DJ Equipment 871 Items

A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio Arrow/ Apollo Solo? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Arrow/ Apollo Solo, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

• Weight: 0,57 kg / 1.254 lbs
• EAN: 8718969211673
• Outer Dimensions (W x H x D): 22 x 16.6 x 6.9 cm | 8.7 x 6.5 x 2.7 inch
• Inner Dimensions (W x H x D): 18 x 12.6 x 5.9 cm | 7.1 x 4.9 x 2.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Universal Audio Arrow / Apollo Solo

A Digital DJ looking for a professional, durable case solution for your Pioneer RMX1000 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer RMX-1000 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,45 kg / 0.99 lbs
• EAN: 8717228278310
• Outer Dimensions (W x H x D): cm: 37 x 19 x 7 | inch: 14.5 x 7.5 x 2.8
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper puller
• Convenient carry handles

Fits:
• Pioneer RMX-1000 Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Launchpad X? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad X, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Launchpad X
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

WIDTH
30,20cm

HEIGHT
30,20cm

DEPTH
4,00cm

WEIGHT
0,99kg

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Circuit Tracks/Rhythm? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Circuit Tracks/Rhythm, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Circuit Tracks/ Rhythm
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
29,50cm

HEIGHT
25,00cm

DEPTH
7,00cm

WEIGHT
0,99kg

A Digital DJ looking for a professional, durable case solution for your NI Traktor Kontrol S4 MK3/ S2 MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor Kontrol S4 MK3/ S2 MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 1,89 kg / 4.158 lbs
• EAN: 8718969213073
• Outer Dimensions (W x H x D): 61 x 38 x 13 cm | 24 x 14.9 x 5.1 inch
• Inner Dimensions (W x H x D): 58.5 x 35.5 x 8.4 cm | 23 x 13.9 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Shoulder strap

Fits:
• NI Traktor Kontrol S4 MK3/ S2 MK3 Controller
• Pioneer DDJ-REV1
• Numark Mixstream Pro
• Behringer RD-8
• Roland DJ-707M

A Digital DJ looking for a professional, durable case solution for your Korg Electribe/ Electribe Sampler? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Electribe/ Electribe Sampler, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969210065
• Outer Dimensions (W x H x D): cm: 39.3 x 24.3 x 5.5 | inch: 15.5 x 9.6 x 2.2
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Korg Electribe, Electribe Sampler

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime Go? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime Go, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime Go
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

EAN 8718969214339
Color Black
Weight 1,57 kg / 3.454 lbs
Outer Dimensions (W x H x D) 48.5 x 36.0 x 12.4 cm | 19.0 x 14.2 x 4.9 inch
Inner Dimensions (W x H x D) 41.7 x 27.9 x 11.4 cm | 16.4 x 10.9 x 4.5 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Denon DJ Prime Go Controller

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,75 kg / 3.85 lbs
• EAN: 8717228279850
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 59.3 x 35.3 x 9.0 cm | 23.3 x 13.9 x 3.5 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-RR, DDJ-SB3, DDJ-SB2, DDJ-SR2, DDJ-SR, DDJ-Ergo V
• NI Traktor Kontrol S3, S4 MK3, S2 MK3, S5, S4 MK2, S2 MK2, Maschine Studio, Komplete Kontrol A25, Komplete Kontrol S25
• Numark Mixstream Pro, Mixtrack Pro FX, Mixtrack Platinum FX, Mixtrack Platinum, NVII, Mixtrack Pro 3, Mixtrack Quad, N4, iDJ Pro
• Denon MC4000
• Akai MPC Renaissance, MPK225, MPK25
• Reloop Beatmix 4
• Novation 25 SL MK2, Nocturn 25, Impulse 25
• Roland DJ-707M, System-1 Plug Out Synthesizer
• Hercules DJControl Inpulse 300
• M-Audio Axiom 25
• Allen & Heath Xone 4D
• Mixars Primo
• Alesis Q25, QX25
• Korg Modwave, Opsix

A Digital DJ/Producer looking for a professional, durable case solution for your Akai Force controller? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai Force controller, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

• Weight: 1,57 kg / 3.454 lbs
• EAN: 8718969212076
• Outer Dimensions (W x H x D): 50 x 36 x 12.4 cm | 19.7 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 48 x 34 x 7.8 cm | 18.9 x 13.4 x 3.1 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior, Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Heavy-duty handle
• Convenient shoulder strap
• Easy grip zipper puller
• Fits: Akai Force

Cable without "sound"

Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals.

