DJ Equipment 1295 Items

RS-LP2 ANTI-STATIC RECORD SLEEVES

More than 35 years ago Nagaoka added them to its program under the type designation No. 102. Because they were the best. And today, in the third development generation called RS-LP2, Nagaoka still sells them - for the same reason!

More effective than any other product, the RS-LP2 prevents the vinyl from static electricity, making it easier to remove the record, protecting the groove from damage caused by dust and preventing the unsightly audible static discharge during playback. Give it a try!

• static charge is prevented
• protects your 12" vinyl records from dust damage
• the smooth cover prevents damage to your records
• one package contains 50 pieces
• Dimensions approx.: 308 x 308 mm, rounded on one side
• Made in Japan

JC-20 RECORD JACKET COVER

Protect your records from dirt and dust with these outer sleeves for 7" singles.

• dimensions: 190 x 190 x 0.10 mm
• selling unit: 20 pieces
• Made in Japan

JC-30 RECORD OUTER SLEEVES 325X325MM

To protect your 12" records from dust and other contaminants, Nagaoka has developed the JC-30 outer sleeves. Compared to the earlier model No108/3, the thickness of the sleeves has been revised to provide even more reliable protection. The outer shells measure 325 mm wide x 325 mmm high.

• dimensions: 325 x 325 x 0.10 mm
• selling unit: 30 pieces
• Made in Japan

The single adapter is made of high quality milled aluminum and ensures that the EP is centered on your turntable.

Cleaning gel for records, floor coverings, joints, blinds or keyboards. Stubborn dirt is reliably removed. Can be used several times.

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

Your record player needle also needs cleaning and care. Due to the air pollution caused by both external influences (traffic) and domestic factors (kitchen, smoking), a sticky film can form on your records over time. During playback, the stylus scrapes this deposit out of the record groove, which in turn creates a sticky film around the tip of the stylus, which in turn traps other dirt and dust on your record.

These deposits not only affect sound quality, but can even damage your favorite records. Nagaoka AM-801's special formula efficiently dissolves and removes any sticky substances trapped on the needle.

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Hear the vivid sound experience that music playback offers with Nagaoka's MP-110 tonearm. Especially in the high-frequency range, the elliptical needle cut ensures better detail resolution. This creates a live atmosphere while listening, which is otherwise known from concerts.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel Separation (1kHz): >23dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P110
• Cartridge type: without head shell

Support weight for mass drives

The weight made of stainless steel ensures a better contact between the record and the platter. This suppresses mechanical resonances, which greatly improves the scannability of the microgroove. As a result, your music becomes more detailed, has a clearer resolution and a better defined bass. The ergonomic shape ensures easy handling when placing the weight on the record. It is not necessary to screw it onto the plate mandrel. The contact weight is a little over 500 grams.

Details and technical data:
• Precisely processed by CNC milling
• Avoidance of disruptive resonances, which have a negative effect on the scanning by your pickup
• Made of solid stainless steel for the perfect combination of weight (a little more than 500 grams) and size
• Ergonomic shape for easy handling
• Diameter: 73 mm
• Height: 22mm
• Diameter of the hole for the plate mandrel: 7.5 mm
• Made in Japan

Spraying your records with the anti-static spray will reduce crackling during playback.

Cleaning spray for records

Application: Spray the record evenly at short intervals for a few seconds and then dry.

Antistatic cleaning spray for records. Cleaning will reduce the frictional resistance of the needle.

Cleaning spray for records. The high cleaning effect suppresses static electricity. Wipe dry after spraying.

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

RECORD LABEL PROTECTOR FOR CLEANING

Before cleaning the record, the label protector is screwed onto the record label from both sides so that it does not come into contact with water. In this way, record labels are preserved for a long time.

Replacement stylus Nagaoka JTS-80LB for the pickup JT-80LB.

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

With its round diamond, the MP-100 cartridge is particularly suitable for older records. Even scratches and dirt do not affect the pleasant, neutral sound that this system makes possible. The MP-100 is the most affordable scanner in the MP range.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height 18mm
• Needle cut: Round 0.6mm
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel separation (1kHz): > 22 dB
• Channel balance (1kHz): < 2.0 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 21 mN (18-23 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P100
• Cartridge type: without head shell

ATH-CKS50TW
ATH-CKS50TW truly wireless headphones combine advanced acoustic technology for stunning bass with a comfortable and secure fit, while a high-capacity battery provides up to 20 hours of powerful, continuous audio (up to 50 hours with the charging case). All you have to do is let the music take control.

