DJ Equipment 663 Items

RS-LP2 ANTI-STATIC RECORD SLEEVES

More than 35 years ago Nagaoka added them to its program under the type designation No. 102. Because they were the best. And today, in the third development generation called RS-LP2, Nagaoka still sells them - for the same reason!

More effective than any other product, the RS-LP2 prevents the vinyl from static electricity, making it easier to remove the record, protecting the groove from damage caused by dust and preventing the unsightly audible static discharge during playback. Give it a try!

• static charge is prevented
• protects your 12" vinyl records from dust damage
• the smooth cover prevents damage to your records
• one package contains 50 pieces
• Dimensions approx.: 308 x 308 mm, rounded on one side
• Made in Japan

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish

Spare parts package for the record washers Generation II + Generation II PLUS.

• 1 sealing shell incl. crank axle *NEW* with 105mm diameter *NEW*
• 2 sealing rings
• 2 spare brushes
• 2 screws for axle holder
• 2 axle holders
• 1 set of non-slip rubber feet

Also suitable as upgrade from Generation II to II PLUS!

Made in Germany!

The Zomo Divider is an optional accessory for the Zomo-VS-Boxes and the deckstand Vegas. It can be used to divide the LP-compartments into four sub compartments for cds and dvds.

Features:
• Extension of the Zomo VS-Boxes series with CD and DVD compartments
• Capacity: 40 - 80 CDs or 20 CDs + 20 DVDs
• Material: MDF wood fibreboard
• Unique design
• High-quality workmanship
• Great optics

Specifications:
• Dimensions: 329 x 319 x 339 mm
• Weight: 3 kg

Suitable for the following Zomo products:
• Zomo Deck Stand Vegas
• Zomo VS-Box 100
• Zomo VS-Box 100/2
• Zomo VS-Box 100/4
• Zomo VS-Box 200
• Zomo VS-Box 200/2
• Zomo VS-Box 400

Format:
• 7" Singles
• CDs
• LPs

Smooth running of the record ensures high sound quality without acoustic disturbances. Our aluminum record stabilizer weighs 420 g and distributes the weight evenly on the record. The increased contact pressure of the vinyl on the turntable ensures more even scanning.

You can use the Stabilizer universally for all turntables. We deliver the weight including a box for safe storage.

Vinyl Care by HHV was developed for the special needs of passionate vinyl collectors. Each product incorporates the experience and wishes that we at HHV have gathered in countless conversations with customers. All Vinyl Care products are delivered in stylish packaging and are also suitable as a gift idea for record lovers.

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

Our popular aluminium record stabilizer is finally available in the trendy color gold. The 416-gram stabilizer weight can be used universally for all record players. It increases the contact pressure of the record on the platter and thus ensures more even tracking. The stabilizer is supplied in a practical storage box.
We have developed the Vinyl Care by HHV product range especially for vinyl collectors who are looking for practical and stylish care products for their records. All products make excellent gifts.

AT-VMN95E
VM95 SERIES ELLIPTICAL REPLACEMENT STYLUS
Aluminium cantilever
Elliptical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

djay and invisbl skratch pikls present FUGITIVES OF FUNK djay Control Vinyl (12" Orange).

16 Tracks from DJ Q-bert, Shortkut and D-Styles on STOKYO Thin Press©️ Orange 12" Vinyl

SIDE A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove
SIDE B:

Official Control Vinyl djay algoriddim Tone (10.00)
Produced by Q-Bert, Shortkut & D-Styles

Manufactured by STOKYO 2023 in collaboration with DIRTSTYLE RECORDS, Made in JAPAN

STOKYO has been working on control vinyl for the past 15 years. From our team of DJs, engineers, material experts, and many more involved, we are finally able to call this the perfect vinyl for DJs.

Through hundreds of test presses, material challenges, global compliances, precession adjustments from the boiler room to the cast, our “Shokunin” ethics is translated straight onto our vinyl. From our time, energy, research and devotion, all can be experienced on the new MADE IN JAPAN, djay Neural Mix vinyl.

"It’s been a journey and we are honored and thankful to have the opportunity to release our newest vinyl with such great friends we have known since their humble beginnings. DJs be ready!!!
Chuck Ono
STOKYO"

FEATURES

● Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl
● Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth
● DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

LABEL PROTECTION FOR SINGLE RECORDS

Protective device for cleaning EP records with liquids.

Prevent your singles label from getting wet when cleaning the record. A single adapter is of course included in the scope of delivery. Handling is improved with the large handle.