Connect it – model series C

Electrically shielded with conductors made of OFC copper

Model RCA-C;
• Interconnect cable, 4x RCA phono plugs.

Technical Specifications:
• capacity / meter: 65 pF
• Length Model RCA-C: 41 cm

Trendy headphone for iPod & Co

super loud, super lightweight & super cool

A cool headphone for the best possible sound reproduction of portable players, like iPod & Co. Hear it Two offers far better audio quality with higher sound pressure levels and superior looks, than many others. Soft and comfortable ear-cushions are swivel mountedmaking it easy to transport Hear it Two in a flat carry case. A high-quality signal-cable made from oxygen-free copper (HP-OFC) with bending protection and gold-plated jack-plug guarantees trouble free performance. Hear it headphones prove again, that outstanding quality does not need to be expensive.

Features:
• Super loud – super light – super cool
• more SPL with iPod & Co (107 dB)
• Lightweight design (77 g)
• adjustable ear-cushion position
• flat transport possible
• high wear comfort
• 3.5 mm jack plug

Technical Specifications:
• Transducer: 30 mm Neodymium driver (dynamic)
• Head-band: adjustable
• Frequency response: 18-22.000 Hz
• Cable material: HPOFC
• Cable length: 1.2 m
• Sensitivity: 107 dB @ 1mW
• Max. sound pressure level: 130 dB
• Impedance: 32 ohms
• Maximum input power: 50 mW
• Connector: 3.5 mm jack plug
• Weight (without cable): 77 g

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Heavy weight record puck

This heavy Record Puck ensures a firm fit between the record and the platter surface.

Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.

We recommend using heavy weight clamps on RPM, Signature & Xtension series turntables.

The alternative way to achieve this effect on smaller turntables is our record clamp Clamp it.

Features:
• Reduces unwanted vibrations
• Helps with optimum playback of warped records

Technical Specifications:
• Material: Brass
• Weight: 800g
• Diameter: 780mm
• Height: 260mm

Stabilize your records

Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

OPTIMIZED PLAYBACK OF YOUR RECORDS
This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications:
• Material: Nickel-plated aluminium
• Weight: 190g
• Diameter: 78mm
• Height: 16mm

Dust protection cover

Cover it 1 is a crystal clear acrylic cover for turntables. It protects the turntable & its needle and suits for:
• Ground it deluxe 1
• Ground it deluxe 3
• Ground it Carbon

Turntables:
• Signature 10
• RPM 10 Carbon
• and all smaller Turntables

Technical Specifications:
• Dimensions (WHD): 525 x 290 x 425 mm (Outside)
• Dimensions (WHD): 515 x 285 x 415 mm (Inside)
• Weight 4.3 kg

Equipment base

Ground it deluxe 1 suitable for:
• Xtension 9 Evolution, Xtension 10 Evolution, Xtension 12 Evolution
• Signature 10
• RPM 1 Carbon, RPM 3 Carbon, RPM 5 Carbon, RPM 9 Carbon, RPM 10 Carbon

Features:
• Resonance free placement for turntables & hifi
• Heavy weight base filled with granular damping
• 2 models with adjustable spikes (3 or 4 may be fitted)
• 1 model with height adjustable magnetic feet
• Dark grey piano lacquer finish
• Matches charcoal finish of Pro-Ject turntables

Technical Specifications:
• Dimensions: 500 x 65 (45)x 400 mm incl spikes (without spikes)
• Weight: 11,6 kg

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

Spirit level

Spirit level for optimum positioning of a turntable.

Cartridge alignment tool

• Tool for cartridge alignment and adjustment
• Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
• Adaptable to accommodate differing tonearm lengths
• Also suitable for other manufacturers’ tonearms
• Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length

Record broom

Easy and effective cleaning arm

Cleaning a record collection can be tiresome. There are many ways to de-dust your precious collection. All of them have one thing in common, you have to clean the records while they are put at rest. Sweep it E goes the other way. You can enjoy listening to your records while they are being cleaned. Simply place Sweep it E on your turntable and make sure that the brush is placed before the needle. This way the grooves will get clean right before the cartridge can pick up sound from it.
Sweep it E is made out of durable and resistant aluminium to make sure it lasts a long cleaning-life. With the heavy weight base it stands firmly on your turntable. The uni-pivot arm follows the grooves of your record and cleans them effectively. When you don‘t need Sweep it E you can simply put the arm on its dedicated arm-rest for a comfortable placement. The soft hair-brush guarantees that the records won‘t be harmed during the cleaning process.