The newly developed large-diameter drivers (9mm Solid Bass HD TWS drivers) deliver deep bass while the CKS50TW shape provides a snug fit - an important factor for truly wireless headphones as the airtight fit prevents the bass from escaping to deliver a unique and intimate music experience.

Make your voice heard with Qualcomm® cVc™ Generation 8.0
Enjoy improved microphone performance in calls, whether in the office, working from home or in an online class. The sidetone function of the CKS50TW also allows you to hear your own voice during calls for more natural-sounding conversations, feeling almost as if you weren’t wearing headphones at all.

Built-in button design for on-the-go operation
Audio-Technica’s ATH-CKS50TW wireless earbuds are designed for reliable, stress-free operation for a more enjoyable truly wireless listening experience. The left button adjusts the volume and switches between hear-through and noise-cancelling functions, while the right button lets you easily start/stop playback, skip between songs, or enable quick hear-through.

Rain and splash-proof design
The CKS50TW wireless earbuds boast an IPX4*-equivalent JIS protection rating. The splash-proof design means you never have to worry about keeping your truly wireless earbuds dry in sudden rain showers or when exercising.

*An IPX4-equivalent rating signifies the product will not be adversely affected by water splashing from any direction. This rating does not ensure protection in hot and humid locations such as baths and showers. The product is not completely waterproof.

Greater customization
Personalize the operation of your Audio-Technica earbuds via Audio-Technica’s Connect app, available from both Apple and Google Play. Take full control of your sound, switching between codecs, experimenting with equalizer pre-sets or adjusting your volume levels. You can even use the app to help locate your earbuds, so you’ll always have a stunning soundscape to accompany your day to day.

Interruption-free listening

Packed full of useful functions, the CKS50TW earbuds are compact, with a unique antenna structure designed to ensure stable connectivity while fitting in limited space. This helps prevent sound from being interrupted even in train stations or other crowded locations.

The ATH-CKS50TW earbuds also feature Qualcomm® TrueWireless Mirroring.

Independent transmission to the left and right sides reduces sound interruptions and delays for videos on all devices, including Android and iOS smartphones.

Automatic power-on and fast pair convenience

Once paired with your device, Audio-Technica’s CKS50TW wireless headphones automatically turn on and connect to your Android or Google device** when they are removed from the case for quick usability. When the truly wireless earbuds are put back in the case, they power down and begin charging. The power can also be turned on/off directly from the headphones.

** Only one Android device can be paired by using Fast Pair. Google and Android are trademarks of Google LLC.

Check up on your charge with LED indicators

The CKS50TW’s four LED indicators light up or flash whenever the charging case is opened or closed, so the user can see the charging status or remaining charging case battery power at a glance.

Sony’s 360 Reality Audio certified

The combination of 360 Reality Audio and Audio-Technica’s long-cultivated acoustic technology allows listeners to fully experience the world of sound envisioned by the creators.

Features
Bluetooth® 5.2
50 hour battery (20 hours in the earbuds + 30 hours in the charging case)
Fast charging support - 10 minutes = 90 minutes of power (approx)
Multi-point pairing function for registering multiple devices
9mm Solid Bass HD TWS drivers
Noise-cancelling mode
Hear-through function
Built-in mic and controls
IPX4
Qualcomm® cVc™ Generation 8.0
Qualcomm® TrueWireless Mirroring
SCMS-T protected content and 1seg broadcasting support
Voice guidance function*1
Compatible with Sony’s 360 Reality Audio*2
*1 Voice guidance can be used for notifications, including power and pairing statuses as well as remaining battery level (High, Medium, or Low).
*2 Requires use of subscription to compatible online music service – subscription fees may apply. Compatible services may not be available in certain countries/regions. Please visit https://www.sony.net/360RA to check compatibility of the service. "SONY'' is a registered trademark of Sony Group Corporation.