• package contents: Protector case Rubber gasket x2 Rubber blade x2 Adapter for single shot x1
• weight of the case: approx. 137g
• packaging weight: approx. 220g
• pack size: 122x172x50m

Pro-Ject standard dust cover Type 1, suitable for chassis like Debut, 1, 1.2, Xpression.

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

With the large rollboard, the Record Box system has grown to include a practical solution for the mobile realization of individual hi-fi furniture ideas. The rollboard accommodates two large module boxes while maintaining mobility.

A combination of several rollboards allows the realization of roll containers, corner furniture, large couch and side tables as well as many other furniture ideas. On the sturdy rubber wheels, the resulting furniture can be moved freely in the room at any time.

As with all modules in the Record Box series, the Rollboard is connected to other boxes in the system by innovative adhesive points. As a record retailer, HHV offers Record Box vinyl lovers a high-quality, stable and affordable solution for the protected storage of record collections, technology, folders and much more.

Technical details:

• Provides space for max. circulation of 2 pcs. 12" Record Storage Boxes (110)
• Dimensions: approx. 72 x 36 x 4 cm
• Maximum load capacity: 80 kg
• Material: 15 mm MDF with melamine coating
• Available in white and black
• Connecting element: "Record Box" adhesive dots
• Rubber wheels and screws included
• Boxes for self-assembly - screwdriver required!

OEM Replacement Pitch Potentionmeter for Technics SL 1200 MkII

Easy install.

• Improved carbon element
• No zero 'detent click' for accuracy
• Super smooth
• 105mm travel
• Suitable for SFDZ122N11 or SFDZ122N11-1

Aluminium die-cast headshell, designed for AT-LP3.

Removable, universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Available in vivid red, it is suitable for 1/2" mount cartridges and 4-pin turntable arms.

Specifications:
• Angled shape suitable for AT-LP3’s straight tonearm
• Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms.
• Finger lift allows precise stylus placement
• Vivid red headshell design
• Includes lead wires and mounting screws

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.10 mm
• material: translucent polyethylene, 100µ
• selling unit: 200 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

There is space for around 40-50 records in this practical record stand, which invites you to browse. Thanks to its powder-coated metal construction, dimensions of 25 x 25 x 23 cm and clear design, the stand fits into any room and is also suitable for professional use.
We have developed Vinyl Care by HHV for passionate vinyl collectors. In addition to practical cleaning products for vinyl, we offer storage solutions and gift ideas under this label that will make every record lover's heart beat faster.

The black vinyl stand offers space for storing 40-50 records. It is made of powder-coated metal and is ideal for professional and home use. Measuring 25 x 25 x 23 cm and with its clear design, the stand is an ideal storage option for all records that you want to have to hand quickly.
Under the Vinyl Care by HHV label, we present high-quality care and storage solutions for vinyl collections. We stand for top quality at affordable prices and take feedback from our customers as an incentive to continuously develop our products.

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: white
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

As a new member of the HHV Record Box family we would like to introduce the special 12 inch vinyl frame made from MDF. The Record Box Vinyl Frame is not only of high quality but also a beautiful design element of a modern interior - and besides, it's the most stylish addition to the Record Box modular system. The Record Box Vinyl Frame MDF is a rugged construction with a plexiglass cover, which protects the artwork of the 12 inch and emphasizes the noble design.

Not to mention, our MDF frames always include a passe-partout made of high-quality cardboard to highlight the record's cover artwork. In addition, they are very easy to attach and plate, and the holder is adjustable.

Record Box - Vinyl Frame 12" Vinyl Frame MDF (triple pack) - features/specifications:

• color: black
• sturdy frame made of medium density fiberboard for 12 inch records with plexiglass cover
• outer dimensions: approx. 350 x 350 x 20 mm
• inner dimensions: 310 x 310 mm
• max. LP thickness: approx. 10 mm
• weight: 720 g (per frame)

The AIAIAI TMA-2 Cable C02 is a coiled cable with adaptor (SKU 01302). 4 mm/1.5 m.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

Frames for 7" vinyl singles

Expose, protect and enjoy your discs to the fullest 7 ”vinyl. The frames for singles of AMA integrate our system open system that allows you to change the cover with a simple gesture and listen to your little framed jewels.
Turn your walls into original interactive art galleries.

AMA's frames for singles are handcrafted, with 100% natural and ecological products.

The entire handmade process of cutting, painting and assembling is carried out in the AMA-workshop, located in Lleida (Spain).

All AMA macros include:
• Instructions and template to hang the frame.
• Screws + dowels.
• Kraft cardboard packaging.