Features:
• Gently cleans your vinyl while playing
• Follows the grooves
• Heavy weight base for secure placement
• Uni-pivot design
• Easy setup
• Suitable for Primary, Essential and Debut turntables
• Elegant looks
• Durable materials
• Brush made of natural hair

Technical Specifications:
• Weight: 430 g
• Arm-length: 226 mm
• Arm material: Aluminium
• Brush: Hair

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:
•T1 with Ortofon OM 5E cartridge
•Directly soldered Connect it E Phono Cable
•Felt mat
•Dust cover
•Adapter for 7“ singles
•Power supply
•Allen key, stylus pressure gauge

Features
•Belt-driven
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Matt White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed 33,45 (manual speed change)
•Principle Belt drive
•Speed variance 33: 0.7% 45: 0.6%
•Wow & Flutter 33: 0.25% 45: 0.23%
•Platter Heavy 8mm, blasted-glass platter with felt mat
•Main bearing Stainless steel/brass
•Signal to noise 65dB
•Tonearm 8.6” aluminium
•Effective arm length 218.5 mm
•Overhang 22.0 mm
•Effective tonearm mass 8.0 g
•Counterweight for mass 5 - 10g (pre-mounted)
•Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
•Included accessories dustcover, feltmat
•Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
•Power consumption 3 Watt max
•Dimensions 415x100x335 mm (WxHxD)
•Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2020/07/T1_T1_Phono_SB_T1_BT_Manual.pdf

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

The Gemini TT-4000 High Torque direct drive turntable features a redesigned chassis with reinforced cabinet construction. The TT-4000 uses a precision-machined die-cast aluminum platter for a stable stand in the club. The shock-absorbing rubber feet absorb shock or vibration during operation.

It is ideal for DJs, audiophiles and casual listeners alike. The 16-pole brushless 3-phase DC motor drives the TT-4000's direct drive. The turntable features precise pitch control of +/- 10%. A statically balanced S-shaped tonearm features a hydraulic lift and anti-skate mechanism.

For those who want to digitize their record collection, the Gemini TT-4000 offers a USB port for connection to PC/Mac. This way you can easily record and digitize your vinyl albums.

Thanks to a built-in phono preamp that allows for a line-level output, the TT-4000 does not require grounding.

Features:
• Direct drive turntable with very powerful torque
• Ideal for DJing, listening to music or digitizing
• USB port for connection to PC/Mac
• Very strong torque of 4.5 kg/cm
• Balanced tonearm in S-shape
• Damped rubber feet absorb shocks and vibrations
• Phono preamp with line output built in - no grounding required
• Pitch control of +/- 10%

Technical data:
• Direct driven DC motor with high torque (4.5 kg/cm)
• Signal-to-noise ratio: 40 dB
• Turntable weight: 523 g
• Pitch adjustment: +/- 10%
• Audio interface: USB 2.0 | sampling rate: 48k, 44.1k, 16 bit
• Power consumption: approx. 5.5 W
• Power supply: AC 115V - 60Hz | 230V - 50Hz
• Weight: 6.35 kg
• Dimensions (W x D x H): 490 x 315 x 262 mm

Scope of delivery:
• Gemini TT-4000 Turntable
• Power cable
• RCA cable
• Headshell with pickup/stylus
• Slipmat
• 45 adapters
• User manual & warranty information
• Audacity Software CD V2.1.3

The AT-HS4BK is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.
The AT-HS4BK features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Available in black (AT-HS4BK) and silver (AT-HS4SV).

Functions:
• Universal ½"-mount headshell for 4-pin tonearms
• Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
• Angled shape suitable for straight tonearms
• Finger lift enables precise stylus placement
• Includes lead wires and mounting screws

Specifications:
• Material: Aluminum
• Connector: Aluminum
• Weight: 8.5 g (0.3 oz), including lead wire
• Dimensions: 12.5 mm (0.5") H × 20.7 mm (0.8") W × 54.0 mm (2.1") D
• Accessories: Installation screws (10 mm × 2, 8 mm × 2), nuts x 2, plastic washers x 2

The AT-HS4BK is a universal ½"-mount headshell designed for use with straight 4-pin tonearms.
The AT-HS4BK features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Available in black (AT-HS4BK) and silver (AT-HS4SV).