Specifications
Headphones
Type Dynamic
Driver Diameter 9 mm
Frequency Response 5 to 20,000 Hz
Sensitivity 110 dB/mW
Impedance 20 ohms
Weight Headphones: Approx. 8 g (0.28 oz) (L side), approx. 8 g (0.28 oz) (R side); Charging case: Approx. 60 g (2.1 oz)
Charging Time Headphones: Approx. 3 hours
Charging case: Approx. 3 hours
The figures above depend on operating conditions.
Operating Temperature 5 °C to 40 °C (41 °F to 104 °F)
Operating Time Continuous transmission time (music playback): Max. approx. 20 hours (headphones), Max. approx. 50 hours (if charging case is used in combination)
The figures above depend on operating conditions.
Microphone Type MEMS type
Microphone Sensitivity -38 dB (1 V/Pa, at 1 kHz)
Microphone Frequency Response 100 to 8,000 Hz
Microphone Polar Pattern Omnidirectional
Power Supply Headphones: DC 3.7 V lithium ion battery
Charging case: DC 3.7 V lithium ion battery
Water-Resistant (drip-proof) Performance IPX4
Headphones only
Accessories Included USB charging cable (30 cm (12"), USB Type-A / USB Type-C), Eartips (XS, S, M, L)
Notes For product improvement, the product is subject to modification without notice.
Bluetooth®
Bluetooth® Version Bluetooth version 5.2
Operating Range Line of sight - approx. 10 m (33')
Maximum RF Output 10 mW EIRP
Frequency Band 2.402 GHz to 2.480 GHz
Modulation Method GFSK, Pi/4DQPSK, 8DPSK
Spread Spectrum Method FHSS
Compatible Bluetooth Profiles A2DP, AVRCP, HFP
Support Codec Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, AAC, SBC
Supported Content Protection Method SCMS-T
Supported Sample Rates 44.1 kHz, 48 kHz
Supported Bit Rates 16 bit, 24 bit
When using Qualcomm® aptX™ Adaptive audio.
Transmission Band 20 to 20,000 Hz

Despite the tight tolerances of the hole in the center of the vinyl,

(0.286'' +0.001'' / -0.002''),

it sometimes happens that the hole is less than 0.284'' min.

In solution to this problem, we offer you our reamer

STABLE 33.33

Completely redesigned to allow you better control when correcting the diameter in the center of your vinyl, this small tool is very

simple to use.

You can now easily correct this small deviation of the diameter in the center of your vinyls which were too tight to put on your turntable.

Video: https://youtu.be/b8l5BRlgSHM

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck
foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: Technics SL-1200MK7, SL-1200GR, Denon VL12 Prime, Reloop RP-8000 MK2, Pioneer PLX-1000/ 500
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with trong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Rear cable access hole with cover
• Protective egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 49 x 42,3 x 21 cm
Inner: 48 x 41,3 x 20 cm

Weight: 4,55 kg / 10.01 lbs

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick &
pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: NI S2 MK3, Pioneer DDJ-400/ RB/ SB3, Akai MPC X/ Renaissance,
Roland DJ-707M
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with strong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Removable front access panel
• Fully lined interior egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 56 x 49 x 21 cm
Inner: 55 x 48 x 20

Weight:4,3 kg | 9,5 lbs

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. This flight case also features heavy duty spring loaded handles for a secured lift & load.

U91073BL UDG Ultimate Flight Case Pioneer DJM-V10 Black not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

FEATURES
• Fits: 1x Pioneer DD DJM-V10
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable cable & PSU storage cover panel
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Extra-wide solid aluminum profiles
• High grade aluminium UDG logo plate
• UDG heavy-duty spring-loaded handles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Recessed butterfly twist latch lock

OUTER DIMENSIONS

WIDTH
57,10cm

HEIGHT
49,00cm

DEPTH
22,00cm

INNER DIMENSIONS

WIDTH
53,390cm

HEIGHT
44,00cm

DEPTH
14,00cm

WEIGHT
7,90kg

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. In addition, in the UDG Ultimate Flight Case NI Traktor Kontrol S2 MK3 Black Plus (Laptop Shelf), there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces. This flight case also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case NI Traktor Kontrol S2 MK3 Black Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

• Weight: 11,80 kg / 25.96 lbs
• EAN: 8718969213110
• Outer Dimensions (W x H x D): 56.4 x 40.8 x 20.6 cm | 22.2 x 16.1 x 8.1 inch
• Inner Dimensions (W x H x D): 49 x 26.7 x 4.6 cm | 19.3 x 10.5 x 1.8 inch
• Material: Heavy duty construction of 9 mm thick plywood

