DJ Equipment 762 Items

DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - DJ S

The Reloop Case, capable of holding approximately 60 records, is the perfect solution for small gigs. Two locks secure the bag against unauthorised access, the protective padding avoids unwanted damage to the vinyl.

FEATURES
• Classic record case
• Extremely robust construction made of aluminum-coated wood
• Removable top
• 2 lockable snap fits
• Foam padding
• Comfortable handle
• Rotund angles

TECHNICAL DATA
• Dimensions: 360 x 220 x 395 mm
• Weight: 2.6 kg
• Holds approximately 60 records

ATH-SQ1TW

Enjoy music, movies, games, and more with truly wireless audio. Designed for all multimedia needs, the ATH-SQ1TW colorful earbuds are easy to use, comfortable, and convenient. From the flexible dual or single earbud usability, to the hear-through functionality, the ATH-SQ1TW true wireless earbuds are not only stylish, but suitable for every lifestyle.

The ATH-SQ1TW earbuds are compatible with Bluetooth® 5.0 technology, delivering high- quality audio in a compact, lightweight design. As one of the most comfortable earbuds for small ears, the sleek design is easy on various ear shapes. The compact body is unobtrusive while also preventing the TWS earbuds from coming loose or falling out.

For quick usability, the earbuds automatically power on when removed from the included charging case. In one touch, users can Fast Pair for user-friendly connection with Android devices. Touch sensor controls on both sides respond to user commands, such as playing or pausing music, skipping between tracks, answering hands-free calls, and adjusting the volume without having to use a smartphone.

Equipped with exclusive 5.8 mm drivers, users can easily receive clear and powerful sound from any source, and experience minimal sound delay with these low latency wireless earbuds. The ATH-SQ1TW offers up to approximately 6.5 hours of continuous use on a full charge, or 19.5 hours with both the earbuds and charging case fully charged. Charging for just approximately 15 minutes provides about 60 minutes of continuous playback.

With the hear-through function, the built-in microphone captures ambient sounds to ensure users remain aware of their surroundings, even while listening to music or making calls.

The ATH-SQ1TW wireless earbuds have feature a splashproof design, protecting the earbuds from dripping water, such as rain and sweat. Not only are the ATH-SQ1TW earbuds compatible with the latest Bluetooth® 5.0 technology, but they also feature a multipairing function (for registering multiple devices) and voice guidance functionality.

Choose from a range of colored wireless earbuds, from classic shades to unique combinations. Available in licorice/black (ATH-SQ1TWBK), popcorn white (ATH-SQ1TWWH), blueberry (ATH-SQ1TWBL), caramel (ATH-SQ1TWMU), popsicle red/navy (ATH-SQ1TWNRD), and cupcake pink/ brown (ATH-SQ1TWPBW).

Included Accessories: The ATH-SQ1TW comes with a charging case, charging cable, and four pairs of eartips for earbuds.

Features:
• Superior audio from an exclusive 5.8 mm driver in a small square design
• 6.5 hours of continuous playback with up to 19.5 hours* of extended use
• Touch sensor control allow users to play or pause music, skip between tracks, answer calls, and adjust the volume
• Enjoy minimal sound delay while watching videos or playing games with low latency mode
• Hear-through function that lets in ambient sounds
• Supports Fast Pair for convenient connection with Android devices
• Flexible dual or single-ear usability
• Automatic power-on when removed from the case
• Rain and Water Splashproof Design (IPX4**-equivalent)
• Six color variations available, from classic shades to unique combinations
** IPX4 equivalent means that there is no harmful effect even if water is splashed from all directions. It cannot be used in hot and humid places such as baths. It is not completely waterproof.

