks themselves. Two pairs of switchable Phono/Line inputs are included along with a crossfader, ¼” mic input and stereo RCA line output for connection to an amplifier, powered speakers or another mixer. M101USB can be rack-mounted and features Numark’s legendary industrial-grade durability.

GET CONNECTED

Connecting M101USB to your computer is a snap using a single USB cable. Once connected you can use your computer as an audio source or record your sets straight to your computer's hard drive. If you're a computer DJ on the move and need solid, dependable two-channel performance, look no further than the M101USB mixer.

FEATURES

Two-channel rack-mountable mixer with USB
USB audio built in for playing from or recording to your computer
Two pairs of Phono/Line inputs
Built-in 2-band EQ for quick, easy sound tweaks
1/4-inch Mic input for voiceovers and announcements
Stereo Output for easy connection to amps, powered speakers or another mixer
Class Compliant: this product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems.
INCLUDES

M101USB Mixer
Power Supply
Quickstart Guide

Manual: http://www.numark.com/images/product_downloads/m101usb___quickstart_guide___v1.0.pdf

Go to Item

Magma

LP-BAG 40 II

55,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-11-22

M2 BLACK

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

M2 is a two-channel DJ scratch mixer with all the essentials to hit the stage in Numark style.

FEATURES

Inputs: two phono/line switchable (RCA), two line (RCA), mic (1/4")
Outputs: Master (RCA), Record (RCA), Headphone (1/4" stereo)
Three-band EQ and gain on each channel
EQ and gain on mic channel
Replaceable crossfader with reverse and slope-controls
Crossfader-style cueing

Switchable phono/line inputs for turntables, CD players, and other line sources make M2 a superb choice for any DJ setting from weddings to clubs, parties to practice setups. A mic input with dedicated EQ and gain, and a headphone output with crossfader-style cueing complete the plentifully featured package.

Three-band EQ on each channel plus crossfader-reverse and slope controls give you all the tools you need to drive your audience from behind the wheels of steel. M2 is the perfect mixer for any scratch DJ.

Product Dimensions: 11.4" x 9.5" x 3.6"

Manual: http://www.numark.com/images/product_downloads/m2_quickstart_guide_v1_0.pdf

Go to Item

ATN95E Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for AT95E cartridge

The ATN95E is also compatible with discontinued models AT93 and AT95.

Go to Item

ATH-M50x

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Detachable cable (3 cables included)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Frequency Response: 15 - 28,000 Hz
• Max Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Folding/collapsible: Yes
• Weight: 10 oz (284 g) without cable/connector
• Cable - Detachable: Yes
• Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Accessories included: Screw-on 1/4” adapter, pouch

Go to Item

Record Box Advanced 110

37,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATH-M40x Headphones

114,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

Cutting-edge engineering and robust construction
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned flat for incredibly accurate sound monitoring across the entire frequency range
Circumaural design contours around the ears for excellent sound isolation in loud environments
90° swiveling earcups for easy, one-ear monitoring
Professional-grade earpad and headband material delivers more durability and comfort
Detachable cable (2 cables included)

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 24,000 Hz
Max Input Power: 1,600 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: (Without cable) 8.5 oz (240 g)
Cable - Detachable: Yes
Cable Includes: 1.2m-3m coiled, 3m straight cablesConnector Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M30x Headphones

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced detail, with excellent mid-range definition
Circumaural design contours around the ears for excellent sound isolation in loud environments

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 22,000 Hz
Max Input Power: 1,300 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 47 ohms
Folding/collapsible: Yes
Weight: (Without cable) 7.8 oz (220 g)
Cable - Detachable: No
Cable: 3 m (9.84’) Straight cable, left-side exit
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

Go to Item

ATH-M20x

54,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessory Included: 6.3 mm (1/4") snap-on adapter

Go to Item

Vinyl Cleaning Workmat

12,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The analogis Vinyl Workmat is a pad for the professional cleaning of vinyl ecords and CDs. It works best with analogis DeDuster 3345.

Go to Item

Vinyl Stabilizer

44,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

760 g layer weight to stabilize vinyl records.
Ø 70mm

Go to Item

DeDuster Vinyl Silikon Roller

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The analogis DeDuster Vinyl Silikon Roller was made to clean vinyl records. It's washable and durable, it'll clean your records for ages.

Go to Item

Vinyl Trockenreinigungsarm Carbon

17,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The vinyl dry cleaner is equipped with a sticky bottom, so it's easy to handle on a record player. Thanks to the ground cable, the adjustable Vinyl Trockenreinigungsarm eliminates static charge.

Go to Item

Lager-Öl

10,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Special synthetic lube oil for turntable plate bearing with excellent viscosity. Content: 4 ml.

Go to Item

Vinyl Stabilizer

44,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

760 g layer weight to stabilize vinyl records.
Ø 70mm

Go to Item

Headshellkabel "HC Gold"

6,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Set of 4, interior conductor: 99.99999% pure copper, gold-plated jacks.

Go to Item

Acryl Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Headshell HS-10 (Technics Bauform)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

aluminum, weight: 9g.

Go to Item

Headshell HS-11 (Technics Bauform)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

aluminum, weight: 9g.

Go to Item

Headshell HS-15

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

Go to Item

Headshell HS-16

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Sturdy SME construction, high-quality cables with gold-plated ports; weight: 8g.

Go to Item

Disco-Antistat Trockenständer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Drying stand for vinyl record cleaning.

Made in Germany!

Go to Item

Disco-Antistat Gehäuse mit 2 Bürstchen

22,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement case for record cleaner, two brushes included.

Made in Germany!

Go to Item

Disco-Antistat Etiketten-Dichtschalen

9,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Label protector for record cleaner.

Made in Germany!

Go to Item

10 Stylus

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Ortofon Stylus 10 - technical data:

• Frequency range 20-24.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 25 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Tracking force range 1.25-1.75 g (12.5-17.5 mN)
• Tracking force, recommended 1.5 g (15 mN)
• Tracking angle 20°
• Stylus color Black
• Recommended for following cartridges: Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, TM 10H, LMB 12, SMB 12, LMA 12, Concorde STD, Dual ULM 65E, Dual ULM 66E

Go to Item

Pro-Ject

Staubschutzhaube Typ 1

32,50 €*

TMA-2 Headbands H01 "Polycarbonate PU foam padding"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pro-Ject standard dust cover Type 1, suitable for chassis like Debut, 1, 1.2, Xpression.

Go to Item

AIAIAI

TMA-2 Cables C02 "coiled w/Adapter 1.5m length"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The slim AIAIAI TMA-2 Headband H01 is made from H01 polycarbonate (SKU 01201) and equipped with PU foam padding for high comfort.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

Go to Item

AIAIAI

33,99 €*

TMA-2 Cables C05 "straight"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AIAIAI TMA-2 Cable C02 is a coiled cable with adaptor (SKU 01302). 4 mm/1.5 m.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

Go to Item

AIAIAI

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The AIAIAI TMA-2 Cable C05 is a straight cable. 4 mm / 1.5 m.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

Go to Item

Stylus 2M Red

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Technical data:
• Frequency range 20-22.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Red
• Recommended for following cartridges 2M Red / 2M Red Verso(Interchangeable with 2M Blue / 2M Blue Verso)

Go to Item

5E Stylus

49,00 €*