Protection:
• Improved powder coated and anodized hardware
• High density diamond embossed EVA foam & carpeted protective padding
• Dual anchor rivets with included washer
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corners

Extra's:
• Convenient 80 mm space at rear for connections & PSU storage
• Cable access hole with removable UDG emblem cover
• Removable front access panel
• Adjustable laptop shelf
• Heavy duty construction of 9 mm thick plywood
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip"
pattern
• High grade aluminium UDG logo plate
• Sturdy construction
• Recessed butterfly twist latch lock

Fits:
• 1 x NI Traktor Kontrol S2 MK3 + 1 x Laptop + Accessories

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal “Stage Grip” pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminum profile & massive UDG logo embossed ball corners are incorporated to ensures longevity & maintaining a permanently attractive, professional design. In addition, in the UDG Ultimate Flight Case Multi Format XL Black MK3 Plus (Laptop Shelf), there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces. This flight case also features heavy duty spring loaded handles for a secured lift & load.

UDG Ultimate Flight Case Multi Format XL Black MK3 Plus (Laptop Shelf) not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.

• Weight: 12,50 kg / 27.5 lbs
• EAN: 8718969212687
• Outer Dimensions (W x H x D): 65.1 x 45.7 x 26.4 cm | 25.6 x 17.9 x 10.4 inch
• Inner Dimensions (W x H x D): 55.5 x 33.7 x 4.5 cm | 21.8 x 13.3 x 1.8 inch
• Material: Heavy duty construction of 9 mm thick plywood

Protection:
• Extra-wide black solid aluminum profiles
• Secure stacking due to stackable ball corners
• Sturdy construction
• Full padded interior keeps controller well-protected
• High density diamond embossed EVA foam protective padding

Extra's:
• Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
• Removable case lid
• Adjustable laptop shelf

Fits:
• Laptop up to 19",
• Pioneer DDJ-REV1, DDJ-400, DDJ-RR, DDJ-SR2, DDJ-SR, DDJ-RB, DDJ-SB3, DDJ-SB2, DDJ-WeGO4, Toraiz SP-16,
• NI Traktor Kontrol S3, S5, S4 MK3, S4 MK2, S2 MK3, S2 MK2,
• Akai APC-40, APC-40 MK2, MPC Renaissance, MPK-25, MPD32,
• Numark Mixtrack Pro FX, Mixtrack Platinum FX, NVII, Mixtrack 2, Mixtrack Pro, Mixtrack Pro II, Mixtrack Pro 3, Mixtrack Quad, Mixtrack Platinum,
• Denon DJ Prime Go, MC-6000 MK2, MC-6000, MC-4000, MC-3000,
• Novation AFX, 25SL MK2,
• American Audio VMS-4, VMS-5,
• Reloop Terminal Mix-4, Terminal Mix-2, Beatpad, Beatpad 2, Beatmix 2, Digital Jockey III,
• Roland DJ-202,
• Behringer CMD-Studio,
• Mixars Primo,
• Stanton DJC-4,
• Gemini G4V DJ,
• Hercules DJ Console 4-Mx,
• Vestax VCI-400, VCI-380,
• or similar size controllers

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime 2? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime 2, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime 2
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Outer Dimensions (W x H x D) 68.5 x 42.6 x 14.9 cm | 26.9 x 16.8 x 5.8 inch
Inner Dimensions (W x H x D) 65.1 x 41.2 x 12.5 cm | 25.6 x 16.2 x 4.9 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Protective egg-crate foam
Extra's Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap
Fits Denon DJ Prime 2 Controller

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let’s you safely store your digital controller (such as the Native Instruments S3/ S4 MK3/ S2 MK3 or Pioneer DDJ-REV1/ 400 or Numark Mixtrack Pro FX) in the main compartment. The UDG Controller Sleeve is available in 3 sizes: Medium, Large & Extra Large skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,70 kg / 3.74 lbs
• EAN: 8717228279225
• Outer Dimensions (W x H x D): 56.5 x 37 x 18 cm | 22.2 x 14.5 x 7.1 inch
• Inner Dimensions (W x H x D): 54 x 34 x 9 cm | 21.3 x 13.4 x 3.5 inch
• Material: Water repellent laminated 600D Polyester exterior