Technical information:
• Hand-made.
• Materials: Solid ayous wood, glass and cardboard.
• Available colors: White / Black (ecological paints).
• External measurements: 244 mm x 244 mm. (Width 35 mm)
• Single visual area: 173 mm x 173 mm.

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

Model AT-VM95C
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95C
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Spirit level

Spirit level for optimum positioning of a turntable.

The OM cartridge for headshell mounting comes with superb sound characteristics and a very sturdy construction that also lends itself to scratching.

FEATURES
•Headshell mounting
•Spherical stylus
•Low vinyl wearout
•Excellent sound characteristics
•Appropriate for scratching
•Sturdy construction

TECHNICAL DATA
•Frequency range: 20 Hz - 22 kHz
•Output voltage (5 cm/s): 4 mV
•Tracking force range: 1,75 - 2,25 g
•Recommended tracking force: 2 g
•Weight: 5 g

•Excellent for scratching
•Very high tracking ability
•Very low vinyl wearout

The Concorde Blue cartridge system is particularly suitable for scratching, due to the special spherical stylus. With a very high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
•Excellent for scratching
•Special spherical stylus
•Very high tracking ability
•High output voltage
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 6 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

AT617A - CARTRIDGE STYLUS CLEANER
- Specially formulated polyurethane gel removes dirt particles from stylus
- Gel remains tacky for years
- Surface is washable for repeated use

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

STYLOPHONE S1
THE ORIGINAL POCKET SYNTHESIZER
The unique sound of the Stylophone has been used by everyone from Bowie to the White Stripes.

The latest Stylophone features the same iconic, analog sound as the original, first released in 1968.

The Stylophone is easy to play, keyboard operated and you can take it anywhere!

EASY TO PLAY
Play by tapping and sliding the connected stylus along the touch-sensitive metal surface. Each segment on the surface plays a different note. It’s easy to play, perfect for beginners and experienced musicians!

PORTABLE & BATTERY-POWERED
At less than 12cm wide, the Stylophone will fit right in your coat pocket. It runs on 3 x AA batteries, and features a built-in speaker and headphone socket – so you can play it everywhere you go.

CONNECT TO YOUR OTHER GEAR
Connect the Stylophone to your computer and other gear to enhance your sound possibilities! Use a 3.5mm Stereo cable to connect into the line input on your PC, and use your preferred software to record and manipulate your Stylophone sounds.

Video: https://youtu.be/qJ1D35aYiv0

The Reloop Laptop Stand LTD. is the enhanced assistant for the installation of laptops or other hardware in a DJ setup. Thanks to the variable width notebooks of all sizes can be set up safely and space savingly.

FEATURES
• Robust and firm laptop stand for digital DJs, musicians and producers
• For all current laptop sizes up to 17''
• Anti-slipping and vibration protection due to especially broad cushion overlays
• 3 different widths due to removable adapter parts
• Mountable on consoles, tables or as stand-alone

TECHNICAL DATA
• Widths: 335 mm, 310 mm or 285 mm
• Weight: 2.30 kg
• Supply without decoration
• Incl. 2 screw clamps and 2 stand rails

A Digital DJ looking for a professional, durable case solution for your Universal Audio Apollo Twin / MKII controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio Apollo Twin / MKII controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Weight 0,47 kg / 1.034 lbs
Outer Dimensions cm: 16 x 15.8 x 6.8 | inch: 6.29 x 6.22 x 2.6
Inner Dimensions Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Universal Audio Apollo Twin
Universal Audio Apollo Twin MKII

Features:

• Durashock molded EVA foam
• Fits Universal Audio Apollo Twin MK2 controller
• Heavy duty handle
• Easy grip zipper pulls

A creative performer looking for a professional, durable
case solution for the Wolfmix W1? Then look no further,
UDG developed a super light EVA Hardcase designed for
life on the road. Constructed from durable lightweight
compression moulded EVA material with a laminated
nylon exterior this case provides protection against drops,
scratches & liquids. Skilfully designed & moulded to fit the
Wolfmix W1, this case is perfect for the travelling creative
performers that needs to protect their equipment.
FEATURES
• Fits Wolfmix W1
• Cover main material 600D polyester with 5 mm EVA durashock
molded body
• Mesh compartment for power adapter, extra cables
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER
INNER
DIMENSION WIDTH HEIGHT DEPTH
WEIGHT
22.9 25.4 11.7
0.5 kg 1.1 lbs
9.0 10.0 4.6
CM
INCH
19.9 22.4 6.2
7.8 8.8 2.4
CM
INCH

