DJ Equipment 200 Items

Puristic direct drive turntable with Ortofon 2M Blue cartridge

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

NEWLY DEVELOPED THORENS TP 150 TONEARM

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.
The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

SPECIAL FEATURES:
• Stable and super silent direct drive
• THORENS TP 150 tonearm
• Detachable SME Headshell
• Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
• Pre installed cartridge Ortofon 2 M Blue

Specifications:
• Function: puristic manual record player
• Drive system: direct drive
• Motor: DC motor 24V
• Speeds: 33-1/3, 45 rpm.
• Speed select: electronical
• Platter: 12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight
• Tonearm: Thorens TP 150 with SME headshell
• Cartridge: Ortofon 2M Blue with nude elliptical stylus
• Phono preamplifier: no
• Anti-Skating: anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing
• Shut off: no
• Power supply: external power supply 24V DC
• Dimensions: 420 x 150 x 360 mm (W x H x D)
• Weight: 7,2 kg
• Scope of delivery: power supply, acrylic dust cover, RCA cable

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

Disc Flattener is a long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

The ORB AUDIO DF-01i A+ is a meaningful further development of the DF-01i and was designed for all vinyl formats: singles, maxis, mini LPs and LPs. The device is able to heat corrugated records by a defined heating in three different temperature programs and to level the record again.

Waved records have a considerable influence on the optimal scanning process of the pickup system and lead to higher ambient noise, increased wear of the scanning needle and the sound carrier as well as poorer sound reproduction. Some records cannot be played back at all.

The ORB DF-01i A+ record iron heats up the vinyl, smoothes the surface and improves the conditions for an optimal scanning process. Pickups and records benefit from durability and quality. The heat treatment of the vinyl relaxes the material, which is very advantageous for the sound reproduction of the record. The differences in sound between wavy and smoothed vinyl are clearly noticeable. The ORB iron improves playback quality and preserves the value of your valuable pickups and vinyl treasures.

The ORB iron consists of a solid metal frame construction with two heating surfaces and an integrated timer at three temperature programs. The temperature programs Low, Medium and High are adjustable. The temperature program High is especially suitable for LP's with 180-200 grams. The Disc Flattener is designed for 7", 10" and 12" disc formats and is not suitable for shellac discs.

The + version comes with an adapter that also allows flat vinyl ironing.

Vinyls with groove guard with raised platemark are supported by both versions by default.

Specifications
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

AFI flat.2 Record Flattener / Relaxer
The Audio Fidelity Improvement flat.2 is a cutting-edge multifunctional record flattener and relaxer. It flattens vinyl LPs, Maxis and Singles. Using special flat mats and high-quality control electronics the flat.2 achieves an utterly even distribution of heat and therefore results that have been out of reach until now.

Preset programs provide for very simple handling. The Standard program reliably eliminates most of the warps. In addition to that, there is an Expert program with flexible settings.

The flat.2 works very precisely and has several protective mechanisms to ensure very high product and process safety. Allocation of temperature on the surface as well as at the top and bottom is homogenous. Deviation of the target value represents less than 0,25 K.

Another distinctive feature of the flat.2 is the Relaxation program. The vinyl record is heated (and afterwards cooled) very slowly, evenly and controlled to temper the record. This thermal process of tempering is a traditional physical method and causes a considerable sound improvement in most cases.

A slim construction and first-class manufacturing out of special hard glass emphasize the elegant and timeless design.

Characteristics

• special flat mats for even distribution of temperature on every spot of the vinyl record
• homogenous heating surfaces in the interior of the machine
• smart and separate control of top and bottom side
• high-quality magnetic switches for safe contact and longevity
• simple handling of standard programs
• special program of thermal relaxation / tempering for sound improvement
• high process safety due to error detection and temperature restriction mechanisms
• easy-care high-class surfaces made of hard glass
• made in Germany

Technical Specifications

• power input: max. 90 VA
• maximum temperature: 59° C (Standard program), 54-60° C (Expert program)
• deviation of target temperature: less than 0,25 K
• size: 400 x 55 x 500 mm
• weight: 8,7 kg

Review: http://www.afi-record-flattener.com/download/AFI_record_flattener_review_image-hifi_2018.pdf