Protection:
• Egg Crate interior protects jog wheels, faders & buttons
• Adjustable foam inserts to customize main compartment to your gear

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• NI Traktor Kontrol S3, S2 MK3, S4 MK3, S5, S2 MK2, S4 MK2, Komplete Kontrol S25,
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-SB3, DDJ-SB2, DDJ-SB, Toraiz SP-16,
• Numark Mixtrack Pro FX, Mixtrack Platinum FX, NVII/ NV, Mixtrack Pro II, Mixtrack Quad, Mixtrack Pro,
• Reloop Beatmix 2 MK2, Beatpad 2, Terminal Mix4, Terminal Mix 2,
• Denon DJ Prime Go, MC6000MK2, MC4000, MC3000, MC2000,
• Akai MPC Live II, MPC Renaissance, APC-40 MKII, MPK225, MPD232,
• Novation AFX, Nocturn 25, Launchkey 25, Impulse 25, 25SL MK2,
• Hercules DJControl Inpulse 300, Universal DJ, DJControl Jogvision/ Air+/ Air+S/ Wave, DJConsule 4-MX, DJConsole RMX 2,
• Korg Minilogue, Taktile 25,
• American Audio VMS 5/ VMS 4,
• Behringer CMD Studio 4A,
• Allen & Heath Xone 4D,
• Livid OHM 64,
• Arturia Origin Desktop,
• M-Audio Xponent, Axiom 25,
• Mixars Primo,
• Gemini G4V DJ, GMX, Slate 4/ 2,
• Roland DJ 202, JP-8080,
• Stanton SCS.4DJ,
• American Audio VMS 4 / 5,
• Vestax VCI-380, VCI-400DJ, VCM 600,
• or similar size controllers,

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let’s you safely store your digital controller (such as the NI S8 or Pioneer DDJ-RX/SX3) in the main compartment. The UDG Controller Sleeve is available in 2 sizes: Medium & Large skillfully designed to fit many different models of equipment safely during transport.

• Weight: 2,40 kg / 5.28 lbs
• EAN: 8717228279232
• Outer Dimensions (W x H x D): 73 x 43 x 14 cm | 28.7 x 16.9 x 5.3 inch
• Inner Dimensions (W x H x D): 71 x 40 x 11.5 cm | 27.6 x 15.7 x 4.5 inch
• Material: Water repellent laminated 600D Polyester exterior

Protection:
• Egg Crate interior protects jog wheels, faders & buttons
• Adjustable foam inserts to customize main compartment to your gear

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-RR, DDJ-SR2, DDJ-SR, DDJ-S1, DDJ-T1, DDJ-Ergo
• Pioneer XDJ-RR, XDJ-R1, XDJ-Aero
• NI Traktor Kontrol S3, Traktor Kontrol S8
• Denon DJ MC7000
• Numark NS6II, Mixtrack Platinum/ Pro 3, Mixdeck Quad, 4Trak, N4
• Reloop Mixon 4, Touch, Terminal Mix 8, Beatmix 4
• Roland DJ-505
• or similar size controllers

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let’s you safely store your digital controller (such as the Pioneer DDJ-SX/SR or Numark NS6) in the main compartment. The UDG Controller Sleeve is available in 3 sizes: Medium, Large & Extra Large skillfully designed to fit many different models of equipment safely during transport.

Fits to:

* Pioneer DDJ-RZ
* Pioneer DDJ-SZ
* Numark NS7 FX
* Numark NS7 2
* Denon MCX8000
* Denon DJ Prime 4

Specifications:

Color Black
Weight 2,72 kg / 5.984 lbs
Outer Dimensions 92.2 x 49.2 x 19.5 cm | 36.3 x 19.4 x 7.7 inch
Inner Dimensions 89.2 x 46.2 x 10.5 cm | 35.1 x 18.2 x 4.1 inch
Material Water repellent laminated 600D Polyester exterior
Protection Egg Crate interior protects jog wheels, faders & buttons. Adjustable foam inserts to customize main compartment to your gear
Extra's Easy grip zipper pulls. Convenient carry handle & padded shoulder strap
Fits Pioneer DDJ-SZ, Numark NS7 II/ NS7 FX

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Backpack lets you take a wide variety of your essential gear for your digital set up from one gig to the next. It let’s you safely store your digital controller (Pioneer DDJ-SX3, Native Instruments S8) in the main compartment while in the side entry laptop compartment you can store up to 19” laptop. It has enough space in the two front pockets to store all your other necessities; hard drives, headphone, cables & accessories and is fully padded in all the right places for the ultimate in protection. The backpack has a 4-method carrying system. The UDG Controller Backpack is available in 2 sizes: Medium & Large skillfully designed to fit many different models of equipment safely during transport.