A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio Arrow/ Apollo Solo? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Arrow/ Apollo Solo, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

• Weight: 0,57 kg / 1.254 lbs
• EAN: 8718969211673
• Outer Dimensions (W x H x D): 22 x 16.6 x 6.9 cm | 8.7 x 6.5 x 2.7 inch
• Inner Dimensions (W x H x D): 18 x 12.6 x 5.9 cm | 7.1 x 4.9 x 2.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Universal Audio Arrow / Apollo Solo

Machined aluminium housing turntable leveler that provides a precise level for horizontal adjustment of the turntable.

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

A producer/ musician looking for a professional, durable case solution for your Universal Audio Apollo X4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Apollo X4, these cases are perfect for the travelling producer/ musician that needs to protect their equipment.

SPECIFICATION
Specification
Weight 0,77 kg / 1.694 lbs

Outer Dimensions (W x H x D) 27.8 x 20.2 x 7.6 cm | 10.9 x 7.9 x 2.9 inch
Inner Dimensions (W x H x D) 23.8 x 16.2 x 6.6 cm | 9.4 x 6.4 x 2.6 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Heavy-duty handle
Convenient carry handle
Easy grip zipper puller
Fits Universal Audio Apollo X4

A Digital DJ looking for a professional case solution for your NI F1/X1/Z1 controller? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI-Kontrol F1/X1/Z1 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the F1/X1/Z1 controller, the Case is perfect for travelling DJ's that need to protect their equipment.

Weight 0,42 kg / 0.9284 lbs
EAN 8717228276934
Color Black
Outer Dimensions (W x H x D) cm: 33 x 16 x 6 | inch: 13 x 6.2 x 2.4
Inner Dimensions (W x H x D) Not Applicable
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Fits NI Traktor Kontrol F1
NI Traktor Kontrol X1
NI Traktor Kontrol Z1

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

The Serato 10" Serato Control Vinyl includes two pieces of ten inch Serato Control discs that offer much more control than a seven inch dic. The Serato 10" Serato Series includes remastered Serato NoiseMap Control Tone on side A and B - now, the signal is 6dB louder than before which leads into more precise tracking and a better vinyl feel.

• includes 2 10" Serato Control Vinyl discs
• Control Vinyl for Serato DJ Pro Software
• A side features 8 minutes, flip side 10 minuntes Control Tone
• Serato NoiseMap Control Signal has been remastered, now it's 6dB louder compared to Control Vinyl discs
"Vinyl Select" function allows to navigate the library's mp3 files
• continuous Control Vinyl signal allows precise scratching and mixing
• innovative positioning technology for faster and more precise positioning of the needle
• Control Vinyl features visible timestamps divided into minutes
• every record pressed is a high quality product and will perform flawlessly

ATN95EX
REPLACEMENT STYLUS FOR AT95EX
Elliptical diamond stylus with Bonded Round Shank
Replacement stylus for AT95EX
Available in red

How to minimize the risk of ring wear of your gateold covers? Just put your vinyl goodies respectively the record sleeves in these transparent outer sleeves to keep your collection in good shape.

Record Outer Sleeve 12" Vinyl Doppel LP Gatefold Schutzhüllen - specific details:

• dimensions: 316 x 640 x 0.1 mm
• material: translucent CPP
• selling unit: 50 pieces

Made in Japan, STOKYO turntable replacement headshell

Official STOKYO headshell same type as you will find on Technics SL-1200
High Quality finish (Matte)
Lead wires (Shielded)

A music producer/ sound engineer looking for a professional, durable case solution for your Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante, this case is perfect for the travelling A music producer/ sound engineer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Removable divider for extra cables or power adapter
• Heavy duty handle
• Easy grip zipper pulls

Fits:
• Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante

Specifications:
• Weight: 0,40 kg / 0.88 lbs
• Outer Dimensions (W x H x D): 23.8 x 14.9 x 8.5 cm | 9.4 x 5.9 x 3.3 inch
• Inner Dimensions (W x H x D): 22.8 x 13.9 x 7.5 cm | 8.9 x 5.5 x 2.9 inch
• Material: Durashock molded EVA foam

comfortable, solid, universal shoulder pad for
heavy bags and long journeys
a heavy velcro closure makes the pad attachable
to any of our bags with 50mm wide straps.

especially developed for our chateau vinyl record bag range

material: certified cordura nylon

handmade in germany

pictures: airbagcraftworks.com