Functions:
• Universal ½"-mount headshell for 4-pin tonearms
• Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
• Angled shape suitable for straight tonearms
• Finger lift enables precise stylus placement
• Includes lead wires and mounting screws

Specifications:
• Material: Aluminum
• Connector: Aluminum
• Weight: 8.5 g (0.3 oz), including lead wire
• Dimensions: 12.5 mm (0.5") H × 20.7 mm (0.8") W × 54.0 mm (2.1") D
• Accessories: Installation screws (10 mm × 2, 8 mm × 2), nuts x 2, plastic washers x 2

Aluminium die-cast headshell, designed for AT-LP3.

Removable, universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Available in vivid red, it is suitable for 1/2" mount cartridges and 4-pin turntable arms.

Specifications:
• Angled shape suitable for AT-LP3’s straight tonearm
• Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms.
• Finger lift allows precise stylus placement
• Vivid red headshell design
• Includes lead wires and mounting screws

18g adjustable through hole type headshell with OFC lead-wires.

AT-LH18H 18g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

18g TechniHard™ adjustable headshell with AT6101 quad wire.

A 18g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

15g adjustable through hole type headshell with OFC lead-wires.

AT-LH15H 15g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

15g TechniHard™ adjustable headshell with AT6101 quad wire.

A 15g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH15/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.

15g adjustable through hole type headshell with OFC lead-wires.

AT-LH13H 13g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)

Open-back headphones with self-adjusting headband support mechanism - suitable for hours of use with home audio and video systems. Offers full, high-quality sound.

Features:
• Open-air design, featuring 40mm CCAW drivers, delivers rich, detailed sound
• Honeycomb-punched aluminium housings enable clear sound reproduction
• Self-adjusting headband support provides comfortable fit even during extended wear
• Soft, cloth earpads reduce pressure on your ears

Specifications:
• Driver Diameter: Open-back dynamic 40mm
• Frequency Response: 18 - 25,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 93 dB/mW
• Impedance: 35 ohms
• Weight: 240g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Closed-back dynamic headphones
High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.

Features:
• Large 53 mm CCAW bobbin-wound voice coil drivers reproduce full, wide-range sound
• Anti-vibration aluminium housings ensure rich sound reproduction
• Self-adjusting headband support mechanism automatically delivers the best possible fit
• Bass-ports create tight, deep bass sound
• Soft foam earpads provide extra comfort while listening

Specifications:
• Driver Diameter: Closed-back dynamic 53mm
• Frequency Response: 10 - 25,000 Hz
• Maximum Input Power: 1,800mW
• Sensitivity: 106 dB/mW
• Impedance: 40 ohms
• Weight: 270g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

Closed-back dynamic headphones
Entry-level closed-back headphones with comfortable fit for use with home audio and video systems. Offers high-quality sound for enhanced enjoyment of movies and music.

Features:
• Newly designed 40 mm drivers reproduce clear mid-low frequencies
• Adjustable headband support provides comfortable fit even during extended wear
• Large headband delivers comfortable and stable fit
• Contoured earpads fit naturally over ears to help to provide rich bass

Specifications:
• Driver Diameter: Closed-back dynamic 40mm
• Frequency Response: 20 - 22,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 100 dB/mW
• Impedance: 40 ohms
• Weight: 210g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug

High-Fidelity Closed-Back Headphones
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A990Z high-fidelity headphones deliver a premium high-fidelity sound performance.

High-Fidelity Art Monitor Series
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A990Z high-fidelity headphones deliver a premium high-fidelity sound performance. Featuring newly designed 53mm drivers, hand-assembled in Japan, that deliver clear, natural high-resolution audio reproduction, and lightweight aluminium housings with a deep metallic forest green finish.

Japanese Precision
Each newly designed 53mm driver is hand-assembled with Japanese precision for increased reliability and performance.

Comfortable Fit
Premium, soft earpads provide a comfortable fit for long listening periods.

Extended Bass Frequency Range
Double Air Damping Structure (D.A.D.S.) optimises the internal airflow to provide an extended bass frequency range for deep bass reproduction.

Enhanced 3d Wing Support
Redesigned, self-adjusting 3D Wing Support Housing that perfectly adapts to the user’s head for a closer, more stable fit providing extra comfort for long listening periods.