• Weight: 3,95 kg / 8.69 lbs
• EAN: 8717228277481
• Outer Dimensions (W x H x D): 73 x 43 x 22.5 cm | 28.7 x 16.9 x 8.9 inch
• Inner Dimensions (W x H x D): 70 x 40 x 10 cm | 27.6 x 15.7 x 3.9 inch
• Material: Water repellent laminated 600D Polyester exterior

Protection:
• Adjustable foam inserts to customize main compartment to your gear

Extra's:
• 4 compartments: main: for controller, side: for laptop up to 19”, front: 2x for headphone, hard drives, cables & accessories
• 4-method carrying system
• Easy grip zipper pulls
• Convenient carry handle & padded shoulder strap

Fits:
• Up to 19" laptop
• Pioneer DJ DDJ-FLX6, DDJ-1000SRT, DDJ-800, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-RR, DDJ-SR, DDJ-S1, DDJ-T1
• Pioneer DJ XDJ-RR, XDJ-R1, XDJ-Aero
• NI Traktor S8
• Denon DJ Prime 2, MC7000
• Numark NS6II, NS6, 4Trak, N4, Mixdeck Quad
• Rane One,
• Reloop Mixon 4, Touch
• Roland DJ 505
• or similar size controllers

The UDG Ultimate Laptop Stand is a portable compact laptop or desk stand with rugged, reliable and ergonomic design for universal use. It is perfect for supporting DJ equipment like laptop, controller, mixer etc. It could be disassembled easily and
is constructed from solid steel with a scratch resistant powder coating and features no-slip support arms.

This table desk stand has 4 line-it-up bars and 2 support bars for with solid adjustable 4 height alignment, comfort, and convenience. Set it low for a minimal clearance of 6.75” or set it up to 11.5” high. The 10.75” long support arms hold gear with a width of 9” or greater and, by adding the included extensions, it can be extended to fit that extra wide 17" laptop or other gear.

The laptop stand design leaves your laptop or other device well ventilated and reduces the risk of overheating.

FEATURES:

• Adjustable height / width
• Fits laptops 13-17 inches, iPads and Controller
• Solid and easy to assemble laptop/controller stand for DJs/Producers
• Safe & reliable device placement
• Rugged, durable metal construction, anti-scratch resistant powder coating
• Stable & ergonomic tabletop design

Dimensions:
28 x 26 x 35 cm (Breite x Höhe x Tiefe)
11 x 10,2 x 13,7 inch (Width x Height x Depth)

Weight:
1,4 kg
3 lbs

The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360° well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear. Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.

FEATURES
• Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear
• Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
• 360 degree rotatable laptop tray
• 2-clicks quick-release mechanism for easy assembly and breakdown
• Z-style set-up position to accommodate heavier production gear
• Airflow constructed tray prevents equipment from overheating
• Rugged, durable metal construction, anti-scratch resistant powder coating
• No loose parts
• Stable, sturdy and strong
• Easy to fold flat
• Protective transportation sleeve included

Dimensions

Folded:
28,0cm x 27,3cm x 3,5cm

Unfolded:
28,0cm x 27,3cm x 26,5-38,0cm

Laptop-Shelf:
20,0cm x 23,0cm

Weight/Max. Load:
1,85kg/15,00kg

A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio Arrow/ Apollo Solo? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Arrow/ Apollo Solo, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

• Weight: 0,57 kg / 1.254 lbs
• EAN: 8718969211673
• Outer Dimensions (W x H x D): 22 x 16.6 x 6.9 cm | 8.7 x 6.5 x 2.7 inch
• Inner Dimensions (W x H x D): 18 x 12.6 x 5.9 cm | 7.1 x 4.9 x 2.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Universal Audio Arrow / Apollo Solo