Specifications:
Headphones
• Type Dynamic
• Driver Diameter 5.8 mm
• Frequency Response 20 - 20,000 Hz
• Sensitivity 100 dB/mW
• Impedance 16 ohms
• Battery Headphones: DC 3.7V lithium-ion battery; Charging case: DC 3.7V lithium-ion battery
• Battery Life Headphones: Max. approx. 6.5 hours*; Charging case: Max approx. 13.5 hours*
• Weight Headphones: Approx. 5.2 g (0.18 oz) (L), approx. 5.2 g (0.18 oz) (R); Charging case: Approx. 34.2g (1.2 oz)
• Charging Time Headphones: Approx. 1.5 hours*; Charging case: Approx. 2 hours*
• Operating Temperature 5°C to 40°C (41° F to 104°F)
• Microphone Type MEMS
• Microphone Sensitivity −38 dB (1V/Pa, at 1 kHz)
• Microphone Frequency Response 100-10,000 Hz
• Microphone Polar Pattern Omnidirectional
• Accessories Included 30 cm (12”) USB-A/USB-C charging cable, eartips (XS, S, M, L)
Notes *depending on operating conditions

Bluetooth®
• Bluetooth® Version Bluetooth version 5.0
• Operating Range Line of sight - approx. 10 m (33')
• Maximum RF Output 10 mW EIRP
• Frequency Band 2.402 GHz to 2.480 GHz
• Modulation Method FHSS
• Compatible Bluetooth Profiles A2DP, AVRCP, HFP, HSP
• Support Codec SBC
• Supported Content Protection Method SCMS-T
• Transmission Band 20-20,000 Hz

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model RCA-C;
• Interconnect cable, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model RCA-C: 41 cm

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs
GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

Compatible with cartridges - GT (discontinued and no longer available)

Made From Scratch replacement stylus
To support our customers who own the Concorde MFS we will continue to manufacture replacement stylus MFS.

Features:
- Spherical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Non-compromising energetic sound quality

Made From Scratch stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Made From Scratch (discontinued and no longer available)

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Ortofon Record stabilizer - Silver - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:

• Akai MPC One

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam padding to protect knobs, faders and pads
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 32 x 32 x 13,5 cm
• Inner measures: 28 x 28 x 10 cm
• Weight: 0,8 kg
• Color: black/red (Item-No.: 48031 / EAN-Code: 4041212480316)

Trendy headphone for iPod & Co

super loud, super lightweight & super cool

A cool headphone for the best possible sound reproduction of portable players, like iPod & Co. Hear it Two offers far better audio quality with higher sound pressure levels and superior looks, than many others. Soft and comfortable ear-cushions are swivel mountedmaking it easy to transport Hear it Two in a flat carry case. A high-quality signal-cable made from oxygen-free copper (HP-OFC) with bending protection and gold-plated jack-plug guarantees trouble free performance. Hear it headphones prove again, that outstanding quality does not need to be expensive.

Features:
• Super loud – super light – super cool
• more SPL with iPod & Co (107 dB)
• Lightweight design (77 g)
• adjustable ear-cushion position
• flat transport possible
• high wear comfort
• 3.5 mm jack plug

Technical Specifications:
• Transducer: 30 mm Neodymium driver (dynamic)
• Head-band: adjustable
• Frequency response: 18-22.000 Hz
• Cable material: HPOFC
• Cable length: 1.2 m
• Sensitivity: 107 dB @ 1mW
• Max. sound pressure level: 130 dB
• Impedance: 32 ohms
• Maximum input power: 50 mW
• Connector: 3.5 mm jack plug
• Weight (without cable): 77 g

AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf

Adapter for cleaning 10″ records with Degritter record cleaning machine.

Adapter for cleaning 7″ records with Degritter record cleaning machine.

REVOLUTIONARY NON-CONTACT TECHNOLOGY
The internationally lauded Innofader by Audio Innovate is now retro-fittable to all Reloop devices that are identified as „Innofader Compatible“.

MORE THAN 4 MILLION CYCLES: OPTIMIZED FOR THE HARDEST SCRATCHING APPLICATIONS
The RMX Innofader has been specially developed to give users an effortless, professional performance even under the most rigorous use in the toughest conditions. Audio Innovate‘s revolutionary non-contact technology has created a fader that is perfect for the needs of professional DJs. The RMX Innofaders are accurately calibrated and ready for immediate use in any compatible Reloop product; however, the performance can also be personalised with the added ability to fine-tune the Cut-in and Cut-out points.