Premium Earpads
Offering a comfortable fit for long listening periods, the A990Z headphones include premium, soft earpads.

Superior Design
Lightweight aluminium housings with a deep metallic forest green finish.

Tangle-Free Cable
Includes a 3.0m cloth-wrapped tangle-free cable.

Features:
• Hand-assembled in Japan, the A990Z features newly designed 53mm drivers for a premium high-fidelity sound
• Lightweight, aluminium housings with a deep metallic forest green finish
• Innovative 3D wing support for a great fit and long-wearing comfort
• Premium, soft earpads for comfortable fit
• Double Air Damping System structure provides an extended frequency range for deep bass reproduction
• 3.0 m cloth-wrapped tangle-free cable

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 – 42,000Hz
• Maximum Input Power: 2,000mW
• Sensitivity: 100dB/mW
• Impedance: 44 ohms
• Weight: 335g (without cable)
• Cable: 3.0 m
• Connector: 6.3/3.5 mm gold-plated stereo 2-way plug

ATH-PRO5X DJ Headphones - Over-ear style delivers exceptional isolation and long-wearing comfort, Maximum input power of 1,500mW enables operation at higher volume levels and Newly developed 40mm drivers reproduce extended frequency response.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 40 mm
• Frequency Response: 5 to 35,000 Hz
• Maximum Input Power: 1,500 mW
• Sensitivity: 100 dB/mW
• Impedance: 34 ohms
• Weight: 250 g (without cable and connector)
• Cable: -Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable
• Cable: -Detachable 1.2 m (3.9') straight cable
• Accessories Included: 6.3 mm (1/4") screw-on adapter

The ATH-M70x professional studio monitor headphones feature proprietary 45 mm large-aperture drivers and are tuned to accurately reproduce extreme low and high frequencies (5 to 40,000 Hz) while maintaining perfect balance. They are ideal for studio mixing and tracking, FOH, DJing, mastering, post-production, audio forensics and personal listening. Crafted for lasting durability, the studio headphones provide excellent sound isolation and are equipped with 90° swiveling earcups for easy, one-ear monitoring.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Made for the Most Critical Listening Tasks - Pure Professional Performance
This is the flagship model of the M-Series. It incorporates everything we’ve learned about designing and manufacturing professional monitor headphones.

Long Lasting Durability - Studio Headphones, Built to Last
You won’t have to worry about these headphones – they’re ruggedly constructed with key metal components to ensure lasting performance.

Professional Performance - Tuned for Mixing and Mastering
Made for the most critical listening tasks, the M70x headphones are perfectly balanced to reproduce extreme low and high frequencies (5 to 40,000 Hz).

Features:
• M-Series flagship model, tuned for extremely accurate reproduction and carefully crafted using key metal components for lasting durability
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Extended response accurately reproduces extreme low and high frequencies while maintaining perfect balance
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpads and headband provide excellent durability and comfort, and detach for easy replacement
• Perfect for studio mixing and tracking, mastering and audio forensics
• Fold-flat design for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45mm
• Frequency Response: 5 - 40,000 Hz
• Maximum Input Power: 2,000 mW @ 1KHz
• Sensitivity: 97 dB
• Impedance: 35 ohms
• Weight: 280g without cable/connector
• Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Screw-on 1/4” adapter, pouch

Direct drive turntable with USB recording

• Recording Vinyl music through PC
• Integrated stereo pre-amplifier
• 2 rated speed settings 33 RPM and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Mechanical arm lift
• Direct drive
• Removable plastic dust cover
• Included: USB cable, RCA cable
• Connection: USB-PC, RCA line output
• Measurements: 415 x 150 x 333 mm

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

Turntable with 4 speakers built-in and bluetooth reception

• Bluetooth 5.0
• 2 rated speed settings 33, and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Belt drive
• Start & stop control
• Tone & Pitch control
• 4 built-in speakers
• Output power: 40W RMS
• Pre-amplifier ON-OFF
• Plastic dust cover
• P.U. leather finishing
• included: CE-UK multiplug AC Adaptor
• Connections: RCA output, AUX in, 3,5mm earphone jack
• Power source : AC 100~240V 60/50Hz
• Power consumpting max : 35W
• Dim. unit: 425 x 360 x 190 mm (WxDxH)

Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf

Brand new from Zomo: The vinyl stand Zomo VS-Rack "Loft" is an innovative and elegant way to store your vinyl records in a modern design.
The vinyl stand is not only used to store your favourite vinyl treasures, but also as a decorative element it is a great eye-catcher for any living room.
The material is made of powder-coated steel and combines durability with timeless design.

Features:
• Offers space for 45-50 LPs (depending on the thickness of the vinyl)
• Innovative, elegant design
• An eye-catcher in every apartment
• Powder-coated steel
• High quality from Zomo

Technical specifications:
• Dimensions (W x D x H): 233 x 333 x 253 mm
• Weight: 1,2 kg

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

The Zomo RP-50 is a very practical DJ case for the first set and has a 75/25 splitting.
It has lockable snap locks, a comfortable handle and a removable top. These practical features are making this case to an interesting companion.
The Zomo RP-50 is ideal for Beginners or as an endorsement to the already remaining recordcases or recordbags.

Features:
• Capacity: approx. 50 LPs
• Light weight
• Comfortable handle
• Lockable snap locks
• Interior foam
• Cool design
• Material: solid aluminium
• Aluminium profiles
• Chrome corners

Technical Data:
• Size: 360 x 220 x 395 mm
• Weight: 2,6 kg

This fully manual turntable is modeled after the AT-LP120XUSB, but adds the convenience of Bluetooth® wireless connectivity to the existing analog and USB outputs.

Featuring a specially designed DC servo direct-drive motor and adjustable dynamic anti-skate control, the AT-LP120XBT-USB plays 33-1/3, 45, and 78 RPM records and outputs the high-fidelity audio to the device of your choice. Use the included RCA output cable along with the built-in selectable phono preamp to connect to your home stereo or powered speakers. Use the USB cable to connect to your computer and then download the free Mac- and PC-compatible Audacity recording software, or software of your choice, to start converting your records to digital audio files. Or use the Bluetooth wireless technology to pair the turntable with wireless speakers, headphones or other devices, including those that support the high-quality Qualcomm® aptX™ audio codec.

The turntable also features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"- mount headshell with an AT-VM95E Dual Moving Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E. The cartridge comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Additional professional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% adjustment range; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

High-fidelity audio with Bluetooth® wireless technology

Direct-drive, DC servo motor

Fully manual operation

Adjustable dynamic anti-skate control

Selectable 33/45/78 RPM speeds

Anti-resonance, die-cast aluminum platter with felt mat

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus

AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable

Compatible with the high-quality Qualcomm® aptX™ audio codec

Built-in switchable phono preamplifier for phono- or line-level output

Stroboscopic platter with speed indicator

Variable pitch control with quartz speed lock

Removable plug-type target light for easier cueing in low light

Damped base construction for reduced low-frequency feedback coloration

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)

Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor DC servo motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminum
Anlaufmoment >1.0 kgf.cm
Bremssystem Electronic brake
Gleichlaufschwankung <0.2% (WTD) @ 3 kHz (JIS)
Rauschabstand >50 dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
Phono-Vorverstärkung 36 dB nominal, RIAA equalized
USB-Funktionen A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above
Betriebsspannung 100 to 240 V, 50/60 Hz, 1.5A Max
Power Consumption 2.75 W
Abmessungen 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Gewicht 8 kg (17.6 lbs.), without dust cover
Accessories Included AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light
Tonearm Type Balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5 mm
Overhang 16 mm
Tracking Error Angle Less than 3 degrees
Applicable Cartridge Weight 3.5-8.5 g
Anti-skating Range 0-4 g
Replacement Stylus AT-VMN95E
Communication System Bluetooth Version 5.0
Maximum Communication Range Line of sight - approx. 10 m (33')
Compatible Bluetooth Profile A2DP
Support Codec SBC, Qualcomm® aptX™ audio

Manual: https://www.audio-technica.com/media/wysiwyg/product/pdfs/eu/AT-LP120XBT-USB_UM_162501910_V2_EN_web_200826.pdf

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

Record Cleaning & Care Kit with 4 cleaners + 1 wooden brush goats hair + 2 microfiber cloths.

The Complete KIT:
• Vinyl Record Cleaning Fluid 100 ml
• Vinyl Record Cleaning Gel 70 ml
• CD Cleaner 50 ml
• Stylus Cleaner built-in brush in cap 15 ml
• Wooden Goats Hair Brush
• 2 Microfiber Cloths
• Instructions for use

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop