DJ Equipment 686 Items

Smooth vinyl precision.

ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.

SPECIFICATIONS

Turntable Section
• Drive System: Belt drive
• Motor: DC motor
• Selectable Speeds: 33⅓ and 45 rpm
• Motor Servo: Speed rotation and servo system
• Rotation Speed Variation: +/-1%
• Wow and Flutter: 1%
• Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)
• Platter: Aluminum die-cast
• Platter Diameter: 0 in / 300 mm

Tonearm Section
• Type: Aluminum tube, static-balanced
• Effective Arm Length: 8 in / 223.6 mm
• Stylus Pressure Range: 0 to 0 g
• Cartridge Weight Range: 5 to 6.0 g
• Effective Arm Mass: 4 g
• Overhang: 6 mm
• Offset Angle: 25 degrees
• Anti-Skating: Adjustment Supported
• Main Bearing: Stainless steel

Cartridge Section:
• Type: Audio-Technica AT91 moving magnet
• Stylus Construction: Bonded diamond
• Mount: Half-inch
• Frequency Response: 20 Hz to 20 kHz
• Channel Separation: >18 dB
• Channel Balance: 5 dB
• Vertical Tracking: Angle 20 degrees
• Stylus Pressure: 0 g +/-0.5 g
• Cartridge Weight: 0 g +/-0.5 g
• Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier
• Type :Moving magnet (MM)
• Phono Output: 5 mV (1 kHz, 3.54 cm/sec)
• Line Output: 140 mV (-17 dBV)
• Phono/Line: Switchable
• Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories
Voltage: 100 to 240 V AC / 50 to 60 Hz
Power Consumption: 1.5 W (less than 0.5 W at standby)
Dimensions: (WXHXD) 5.5 x 16.05 x 14.20
Weight: 12.10 lb

Tech Sheet: https://elac-content.s3.amazonaws.com/uploads/2018/08/Miracord-50-Turntable_8-8-18.pdf

Stylus for Goldring E3 MM Cartridge

Just needle, not the complete cartridge included!

Stylus for Goldring E2 MM Cartridge

Stylus for Goldring E1 MM Cartridge

Goldring E3

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Violet
• Cantilever: Aluminium
• Stylus profile: Elliptical
• Stylus radius: 0.3 x 0.7 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

The UDG 7” SlingBag 60 is a small size bag that holds approximately 60 pieces of 7 inch records. It's equipped with a small pocket at the front and an interior mesh pocket for small accessories. In addition, the UDG Ultimate 7" SlingBag 60 features the special soft fleeced lining which provides protection from bumps and knocks. The UDG Ultimate 7" SlingBag 60 comes with a handgrip, detachable and adjustable shoulder strap. This UDG item is the one bag a DJ need to carry around 7-inch records - a perfect-sized bag for a minimalist DJ set!

UDG Ultimate 7" SlingBag 60 - Features/Specs:

• Soft fleeced interior provides protection from bumps and knocks
• Interior mesh pocket for USB drives, SD cards and small accessories
• Small front pocket for smaller gears
• Adjustable shoulder strap
• Convenient carry handles
• Holds up to 60 x 7” records
• Weight: 0.35 kg / 0.77 lbs
• Outer Dimensions (W x H x D) cm: 21 x 21 x 16.5 | inch: 8.3 x 8.3 x 6.5
• Inner Dimensions (W x H x D) cm: 20.5 x 19 x 15 | inch: 8.1 x 7.5 x 5.9
• Material: Water resistant Ballistic Nylon 1680D

A Digital DJ looking for a professional, durable case solution for your Pioneer XDJ-700 / Numark PT01 Scratch Turntable USB? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer XDJ-700 / Numark PT01 Scratch Turntable USB, these cases are perfect for the travelling DJ that needs to protect their equipment.

EAN 8718969211192
Color Black
Weight 1,72 kg / 3.784 lbs
Outer Dimensions (W x H x D) 33 x 32 x 14 cm | 13 x 12.6 x 5.5 inch
Inner Dimensions (W x H x D) 32 x 31.5 x 13 cm | 12.6 x 12.4 x 5.1 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Protective egg-crate foam prevent damage from vibrations and shocks
Extra's Removable divider for cable and power adapter storage
Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Pioneer XDJ-700
Numark PT01 Scratch Turntable USB

After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Oiled Oak Finish Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

The new MAGMA 45 RECORD-BAG 50 holds up to 50 x 7-inch records and is perfect for shorter DJ-sets or record digging. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records.

FITS:
• 50 x 7” Vinyl-Singles
• 45 Adapters

BASICS:

• Constructed of water-resistant 1680D Polyester
• 1 thick cm EVA padding and integrated PVC walls for ultimate protection
• Strong zipper
• Internal mesh pocket for 45 adapter storage
• Convenient carrying-handle and ergonomic shoulder-strap
• Fits inside most backpacks

SPECS:

• Outer measures: 21 x 21 x 12,5 cm
• Inner measures: 18,5 x 18,5 x 11 cm
• Weight: 0,7 kg

45 Adapter not included.