DJ Equipment 1887 Items

The Super OM 5E major improvements:
1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion.

2. OM Super cartridges models have split pole PINs which reduces magnetic losses at the treble end. This technology extends the frequency range and improves phase linearity.

3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances.

Optimal fit and sound reproduction
If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.

If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.

Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion.

Super OM 5 Technical data:
• Output voltage at 1000 Hz, 5cm/sec. - 4 mV
• Channel balance at 1 kHz - 1.5 dB
• Channel separation at 1 kHz - 22 dB
• Channel separation at 15 kHz - 15 dB
• Frequency response - 20-20.000 Hz + 3 / -3
• Tracking ability at 315Hz at recommended tracking force - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Internal impedance, DC resistance - 1 kOhm
• Internal inductance - 580 mH
• Recommended load resistance - 47 kOhm
• Recommended load capacitance - 200-500 pF
• Cartridge colour, body/stylus - Black/Black
• Cartridge weight incl. extra weight - 5 g
• Cartridge weight excl. extra weight - 2.5 g
• Replacement stylus unit - Stylus 5 E, Stylus 10

Styli types and interchangeability
The OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond.

In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus.

Depending on your preference, styli for the OM 5 Series are easily interchanged and include: styli 3E, 5E, 10, 20, 30, 40 & 78 and D 25 M.

The new Ortofon OM 5 series encompasses three basic cartridges: OM 5S, OM 5E and Super OM 5E.
• The series is the lowest-mass range of moving magnet cartridges offered by Ortofon.
• The OM cartridges bodies have been designed to provide easy mounting and alignment on both top mount and bottom mount headshells.
• The OM 5 Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm

45 RECOD-BAG 100

The new MAGMA 45 RECORD-BAG 100 is the latest addition to MAGMA’s 45 bag range and perfectly holds up to 100 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. Additional accessories such as headphones, a needle-case and 45-adapters can be stored in the two zippered side-pockets.

FITS:

• 100 x 7” Vinyl-Singles
• 45 Adapters & accessories

BASICS:

• Heavy duty and 100% waterproof 1680D Ballistic-Nylon
• Integrated PVC walls for ultimate protection and stable fit
• Two side pockets fits headphones, needle-case and 45-adapters
• Internal zippered mesh-compartment
• Detachable shoulder-strap

SPECS:

• Outer measures: 29 x 20 x 21 cm (incl. side pockets)
• Inner measures: 19,5 x 18 x 19 cm
• Weight: 0,9 kg

45 Adapter not included.

factory – melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

multiple real synthesizer engines, including fm, subtractive synthesis, wave table and physical modeled string.
16 punch-in effects including delay, bit crusher and filters.
16 punch-in arpeggio and chord play styles
parameter locks.
auto compressor
hardware limiter
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-14/en

With the set of roll container, register and storage boxes, Record Box is making an attractive offer for passionate vinyl collectors: Buying a set represents a price advantage compared to buying the components individually and offers an uncomplicated and individual solution for the mobile storage of records and more.
When developing the Record Box furniture system, the specific needs of vinyl collectors were directly taken into account. In this way, the storage box and the register box can be easily attached to the rollboard and added to a piece of furniture that is as practical as it is attractive. The register box is the top end and invites you to leaf through the records stored in it.
The three modular pieces are connected using specially developed glue dots that can be easily removed at any time. In the blink of an eye you can create a side table, a roll container, coffee table or record shelf that can be moved freely around the room.
The furniture is made of high quality MDF with a robust melamine coating and offers an attractive price-performance ratio.
The set is available in black and white, offering space for around 200 records and, like the other modules of the Record Box furniture system, is used to implement creative and individual solutions for vinyl storage and presentation.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x78cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x 12-inch 100 register box
• 1x connecting elements glue dots from »Record Box«
• Assembly instructions
• Material: 15 mm MDF with melamine coating - white or black
• Boxes for self-assembly - screwdriver required!

Despite the tight tolerances of the hole in the center of the vinyl,

(0.286'' +0.001'' / -0.002''),

it sometimes happens that the hole is less than 0.284'' min.

In solution to this problem, we offer you our reamer

STABLE 33.33

Completely redesigned to allow you better control when correcting the diameter in the center of your vinyl, this small tool is very

simple to use.

You can now easily correct this small deviation of the diameter in the center of your vinyls which were too tight to put on your turntable.

