DJ Equipment 438 Items

Cleaning spray for records

Application: Spray the record evenly at short intervals for a few seconds and then dry.

Antistatic cleaning spray for records. Cleaning will reduce the frictional resistance of the needle.

Cleaning spray for records. The high cleaning effect suppresses static electricity. Wipe dry after spraying.

Cleaning gel for records, floor coverings, joints, blinds or keyboards. Stubborn dirt is reliably removed. Can be used several times.

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

RECORD LABEL PROTECTOR FOR CLEANING

Before cleaning the record, the label protector is screwed onto the record label from both sides so that it does not come into contact with water. In this way, record labels are preserved for a long time.

Replacement stylus Nagaoka JTS-80LB for the pickup JT-80LB.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

With its round diamond, the MP-100 cartridge is particularly suitable for older records. Even scratches and dirt do not affect the pleasant, neutral sound that this system makes possible. The MP-100 is the most affordable scanner in the MP range.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height 18mm
• Needle cut: Round 0.6mm
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel separation (1kHz): > 22 dB
• Channel balance (1kHz): < 2.0 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 21 mN (18-23 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P100
• Cartridge type: without head shell

ATH-CKS50TW
ATH-CKS50TW truly wireless headphones combine advanced acoustic technology for stunning bass with a comfortable and secure fit, while a high-capacity battery provides up to 20 hours of powerful, continuous audio (up to 50 hours with the charging case). All you have to do is let the music take control.

The newly developed large-diameter drivers (9mm Solid Bass HD TWS drivers) deliver deep bass while the CKS50TW shape provides a snug fit - an important factor for truly wireless headphones as the airtight fit prevents the bass from escaping to deliver a unique and intimate music experience.

Make your voice heard with Qualcomm® cVc™ Generation 8.0
Enjoy improved microphone performance in calls, whether in the office, working from home or in an online class. The sidetone function of the CKS50TW also allows you to hear your own voice during calls for more natural-sounding conversations, feeling almost as if you weren’t wearing headphones at all.

Built-in button design for on-the-go operation
Audio-Technica’s ATH-CKS50TW wireless earbuds are designed for reliable, stress-free operation for a more enjoyable truly wireless listening experience. The left button adjusts the volume and switches between hear-through and noise-cancelling functions, while the right button lets you easily start/stop playback, skip between songs, or enable quick hear-through.

Rain and splash-proof design
The CKS50TW wireless earbuds boast an IPX4*-equivalent JIS protection rating. The splash-proof design means you never have to worry about keeping your truly wireless earbuds dry in sudden rain showers or when exercising.

*An IPX4-equivalent rating signifies the product will not be adversely affected by water splashing from any direction. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof.

Greater customization
Personalize the operation of your Audio-Technica earbuds via Audio-Technica’s Connect app, available from both Apple and Google Play. Take full control of your sound, switching between codecs, experimenting with equalizer pre-sets or adjusting your volume levels. You can even use the app to help locate your earbuds, so you’ll always have a stunning soundscape to accompany your day to day.

Interruption-free listening

Packed full of useful functions, the CKS50TW earbuds are compact, with a unique antenna structure designed to ensure stable connectivity while fitting in limited space. This helps prevent sound from being interrupted even in train stations or other crowded locations.

The ATH-CKS50TW earbuds also feature Qualcomm® TrueWireless Mirroring.

Independent transmission to the left and right sides reduces sound interruptions and delays for videos on all devices, including Android and iOS smartphones.

Automatic power-on and fast pair convenience

Once paired with your device, Audio-Technica’s CKS50TW wireless headphones automatically turn on and connect to your Android or Google device** when they are removed from the case for quick usability. When the truly wireless earbuds are put back in the case, they power down and begin charging. The power can also be turned on/off directly from the headphones.

** Only one Android device can be paired by using Fast Pair. Google and Android are trademarks of Google LLC.

Check up on your charge with LED indicators

The CKS50TW’s four LED indicators light up or flash whenever the charging case is opened or closed, so the user can see the charging status or remaining charging case battery power at a glance.

Sony’s 360 Reality Audio certified

The combination of 360 Reality Audio and Audio-Technica’s long-cultivated acoustic technology allows listeners to fully experience the world of sound envisioned by the creators.

Features
Bluetooth® 5.2
50 hour battery (20 hours in the earbuds + 30 hours in the charging case)
Fast charging support - 10 minutes = 90 minutes of power (approx)
Multi-point pairing function for registering multiple devices
9mm Solid Bass HD TWS drivers
Noise-cancelling mode
Hear-through function
Built-in mic and controls
IPX4
Qualcomm® cVc™ Generation 8.0
Qualcomm® TrueWireless Mirroring
SCMS-T protected content and 1seg broadcasting support
Voice guidance function*1
Compatible with Sony’s 360 Reality Audio*2
*1 Voice guidance can be used for notifications, including power and pairing statuses as well as remaining battery level (High, Medium, or Low).
*2 Requires use of subscription to compatible online music service – subscription fees may apply. Compatible services may not be available in certain countries/regions. Please visit https://www.sony.net/360RA to check compatibility of the service. "SONY'' is a registered trademark of Sony Group Corporation.

Specifications
Headphones
Type Dynamic
Driver Diameter 9 mm
Frequency Response 5 to 20,000 Hz
Sensitivity 110 dB/mW
Impedance 20 ohms
Weight Headphones: Approx. 8 g (0.28 oz) (L side), approx. 8 g (0.28 oz) (R side); Charging case: Approx. 60 g (2.1 oz)
Charging Time Headphones: Approx. 3 hours
Charging case: Approx. 3 hours
The figures above depend on operating conditions.
Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
Operating Time Continuous transmission time (music playback): Max. approx. 20 hours (headphones), Max. approx. 50 hours (if charging case is used in combination)
The figures above depend on operating conditions.
Microphone Type MEMS type
Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
Microphone Frequency Response 100 to 8,000 Hz
Microphone Polar Pattern Omnidirectional
Power Supply Headphones: DC 3.7 V lithium ion battery
Charging case: DC 3.7 V lithium ion battery
Water-Resistant (drip-proof) Performance IPX4
Headphones only
Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips (XS, S, M, L)
Notes For product improvement, the product is subject to modification without notice.
Bluetooth®
Bluetooth® Version Bluetooth version 5.2
Operating Range Line of sight - approx. 10 m (33')
Maximum RF Output 10 mW EIRP
Frequency Band 2.402 GHz to 2.480 GHz
Modulation Method GFSK, Pi/4DQPSK, 8DPSK
Spread Spectrum Method FHSS
Compatible Bluetooth Profiles A2DP, AVRCP, HFP
Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
Supported Content Protection Method SCMS-T
Supported Sample Rates 44.1 kHz, 48 kHz
Supported Bit Rates 16 bit, 24 bit
When using Qualcomm® aptX™ Adaptive audio.
Transmission Band 20 to 20,000 Hz

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

The new CTRL Case DDJ-REV5 / DDJ-REV7 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 / DDJ-REV7 controller. Made of lightweight and rigid Durashock molded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

FITS:
• Pioneer DDJ-REV5
• Pioneer DDJ-REV7

BASICS:
• Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
• Comfortable, rivet reinforced carrying handles and shoulder strap
• Compatible with Decksaver® cover

SPECS:
• Outer measures: 83 x 46 x 14 cm
• Inner measures: 73 x 37 x 11 cm
• Weight: 3 kg

FULLY AUTOMATIC PLUG & PLAY-TURNTABLE

The uncomplicated one from Dual with aspirations. The CS 329 uses sophisticated technology for entry-level analogue music playback.

With Plug & Play, you get a complete, ready-to-use package; all components are pre-assembled and permanently set. Plug in and get started!

As a fully automatic machine, the CS 329 offers ideal convenience. The tonearm swivels, lowers and raises autonomously at the touch of a button. All you have to do is put on the record and press the start button.

DETAILS:
Plinth: MDF - Plastic
• Elastomer vibration absorber integrated inside the feet
• Removable dust cover
Platter: Aluminium Die-cast
• Precise aluminium die-cast
• Heavy rubber mat for resonance damping
Tonearm: Straight, Plug and Play
• Plug & Play: all adjustments are factory fixed
• All functions can be fully automatic or manual
Drive: DC- Motor / Belt
• Rubber mountings for vibration decoupling
• Precision cut belt for lower wow & flutter

TECHNICAL SPECIFICATIONS:
Motor:
• Drive: Belt
• Speed settings: 33/45
• Wow & Flutter: < ±0,12 % (DIN WTD)

Tonearm:
• Auto-Start/-Stop-Function: Automatic
• Bearing: Ball-bearing
• Effective length: 221,5 mm
• Offset Angle: 25,6°
• Overhang: 19 mm
• Type: statically balanced
• Stylus Pressure Range: Fixed
• Cartridge Weight Range: N / A
• Factory installed pick up: Audio-Technica AT91

Platter:
• Material: Aluminium die-cast
• Mat: Rubber 2,5 mm
• Bearing: Hardened steel spindle Brass bushing (inverted)
• Diameter: 297 mm
• Weight (incl. Mat): 667 g

Plinth:
• Material: Plastic / MDF
• Surface finish: Black
• Feet: Ø 62 mm / Elastomer
• Connection: RCA cable (fixed)
• Connection to Phono Input: ✓
• Connection to Line Input: ✓
• Digital Output: ✕
• Dimension, closed dustcover: 435 x 372 x 132 mm
• Dimension, open dustcover: T: 405 mm / H: 390 mm
• Weight: 5 kg
• Power plug AC / DC: External power supply

Manual: https://hifi.dual.de/wp-content/uploads/2022/09/BDA-CS-329_manual_V1_DE_EN.pdf