EASY AND QUICK MOUNTING
The RMX Innofader represents the utmost quality throughout its design. The fader shaft is grounded to protect the integrity of the audio signal, and the design is tested to work for 4 million movement cycles – ensuring a long and reliable lifespan. The Reloop RMX Innofader is quick and easy to install on the professional RMX-22i/33i/60/80 and RMX-90 DVS mixers. Inside the box, a blue performance fader cap is included to complete the package.

FEATURES
• Revolutionary non-contact fader (mini Innofader by Audio Innovate)
• Designed to last more than 4 million cycles
• Quick mounting
• Cut-in and cut-out points can be calibrated
• Buttery smooth operating tension for perfect scratching
• Factory pre-calibrated for tight cut points
• 3-pin adapter cable for Reloop mixers included
• Fader shaft with brush grounding for even more reliable applications
• Compatible with Reloop RMX-22i/33i/44 BT/60/80/90 and all future Reloop products with INNOFADER compatible logo
• Incl. blue fader cap

TECHNICAL DATA
• Dimensions: 72 x 14.5 x 17 mm
• Weight: 26 g

Manual:
https://www.reloop.com/media/custom/upload/Reloop-Calibration_PDF_RMX_innofader_Web.pdf
https://www.reloop.com/media/catalog/product/pdf/2/3/4/234052_Reloop_IM.pdf

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Polyend Tracker, Tracker+, Play, or Play+
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your NI Maschine Mikro MK3
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand
• Fits Elektron Analog Heat, Analog Heat MKII, Analog Heat +FX, Digitakt, Digitakt II, Digitone, Syntakt
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

The 12" Record Case offers space for up to 100 12" records, which you can optimally transport and safely archive in this record case. The lid of the DJ record case is removable and can be used as a sorting pad during DJ'ing.

The butterfly lock protects your collection from theft. Despite its very sturdy design with parts made of aluminium, plastic-coated MDF panels and rivets, the Vinyl Record Case is pleasantly light to carry. The sturdy case handle rests on top.

Since the DJ case is covered with a foam layer on the inside, records are optimally protected against impacts. Deformations due to heat and fading due to sunlight are also reliably prevented when archiving collections in the record case.

Technical details:

• Capacity: maximum 100 12" records
• Material: aluminium, plastic-coated MDF panels
• Protective metal corners safeguard against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Removable lid and butterfly lock
• Dimensions (LxWxH): 36*36*36 cm
• Weight 4,25 kg

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin Titanium with white HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

Ortofon Record Stabilizer Heavy - Black - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

DJ On-Ear Headphones

My Style, My Cue
Start your DJ journey with HDJ-CUE1 headphones. These styled DJ headphones are built on DNA from our pro models but are available at a much more modest price.

While these entry-level cans are our most affordable pair yet, they match many of the feature and quality benchmarks set by our professional headphones range. Choose the HDJ-CUE1 for a pro look and feel, rich sound, compact and flexible design, and high-quality finish. Enjoy specialist sound tuning inherited from the pro-level HDJ-X5; perfectly hear low frequencies in the bass and kick drums so you can mix precisely and know exactly what your friends will hear when you drop the next track.

KEY FEATURES

High-quality sound
Hear the full richness of your music when DJing or just listening to a favorite track. Dynamic drivers enable you to feel the bass and hear mids and high-end sounds with crystal clarity, helping you to mix with pin-point precision.

Built to last
Each HDJ-CUE1 model can handle the heavy stress that DJing places on headphones. All moving parts have passed our strict-in house durability tests and extra-strong metal sliders in the headband bring added reliability.

Comfortable pro-style design
With ear cups that turn a full 90 degrees and a flexible, cushioned headband, you can comfortably monitor your mix your way. Listen with one ear while the other cup rests on the back of your head, or while your headphones are draped around your neck.

Customizable look
Personalize your look and express yourself by switching out the cable and earpads for one of 5 brightly colored replacements. Our separately sold HC-CP08 accessory pack is available in orange, yellow, green, blue, and pink.

Compact and portable
The lightweight, folding design means you can easily take your headphones wherever you go.

Detachable cables
A detachable 1.2m short-coiled cable is included, giving you freedom to move while performing, and its bayonet connector prevents accidental disconnections.

SPECIFICATIONS

Main Features:
• Type: Closed, dynamic
• Driver Units: 40 mm dome type
• Cord: 1.2 m short coiled cable (1.8 m extended length)
• Accessories: 1.2 m coiled cable (extended length 1.8 m), Instruction Manual

Specifications
• Impedance: 32 Ω
• Sensitivity: 104 dB
• Maximum Input Power: 2000 mW
• Weight (without cord): 215 g
• Frequency Range: 5 - 30000 Hz

The RHP-10 Mono is the latest member of the Reloop headphones family, and the first devoted to one-ear monitoring. The single ear-cup construction is designed for fast cueing of a track which, thanks to the large driver, is also possible when the ambient noise levels are high. The ergonomically designed padded handle and the water-resistant ear pad made of artificial leather are intended to withstand demanding live applications. The sturdy XLR cable connection and supplied spiral cable further emphasise the professional approach, allowing for a clutter-free and reliable performance. For fans of one-ear monitoring the RHP-10 Mono is a true and dependable partner.

FEATURES
• Professional one-ear construction with 50 mm neodymium driver
• Ergonomically padded handle
• Swivel-mounted ear cup
• Water-resistant ear pad made of artificial leather
• Flat comfort construction: compact and light ear cup housing
• Sturdy XLR connection
• Excellent, individually adjustable wearing comfort
• 90° angle adapter for optimised cable routing

TECHNICAL DATA
• Frequency range: 30 Hz – 30 kHz
• Impedance: 24 ohms
• Acoustic pressure: 109 dB
• THD: < 0,2% at 1 kHz, 1 mW
• Rated input power: 300 mW
• Weight: 246 g
• Incl. large artificial leather bag for headphones and accessories & cable

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)

Nightclub S Replacement Stylus
The Nighclub S stylus is amongst the top performers in its category, Scratch and Mix.

A spherical diamond and a customised design provide the basis for the cartridge's undeniable supremacy.

The stylus remains in the groove during the scratching and back-cueing, making it unfailingly reliable - even when giving a night-long performance.

Nightclub S Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-18.000 Hz +3 / - 2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

Introducing Concorde Music
Developed by music lovers, for music lovers, the Concorde Music cartridges blend premium performance with an iconic design.
Concorde Music, not just a cartridge, but a dedication to the profound impact music has on our lives, turning every listening session
into a captivating journey.

Possibly the world’s most iconic cartridge design
Building upon a rich legacy which began when we launched the original Concorde, the Concorde Music holds a storied history as
one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a
tonearm without screws or wires, the Concorde's unique design earned the Danish Industrial Design Award and became an icon in
the audio industry.

Features:
• Diamond: Each Concorde Music stylus features a diamond polished to the highest standards of the industry. Ranging from
a bonded Elliptical diamond on Concorde Music Red, to a Nude Shibata diamond on Concorde Music Black LVB 250.
• Cantilever: All Concorde Music models have a premium or high-end cantilever. The cantilever material is either aluminium
or boron for the best possible transmission of the vinyl record groove modulations picked up by the diamonds.
• Suspension: Exclusive Ortofon rubber compounds are used for the stylus suspensions, all carefully produced at the in_x0002_house own rubber production, and developed by the research and engineering team at Ortofon for brilliant performance.
• Coil system: Silver-pated oxygen free copper is chosen for the quad-coil system together with four Ortofon split pole pins
delivering a 6 mV output of dynamic, lifelike sound with an exceptional clarity and fidelity, capturing every detail.
• Upgradeability: All Concorde Music styli are compatible with all Concorde Music cartridges. An upgrade path is possible
through the entire series of Concorde Music cartridges, enabling upgrades from Concorde Music Red to Black LVB 250.
• Tool-free installation: Installing a Concorde Music cartridge on a turntable is easy and straightforward, no tools required
making it hassle free and convenient for all users.

It is all about the music
Concorde Music stands as an icon of design and musical dedication, inviting everyone to elevate their journey with the level of
accuracy in sound which has become characteristic for every Ortofon cartridge. Tailored for music lovers, incorporating a
straightforward installation, premium sound, and a timeless design. Concorde Music stands for a commitment to musicality.

Unique in-house rubber production a crucially important and vital part of a phono cartridge overall performance is the stylus
rubber suspension. Ortofon develops exclusive rubber compounds and produce the rubber suspensions and dampers in-house.

Ortofon quad-coil generating system with split pole pins in Concorde Music results in an exceptional channel balance and channel
separation, delivering a precise and dynamic sound image.

Ortofon, we love music!

Ortofon Record Stabilizer Heavy - Silver - 350 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Akai Pro MPC One+ and MPC One
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Ableton Push 3 and Push 2
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with the Decksaver® Push covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your NI Maschine MK3 or Maschine+
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Roland TR-8S
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

The new CTRL Case DDJ-SB2/RB a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-SB3, DDJ-400 or former models such as DDJ-SB2 or DDJ-RB controller. Made of lightweight and rigid Durashock molded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls. Whether you are driving or flying to your next gig, the MAGMA CTRL Case DDJ-SB2/RB will be by your side throughout the journey.

FITS:

• Pioneer DDJ-SB
• Pioneer DDJ-SB2
• Pioneer DDJ-SB3
• Pioneer DDJ-RB
• Pioneer DDJ-400

BASICS:

• Lightweight Durashock molded 5mm EVA foam and polyester exterior shell
• Sturdy zipper
• Including high density egg foam to protect control knobs, faders and jog wheels
• Comfortable carrying handles and detachable shoulder-strap
• Hand-luggage compatible
• Fits inside the MAGMA Rolltop III Backpack
• Compatible with Decksaver® covers

SPECS:

• Outer measures: 52 x 30 x 10 cm
• Inner measures: 49 x 28,5 x 7 cm
• Weight: 1,2 kg
• Color: black/red (Item-No.: 47998 / EAN-Code: 4041212479983)

Elevate your music production workflow with the Headliner Catalina Stand.

The Catalina series are modern production gear stands that raise your equipment to an ergonomic level, merging functionality with aesthetics seamlessly. With a minimalist design, they instantly become a key part of any desk setup, enhancing structure and organization.

Meticulously crafted, our stands offer a unique experience, making your production gear more enjoyable to use. They transform your device into a distinctive piece, providing an elegant look and fresh feel. Headliner Catalina Stands are compatible with Decksaver covers for optimal protection for your gear.

Each Catalina stand is made from genuine wood, treated with natural waxes and oils. Due to the distinct wood grain patterns, every stand is one of a kind.

The Headliner Catalina Stand is tailor-made for your music production desk.

Features:
• Genuine wood stand for your Akai Pro APC64
• Angled for comfort and ergonomics, providing a clean and organized workspace
• Every stand is one of a kind thanks to their unique wood grain patterns
• Nonslip rubber pads keep devices firmly in place
• Compatible with Decksaver® covers

The cassette player is back and coming to you in a 80s inspired and light weight design. You can take the CT102A anywhere because of the battery powered option. Connect your phone with the Bluetooth function and listen to all your favorite playlists. The built-in microphone gives you the ability to record a mixtape or message.

Key features:
• 1 full range speaker | 8 Ω 2W 3”
• Tape Deck
• AM/FM Radio
• Bluetooth
• Extendable Antenna
• Cassette Auto Stop
• Built-in Microphone
• Record to tape from the microphone, radio or Bluetooth
• EU & UK AC Power adapter or Battery Powered (4xC)

Dimensions: 24 cm (l), 8,5 cm (w), 11,5 cm (h)
Weight: 1 kg
Material: Plastic

STYLOPHONE GEN-X1
EXPAND YOUR MUSICAL HORIZONS
Packed with features, the Stylophone Gen X-1 portable analogue synthesizer is the next generation. From quirky beats to haunting melodies, you can twist and warp every note in the palm of your hand.

Beginner or music pro, if you like the synth sound you’ll love the Stylophone Gen X-1

PLAYABILITY
Two ways to make sounds with the stylus. The keyboard to make distinct notes and the sound strip to slide between notes on a scale.

PORTABILITY
Take this synth anywhere. Battery operated with built in speaker. Audio line out for headphones and/or external speaker. Audio in to use as an effects unit.

ENRICH THAT SOUND
New features include, LFO (with square and triangle waves), Low pass filter (cutoff/resonance), Envelope (attack/decay).

ANALOG DELAY FEATURE
Add space to your sound with delay time, feedback and level.

ADDED FEATURES
Sub octaves -1 & -2 switch, enrich your sound by adding a second frequency below your source sound. The Pulse Width Modulation button can be used to create a chorus effect.

CONNECTIVITY
Connect the Stylophone Gen X-1 to your computer and other gear to enhance your sound possibilities! Sound from effects pedals, samples from your phone, and other music gear can be twisted and warped with the Stylophone Gen X-1.

Video: https://youtu.be/JicPeSVO8Io

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime Go? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime Go, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime Go
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

EAN 8718969214339
Color Black
Weight 1,57 kg / 3.454 lbs
Outer Dimensions (W x H x D) 48.5 x 36.0 x 12.4 cm | 19.0 x 14.2 x 4.9 inch
Inner Dimensions (W x H x D) 41.7 x 27.9 x 11.4 cm | 16.4 x 10.9 x 4.5 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Denon DJ Prime Go Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Akai Force controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai Force controller, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

• Weight: 1,57 kg / 3.454 lbs
• EAN: 8718969212076
• Outer Dimensions (W x H x D): 50 x 36 x 12.4 cm | 19.7 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 48 x 34 x 7.8 cm | 18.9 x 13.4 x 3.1 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior, Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy-duty handle
• Convenient shoulder strap
• Easy grip zipper puller
• Fits: Akai Force

The Bundle contains 10x RTM C90 tapes.

RTM is proud to continue pushing the boundaries of analogue recording through audio cassettes. The C60 & C90 series is based on the legendary Studio Master tape formula (SM900). The series enables users to record and playback audio at the highest level.

• BLANK CASSETTES
• TYPE ONE: FERRIC OXIDE
• LOW NOISE
• NORMAL BIAS
• LEGENDARY FORMULA
• HIGH QUALITY 5 SCREW SHELL WITH BRIDGE
• MINIMAL PRINT-THROUGH
• PRODUCED FROM 2020 ONWARDS
• MADE IN FRANCE

90 min audio cassette based on legendary SM900 formula

Features:
• Width: 3,81mm
• Length: 131m
• Recording time: 90min max
• Clear 5-screws tabs-in cassette, with black bridge
• Base film: Polyester
• Base film thickness: 8 µm
• Coating thickness: 5 µm
• Total thickness: 13 µm
• Coercivity: 370 Oe
• Saturation retentivity: 1480 G
• Oxide: Fe2O3

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Weight 4,25 kg

This 12" record case is a 50/50 split box that offers the ideal features for a successful DJ set. The lid of the DJ record case can be easily removed and used as a second register box when DJing. The lid is also equipped with non-slip feet that ensure a secure stand.

The sturdy butterfly lock protects against theft. Thanks to a high-quality construction of the record case made of aluminium, plastic-coated MDF panels and rivets, shocks, heat and light are shielded from the records. A soft inner padding offers additional protection against shocks. The handle of the record case is flush-mounted, which is why the aluminium record cases can be stacked.

Technical details:

• DJ Record Case with a maximum capacity of 100 12-inch records
• 50/50 split box with removable lid
• Fixed lid, butterfly lock
• Material: aluminium, plastic-coated MDF panels
• Metal protective corners protect against knocks and wear and tear
• Non-slip rubber feet on underside and lid
• Available in three colours: Silver/silver, silver/black; black/black
• Dimensions (LxWxH): 36 x 36 x 37 cm
• Dimensions inside: 34 x 34 x 35 cm
• Weight 4,25 kg

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

FEATURES
• Fits approximately up to 80 12"/LP vinyl records
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several additional rivets for improved solidity
• Capacity will depend on the thickness of the records & their packaging

DIMENSIONS:
(Width x Height x Depth)

Outer: 35 x 36 x 29,5 cm
Inner: 33 x 34 x 27,5 cm

Weight: 2,5 kg | 5,5 lbs

Introducing the CTRL CASE APC 64 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Akai APC 64 it is a very lightweight and convenient solution to carry the instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• AKAI APC 64

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 41 x 32 x 10 cm
• Inner measures: 37,5 x 28,5 x 9 cm
• Weight: 1,1 kg

Phono preamplifier

Phono Box E: Pure vinyl listening pleasure at an absolute bargain price!

Today, many amplifiers do not have a specific phono cartridge input. Phono Box E is an ideal phono preamplifier for these hifi systems. Phono Box E accepts MM cartridges and offers an audiophile music experience at an entry level price. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Phono Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Phono Box E can be connected easily to a line-input (AUX etc) of your amplifier.

Features:
• Amplification and RIAA equalisation for MM cartridges
• Design principle inspired by Dr. Sykora
• SMD circuitry
• Special low noise components
• Internal metal shielding
• Small size allows installation close to record player
• Gold plated RCA connection sockets
• Outboard power supply included
• Black casing

Technical Specifications:
• Input impedance: 47 kohms
• Input capacitance: 120 pF
• Gain: 40 dB
• Output voltage(typically): 500mV/ 1kHz at 5mV/1kHz
• Noise floor: 88 dB (A weighted)
• THD: <0,05%
• RIAA deviation: deviation max. 0.5 dB/ 20 Hz - 20 kHz
• Input: 1 pair RCA socket
• Output: 1 pair RCA socket
• Outboard power supply: 18 V/500 mA DC; 220 - 240 V, 50 Hz
• Standby power consumption: < 1 watt
• Power consumption: 20 mA DC
• Dimension W x H x D (D with sockets): 120 x 32 x 100 (106) mm
• Weight: 269 g without power supply

Nagaoka Headshell HSAL-01

This headshell has been designed with the utmost precision to give you an outstanding listening experience.

Design for maximum ease of use:
When placing the needle, the finger lift design provides an excellent view of the needle tip. The finger hook is easy to use and the angle can be easily held with your fingers. Every detail has been designed with the utmost care to ensure uncomplicated and pleasant use.

Ideal for NAGAOKA JT-80 Series and many other pickups:
This high-quality headshell was developed specifically for the NAGAOKA JT-80 series to ensure an optimal combination of precision and performance. Enjoy music in its purest form with this perfectly coordinated combination.

Of course, the Nagaoka HSAL-01 can also be combined with other pickups. The elongated holes allow the perfect positioning of your pickup and the included cables leave enough room for adjustment.

Easy installation:
The Nagaoka Headshell HSAL-01 comes with an installation guide to give you an effortless setup. The package contains all the necessary items including mounting screws to make the installation process easier for you.

Product specifications:
• Housing material: aluminum
• Pin: Gold plated
• Weight: 6.8g (approximate value, excluding mounting screws)
• Frequency response: 20Hz - 20kHz
• Box contents: headshell housing, lead wire, 2 × 12mm screws, 2 × 6mm screws, compatible nuts, washers.

ULTRA PORTABLE PHONO/LINE USB RECORDING INTERFACE
The description of the Reloop iPhono 2 could not be more appropriate:
"Digitize your vinyl tracks for playing with any current DJ software - quickly and easily."

VARIETY OF CONNECTION OPTIONS
The process of filing your irreplaceable vinyl collection just became a piece of cake. By plugging a turntable into the Reloop iPhono 2 USB audio interface, and then connecting this to a computer (PC or Mac), precious vinyl rarities can now be recorded digitally in crystal clear CD quality thanks to the high-quality digital drivers. It goes without saying that any other audio sources, such as tape decks or Minidisc players can also be connected to the interface for recording.

ENDLESS POSSIBILITIES
But there is more! Why not hook up a mixer to the Reloop iPhono 2 and record your entire DJ set to your computer? The mix can then be instantly uploaded to share with others online, or could just as easily be burnt to a CD for physical distribution - the possibilities are endless.

RECORD YOUR VINYL!
The Reloop iPhono 2 even comes with a full copy of PCDJ DJ LE software and a sample pack from Loop Masters.

FEATURES
• USB phono/line recording interface
• Finish and design in popular Play interface style
• 16 bit A/D converter
• PH/LN switch
• Digitize vinyl easily and quickly
• Inclusive PCDJ DJ LE
• Plug'n'Play system: no additional drivers necessary
• Headphones and RCA output for playback of recorded audio(soundcard) or monitoring through computer (software playthrough)
• Input gain dial
• Signal/clip LED
• Output LED
• Anti-theft: Kensington slot
• USB bus powered

TECHNICAL DATA
• Inputs: 1x phono/line (RCA)
• Ground GND screw
• Outputs: 1x PC (mini USB), 1x output (RCA), 1x headphones (6,3 mm jack)
• Dimensions: 130 x 49 x 115 mm
• Weight: 93 g
• Incl. USB cable, PCDJ DJ software (Reloop edition LE full version) and Loop Masters sample pack

Manual: https://www.reloop.com/media/catalog/product/pdf/2/2/4/224792_Reloop_IM.pdf

Nightclub E Replacement stylus
Nightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.

Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.

It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.

The special elliptical stylus guarantees sound with insignificant scratching.

Nightclub E Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommmende tracking force - 65 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Nightclub Series

Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• Ableton Push III
• Ableton Push I
• Ableton Push

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 43 x 37 x 10,5 cm
• Inner measures: 39 x 33 x 5 cm
• Weight: 1,3 kg

The CTRL MPC LIVE II is custom designed to a hold the Akai MPC LIVE II and is a very lightweight and convenient solution to carry your MPC well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:

• Akai MPC LIVE II
• Akai MPC Live
• Akai MPC Touch

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam padding to protect knobs, faders and pads
• Comfortable carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 44 x 29 x 13 cm
• Inner measures: 42 x 27 x 11 cm
• Weight: 1,26 kg
• Color: black/black (Item-No.: 48032 / EAN-Code: 4041212480323)

Despite the tight tolerances of the hole in the center of the vinyl,

(0.286'' +0.001'' / -0.002''),

it sometimes happens that the hole is less than 0.284'' min.

In solution to this problem, we offer you our reamer

STABLE 33.33

Completely redesigned to allow you better control when correcting the diameter in the center of your vinyl, this small tool is very

simple to use.

You can now easily correct this small deviation of the diameter in the center of your vinyls which were too tight to put on your turntable.

Video: https://youtu.be/b8l5BRlgSHM

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

The Reloop 80 Record Case with its slanted construction offers a maximum ease of use while digging for records due to the angular sloping design of the two halves. When in divided mode, the records in the front are superiorly visible and available, while the rearmost part of the records are superiorly supported and protected compared to a conventional 50/50 division. Reloop's case innovation.

FEATURES
• Classic record case
• Robust construction made of aluminium-coated wood
• Inclined cut case with 50/50 division
• Lockable low profile butterfly lock
• Thick foam padding
• Fold-away handle
• Removable top
• Round protective angles
• Protective rubber feet on top and bottom

TECHNICAL DATA
• Dimensions: 360 x 275 x 350 mm
• Weight: 4.0 kg
• Holds approximately 80 records

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model Phono RCA-C:
• Interconnect cable with earthing wire, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model Phono RCA-C: 123 cm