A Digital DJ looking for a professional, durable case solution for your Pioneer RMX1000 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Pioneer RMX-1000 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,45 kg / 0.99 lbs
• EAN: 8717228278310
• Outer Dimensions (W x H x D): cm: 37 x 19 x 7 | inch: 14.5 x 7.5 x 2.8
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper puller
• Convenient carry handles

Fits:
• Pioneer RMX-1000 Controller

A Digital DJ/Producer looking for a professional, durable case solution for your Rane One? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Rane One, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Rane One
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
72,00cm

HEIGHT
43,00cm

DEPTH
14,00cm

INNER DIMENSIONS

WIDTH
68,80cm

HEIGHT
34,70cm

DEPTH
6,80cm

WEIGHT
2,27kg

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Launchpad X? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Launchpad X, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Launchpad X
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

WIDTH
30,20cm

HEIGHT
30,20cm

DEPTH
4,00cm

WEIGHT
0,99kg

A Digital DJ/Producer looking for a professional, durable case solution for your Novation Circuit Tracks/Rhythm? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Novation Circuit Tracks/Rhythm, this case is perfect for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Novation Circuit Tracks/ Rhythm
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

OUTER DIMENSIONS

WIDTH
29,50cm

HEIGHT
25,00cm

DEPTH
7,00cm

WEIGHT
0,99kg

A Digital DJ looking for a professional, durable case solution for your NI Traktor Kontrol S4 MK3/ S2 MK3 controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Traktor Kontrol S4 MK3/ S2 MK3 controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 1,89 kg / 4.158 lbs
• EAN: 8718969213073
• Outer Dimensions (W x H x D): 61 x 38 x 13 cm | 24 x 14.9 x 5.1 inch
• Inner Dimensions (W x H x D): 58.5 x 35.5 x 8.4 cm | 23 x 13.9 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Shoulder strap

Fits:
• NI Traktor Kontrol S4 MK3/ S2 MK3 Controller
• Pioneer DDJ-REV1
• Numark Mixstream Pro
• Behringer RD-8
• Roland DJ-707M

A Digital DJ looking for a professional, durable case solution for your Korg Electribe/ Electribe Sampler? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Electribe/ Electribe Sampler, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969210065
• Outer Dimensions (W x H x D): cm: 39.3 x 24.3 x 5.5 | inch: 15.5 x 9.6 x 2.2
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Soft fleece interior

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Korg Electribe, Electribe Sampler

UDG developed a light EVA Midi Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 2,36 kg / 5.192 lbs
• EAN: 8717228279867
• Outer Dimensions (W x H x D): 73.0 x 44.0 x 14.0 cm | 28.7 x 17.3 x 5.5 inch
• Inner Dimensions (W x H x D): 71.5 x 41.5 x 10.0 cm | 28.2 x 16.3 x 3.9 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, XDJ-RR, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-S1/T1, XDJ-Aero, XDJ R1,
• NI Traktor Kontrol S8,
• Numark NS6II/ NS6, Mixdeck Quad
• Denon DJ MC7000
• Reloop Mixon 4

A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

• Weight: 0,54 kg / 1.188 lbs
• EAN: 8718969211611
• Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3 inch
• Inner Dimensions (W x H x D): N/A
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Black soft fleece interior

Extra's:
• Heavy duty handle
• Easy grip zipper puller

Fits:
• Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
• NI Komplete Audio 6 MK2,
• Roland TR-6S,
• Motu UltraLite AVB, UltraLite MK5
• and extra cables

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime Go? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime Go, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime Go
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls

EAN 8718969214339
Color Black
Weight 1,57 kg / 3.454 lbs
Outer Dimensions (W x H x D) 48.5 x 36.0 x 12.4 cm | 19.0 x 14.2 x 4.9 inch
Inner Dimensions (W x H x D) 41.7 x 27.9 x 11.4 cm | 16.4 x 10.9 x 4.5 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Extra's Easy grip zipper puller
Convenient carry handles
Shoulder strap
Fits Denon DJ Prime Go Controller

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,40 kg / 3.08 lbs
• EAN: 8717228279843
• Outer Dimensions (W x H x D): 48.5 x 36.0 x 12.4 cm | 19.1 x 14.2 x 4.9 inch
• Inner Dimensions (W x H x D): 47.0 x 34.0 x 8.4 cm | 18.5 x 13.4 x 3.3 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-200, Toraiz SP-16, DDJ-WeGO /2 /3 /4,
• NI Traktor S2 /MK2, Maschine /MK2,
• Denon DJ Prime Go, MC6000 MK2, MC3000, MC2000,
• Numark Mixtrack II / Pro II,
• Akai MPC Live/ II, APC40 /MK2, MPD232, MPD32,
• Reloop Jockey 3 Remix, Mixage IE, Terminal Mix 2,
• Novation Peak, Zero SL MK2, 25SL MK2,
• M-Audio Xponent, Oxygen 25, Trigger Finger Pro,
• Stanton DJC 4, SCS.4DJ,
• Roland Aira MX-1, TR-707, TR-8, TR-8S,
• Vestax VCI-300, VCI-380, VCI-100 /MK2,
• Gemini Slate 2,
• Hercules DJ Control Wave,DJ Control Air S Series,
• Arturia Keylab 25

UDG developed a light EVA MIDI Controller Hardcase designed for life on the road. The UDG Controller Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects jog wheels, faders and buttons of various sized equipment. The UDG Controller Hardcases are available in 4 sizes, skillfully designed to fit many different models of equipment safely during transport.

• Weight: 1,75 kg / 3.85 lbs
• EAN: 8717228279850
• Outer Dimensions (W x H x D): 61.0 x 38.0 x 12.5 cm | 24.0 x 14.9 x 4.9 inch
• Inner Dimensions (W x H x D): 59.3 x 35.3 x 9.0 cm | 23.3 x 13.9 x 3.5 inch
• Material: Durashock molded EVA foam
• Protection: Water repellent laminated nylon exterior, Egg Crate interior protects jog wheels, faders, buttons

Extra's:
• Easy grip zipper pulls
• Convenient carry handle

Fits:
• Pioneer DDJ-REV1, DDJ-400, DDJ-RB, DDJ-RR, DDJ-SB3, DDJ-SB2, DDJ-SR2, DDJ-SR, DDJ-Ergo V
• NI Traktor Kontrol S3, S4 MK3, S2 MK3, S5, S4 MK2, S2 MK2, Maschine Studio, Komplete Kontrol A25, Komplete Kontrol S25
• Numark Mixstream Pro, Mixtrack Pro FX, Mixtrack Platinum FX, Mixtrack Platinum, NVII, Mixtrack Pro 3, Mixtrack Quad, N4, iDJ Pro
• Denon MC4000
• Akai MPC Renaissance, MPK225, MPK25
• Reloop Beatmix 4
• Novation 25 SL MK2, Nocturn 25, Impulse 25
• Roland DJ-707M, System-1 Plug Out Synthesizer
• Hercules DJControl Inpulse 300
• M-Audio Axiom 25
• Allen & Heath Xone 4D
• Mixars Primo
• Alesis Q25, QX25
• Korg Modwave, Opsix

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features:
• Belt-driven
• Built-in phono stage and Bluetooth for wireless use
• Anti-resonant sub-platter design
• Heavy 8mm, zero-resonance blasted-glass platter
• Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
• Ortofon OM5e moving magnet pickup
• 8,6“ highly precise and light aluminium tonearm
• Low friction, vibration free tonearm bearing
• One-piece tonearm design with integrated headshell
• Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
• Vibration absorbing feet
• Elegant dustcover with adjustable hinges
• Available in High-Gloss Black, Satin White and Walnut
• Hand-made in Europe

Technical Specifications:
• Speed: 33,45 (manual speed change)
• Principle: Belt drive
• Speed variance: 33: 0.7% 45: 0.6%
• Wow & Flutter: 33: 0.25% 45: 0.23%
• Platter Heavy: 8mm, blasted-glass platter with felt mat
• Main bearing: Stainless steel/brass
• Signal to noise: 65dB
• Tonearm: 8.6” aluminium
• Effective arm length: 218.5 mm
• Overhang: 22.0 mm
• Effective tonearm mass: 8.0 g
• Counterweight for mass: 5 - 10g (pre-mounted)
• Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
• Outputs: RCA Line, RCA Phono, Bluetooth
• Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
• Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
• Power consumption: 3 Watt max
• Dimensions: 415x100x335 mm (WxHxD)
• Weight: 3.8 kg net

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)