Video: https://youtu.be/b8l5BRlgSHM

With the set of roll container, register and storage boxes, Record Box is making an attractive offer for passionate vinyl collectors: Buying a set represents a price advantage compared to buying the components individually and offers an uncomplicated and individual solution for the mobile storage of records and more.
When developing the Record Box furniture system, the specific needs of vinyl collectors were directly taken into account. In this way, the storage box and the register box can be easily attached to the rollboard and added to a piece of furniture that is as practical as it is attractive. The register box is the top end and invites you to leaf through the records stored in it.
The three modular pieces are connected using specially developed glue dots that can be easily removed at any time. In the blink of an eye you can create a side table, a roll container, coffee table or record shelf that can be moved freely around the room.
The furniture is made of high quality MDF with a robust melamine coating and offers an attractive price-performance ratio.
The set is available in black and white, offering space for around 200 records and, like the other modules of the Record Box furniture system, is used to implement creative and individual solutions for vinyl storage and presentation.

Technical details & components of the set:
• Total dimensions of the furniture: approx. 36x36x78cm (LxDxH)
• 1x rollboard
• 1x 12-inch 110 storage box
• 1x 12-inch 100 register box
• 1x connecting elements glue dots from »Record Box«
• Assembly instructions
• Material: 15 mm MDF with melamine coating - white or black
• Boxes for self-assembly - screwdriver required!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

18g TechniHard™ adjustable headshell with AT6101 quad wire.

A 18g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

15g TechniHard™ adjustable headshell with AT6101 quad wire.

A 15g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH15/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

Open-back headphones with self-adjusting headband support mechanism - suitable for hours of use with home audio and video systems. Offers full, high-quality sound.

Features:
• Open-air design, featuring 40mm CCAW drivers, delivers rich, detailed sound
• Honeycomb-punched aluminium housings enable clear sound reproduction
• Self-adjusting headband support provides comfortable fit even during extended wear
• Soft, cloth earpads reduce pressure on your ears

Specifications:
• Driver Diameter: Open-back dynamic 40mm
• Frequency Response: 18 - 25,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 93 dB/mW
• Impedance: 35 ohms
• Weight: 240g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Closed-back dynamic headphones
High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.

Features:
• Large 53 mm CCAW bobbin-wound voice coil drivers reproduce full, wide-range sound
• Anti-vibration aluminium housings ensure rich sound reproduction
• Self-adjusting headband support mechanism automatically delivers the best possible fit
• Bass-ports create tight, deep bass sound
• Soft foam earpads provide extra comfort while listening

Specifications:
• Driver Diameter: Closed-back dynamic 53mm
• Frequency Response: 10 - 25,000 Hz
• Maximum Input Power: 1,800mW
• Sensitivity: 106 dB/mW
• Impedance: 40 ohms
• Weight: 270g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

MM Phono Pre-amplifier

Good sound from sound technology
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)

Features
• Amplification and RIAA equalisation for MM cartridges
• Small size allows installation close to record player

107x36x104 (115)mm

Manual: http://www.project-audio.com/inhalt/en/manual/manual_phonoboxmm.pdf

The AIAIAI TMA-2 Headband H03 is made from H03 nylon (SKU 01203) and equipped with synthetic leather padding for high comfort.

AIAIAI proudly presents their new headphone project. With TMA-2 Modular, AIAIAI has created the next step for the 21st century headphone: a framework consisting of modular audio technology, which provides a vast range of options across sound, function, comfort, and design, resulting in a unique, personalized headphone. To AIAIAI, Modular means a framework of elements that can be connected or combined in different ways. TMA-2 Modular means opportunity; a segmental build solution based on the TMA-1 series that lets you decide on your headphone preferences while enabling quick and easy change or upgrade of parts along the way.

The Modularity will consist of 4 basic elements, which all shape the final performance of the headphone:

• headbands - choose between 3 different shapes and cushion types
• speaker units - choose between 4 different sound settings/drivers
• earpads - choose between 5 different cushion types and materials
• cables - choose between 6 cables w/wo microphone, material, length etc.

Important info: the sound configuration is determined by the speaker unit and the earpads, the combination of which have equal importance in shaping the overall sound of the headphone. A central part of the modular concept is that users are able to get a product more specifically suitable for their preferences and usage.

A Digital DJ looking for a professional, durable case solution for your Pioneer DDJ-FLX4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DDJ-FLX4, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES
Protection:
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Fits:
• Pioneer DDJ-FLX4 Controller

Specifications:
• Weight: 1,78 kg / 3.916 lbs
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 48.8 x 27.9 x 8.5 cm | 19.2 x 10.9 x 3.4 inch
• Material: Durashock molded EVA foam

Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• Ableton Push III
• Ableton Push I
• Ableton Push

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 43 x 37 x 10,5 cm
• Inner measures: 39 x 33 x 5 cm
• Weight: 1,3 kg

The CTRL MPC LIVE II is custom designed to a hold the Akai MPC LIVE II and is a very lightweight and convenient solution to carry your MPC well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:

• Akai MPC LIVE II
• Akai MPC Live
• Akai MPC Touch

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam padding to protect knobs, faders and pads
• Comfortable carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 44 x 29 x 13 cm
• Inner measures: 42 x 27 x 11 cm
• Weight: 1,26 kg
• Color: black/black (Item-No.: 48032 / EAN-Code: 4041212480323)

- NEW - Our proven product with improved functionality - NEW -

Practical care set for basic cleaning.
Permanently antistatic LPs, with Disco-Antistatic Mixture, a special liquid that automatically removes dust, debris and dried liquids without residue and deep into the groove.

The care set consists of:
* Wash case with inserted goat hair brushes and practical axle lock
* Housing with NEW - nonslip rubber feet - NEW
* NEW - Enlarged label sealing cup - NEW with rubber seal and hand crank for LPs/singles/10 "
* NEW - filling line "max." - NEW for marking the filling level of the cleaning fluid
* 1 liter cleaning fluid DISCO ANTISTAT Mixture
* Funnel with filter to refill the liquid into the bottle after use
* Drying stand with drip tray for 15 LPs / singles / 10 "(can be stowed in the housing after use)

Made in Germany!

•Allround cartridge system with many applications
•Balanced sound, slight accentuation of the bass range
•Can also be used for scratching

The Concorde Black boasts low vinyl wearout characteristics and a spherical stylus, while especially good sound characteristics emphasise its quality as a good all-rounder.

FEATURES
•Allround cartridge system with many applications
•Special spherical stylus
•Balanced sound, slight accentuation of the bass range
•Can also be used for scratching
•Low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 18 kHz
•Output voltage (5 cm/s): 5 mV
•Tracking force range: 3 - 5 g
•Recommended tracking force: 4 g
•Weight: 18.5 g

Nagaoka Headshell HSAL-01

This headshell has been designed with the utmost precision to give you an outstanding listening experience.

Design for maximum ease of use:
When placing the needle, the finger lift design provides an excellent view of the needle tip. The finger hook is easy to use and the angle can be easily held with your fingers. Every detail has been designed with the utmost care to ensure uncomplicated and pleasant use.

Ideal for NAGAOKA JT-80 Series and many other pickups:
This high-quality headshell was developed specifically for the NAGAOKA JT-80 series to ensure an optimal combination of precision and performance. Enjoy music in its purest form with this perfectly coordinated combination.

Of course, the Nagaoka HSAL-01 can also be combined with other pickups. The elongated holes allow the perfect positioning of your pickup and the included cables leave enough room for adjustment.

Easy installation:
The Nagaoka Headshell HSAL-01 comes with an installation guide to give you an effortless setup. The package contains all the necessary items including mounting screws to make the installation process easier for you.

Product specifications:
• Housing material: aluminum
• Pin: Gold plated
• Weight: 6.8g (approximate value, excluding mounting screws)
• Frequency response: 20Hz - 20kHz
• Box contents: headshell housing, lead wire, 2 × 12mm screws, 2 × 6mm screws, compatible nuts, washers.

Fresh out the Crispy Crust oven is "Hot & Fresh", our first vinyl collaboration with Crispy Crust Records.

"Hot & Fresh" features six tracks from the Crispy roster including Eskei83, Drunken Masters, Tropkillaz, Ben Esser & Donkong across a pair of crystal clear vinyl.

Packed into a customised pizza box, this isn't your average pressing. It also comes with a bunch of tricks like pizza slice sticker markers, a menu with track info, and pizza-embossed Butter Rug slipmats for a super slick scratching experience.

Get 'em while they're hot.

Tracklist:

Side A:
1. Wax Wreckaz - Heavyweight Sound (feat. Dynamite Mc & Singer Blue)
2. Eskei83 - Fire (feat. Bunji Garlin)
3. Eskei83 & Drunken Masters - Rave (feat. Gunjah)

Side B:
Serato Control Tone

Side C:
1. Drunken Masters & Tropkillaz - All Day
2. Ben Esser - Love you More (Rafik Remix)
3. Donkong - Burning

Side D:
Serato Control Tone

Vinyl is a strange old girl. The manufacturing process - one part sweat, one part maths and one part magic, is not an exact science. While every record pressed is a high quality product and will perform flawlessly, there can be some variation in the color throughout a run. Every record is unique.

ULTRA PORTABLE PHONO/LINE USB RECORDING INTERFACE
The description of the Reloop iPhono 2 could not be more appropriate:
"Digitize your vinyl tracks for playing with any current DJ software - quickly and easily."

VARIETY OF CONNECTION OPTIONS
The process of filing your irreplaceable vinyl collection just became a piece of cake. By plugging a turntable into the Reloop iPhono 2 USB audio interface, and then connecting this to a computer (PC or Mac), precious vinyl rarities can now be recorded digitally in crystal clear CD quality thanks to the high-quality digital drivers. It goes without saying that any other audio sources, such as tape decks or Minidisc players can also be connected to the interface for recording.

ENDLESS POSSIBILITIES
But there is more! Why not hook up a mixer to the Reloop iPhono 2 and record your entire DJ set to your computer? The mix can then be instantly uploaded to share with others online, or could just as easily be burnt to a CD for physical distribution - the possibilities are endless.

RECORD YOUR VINYL!
The Reloop iPhono 2 even comes with a full copy of PCDJ DJ LE software and a sample pack from Loop Masters.

FEATURES
• USB phono/line recording interface
• Finish and design in popular Play interface style
• 16 bit A/D converter
• PH/LN switch
• Digitize vinyl easily and quickly
• Inclusive PCDJ DJ LE
• Plug'n'Play system: no additional drivers necessary
• Headphones and RCA output for playback of recorded audio(soundcard) or monitoring through computer (software playthrough)
• Input gain dial
• Signal/clip LED
• Output LED
• Anti-theft: Kensington slot
• USB bus powered

TECHNICAL DATA
• Inputs: 1x phono/line (RCA)
• Ground GND screw
• Outputs: 1x PC (mini USB), 1x output (RCA), 1x headphones (6,3 mm jack)
• Dimensions: 130 x 49 x 115 mm
• Weight: 93 g
• Incl. USB cable, PCDJ DJ software (Reloop edition LE full version) and Loop Masters sample pack

Manual: https://www.reloop.com/media/catalog/product/pdf/2/2/4/224792_Reloop_IM.pdf

Phono preamplifier

Phono Box E: Pure vinyl listening pleasure at an absolute bargain price!

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.

Features:
• Amplification and RIAA equalisation for MM cartridges
• Design principle inspired by Dr. Sykora
• SMD circuitry
• Special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black casing

Technical Specifications:
• Input impedance: 47 kohms
• Input capacitance: 120 pF
• Gain: 40 dB
• Output voltage(typically): 500mV/ 1kHz at 5mV/1kHz
• Noise floor: 88 dB (A weighted)
• THD: <0,05%
• RIAA deviation: deviation max. 0.5 dB/ 20 Hz - 20 kHz
• Input: 1 pair RCA socket
• Output: 1 pair RCA socket
• Outboard power supply: 18 V/500 mA DC; 220 - 240 V, 50 Hz
• Standby power consumption: < 1 watt
• Power consumption: 20 mA DC
• Dimension W x H x D (D with sockets): 120 x 32 x 100 (106) mm
• Weight: 269 g without power supply

Nightclub E Replacement stylus
Nightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.

Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.

It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.

The special elliptical stylus guarantees sound with insignificant scratching.

Nightclub E Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommmende tracking force - 65 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

AT-LH13OCC
13G TECHNIHARD™ ADJUSTABLE HEADSHELL WITH AT6101 QUAD WIRE
Adjustable overhang and adjustable azimuth (tilt)
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
1 hexagon wrench (for overhanging and tilt adjustment)

A 13g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced detail, with excellent mid-range definition
Circumaural design contours around the ears for excellent sound isolation in loud environments

Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 22,000 Hz
Max Input Power: 1,300 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 47 ohms
Folding/collapsible: Yes
Weight: (Without cable) 7.8 oz (220 g)
Cable - Detachable: No
Cable: 3 m (9.84’) Straight cable, left-side exit
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch

Luxury leadwireset
LW-7N is the hybrid lead wire made of Ultra High Purity Copper wire of 7N and 6 N. The end of wire is fastened by Rhodium plated terminal.
As there is no foreign particle other than Copper 7N (99.99999 % purity) in the wire, music signal can be transmitted without any noise.

Technical data:
• High purity Cu wire 7NCu: 3 x φ 0.26mm
• High purity Cu wire 6NCu: 16 x φ0.10mm

Mounting instructions:
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell. Please remember correct orientation of the leads. Ortofon SH-4 headshell and Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is normally only 1.0 mm.

Using LW 7N with the SH-4 headshell requies the LW 7N shell side clamp to be widened a little bit to fit on the SH-4 PINs. If shifted around, it may cause over-tightening of the assembly. Being aware about this detail, you will avoid the risk of having the cartridge's terminal PINs fall out.

The LH-2000 is a basic high quality headshell designed specifically for HiFi applications. Providing a clean, minimalist aesthetic, the LH-2000 is great for a wide variety of cartridges, e.g. the 2M Series .

Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please scroll to the bottom of the page to see the headshells mounting dimensions chart.

The LH-2000 comes with leadwires for easy and convenient connection
All Ortofon cartridges have a colour coding of the terminals, indicating red and green for right channel respectively hot and ground terminal. White and blue for left channel respectively hot and ground terminal. Green terminal will always be used for grounding the cartridge housings or motor-system, whenever connected inside the cartridge.

We recommend to connect lead wires to the cartridge and headshell before mounting the cartridge on the headshell.

Please remember correct orientation of the leads. Ortofon cartridges' terminal PINs diameter is 1.2 mm, whilst Ortofon headshells' PINs diameter is only 1.0 mm.

Features and Technical data:
• Universal mount
• Solid aluminum build
• Weight without screws - 15.5 grams
• Mounting distance - min 35.3 mm, max 43.4 mm
• Headshell length - 50.3 mm
• Headshell width - 20.0 mm

Technical specifications:
• Frequency response: - 20-20.000 Hz + 2 / - 2 dB
• Tracking ability at 315Hz at recommended tracking force*): 70 µm
• Compliance, dynamic, lateral: 25 µm/mN
• Stylus type: Elliptical
• Stylus tip radius: r/R 8/18 µm
• Tracking force range: 1.0-1.5 g (10-15 mN)
• Tracking force, recommended: 1.25 g (12.5 mN)
• Tracking angle: 20°
• Stylus colour: Black
• Recommended for TM 14U
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 70 µm
• Compliance, dynamic, lateral - 7 µm/mN
• Stylus type - Spherical
• Stylus tip radius - R 25µm
• Tracking force range - 2.0-3.0 g (20-30 mN)
• Tracking force, recommended - 2.5 g (25 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMP, TM, Concorde cartridges for playing micro-groove records.
*) Typical value

Technical specifications:
• Frequency response - 20-12.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 15 µm/mN
• Stylus type - Spherical
• Stylus tip radius - 65µm
• Tracking force range - 1.75-2.25 g (17.5-22.5 mN)
• Tracking force, recommended - 2.0 g (20 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for following cartridges: all Super OM, OM, OMB, OMP, TM, Concorde STD cartridges for playing 78 r.p.m. records
*) Typical value

Technical specifications:
• Frequency response - 20-18.000 Hz + 2 / - 3 dB
• Tracking ability at 315Hz at recommended tracking force *) - 60 µm
• Compliance, dynamic, lateral - 20 µm/mN
• Stylus type - Elliptical
• Stylus tip radius - r/R 8/18 µm
• Tracking force range - 1.5-2.0 g (15-20 mN)
• Tracking force, recommended - 1.75 g (17.5 mN)
• Tracking angle - 20°
• Stylus colour - Black
• Recommended for OM 3E, OMP 3E, OMB 3E
*) Typical value

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

Introducing the CTRL CASE APC 64 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Akai APC 64 it is a very lightweight and convenient solution to carry the instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• AKAI APC 64

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 41 x 32 x 10 cm
• Inner measures: 37,5 x 28,5 x 9 cm
• Weight: 1,1 kg

FEATURES
•Closed DJ headphones with high-performance 50-mm drivers
•Powerful sound optimized for DJs
•Sturdy construction for professional use
•Smart retractable construction for compact and safe transport
•Rotatable ear cups for flexible handling while DJing
•Comfortable and resistant head bracket with padding
•High-quality aluminium inlays with Reloop logo
•Comfortable ear pads for long DJ sessions
•Removable audio cable
•One-sided cable routing
•Gold-plated connections, incl. 6.3-mm adapter

TECHNICAL DATA
•Frequency range: 10 Hz - 20 kHz
•Impedance: 42 Ohm
•Acoustic pressure: 100 dB
•Maximum input: 2000 mW
•Connections: 3.5/6.3 mm jacks
•Weight: 310 g
•Incl. large carrying bag for headphones and accessories, cables, adapters

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg